ABSTRACT
Carbonaceous materials used in most electrochemical applications require high specific surface area, adequate pore size distribution, and high electrical conductivity to ensure good interaction with the electrolyte and fast electron transport. The development of transition metal doped graphene aerogels is a possible solution, since their structure, morphology, and electrical properties can be controlled during the synthesis process. This work aims to synthesize Ni-doped graphene aerogels to study the role of different nickel salts in the sol-gel reaction and their final properties. The characterization data show that, regardless of the nature of the Ni salts, the surface area, volume of micropores, and enveloped density decrease, while the porosity and electrical conductivity increase. However, differences in morphology, mesopore size distribution, degree of order of the carbon structure, and electrical conductivity were observed depending on the type of Ni salt. It was found that nickel nitrate results in a material with a broader mesopore distribution, higher electrical conductivity, and hence, higher electrochemical surface area, demonstrating that graphene aerogels can be easily synthesized with tailored properties to fit the requirements of specific electrochemical applications.
ABSTRACT
Iron aerogels have been synthesized by microwave heating for the first time. Therefore, it is essential to optimize this synthesis process to evaluate the possibility of obtaining nanometric materials with tailored properties and fitting them to the needs of different applications. Herein, the effect of the ratio between reagents and the time of synthesis on the final textural, morphological, and structural properties has been evaluated. The micro-meso-macroporosity of the samples can be tailored by modifying the ratio between reagents, whereas the time of synthesis has only a slight effect on the microporosity. Both the proportion between reagents and the time of synthesis are essential to controlling the nanometric morphology, making it possible to obtain either cluster- or flake-type structures. Regarding the chemical and structural composition, the samples are mainly composed of iron(II) and iron(III) oxides. However, the percentage of iron(II) can be modulated by changing the ratio between reagents, which implies that it is possible to obtain materials from highly magnetic materials to materials without magnetic properties. This control over the properties of iron aerogels opens a new line of opportunities for the use of this type of material in several fields of applications such as electrochemistry, electrocatalysis, and electrical and electronic engineering.
ABSTRACT
Additive manufacturing is an important and promising process of manufacturing due to its increasing demand in all industrial sectors, with special relevance in those related to metallic components since it permits the lightening of structures, producing complex geometries with a minimum waste of material. There are different techniques involved in additive manufacturing that must be carefully selected according to the chemical composition of the material and the final requirements. There is a large amount of research devoted to the technical development and the mechanical properties of the final components; however, not much attention has been paid yet to the corrosion behaviour in different service conditions. The aim of this paper is to deeply analyze the interaction between the chemical composition of different metallic alloys, the additive manufacturing processing, and their corrosion behaviour, determining the effects of the main microstructural features and defects associated with these specific processes, such as grain size, segregation, and porosity, among others. The corrosion resistance of the most-used systems obtained by additive manufacturing (AM) such as aluminum alloys, titanium alloys, and duplex stainless steels is analyzed to provide knowledge that can be a platform to create new ideas for materials manufacturing. Some conclusions and future guidelines for establishing good practices related to corrosion tests are proposed.
