ABSTRACT
A series of semi-crystalline multi-block thermoplastic polyurethanes (TPU), containing poly(butylene adipate) (PBA), polycaprolactone (PCL) and their equimolar mixture (PBA/PCL) as a soft segment was synthesized. The changes in the physical-mechanical and thermal properties of the materials observed in the course of a 36-month storage at room temperature were related to the corresponding structural evolution. The latter was monitored using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXS) and mechanical tests (tensile strength test). The effects of the composition of the soft segment on the phase separation and crystallization of the soft segment were analyzed in detail. It was found that the melting temperature of the crystalline phase increases with storage time, which is associated with hindering of the phase separation of the hard and soft segments of the TPU samples as it was detected by FTIR.
ABSTRACT
The influence of the hard segment nature on the crystallization kinetics of multi-block thermoplastic polyurethanes containing poly(butylene adipate) (PBA) as a soft segment was investigated. Using a combination of FTIR spectroscopy, time-domain 1H nuclear magnetic resonance (TD-NMR), differential scanning calorimetry (DSC), fast-scanning calorimetry (FSC) and wide-angle X-ray diffraction (WAXS), it was shown that aliphatic, cycloaliphatic and aromatic diisocyanates affect the phase separation efficiency of soft and hard segments. The best phase separation efficiency was observed for a sample containing aliphatic diisocyanate due to the development of a hydrogen bond network. The thermal history, phase separation and the degree of ordering of the polyurethane determine the polymorphic behavior of melt-crystallized PBA. The formation of a partially-ordered mesophase of linear aliphatic polyurethane leads to an increase in the crystallization rate of PBA at room temperature and the formation of thermodynamically stable α-crystals. The presence of bulk cycloaliphatic and aromatic diol-urethane fragments prevents the phase separation of PBA, which crystallizes after slow cooling in a mixture of α- and ß-crystalline forms. The new nanocalorimetry technique allows the identification of a direct correlation between the phase separation and crystallization kinetics of the melt-crystallized PBA in a wide range of cooling rates - from 2 to 30 000 K s-1. Particularly, ultra-fast cooling suppresses the nucleation of the ß-phase of PBA resulting in slow crystallization of only α-modification at room temperature. The role of the polyurethane mesophase in the crystallization of the soft segment was discussed for the first time.
ABSTRACT
The structural evolution of multiblock thermoplastic polyurethane ureas based on two polydiols, poly(1,4-butylene adipate (PBA) and poly-ε-caprolactone (PCL), as soft blocks and two diisocyanites, 2,4-toluylene diisocyanate (TDI) and 1,6-hexamethylene diisocyanate (HMDI), as hard blocks is monitored during in situ deformation by small- and wide-angle X-ray scattering. It was shown that the urethane environment determines the crystal structure of the soft block. Consequently, two populations of crystalline domains of polydiols are formed. Aromatic TDI forms rigid domains and imposes constrains on the crystallization of bounded polydiol. During stretching, the TDI-polydiol domains reveal limited elastic deformation without reorganization of the crystalline phase. The constrained lamellae of polydiol form an additional physical network that contributes to the elastic modulus and strength of the material. In contrast, polydiols connected to the linear semi-flexible HMDI have a higher crystallization rate and exhibit a more regular lamellar morphology. During deformation, the HMDI-PBA domains show a typical thermoplastic behavior with plastic flow and necking because of the high degree of crystallinity of PBA at room temperature. Materials with HMDI-PCL bonding exhibit elastic deformation due to the low degree of crystallinity of the PCL block in the isotropic state. At higher strain, hardening of the material is observed due to the stress-induced crystallization of PCL.
