Evaluation of the danger of a tailings pile belonging to an active mine through its characterization and a dispersion model.

Mining is one of the principal economic activities in Mexico, which in addition to bringing benefits to the population, causes health and environmental problems. This activity produces a lot of wastes, but the main one is tailings. In Mexico, these wastes are disposed of in the open air, and there is no control over them, so the particles of these wastes are dispersed by wind currents to the surrounding population. In this research, tailings were characterized, finding in them particles smaller than 100 microns; in this way, tailings can enter into the respiratory system and hence can cause diseases. Furthermore, it is important to identify the toxic components. The present work does not have previous research in Mexico, and it shows a qualitative characterization of the tailings from an active mine using different analytical techniques. In addition to the data obtained from the characterization of the tailings, as well as the concentration of the toxic elements found, which were Pb and As, a dispersal model was generated and used to estimate the concentration of particles in the wind generated at the studied area. The air quality model used in this research is AERMOD, where it uses emission factors and available databases provided by Environmental Protection Agency (USEPA); Moreover, the model was coupled with meteorological information from the latest generation WRF model. The modeling results estimated that the dispersion of particles from the tailings dam can contribute up to 10.15 µg/m3 of PM10 to the air quality of the site, which, according to the characterization of the samples obtained, could be dangerous for human health and can be estimated up to a concentration of 0.04 µg/m3 of Pb and 10.90 ng/m3 of As. It is very important to make this kind of research to know the risk which people around this disposal sites are exposed to.

Combination of Polymeric Superplasticizers, Water Repellents and Pozzolanic Agents to Improve Air Lime-Based Grouts for Historic Masonry Repair.

This paper presents the experimental procedure to develop air lime-based injection grouts, including polymeric superplasticizers, a water repellent agent and pozzolanic agents as additives. Our research focuses on the development of grouts to improve various characteristics simultaneously by combining different additions and admixtures. Aiming to improve the injectability of the grouts, in this study, different polymeric superplasticizers were added, namely polycarboxylated-ether derivative (PCE), polynaphthalene sulfonate (PNS) and condensate of melamine-formaldehyde sulfonate (SMFC). As a water-repellent agent, sodium oleate was used to reduce the water absorption. The enhancement of the strength and setting time was intended by using microsilica and metakaolin as pozzolanic mineral additions. Compatibility between the different admixtures and action mechanism of the different polymers were studied by means of zeta potential and adsorption isotherms measurements. Diverse grout mixtures were produced and investigated by assessing their injectability, fluidity, stability, compressive strength, hydrophobicity and durability. This research led to several suitable mixtures produced by using more than one component, to enhance efficiency and to provide better performance of grouts. According to the results, the grout composed of air lime, metakaolin, sodium oleate and PCE was found to be the most effective composition, improving the mechanical strength, injectability and hydrophobicity.