ABSTRACT
Boron-doped diamond (BDD) electrodes are the most effective and resistant electrodic materials to perform advanced oxidation processes. Having a reactor that can provide adequate hydrodynamic conditions is mandatory to use these electrodes effectively. In this work, the diamond anode electrochemical reactor (E3L-DAER) is designed to fulfill this necessity. Several features are included to improve its efficiency, like conic inlet/outlet, flow enhancers, and a reduced interelectrode gap. The fluid dynamic validation has been performed using computer fluid dynamics (CFD) calculations, residence time distribution (RDT) curves, and mass transfer analysis. The reactor has been made using a three-dimensional (3D) printing stereolithography (SLA) technique, which allows us to build chemical-resistant reactors with nonstandard and tailored features in a cheap and fast way. The obtained results demonstrate that the designed reactor has the required fluid dynamics properties to perform reliable BDD electrode studies and applications. Finally, a BDD electrode was used to test the production of different oxidants such as persulfate, peroxophosphate, and chlorine-derived species.
ABSTRACT
In this work, a new coating of boron-doped diamond ultra-nanocrystalline (U-NBDD), tailored to prevent massive formation of perchlorates during disinfection, is evaluated as electrode for the reclaiming of treated secondary wastewater by the electrochemically assisted disinfection process. Results obtained are compared to those obtained by using a standard electrode (STD) that was evaluated as a standard in previous research showing outstanding performance for this application. First tests were carried out to evaluate the chlorine speciation obtained after the electrolysis of synthetic chloride solutions at two different ranges of current densities. Concentrations of hypochlorite obtained using the U-NBDD anode at 25 mA cm-2 were 1.5-fold higher, outperforming STD anode; however, at 300 mA cm-2, an overturn on the behavior of anodes occurs where the amount of hypochlorite produced on STD anode was 1.5-fold higher. Importantly, at low current density the formation of chlorates and perchlorates is null using U-NBDD. Then, the disinfection of the real effluent of the secondary clarifier of a municipal wastewater treatment facility is assessed, where inactivation of Escherichia coli is achieved at low charge applied per volume electrolyzed (0.08 A h L-1) at 25 mA cm-2 using the U-NBDD. These findings demonstrate the appropriateness of the strategy followed in this work to obtain safer electro-disinfection technologies for the reclaiming of treated wastewater.
