The Role of Ligand Packing Frustration in Body-Centered Cubic (bcc) Superlattices of Colloidal Nanocrystals.

This paper addresses the assembly of body centered-cubic (bcc) superlattices of organic ligand-coated nanocrystals. First, examples of bcc superlattices of dodecanethiol-capped Au nanocrystals and oleic acid-capped PbS and PbSe nanocrystals are presented and examined by transmission electron microscopy (TEM) and grazing incidence small-angle X-ray scattering (GISAXS). These superlattices tend to orient on their densest (110) superlattice planes and exhibit a significant amount of {112} twinning. The same nanocrystals deposit as monolayers with hexagonal packing, and these thin films can coexist with thicker bcc superlattice layers, even though there is no hexagonal plane in a bcc lattice. Both the preference of bcc in bulk films over the denser face-centered cubic (fcc) superlattice structure and the transition to hexagonal monolayers can be rationalized in terms of packing frustration of the ligands. A model is presented to calculate the difference in entropy associated with capping ligand packing frustration in bcc and fcc superlattices.

Role of Halides in the Ordered Structure Transitions of Heated Gold Nanocrystal Superlattices.

Dodecanethiol-capped gold (Au) nanocrystal superlattices can undergo a surprisingly diverse series of ordered structure transitions when heated (Goodfellow, B. W.; Rasch, M. R.; Hessel, C. M.; Patel, R. N.; Smilgies, D.-M.; Korgel, B. A. Nano Lett. 2013, 13, 5710-5714). These are the result of highly uniform changes in nanocrystal size, which subsequently force a spontaneous rearrangement of superlattice structure. Here, we show that halide-containing surfactants play an essential role in these transitions. In the absence of any halide-containing surfactant, superlattices of dodecanethiol-capped (1.9-nm-diameter) Au nanocrystals do not change size until reaching about 190-205 °C, at which point the gold cores coalesce. In the presence of halide-containing surfactant, such as tetraoctylphosphonium bromide (TOPB) or tetraoctylammounium bromide (TOAB), the nanocrystals ripen at much lower temperature and superlattices undergo various ordered structure transitions upon heating. Chloride- and iodide-containing surfactants induce similar behavior, destabilizing the Au-thiol bond and reducing the thermal stability of the nanocrystals.

Ordered structure rearrangements in heated gold nanocrystal superlattices.

Small-angle X-ray scattering (SAXS) data reveal that superlattices of organic ligand-stabilized gold (Au) nanocrystals can undergo a series of ordered structure transitions at elevated temperature. An example is presented of a body-centered cubic superlattice that evolves into a hexagonal close-packed structure, followed by the formation of binary simple cubic AB13 and hexagonal AB5 superlattices. Ultimately the superlattice decomposes at high temperature to bicontinuous domains of coalesced Au and intervening hydrocarbon. Transmission electron microscopy revealed that the ordered structure transformations result from partial ligand desorption and controlled Au nanocrystal growth during heating, which forces changes in superlattice symmetry. These observations suggest some similarity between organic ligand-coated nanocrystals and microphase-segregated diblock copolymers, where thermally induced nanophase-segregation of Au and organic ligand influences the ordered arrangements in the superlattice.

Influence of composition on the performance of sintered Cu(In,Ga)Se2 nanocrystal thin-film photovoltaic devices.

Thin-film photovoltaic devices (PVs) were prepared by selenization using oleylamine-capped Cu(In,Ga)Se2 (CIGS) nanocrystals sintered at a high temperature (>500 °C) under Se vapor. The device performance varied significantly with [Ga]/[In+Ga] content in the nanocrystals. The highest power conversion efficiency (PCE) observed in the devices studied was 5.1 % under air mass 1.5 global (AM 1.5 G) illumination, obtained with [Ga]/[In+Ga]=0.32. The variation in PCE with composition is partly a result of bandgap tuning and optimization, but the main influence of nanocrystal composition appeared to be on the quality of the sintered films. The [Cu]/[In+Ga] content was found to be strongly influenced by the [Ga]/[In+Ga] concentration, which appears to be correlated with the morphology of the sintered film. For this reason, only small changes in the [Ga]/[In+Ga] content resulted in significant variations in device efficiency.

Chloroform-enhanced incorporation of hydrophobic gold nanocrystals into dioleoylphosphatidylcholine (DOPC) vesicle membranes.

Vesicles of dioleoylphosphatidylcholine (DOPC) formed by extrusion (liposomes) with hydrophobic alkanethiol-capped Au nanocrystals were studied. Dodecanethiol-capped 1.8-nm-diameter Au nanocrystals accumulate in the lipid bilayer, but only when dried lipid-nanocrystal films were annealed with chloroform prior to hydration. Without chloroform annealing, the Au nanocrystals phase separate from DOPC and do not load into the liposomes. Au nanocrystals with slightly longer capping ligands of hexadecanethiol or with a larger diameter of 4.1 nm disrupted vesicle formation and created lipid assemblies with many internal lamellar attachments.

Melting and Sintering of a Body-Centered Cubic Superlattice of PbSe Nanocrystals Followed by Small Angle X-ray Scattering.

The structural evolution of a body-centered cubic (bcc) superlattice of 6.6 nm diameter organic ligand-coated PbSe nanocrystals was studied in situ by small angle X-ray scattering (SAXS) as it was heated in air from room temperature to 350°C. As it was heated above room temperature, the superlattice contracted slightly, but maintained bcc structure up to 110°C. Once the temperature rose above 110°C, the superlattice began to disorder, by first losing long-range translational order and then local positional order. At temperatures exceeding 168°C, the nanocrystals sintered and oxidized, transforming into PbSeO(3) nanorods.

Solution-liquid-solid synthesis of CuInSe2 nanowires and their implementation in photovoltaic devices.

CuInSe2 (CIS) nanowires were synthesized by solution-liquid-solid (SLS) growth in a high boiling solvent using bismuth nanocrystals as seeds. The nanowires tended to be slightly deficient in In and exhibited either cubic or hexagonal crystal structure, depending on the synthesis conditions. The hexagonal structure, which is not observed in bulk crystals, appears to evolve from large concentrations of twin defects. The nanowires could be compressed into a free-standing fabric or paper-like material. Photovoltaic devices (PVs) were fabricated using the nanowires as the light-absorbing layer to test their viability as a solar cell material and were found to exhibit measurable PV response.

Reversible solvent vapor-mediated phase changes in nanocrystal superlattices.

Colloidal nanocrystals are being explored for use in a variety of applications, from solar cells to transistors to medical diagnostics and therapy. Ordered assemblies of nanocrystals, or superlattices, are one particularly interesting class of these materials, in which the nanocrystals serve as modular building blocks to construct nanostructures by self-assembly with spatial and temporal complexity and unique properties. From a fundamental perspective, the nanocrystals are simple molecular models that can be manipulated and studied to test statistical mechanical and thermodynamic models of crystallization and disorder. An article by Bian et al. in this issue of ACS Nano reports surprising new phase behavior in semiconductor nanocrystal superlattices: reversible transitions between non-close-packed body-centered cubic (bcc) and body-centered tetragonal (bct) structures, and close-packed face-centered cubic (fcc) structures, observed by real-time in situ grazing incidence small-angle X-ray scattering (GISAXS) measurements, upon solvent vapor exposure and increased interparticle separation. These studies offer new insight and raise new questions about superlattice structure and the forces that control self-assembly. Accompanying computer simulations show that ligand-ligand interactions are important. Furthermore, it appears that ligand-coated nanocrystals have more in common with soft microphase-separated materials, like diblock copolymers and surfactant assemblies, than previously realized.

Thickness-limited performance of CuInSe2 nanocrystal photovoltaic devices.

This paper reports our latest results using colloidal CuInSe2 nanocrystal inks to prepare photovoltaic (PV) devices. Thus far, devices with nanocrystal layers processed under ambient conditions with no post-deposition treatment have achieved power conversion efficiencies of up to 3.1%. Device efficiency is largely limited by charge carrier trapping in the nanocrystal layer, and the highest device efficiencies are obtained with very thin layers-less than 150 nm-absorbing only a fraction of the incident light. Devices with thicker nanocrystal layers had lower power conversion efficiency, despite the increased photon absorption, because the internal quantum efficiency of the devices decreased significantly. The thin, most efficient devices exhibited internal quantum efficiencies as high as 40%, across a wide spectrum. Mott-Schottky measurements revealed that the active region thickness in the devices is approximately 50 nm.

Alkyl passivation and amphiphilic polymer coating of silicon nanocrystals for diagnostic imaging.

A method to produce biocompatible polymer-coated silicon nanocrystals for medical imaging is shown. Silica-embedded Si nanocrystals are formed by HSQ thermolysis. The nanocrystals are then liberated from the oxide and terminated with Si-H bonds by HF etching, followed by alkyl monolayer passivation by thermal hydrosilylation. The Si nanocrystals have an average diameter of 2.1 nm ± 0.6 nm and photoluminesce with a peak emission wavelength of 650 nm, which lies within the transmission window of 650-900 nm that is useful for biological imaging. The hydrophobic Si nanocrystals are then coated with an amphiphilic polymer for dispersion in aqueous media with the pH ranging between 7 and 10 and an ionic strength between 30 mM and 2 M, while maintaining a bright and stable photoluminescence and a hydrodynamic radius of only 20 nm. Fluorescence imaging of polymer-coated Si nanocrystals in biological tissue is demonstrated, showing the potential for in vivo imaging.

Hydrophobic gold nanoparticle self-assembly with phosphatidylcholine lipid: membrane-loaded and janus vesicles.

Hybrids of hydrophobic sub-2-nm-diameter dodecanethiol-coated Au nanoparticles and phosphatidylcholine (PC) lipid vesicles made by extrusion were examined by cryogenic transmission electron microscopy (cryoTEM). The nanoparticles loaded the vesicles as a dense monolayer in the hydrophobic core of the lipid bilayer, without disrupting their structure. Nanoparticle-vesicle hybrids could also be made by a dialysis process, mixing preformed vesicles with detergent-stabilized nanoparticles, but this approach led to vesicles only partially loaded with nanoparticles that segregated into hemispherical domains, forming a Janus vesicle-nanoparticle hybrid structure.