Atmospheric pressure, nonthermal plasma inactivation of MS2 bacteriophage: effect of oxygen concentration on virucidal activity.

AIMS: The main aim of this study was to determine the virucidal inactivation efficacy of an in-house-designed atmospheric pressure, nonthermal plasma jet operated at varying helium/oxygen feed gas concentrations against MS2 bacteriophage, widely employed as a convenient surrogate for human norovirus. METHODS AND RESULTS: The effect of variation of percentage oxygen concentration in the helium (He) carrier gas was studied and found to positively correlate with MS2 inactivation rate, indicating a role for reactive oxygen species (ROS) in viral inactivation. The inactivation rate constant increased with increasing oxygen concentrations up to 0·75% O2 . 3 log10 (99·9%) reductions in MS2 viability were achieved after 3 min of exposure to the plasma source operated in a helium/oxygen (99·25% : 0·75%) gas mixture, with >7 log10 reduction after 9 min exposure. CONCLUSIONS: Atmospheric pressure, nonthermal plasmas may have utility in the rapid disinfection of virally contaminated surfaces for infection control applications. SIGNIFICANCE AND IMPACT OF STUDY: The atmospheric pressure, nonthermal plasma jet employed in this study exhibits rapid virucidal activity against a norovirus surrogate virus, the MS2 bacteriophage, which is superior to previously published inactivation rates for chemical disinfectants.

Controlled release of a model antibacterial drug from a novel self-lubricating silicone biomaterial.

There is considerable interest in developing medical devices that provide controlled delivery of biologically active agents, for example, to reduce the incidence of device-related infection. Silicone elastomers are one of the commonest biomaterials used in medical device production. However, they have a relatively high coefficient of friction and the resulting lack of lubricity can cause pain and tissue damage on device insertion and removal. Novel silicone cross-linking agents have recently been reported that produce inherently 'self-lubricating' silicone elastomers with very low coefficients of friction. In this study, the model antibacterial drug metronidazole has been incorporated into these self-lubricating silicone elastomers to produce a novel bioactive biomaterial. The in vitro release characteristics of the bioactive component were evaluated as a function of cross-linker composition and drug loading. Although conventional matrix-type release kinetics were observed for metronidazole from the silicone systems, it was also observed that increasing the concentration of the cross-linking agent responsible for the lubricious character (tetra(oleyloxy)silane) relative to that of the standard non-lubricious cross-linking agent (tetrapropoxysilane) produced an increase in the metronidazole flux rate by up to 65% for a specified drug loading. The results highlight the potential for developing lubricious silicone medical devices with enhanced drug release characteristics.

Evaluation of a poly(vinyl pyrollidone)-coated biomaterial for urological use.

The associated problems of bacterial biofilm formation and encrustation that may cause obstruction or blockage of urethral catheters and ureteral stents often hinders the effective use of biomaterials within the urinary tract. In this in vitro study, we have investigated the surface properties of a hydrophilic poly(vinyl pyrollidone) (PVP)-coating applied to polyurethane and determined its suitability for use as a urinary tract biomaterial by comparing its lubricity and ability to resist bacterial adherence and encrustation with that of uncoated polyurethane and silicone. The PVP-coated polyurethane was significantly more hydrophilic and more lubricious than either uncoated polyurethane or silicone. Adherence of a hydrophilic Escherichia coli isolate to PVP-coated polyurethane and uncoated polyurethane was similar but significantly less than adherence to silicone. Adherence of a hydrophobic Enterococcus faecalis isolate to PVP-coated polyurethane and silicone was similar but was significantly less than adherence to uncoated polyurethane. Struvite encrustation was similar on the PVP-coated polyurethane and silicone but significantly less than on uncoated polyurethane. Furthermore, hydroxyapatite encrustation was significantly less on the PVP-coated polyurethane than on either uncoated polyurethane or silicone. The results suggest that the PVP-coating could be useful in preventing complications caused by bacterial biofilm formation and the deposition of encrustation on biomaterials implanted in the urinary tract and, therefore, warrants further evaluation.

Eradication of endotracheal tube biofilm by nebulised gentamicin.

OBJECTIVE: To compare the efficacy of gentamicin, nebulised via the endotracheal tube (ET), with that of parenteral cefotaxime or parenteral cefuroxime in preventing the formation of ET biofilm. SETTING: General intensive care units in two university teaching hospitals. DESIGN: The microbiology of ET biofilm from 36 ICU patients eligible to receive antibiotic prophylaxis was examined. Peak and trough tracheal concentrations of gentamicin, cefotaxime or cefuroxime were measured in each patient group, on the 2nd day of intubation. PATIENTS: Twelve patients received gentamicin (80 mg) nebulised in 4 ml normal saline every 8 h, 12 cefotaxime (1 g, 12 hourly) and 12 cefuroxime (750 mg, 8 hourly). Prophylaxis was continued for the duration of intubation. MEASUREMENTS AND RESULTS: Samples of tracheal secretions were taken on the 2nd day of ventilation for determination of antibiotic concentrations. Following extubation, ETs were examined for the presence of biofilm. Pathogens considered to be common aetiological agents for VAP included Staphylococcus aureus, enterococci, Enterobacteriaceae and pseudomonads. While microbial biofilm was found on all ETs from the cephalosporin group, microbial biofilm of these micro-organisms was found on 7 of the 12 ET tubes from patients receiving cefotaxime [ S. aureus (4), pseudomonads (1), Enterobacteriaceae (1), enterococcus (1)] and 8 of the 12 ET tubes from patients receiving cefuroxime [Enterobacteriaceae (6), P. aeruginosa (1) and enterococcus (1)]. While microbial biofilm was observed on five ETs from patients receiving nebulised gentamicin, none of these were from pathogens for ventilator-associated pneumonia (VAP). Tracheal concentrations of both cephalosporins were lower than those needed to inhibit the growth of pathogens recovered from ET tube biofilm. The median (and range) concentrations for cefotaxime were 0.90 (<0.23-1.31) mg/l and 0.28 (<0.23-0.58) mg/l for 2 h post-dose and trough samples, respectively. Two hours post-dose concentrations of cefuroxime (median and range) were 0.40 (0.34-0.83) mg/l, with trough concentrations of 0.35 (<0.22-0.47) mg/l. Tracheal concentrations (median and range) of gentamicin measured 1 h post-nebulisation were 790 (352-->1250) mg/l and then, before the next dose, were 436 (250-1000) mg/l. CONCLUSION: Nebulised gentamicin attained high concentrations in the ET lumen and was more effective in preventing the formation of biofilm than either parenterally administered cephalosporin and therefore may be effective in preventing this complication of mechanical ventilation.

The concomitant development of poly(vinyl chloride)-related biofilm and antimicrobial resistance in relation to ventilator-associated pneumonia.

Ventilator-associated pneumonia is a major cause of death in intensive care patients and the endotracheal tube, commonly fabricated from poly(vinyl chloride) (PVC), is acknowledged as a significant factor in this. Bacteria colonise the biomaterial, thereby adopting a sessile mode of growth that progresses to the establishment of an antibiotic-resistant biofilm by the accretion of a protective glycocalyx. This study examined the sequential steps involved in the formation of biofilm on PVC by atomic force microscopy and the concomitant development of resistance to an antibiotic (ceftazidime) and to a non-antibiotic antimicrobial agent (hexetidine). Staphylococcus aureus and Pseudomonas aeruginosa isolated from ET tube biofilm were employed. The surface microrugosity of bacteria growing in sessile mode on PVC decreased significantly (p < 0.05) over the period 4, 24, 48 h and 5 d. The progressive accretion of bacterial glycocalyx was readily visualised in micrographs leading to a smoother surface topography with time. The minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC) for ceftazidime and hexetidine against planktonic (suspension) S. aureus were lower than for Ps. aeruginosa. Furthermore, sessile populations of S. aureus and Ps. aeruginosa on PVC exhibited greater resistance to both ceftazidime and hexetidine when compared to planktonic bacterial growth. The efficacy of the agents, determined by kill kinetics, against sessile bacteria was dependent on age, with established biofilms (> or = 24 h) significantly more resistant (p < 0.05) than early sessile populations (< or = 4 h). Importantly, for practice, even newly colonised bacteria (1 h) were significantly more resistant to antibiotic than planktonic bacteria. Hexetidine was significantly more active (p < 0.05) than ceftazidime on biofilms of both isolates, irrespective of age, with total kill within 24 h treatment. Hexetidine may offer promise in the resolution of infection associated with PVC endotracheal tubes.

Conditioning film and environmental effects on the adherence of Candida spp. to silicone and poly(vinylchloride) biomaterials.

The reported incidence of colonization of oropharyngeal medical devices with Candida spp. has increased in recent years, although few studies that have systematically examined the adherence of yeast cells to such biomaterials, the primary step in the process of colonization. This study, therefore, examined the effects of oropharyngeal atmospheric conditions (5% v/v carbon dioxide) and the presence of a salivary conditioning film on both the surface properties and adherence of Candida albicans, Candida krusei and Candida tropicalis to PVC and silicone. Furthermore, the effects of the salivary conditioning film on the surface properties of these biomaterials are reported. Growth of the three Candida spp. in an atmosphere containing 5% v/v CO2 significantly increased their cell surface hydrophobicity and reduced the zeta potential of C. albicans and C. krusei yet increased the zeta potential of C. tropicalis (p<0.05). Furthermore, growth in 5% v/v CO2 decreased the adherence of C. tropicalis and C. albicans to both PVC and silicone, however, increased adherence of C. krusei (p<0.05). Pre-treatment of the microorganisms with pooled human saliva significantly decreased their cell surface hydrophobicity and increased their adherence to either biomaterial in comparison to yeast cells that had been pre-treated with PBS (p<0.05). Saliva treatment of the microorganisms had no consistent effect on microbial zeta potential. Interestingly, adherence of the three, saliva-treated Candida spp. to saliva-treated silicone and PVC was significantly lower than whenever the microorganisms and biomaterials had been treated with PBS (p<0.05). Treatment of silicone and PVC with saliva significantly altered the surface properties, notably reducing both the advancing and receding contact angles and, additionally, the microrugosity. These effects may contribute to the decreased adherence of saliva-treated microorganisms to these biomaterials. In conclusion, this study has demonstrated the effects of physiological conditions within the oral cavity on the adherence of selected Candida spp. to biomaterials employed as oropharyngeal medical devices. In particular, this study has ominously shown that these materials act as substrates for yeast colonization, highlighting the need for advancements in biomaterial design. Furthermore, it is important that physiological conditions should be employed whenever biocompatibility of oropharyngeal biomaterials is under investigation.

Design of a simulated urethra model for the quantitative assessment of urinary catheter lubricity.

Catheters designed for intermittent urological catheterization should possess appropriate lubricity and mechanical properties to ensure optimal clinical performance. However, the lack of a reproducible in vitro method that simulates clinical use makes it difficult to evaluate the lubricity of urinary catheters and other devices for urethral insertion. Therefore, this study describes a suitable method based on use of a Texture Analyzer to characterize the lubricity of such devices. The novel method was susequently applied to the evaluation of commercially-available intermittent urinary catheters. In addition, other important physicochemical properties of these catheters were examined, namely Young's modulus, degree of hydration and morphology. Catheter lubricity was quantified, using a Texture Analyzer, by measurement of the forces required for insertion and removal of the device from two model substrates, agar and mucin-coated silicone tubing. Significant differences in lubricity were identified between the commercially-available catheters, with Aquacath and Lofric exhibiting the lowest forces of insertion and removal. There were no significant differences between the extent of hydration between the catheters, with the exception of Uro-flo which exhibited the lowest hydration. Therefore, the differences in lubricity were not directly related to the extent of hydration. The forces required for insertion/removal of all catheters were markedly greater in the simulated mucin model than in the agar substrate and the former, simulated urethra model, was accepted to mimic more accurately, the in vivo situation. Significant differences were observed between the Young's Moduli of the catheter biomaterials, with Aquacath possessing the largest value. In conclusion, this study has described the use of a texture analyzer and polymeric substrates for the evaluation of biomaterial lubricity. Using these methods, Aquacath and Lofric catheters exhibited greatest lubricity. However, following additional consideration of the mechanical properties of these biomaterials, Aquacath possessed the most appropriate physicochemical properties for use in intermittent catheterization.

Performance of serologic tests used to detect heartworm infection in cats.

OBJECTIVE: To compare heartworm serum antibody (Ab) and antigen (Ag) test results, using commercial laboratories and in-house heartworm test kits, with necropsy findings in a population of shelter cats. DESIGN: Prospective study. ANIMALS: 330 cats at an animal shelter. PROCEDURE: Between March and June 1998, 30 ml of blood was collected from the cranial and caudal venae cavae of 330 cats that were euthanatized at a local animal shelter. Results of heartworm Ab and Ag serologic tests for heartworm infection were compared with necropsy findings in this population of cats, using commercial laboratories and in-house test kits to measure serum Ab and Ag concentrations. RESULTS: On necropsy, adult Dirofilaria immitis were found in 19 of 330 (5.8%) cats. Combining results from serum Ab and Ag tests achieved higher sensitivities than using serum Ab and Ag test results alone (i.e., maximum sensitivities of 100% vs 89.5%, respectively, whereas use of serum Ag and Ab test results alone achieved higher specificities compared with the use of a combination of serum Ab and Ag results (i.e., maximum specificities of 99.4% vs 92.9%, respectively). CONCLUSIONS AND CLINICAL RELEVANCE: On the basis of our findings, if a cat has clinical signs that suggest heartworm disease despite a negative heartworm serum Ab test result, an alternative heartworm Ab test, a heartworm Ag test, thoracic radiography, or two-dimensional echocardiography should be performed.

Determination of the salivary retention of hexetidine in-vivo by high-performance liquid chromatography.

The non-antibiotic antimicrobial agent hexetidine is widely used at a concentration of 0.1% w/v as an oral rinse to reduce the number of viable microorganisms within the oral cavity. However, following use, the available concentration of hexetidine in the oral cavity declines with time, thus compromising the resultant antimicrobial activity. It is, therefore, desirable to determine the persistence of the agent in the oral cavity by quantification of the drug concentration in saliva, thus enabling prediction of its antimicrobial activity in the oral environment. A rapid reverse-phase HPLC method was therefore developed and validated for hexetidine in aqueous solution (Oraldene) and in saliva samples collected from volunteers post-rinsing with 15 mL of hexetidine oral rinse for 30s. The HPLC assay was sufficiently sensitive to accurately detect hexetidine in saliva up to 25 min after in-vivo use of a commercial oral rinse. Furthermore, it was possible to detect hexetidine below the published minimum inhibitory concentrations (MICs) for a selection of microorganisms. From these data a first-order elimination rate constant of hexetidine from the oral cavity was determined post-rinsing in each of six volunteers. The validated HPLC assay method presented is useful for the assay of hexetidine in the oral cavity both at and below MICs. The first-order elimination rate constant shows significant variation between volunteers.

Implications of endotracheal tube biofilm for ventilator-associated pneumonia.

OBJECTIVE: To determine the relationship between, and antibiotic resistance of, endotracheal tube (ET) biofilm and pulmonary pathogens in ventilator-associated pneumonia (VAP). SETTING: General intensive care units in two university teaching hospitals. DESIGN: The microbiology of ET biofilm and tracheal samples from patients with and without VAP were compared. For individual patients, matching pairs of pathogens were confirmed as identical and characterised for antibiotic susceptibility. PATIENTS: 40 intensive care unit patients - 20 with VAP, 20 without VAP as control. The duration of intubation (median and range) was 6.5 days (3-17) and 5 days (2-10), respectively. MEASUREMENTS AND RESULTS: Samples of tracheal secretions were taken during ventilation for bacteriological culture. Following extubation, ETs were examined for the presence of biofilm. Isolates of high pathogenic potential included Staphylococcus aureus, enterococci, Enterobacteriaceae, pseudomonads and Candida spp. Where the same microorganism was found on tracheal and ET samples by phenotyping, these were confirmed as identical by genotyping and characterised for antibiotic susceptibility in both the free floating and biofilm forms. Seventy per cent of patients with VAP had identical pathogens isolated from both ET biofilm and tracheal secretions. No pairing of pathogens was observed in control patients (p < 0.005). Susceptibility data for these pairs show that the ET acts as a reservoir for infecting microorganisms which exhibit significantly greater antibiotic resistance than their tracheal counterparts. CONCLUSION: This investigation provides further evidence for the role of ET biofilm in VAP. The difficulty in eradicating an established microbial biofilm using antibiotics implies that increased attention must be directed towards modification of the ET to prevent or substantially reduce biofilm formation.

Detection of prosthetic hip infection at revision arthroplasty by immunofluorescence microscopy and PCR amplification of the bacterial 16S rRNA gene.

In this study the detection rates of bacterial infection of hip prostheses by culture and nonculture methods were compared for 120 patients with total hip revision surgery. By use of strict anaerobic bacteriological practice during the processing of samples and without enrichment, the incidence of infection by culture of material dislodged from retrieved prostheses after ultrasonication (sonicate) was 22%. Bacteria were observed by immunofluorescence microscopy in 63% of sonicate samples with a monoclonal antibody specific for Propionibacterium acnes and polyclonal antiserum specific for Staphylococcus spp. The bacteria were present either as single cells or in aggregates of up to 300 bacterial cells. These aggregates were not observed without sonication to dislodge the biofilm. Bacteria were observed in all of the culture-positive samples, and in some cases in which only one type of bacterium was identified by culture, both coccoid and coryneform bacteria were observed by immunofluorescence microscopy. Bacteria from skin-flake contamination were readily distinguishable from infecting bacteria by immunofluorescence microscopy. Examination of skin scrapings did not reveal large aggregates of bacteria but did reveal skin cells. These were not observed in the sonicates. Bacterial DNA was detected in 72% of sonicate samples by PCR amplification of a region of the bacterial 16S rRNA gene with universal primers. All of the culture-positive samples were also positive for bacterial DNA. Evidence of high-level infiltration either of neutrophils or of lymphocytes or macrophages into associated tissue was observed in 73% of patients. Our results indicate that the incidence of prosthetic joint infection is grossly underestimated by current culture detection methods. It is therefore imperative that current clinical practice with regard to the detection and subsequent treatment of prosthetic joint infection be reassessed in the light of these results.

Antimicrobial susceptibility of bacteria isolated from orthopedic implants following revision hip surgery.

The susceptibilities of 49 isolates recovered from orthopedic implants to seven antimicrobial agents were evaluated by the broth microdilution method. Ciprofloxacin and vancomycin were more active than gentamicin, representing aminoglycosides which are routinely incorporated into bone cement, and also more active than the peroperative antimicrobial agents cefamandole and erythromycin. The use of ciprofloxacin and vancomycin in vivo, therefore, warrants further evaluation.

Improved detection of infection in hip replacements. A currently underestimated problem.

Our aim was to determine if the detection rate of infection of total hip replacements could be improved by examining the removed prostheses. Immediate transfer of prostheses to an anaerobic atmosphere, followed by mild ultrasonication to dislodge adherent bacteria, resulted in the culture of quantifiable numbers of bacteria, from 26 of the 120 implants examined. The same bacterial species were cultured by routine microbiological techniques from only five corresponding tissue samples. Tissue removed from 18 of the culture-positive implants was suitable for quantitative tissue pathology and inflammatory cells were present in all samples. Furthermore, inflammatory cells were present in 87% of tissue samples taken from patients whose implants were culture-negative. This suggests that these implants may have been infected by bacteria which were not isolated by the techniques of culture used. The increased detection of bacteria from prostheses by culture has improved postoperative antibiotic therapy and should reduce the need for further revision.

Characterization and assessment of a novel poly(ethylene oxide)/polyurethane composite hydrogel (Aquavene) as a ureteral stent biomaterial.

The effective long-term use of indwelling ureteral stents is often hindered by the formation of encrusting deposits which may cause obstruction and blockage of the stent. Development of improved ureteral stent biomaterials capable of preventing or reducing encrustation is therefore particularly desirable. In this study, the suitability as a ureteral stent biomaterial of Aquavene, a novel poly(ethylene oxide)/polyurethane composite hydrogel was compared with that of silicone and polyurethane, two materials widely employed in ureteral stent manufacture. Examination of Aquavene in dry and hydrated states by confocal laser scanning microscopy, scanning electron microscopy, and atomic force microscopy showed the presence of numerous channels within a cellular matrix structure. The channel size increased considerably to as much as 10 microm in diameter in the hydrated state. Aquavene provided superior resistance to encrustation and intraluminal blockage over a 24-week period in a simulated urine flow model. Unobstructed urine flow continued with Aquavene at 24 weeks, whereas silicone and polyurethane stents became blocked with encrustation at 8 and 10 weeks, respectively. Weight loss within Aquavene on the order of 9% (w/w) over the 24-week flow period indicates that extraction of the noncrosslinked poly(ethylene oxide) hydrogel may be responsible for the prevention of encrustation blockage of this biomaterial. In the dry state, Aquavene was significantly harder than either silicone or polyurethane, as shown by Young's modulus, and rapidly became soft on hydration. These additional properties of Aquavene would facilitate ease of stent insertion in the dry state past obstructions in the ureter and provide improved patient comfort on subsequent biomaterial hydration in situ. Aquavene is a promising candidate for use in the urinary tract, as it is probable that effective long-term urine drainage would be maintained in vivo. Further evaluation of this novel biomaterial is therefore warranted.

Assessment of encrustation behaviour on urinary tract biomaterials.

The effective clinical use of biomaterials within the urinary tract is often hindered by the associated problems of bacterial biofilm formation and encrustation which may cause obstruction or blockage of urethral catheters and ureteral stents. Methods for assessing encrustation formation on these devices are reviewed and novel urinary tract biomaterials which may be more effective at resisting encrustation are discussed.

Mechanical performance of polyurethane ureteral stents in vitro and ex vivo.

A serious problem associated with the use of ureteral stents is fracture in situ. Following clinical observations of fracture of polyurethane stents in vivo, this study examined the mechanical properties of 17 polyurethane stents (double-J containing drainage holes) retrieved from patients over a 24-week period of insertion. In addition, stents were immersed in human and artificial urine in an in vitro model at 37 degrees C to determine their general propensity to fracture. Mechanical properties of ureteral stents were examined using the standard ASTM D-412 tensile test and by the novel application of dynamic mechanical analysis (DMA). The ultimate tensile strength and elongation at break (but not the Young's modulus) of unused polyurethane stent sections containing side-drainage holes were greater than stent sections devoid of side-drainage holes. No correlations were observed between increased or decreased Young's modulus, ultimate tensile strength or elongation at break of polyurethane stents and their time of immersion in either human urine or artificial urine in simulated upper urinary tract conditions of 37 degrees C and 5% CO2. Similarly, no correlations were observed between Young's modulus, ultimate tensile strength or elongation of polyurethane stents and stent dwell time in situ. DMA of retrieved stents revealed that their tan delta value and storage modulus did not differ significantly from unused stents following dwell times in situ of up to 24 weeks. No changes in the glass transition temperatures were observed in retrieved stents. Although patient variation was observed, the results indicate that the polyurethane stents examined in vitro and following removal from patients did not exhibit any greater propensity to fracture than their unused counterparts. Fracture of retrieved polyurethane stents, arising in vivo and also during subsequent tensile testing, was observed to occur along the drainage holes, suggesting that elimination of these holes will reduce the incidence of polyurethane ureteral stent fracture in use.

Assessment of urinary tract biomaterial encrustation using a modified Robbins device continuous flow model.

Encrustation of biomaterials employed in the urinary tract remains a major problem resulting in obstruction or blockage of catheters and stents. Therefore, resistance to encrustation is a desirable feature of biomaterials employed in such devices. The novel assessment of biomaterial encrustation employing a continuous flow model based on a modified Robbins device is described. Artificial urine was used in conjunction with 5% CO2 to simulate the physiological environment within the upper urinary tract. The widely used urinary device biomaterials, silicone and polyurethane, were investigated in the model for hydroxyapatite and struvite encrustation. Scanning electron microscopy, energy dispersive X-ray analysis, and atomic absorption spectroscopy all showed that silicone was less prone to encrustation than polyurethane and that hydroxyapatite deposition was predominant on both surfaces. The model has the advantage that a large number of biomaterials may be investigated simultaneously because several Robbins devices may be placed in parallel. The model is recommended for comparative evaluation of biomaterial candidates for use in urinary tract devices.