ABSTRACT
Interfacial modification is vital to boost the performance of colloidal quantum-dot light-emitting diodes (QLEDs). We introduce phenethylammonium bromide (PEABr) as an interlayer to reduce the trap states and exciton quenching at the interface between the emitting layer (EML) with CdSe/ZnS quantum-dots and the electron transport layer (ETL) with ZnMgO. The presence of PEABr separates the EML and the ETL and thus passivates the surface traps of ZnMgO. Moreover, the interfacial modification also alleviates electron injection, leading to more improved carrier injection balance. Consequently, the external quantum efficiency of the PEABr-based red QLED reached 27.6%, which outperformed those of the previously reported devices. Our results indicate that the halide ion salts are promising to balance charge carrier injection and reduce exciton quenching in the QLEDs.
ABSTRACT
The self-emulsifying acrylate-based emulsions with solid content 45 wt.% were prepared in 3.5 h by reverse iodine transfer polymerization (RITP), and the polymer molecular weight (Mn) could be 30,000 g·mol-1. The influences of methacrylic acid (MAA) amount, soft/hard monomer mass ratio, and iodine amount on polymerization and latex were investigated. A moderate amount of ionized MAA was needed to stabilize the emulsion. Glass transition temperature (Tg) was decreased with the increasing mass ratio of soft/hard monomer. A higher iodine amount resulted in lower Mn. The increased Mn after chain extension of the polymer with water-insoluble monomers in iterative one-pot method proved the living of polymer. Compared with conventional emulsion polymerization, molecular weight (Mn) could be controlled, and Mn of polymer synthesized in RITP emulsion polymerization is higher; emulsion of polyacrylate-containing hydroxyl monomer units prepared by RITP emulsifier-free radical polymerization is more stable. Good properties, such as hardness, water resistance, adhesion, and increased value of maximum tensile of films modified by reaction of polyacrylate with melamine-formaldehyde (MF) resin, indicated potential application in baking coating.
ABSTRACT
To construct the self-assembly of metal-ion-induced well-ordered architectures based on calixcrowns, isomeric thiacalix[4]benzocrowns-4 1 and 2 with rigid and small crown units were employed as the new scaffolds. They all show remarkable selectivity for Ag(+) and their complexation ability towards Ag(+) results in two novel dimeric aggregates of calixcrowns, which were first evidenced by ESI-MS, (1)H and DOSY-NMR spectra. Ultimately, X-ray diffraction experiments confirmed unambiguously the existence of the two metal-ion-induced dimers in lower rim/lower rim mode, and showed that dimerization of calixcrown 1 or 2 in the presence of Ag(+) could form dimeric supramolecular cavity with a small inner room. Moreover, the positional isomerism of their crown units (o-benzocrown unit for ligand 1 and m-benzocrown unit for 2) led to a dramatic change in the configuration of the two dimeric cavities 1·Ag(+) and 2·Ag(+). For dimeric cavity 1·Ag(+), two silver centers seamed two thiacalix[4]crown molecules together and resided at the edge of the dimeric self-assembling cavity; for dimeric cavity 2·Ag(+), one Ag(+) stitched two thiacalixcrowns together and was encapsulated in the center of the self-assembling cavity, while the other Ag(+) is tied down to one end of the dimer. Consequently, as a result of the different construction of dimeric cavities 1·Ag(+) and 2·Ag(+) the extended structures of the complexes are also different. The neighbour self-assembling cavities 1·Ag(+) are mutually oriented side-by-side and form a 1-D rectilineal polymeric chain. While, the neighbour self-assembling cavities 2·Ag(+) arrange themselves in a typical head-to-tail fashion to form a zig-zag polymeric chain.
