Synthesis of Fluorescent, Small, Stable and Non-Toxic Epitope-Imprinted Polymer Nanoparticles in Water.

Molecularly imprinted polymers (MIPs) are really interesting for nanomedicine. To be suitable for such application, they need to be small, stable in aqueous media and sometimes fluorescent for bioimaging. We report herein, the facile synthesis of fluorescent, small (below 200 nm), water-soluble and water-stable MIP capable of specific and selective recognition of their target epitope (small part of a protein). To synthesize these materials, we used dithiocarbamate-based photoiniferter polymerization in water. The use of a rhodamine-based monomer makes the resulting polymers fluorescent. Isothermal titration calorimetry (ITC) is used to determine the affinity as well as the selectivity of the MIP for its imprinted epitope, according to the significant differences observed when comparing the binding enthalpy of the original epitope with that of other peptides. The toxicity of the nanoparticles is also tested in two breast cancer cell lines to show the possible use of these particle for future in vivo applications. The materials demonstrated a high specificity and selectivity for the imprinted epitope, with a Kd value comparable with the affinity values of antibodies. The synthesized MIP are not toxic, which makes them suitable for nanomedicine.

A general photoiniferter approach to the surface functionalization of acrylic and methacrylic structures written by two-photon stereolithography.

Two-photon stereolithography (TPS) is an established additive fabrication technique allowing the voxel-by-voxel direct writing of even intricate 3D nano/microstructures via the polymerization of a photoresin. An obvious way to tune the chemical functionalities of such nano/microstructures is formulating a photoresin with the desired functional monomer(s). Unfortunately, this makes every photoresin "unique" in terms of viscosity and reactivity, thus requiring a tedious and often time-consuming optimization of its printing parameters. In this work, we describe a general approach for the chemical functionalization of TPS-written structures based on two commercial photoresins. Our strategy entailed the grafting of functional polymer layers via an innovative approach based on photoiniferter coupling to unreacted double bonds and photopolymerization. After writing woodpiles as 3D model structures, we demonstrated the viability of this approach by anchoring a photoiniferter via its photoinduced addition to the residual CC on the structure's surface triggered by green light. This in turn allowed for the blue light-mediated, surface-initiated photopolymerization of functional monomers. Molecularly imprinted polymer films were also easily synthesized by using the same approach on model honeycombs. The imprinted layers resulted in only a minimal increase in size with no effect on the geometrical features of the honeycombs. Overall, this strategy offers a general approach for the surface modification of TPS-written (meth)acrylic structures with a wide variety of functional polymers via photoiniferter polymerization.

An organic transistor for the selective detection of tropane alkaloids utilizing a molecularly imprinted polymer.

This study proposes a chemical sensing approach for the selective detection of tropane alkaloid drugs based on an extended-gate-type organic field-effect transistor (OFET) functionalized with a molecularly imprinted polymer (MIP). From the viewpoint of pharmaceutical chemistry, the development of versatile chemical sensors to determine the enantiomeric purity of over-the-counter (OTC) tropane drugs is important because of their side effects and different pharmacological activities depending on their chirality. To this end, we newly designed an OFET sensor with an MIP (MIP-OFET) as the recognition element for tropane drugs based on a high complementarity among a template (i.e., (S)-hyoscyamine) and functional monomers such as N-isopropylacrylamide and 2,2-dimethyl-4-pentenoic acid. Indeed, the MIP optimized by density functional theory (DFT) has succeeded in the sensitive and selective detection of (S)-hyoscyamine (as low as 1 µM) by the combination of the OFET with highly selective recognition sites in the MIP. The MIP-OFET was further applied to determine the enantiomeric excess (ee) of commercially available (S)-hyoscyamine, and the linearity changes in the threshold voltages of the OFET corresponded to the % ee values of (S)-hyoscyamine. Overall, the validation with tropane alkaloids revealed the potential of the MIP combined with OFET as a chemical sensor chip for OTC drugs in real-world scenarios.

Molecularly imprinted polymer nanoparticles-based electrochemical chemosensors for selective determination of cilostazol and its pharmacologically active primary metabolite in human plasma.

Molecularly imprinted polymer (MIP) nanoparticles-based differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) chemosensors for antiplatelet drug substance, cilostazol (CIL), and its pharmacologically active primary metabolite, 3,4-dehydrocilostazol (dhCIL), selective determination in human plasma were devised, prepared, and tested. Molecular mechanics (MM), molecular dynamics (MD), and density functional theory (DFT) simulations provided the optimum structure and predicted the stability of the pre-polymerization complex of the CIL template with the chosen functional acrylic monomers. Moreover, they accounted for the MIP selectivity manifested by the molecularly imprinted cavity with the CIL molecule complex stability higher than that for each interference. On this basis, a fast and reliable method for determining both compounds was developed to meet an essential requirement concerning the personalized drug dosage adjustment. The limit of detection (LOD) at the signal-to-noise ratio of S/N = 3 in DPV and EIS determinations using the ferrocene redox probe in a "gate effect" mode was 93.5 (±2.2) and 86.5 (±4.6) nM CIL, respectively, and the linear dynamic concentration range extended from 134 nM to 2.58 µM in both techniques. The chemosensor was highly selective to common biological interferences, including cholesterol and glucose, and less selective to structurally similar dehydroaripiprazole. Advantageously, it responded to dhCIL, thus allowing for the determination of CIL and dhCIL together. The EIS chemosensor appeared slightly superior to the DPV chemosensor concerning its selectivity to interferences. The CIL DPV sorption data were fitted with Langmuir, Freundlich, and Langmuir-Freundlich isotherms. The determined sorption parameters indicated that the imprinted cavities were relatively homogeneous and efficiently interacted with the CIL molecule.

Polydopamine-based molecularly imprinted thin films for electro-chemical sensing of nitro-explosives in aqueous solutions.

A sensitive electrochemical sensor was developed for the detection of nitro-explosives in aqueous solutions based on thin molecularly imprinted polydopamine films. Dopamine was identified in silico, based on DFT (density functional theory) calculations with the ωB97X-D/6-31G* basis set, as the best functional monomer and electropolymerized via cyclic voltammetry (CV) in the presence of carboxylic acid-based structural analogues ('dummy' templates) for two model nitro-explosives: TNT (2,4,6-trinitrotoluene) and RDX (Research Department eXplosive, 1,3,5-trinitroperhydro-1,3,5-triazine). This approach afforded a homogenous coverage of gold electrodes with imprinted films of tunable thickness. The electropolymerized molecularly imprinted polydopamine films allowed for a 105-fold sensitivity improvement over a bare gold electrode based on tracking the redox peaks of the targets by CV. This improved sensitivity is ascribed to the ability of the MIP to concentrate its target in proximity to the transduction element. The MIP films showed reproducible binding in phosphate buffer (10 mM, pH 7.4), with a dynamic range from 0.1 nM to 10 nM for both TNT and RDX and an increased selectivity over closely related structural analogues.

A Light-Triggerable Nanoparticle Library for the Controlled Release of Non-Coding RNAs.

RNA-based therapies offer a wide range of therapeutic interventions including the treatment of skin diseases; however, the strategies to efficiently deliver these biomolecules are still limited due to obstacles related to the cellular uptake and cytoplasmic delivery. Herein, we report the synthesis of a triggerable polymeric nanoparticle (NP) library composed of 160 formulations, presenting physico-chemical diversity and differential responsiveness to light. Six formulations were more efficient (up to 500 %) than commercially available lipofectamine in gene-knockdown activity. These formulations showed differential internalization by skin cells and the endosomal escape was rapid (minutes range). The NPs were effective in the release of siRNA and miRNA. Acute skin wounds treated with the top hit NP complexed with miRNA-150-5p healed faster than wounds treated with scrambled miRNA. Light-activatable NPs offer a new strategy to topically deliver non-coding RNAs.

A New Versatile Water-Soluble Iniferter Platform for the Preparation of Molecularly Imprinted Nanoparticles by Photopolymerisation in Aqueous Media.

The multi-step synthesis of a new water-soluble dithiocarbamate iniferter platform for the preparation of nanoparticles and -gels in aqueous solvents by photoinduced living-radical polymerisation is described herein. The water solubility of the dithiocarbamate iniferter was achieved by incorporating two unprotected glucose units into the iniferter structure by copper(I)-catalysed azide-alkyne cycloaddition ("click chemistry"). Molecularly imprinted nanoparticles (MIPs) specific for 2,4-dichlorophenoxyacetic acid and the corresponding non-imprinted particles (NIPs) were prepared in pure water by using the prepared iniferter as photoinitiator. Radioligand binding tests confirmed a high imprinting factor, and the living character of the iniferter was demonstrated by re-initiating a second photochemical polymerisation on the NIP nanoparticles in water by using ethylene glycol methacrylate phosphate. Our newly synthesised structure is a promising tool for iniferter-mediated photopolymerisations in aqueous media for the preparation of biocompatible nanomaterials with high potential for biomedical applications in a bottom-up fashion.

Rational synthesis of low-polydispersity block copolymer vesicles in concentrated solution via polymerization-induced self-assembly.

Block copolymer self-assembly is normally conducted via post-polymerization processing at high dilution. In the case of block copolymer vesicles (or "polymersomes"), this approach normally leads to relatively broad size distributions, which is problematic for many potential applications. Herein we report the rational synthesis of low-polydispersity diblock copolymer vesicles in concentrated solution via polymerization-induced self-assembly using reversible addition-fragmentation chain transfer (RAFT) polymerization of benzyl methacrylate. Our strategy utilizes a binary mixture of a relatively long and a relatively short poly(methacrylic acid) stabilizer block, which become preferentially expressed at the outer and inner poly(benzyl methacrylate) membrane surface, respectively. Dynamic light scattering was utilized to construct phase diagrams to identify suitable conditions for the synthesis of relatively small, low-polydispersity vesicles. Small-angle X-ray scattering (SAXS) was used to verify that this binary mixture approach produced vesicles with significantly narrower size distributions compared to conventional vesicles prepared using a single (short) stabilizer block. Calculations performed using self-consistent mean field theory (SCMFT) account for the preferred self-assembled structures of the block copolymer binary mixtures and are in reasonable agreement with experiment. Finally, both SAXS and SCMFT indicate a significant degree of solvent plasticization for the membrane-forming poly(benzyl methacrylate) chains.