MEASUREMENTS OF THE IONISING RADIATION LEVEL AT A NUCLEAR MEDICINE FACILITY PERFORMING PET/CT EXAMINATIONS.

This paper presents the results of radiation level measurements at workplaces in a nuclear medicine facility performing PET/CT examinations. This study meticulously determines the staff radiation exposure in a PET/CT facility by tracking the path of patient movement. The measurements of the instantaneous radiation exposure were performed using an electronic radiometer with a proportional counter that was equipped with the option of recording the results on line. The measurements allowed for visualisation of the staff's instantaneous exposure caused by a patient walking through the department after the administration of 18F-FDG. An estimation of low doses associated with each working step and the exposure during a routine day in the department was possible. The measurements were completed by determining the average radiation level using highly sensitive thermoluminescent detectors.

A ring-shaped recombination chamber for hadron therapy dosimetry.

An innovative recombination chamber has been designed for estimation of stray radiation doses and quality factors in hadron therapy. The chamber allows for determination of absorbed dose and recombination index of radiation quality in phantoms at small distances from simulated organs. The chamber body and electrodes are ring shaped, so the beam may be directed through the empty centre of the ring. The ionisation of the filling gas is caused by secondary or scattered radiation and can be related to the dose absorbed in the tissues close to the irradiated target volume.

A micro-gap, air-filled ionisation chamber as a detector for criticality accident dosimetry.

A micro-gap air-filled ionisation chamber was designed for criticality dosimetry. The special feature of the chamber is its very small gap between electrodes of only 0.3 mm. This prevents ion recombination at high dose rates and minimises the influence of gas on secondary particles spectrum. The electrodes are made of polypropylene because of higher content of hydrogen in this material, when compared with soft tissue. The difference between neutron and gamma sensitivity in such chamber becomes practically negligible. The chamber's envelope contains two specially connected capacitors, one for polarising the electrodes and the other for collecting the ionisation charge.

Characterisation of radiation field for irradiation of biological samples at nuclear reactor-comparison of twin detector and recombination methods.

Central Laboratory for Radiological Protection is involved in achieving scientific project on biological dosimetry. The project includes irradiation of blood samples in radiation fields of nuclear reactor. A simple facility for irradiation of biological samples has been prepared at horizontal channel of the nuclear reactor MARIA in NCBJ in Poland. The radiation field, composed mainly of gamma radiation and thermal neutrons, has been characterised in terms of tissue kerma using twin-detector technique and recombination chambers.

Cases of post-accident contamination with iodine 131I, registered in the Institute of Atomic Energy POLATOM in Swierk, Poland.

The paper presents four cases of post-accidental contamination with iodine (131)I, registered in the Radiation Protection Measurements Laboratory (LPD) of the Institute of Atomic Energy POLATOM. Two cases were registered during routine monitoring of internal exposures carried out at LPD laboratory, one case corresponds to in vivo measurements performed at LPD after Chernobyl accident in 1986, and the last case is associated with an emergency situation after an accident occurred in a Polish hospital. In all cases, thyroid measurements were performed; for hospital employees whole-body and urine measurements were also carried out.

Ionisation chamber containing boron as a neutron detector in medical accelerator fields.

A combination of the recombination principle of H(10) measurements with the use of the ionisation chambers containing boron has been presented, in order to increase the relative sensitivity of the chamber to neutrons by a factor close to the radiation quality factor of photoneutrons. Three types of the chambers were investigated. Two of them were filled with BF(3) and the third one contained electrodes covered with B(4)C. All the chambers were placed in paraffin moderators. The response of the chambers was investigated, depending on gas pressure and polarising voltage. The results showed that it was possible to obtain nearly the same response of the chamber to H(10) for photons and neutrons in a restricted energy range; however, further investigations are needed to make an optimum design.

A comparison of different recombination methods in mixed radiation fields at high energy accelerators.

Recombination chambers and different recombination methods have been used for dosimetry of mixed radiation fields at high-energy accelerators for over 40 years. This paper gives a short overview of 11 selected recombination methods used for the determination of H*(10) in mixed radiation fields at high-energy accelerators. A new correction factor is proposed, mainly in order to take into account the dependence of the chamber sensitivity on radiation quality. This factor depends only on the measurable index of radiation quality and can be determined for a particular chamber during the calibration in a reference field of neutron radiation. A comparison of the results obtained at high-energy accelerators showed that all the methods gave the same values of H(10), within a specified accuracy of about 20%, so all of them are suitable for monitoring complex mixed radiation fields at workplaces.

Investigations of recombination chambers for BNCT beam dosimetry.

A set of cylindrical recombination chambers, including a tissue-equivalent chamber and three graphite chambers filled with different gases-CO(2), N(2) and (10)BF(3), was designed for the dosimetry of therapeutic neutron radiation beams used for BNCT. The separation of the dose components is based on differences of the shape of the saturation curve depending on the LET spectrum of the investigated radiation. The measurements using all the chambers were performed in a reactor beam of NRI ReZ (Czech Republic) and in the reference radiation fields of a (252)Cf radiation source free in air or in filters.

The problems associated with the monitoring of complex workplace radiation fields at European high-energy accelerators and thermonuclear fusion facilities.

The European Commission is funding within its Sixth Framework Programme a three-year project (2005-2007) called CONRAD, COordinated Network for RAdiation Dosimetry. The organisational framework for this project is provided by the European Radiation Dosimetry Group EURADOS. One task within the CONRAD project, Work Package 6 (WP6), was to provide a report outlining research needs and research activities within Europe to develop new and improved methods and techniques for the characterisation of complex radiation fields at workplaces around high-energy accelerators, but also at the next generation of thermonuclear fusion facilities. The paper provides an overview of the report, which will be available as CERN Yellow Report.

Measurements of the neutron dose near a 15 Mv medical linear accelerator.

In this work, simplified recombination methods for routine estimation of dose equivalent in mixed (gamma and neutrons) radiation field outside the irradiation field of linear medical accelerators is considered. The author's earlier reported method of H(10) measurements, involving determination of the recombination index of radiation quality, Q(4) by tissue-equivalent recombination chamber was combined with the new method for determination of the photon to neutron dose ratio D(X)/D(n) from the ratio of ion collection efficiencies measured in the investigated radiation field and in two reference fields of gamma and neutron radiations. The method is suitable when the neutron contribution to the total absorbed dose, D(n)/D, is >3%.

Method for determination of gamma and neutron dose components in mixed radiation fields using a high-pressure recombination chamber.

A new method is proposed for the determination of dose components in mixed radiation fields (gamma + neutrons) using a recombination chamber. The method involves the determination of the ratio of ionisation currents measured at two different voltages applied to the chamber without the need of determining the saturation current, neither in the radiation field investigated nor during calibration. Therefore, the chamber can be filled with a gas under a pressure much higher than that used in presently available recombination chambers. This paper presents theoretically derived formulae supporting the method and the experimental results of dose component measurements using a high-pressure recombination chamber filled with methane. The method can be used for determining neutron and gamma dose components in the environment, especially in the vicinity of nuclear centres.

Radionuclide neutron sources in calibration laboratory--neutron and gamma doses and their changes in time.

The calibration laboratory, having standard neutron fields of radionuclide sources, should perform regular measurements of fields' parameters in order to check their stability and to get knowledge of any changes. Usually, accompanying gamma radiation is not of serious concern, but some personal dosemeters, old neutron dose equivalent meters with scintillation detectors and the dose meters of mixed radiation require the determination of this component. In the Laboratory of Radiation Protection Measurements in the Institute of Atomic Energy, Poland, the fields of radionuclide neutron sources (252)Cf, (241)Am-Be and (239)Pu-Be were examined for nearly 20 y. A number of detectors and methods have been applied for the determination of neutron ambient dose equivalent rate and for the determination of neutron and gamma dose components. This paper presents the recent results of measurements of gamma and neutron dose and dose equivalent, compared with the results accumulated in nearly 20 y.

A method for distinguishing between static and dynamic X-ray exposure of a personal TL-badge using the CCD camera TL reader.

This paper reports initial attempts to apply a thermoluminescent (TL) reader with CCD camera to identify cases of static and dynamic exposure of personal dosemeters to doses relevant for radiation protection. Standard MTS-N (LiF:Mg,Ti) and MCP-N (LiF:Mg,Cu,P) TL pellets with diameter of 4.5 mm and thickness of 0.9 mm were used in a standard DOSACUS/RADOS personal dosimetry badge (holder). Pb, Cu and Al filters were installed instead of the standard Al 264 mg cm(-2) filters used in the RADOS badge. The badges were exposed statically and dynamically to X rays ranging from 28 keV (molybdenum anode) to 125 keV (tungsten anode) and to 137Cs (662 keV) gamma rays. The absorbed doses (in tissue) ranged from 20 to 100 mSv. Detectors were readout in the CCD reader and 2-D images were collected. The results obtained indicated that it was possible to identify the static, front exposure of the personal dosemeters equipped with Cu filter for doses >20 mGy for X rays up to 125 keV.

A measuring system with a recombination chamber for neutron dosimetry around medical accelerators.

A measuring system for dosimetry of neutrons generated around medical electron accelerators is proposed. The system consists of an in-phantom tissue-equivalent recombination chamber and associated electronics for automated control and data acquisition. A second ionization chamber serves as a monitor of photon radiation. Two quantities are determined by the recombination chamber--the total absorbed dose and the recombination index of radiation quality. The ambient dose equivalent, H*(10), or neutron absorbed dose in an appropriate phantom, can be then derived from the measured values. Tests of the system showed that a 0.5% dose contribution of neutrons to the absorbed dose of photons could be detected and estimated under laboratory conditions. Preliminary tests at the 15 MV Varian Clinac 2300C/D medical accelerator confirmed that the measuring system could be used under clinical conditions. The H*(10) of the mixed radiation was determined with an accuracy of approximately 10%.

Recombination chambers filled with different gases--studies of possible application for BNCT beam dosimetry.

Recombination microdosimetric method (RMM), based on the phenomenon of initial recombination of ions is applied to determine the distribution of the absorbed dose versus linear energy transfer (LET). Usually, the recombination chambers used for RMM are filled with tissue-equivalent gas, but the response of the device can be adjusted to the actual needs by the use of different gases. Using a graphite chamber filled with nitrogen and 10BF3 it was shown that RMM can also be used with chambers containing these gases. This opens the possibility of designing a recombination chamber for the determination of the dose fractions due to gamma radiation, fast neutrons, neutron capture on nitrogen and high-LET particles from the (n,10B) reaction in simulated tissue with different contents of 10B. It was also necessary to improve the method for the determination of initial recombination at low polarising voltages, when volume-recombination and back-diffusion of ions are considerably high.

Dose equivalent measurements in a strongly pulsed high-energy radiation field.

The stray radiation field outside the shielding of high-energy accelerators comprises neutrons, photons and charged particles with a wide range of energies. Often, accelerators operate by accelerating and ejecting short pulses of particles, creating an analogue, pulsed radiation field. The pulses can be as short as 10 micros with high instantaneous fluence rates and dose rates. Measurements of average dose equivalent (rate) for radiation protection purposes in these fields present a challenge for instrumentation. The performance of three instruments (i.e. a recombination chamber, the Sievert Instrument and a HANDI-TEPC) measuring total dose equivalent is compared in a high-energy reference radiation field (CERF) and a strongly pulsed, high-energy radiation field at the CERN proton synchrotron (PS).