Improved DET communication between cellobiose dehydrogenase and a gold electrode modified with a rigid self-assembled monolayer and green metal nanoparticles: The role of an ordered nanostructuration.

Efficient direct electron transfer (DET) between cellobiose dehydrogenase from Corynascus thermophilus (CtCDH) and a novel gold electrode platform, obtained by covalent linking of green AuNPs and AgNPs modified with a dithiol self-assembled monolayer, consisting of biphenyl-4,4'-dithiol (BPDT), was presented. The green AuNPs and AgNPs were synthesized using quercetin as reducing agent at room temperature. TEM experiments showed that the AuNPs and AgNPs were circular in shape with an average diameter of 5 and 8nm, respectively. Cyclic voltammetry of CtCDH immobilized onto the AuNPs/BPDT/AuE and the AgNPs/BPDT/AuE electrode platforms were carried out and compared with naked AuE, BPDT/AuE, AuNPs/AuE, and AgNPs/AuE. A pair of well-defined redox waves in neutral pH solution due to efficient DET of CtCDH was present with both MNPs/BPDT/AuE platforms. No DET communication was found with platforms without MNPs linked to BPDT. The apparent heterogeneous electron transfer rate constants (kS) of CtCDH were calculated to be 21.5±0.8s-1 and 10.3±0.7s-1, for the AuNPs/BPDT/AuE and the AgNPs/BPDT/AuE platforms, respectively. The modified electrodes were successively used to develop an eco-friendly biosensor for lactose detection. The CtCDH/AuNPs/BPDT/AuE based biosensor showed the best analytical performances with an excellent stability, a detection limit of 3µM, a linear range between 5 and 400µM and a sensitivity of 27.5±2.5µAcm-2mM-1. Such performances were favorably compared with other lactose biosensors reported in literature. The biosensor was successively tested to quantify lactose content in real milk and cream samples. No significant interference present in the sample matrices was observed.

Reverse foam sclerotherapy of the great saphenous vein with sapheno-femoral ligation compared to standard and invagination stripping: a prospective clinical series.

OBJECTIVES: Comparison of Reverse Foam Sclerotherapy of the great saphenous vein (GSV) combed with sapheno-femoral junction (SFJ) ligation to standard (Babcock) stripping and invagination (Pin) stripping in a prospective clinical series. DESIGN: Prospective clinical series. MATERIALS AND METHODS: 90 consecutive limbs of 82 patients with incompetence of the GSV resulting in varicose veins were prospectively randomised into 3 groups of 30, treated by SFJ ligation and either reverse foam sclerotherapy, standard stripping or invagination stripping of the GSV. Outcomes were assessed post-operatively and at 2-weeks follow-up. Peri-operative blood loss (24 hrs), analgesic requirement, bruising and residual varicosities were assessed. Bruising was assessed by both patients and independent assessors using questionnaires. RESULTS: SFJ ligation plus reverse foam sclerotherapy of the GSV was associated with significantly less blood loss, bruising and post-op discomfort than either of the stripping techniques. (p<0.001, Mann-Whitney) CONCLUSION: Standard stripping of the GSV and invagination stripping are not associated with major discomfort and problems in the early post-operative period. SFJ ligation and GSV reverse foam sclerotherapy yielded greater patient satisfaction with less post-op bruising and discomfort and reduced analgesic requirements.

Studies of the separation and characterisation of mixtures of starch and cellulose derivatives by use of chromatography and mass spectrometry.

In this work a method was developed for characterisation of commercially available polymers consisting of mixtures of substituted cellulose and starch. Selective hydrolysis with specific enzymes was used to achieve separation of the two polymers in the mixture. Enzymes hydrolysing (1-->4)-alpha-D and (1-->6)-alpha-D-glycosidic bonds were used for the starch part and enzymes hydrolysing (1-->4)-beta-D-glycosidic bonds for the cellulose part. The hydrolysed fraction was separated from the unhydrolysed fraction and characterised by use of size-exclusion chromatography (SEC), to confirm that enzyme hydrolysis of the different polymers had occurred. High-performance anion-exchange chromatography (HPAEC) was performed to determine the amount of unmodified glucose units (UGU) in the fractions. Electrospray ionisation mass spectrometry (ESIMS) was used for determination of the substituents. All products were converted to monomers by acid hydrolysis to simplify mass spectral identification of the substituents. The monomers were further subjected to acetylation with acetic acid anhydride to facilitate identification of the substituents. By combining the results from the different analytical techniques a picture of the samples was obtained.

Electroenzymatic reactions with oxygen on laccase-modified electrodes in anhydrous (pure) organic solvent.

The electroenzymatic reactions of Trametes hirsuta laccase in the pure organic solvent dimethyl sulfoxide (DMSO) have been investigated within the framework for potential use as a catalytic reaction scheme for oxygen reduction. The bioelectrochemical characteristics of laccase were investigated in two different ways: (i) by studying the electroreduction of oxygen in anhydrous DMSO via a direct electron transfer mechanism without proton donors and (ii) by doing the same experiments in the presence of laccase substrates, which display in pure organic solvents both the properties of electron donors as well as the properties of weak acids. The results obtained with laccase in anhydrous DMSO were compared with those obtained previously in aqueous buffer. It was shown that in the absence of proton donors under oxygenated conditions, formation of superoxide anion radicals is prevented at bare glassy carbon and graphite electrodes with adsorbed laccase. The influence of the time for drying the laccase solution at the electrode surface on the electroreduction of oxygen was studied. Investigating the electroenzymatic oxidation reaction of catechol and hydroquinone in DMSO reveals the formation of various intermediates of the substrates with different electrochemical activity under oxygenated conditions. The influence of the content of aqueous buffer in the organic solvent on the electrochemical behaviour of hydroquinone/1,4-benzoquinone couple was also studied.

Prussian blue modified glassy carbon electrodes-study on operational stability and its application as a sucrose biosensor.

Stabilisation of electrochemically deposited Prussian blue (PB) films on glassy carbon (GC) electrodes has been investigated and an enhancement in the stability of the PB films is reported if the electrodes are treated with tetrabutylammonium toluene-4-sulfonate (TTS) in the electrochemical activation step following the electrodeposition. A multi-enzyme PB based biosensor for sucrose detection was made in order to demonstrate that PB films can be coupled with an oxidase system. A tri-enzyme system, comprising glucose oxidase, mutarotase and invertase, was crosslinked with glutaraldehyde and bovine albumin serum on the PB modified glassy carbon electrode. The deposited PB operated as an electrocatalyst for electrochemical reduction of hydrogen peroxide, the final product of the enzyme reaction sequence. The electrochemical response was studied using flow injection analysis for the determination of sucrose, glucose and H(2)O(2). The optimal concentrations of the immobilisation mixture was standardised as 8U of glucose oxidase, 8U of mutarotase, 16U of invertase, 0.5% glutaraldehyde (0.025mul) and 0.5% BSA (0.025mg) in a final volume of 5mul applied at the electrode surface (0.066cm(2)). The biosensor exhibited a linear response for sucrose (4-800muM), glucose (2-800muM) and H(2)O(2) (1-800muM) and the detection limit was 4.5, 1.5 and 0.5muM for sucrose, glucose and H(2)O(2), respectively. The sample throughput was ca. 60 samples h(-1). An increase in the operational and storage stability of the sucrose biosensor was also noted when the PB modified electrodes were conditioned in phosphate buffer containing 0.05M TTS during the preparation of the PB films.

Investigation of electrochemical properties of FMN and FAD adsorbed on titanium electrode.

The electrochemical properties (such as the values of the formal potentials, the dependence of the formal potentials on solution pH, the reversibility of the electrochemical process) of flavin mononucleotide (FMN) and flavin adenine dinucleotide (FAD) adsorbed on a titanium electrode were dependent on the electrolyte. The formal potentials of adsorbed FMN and FAD in phosphate, HEPES and PIPES buffers at pH 7 were similar to those for dissolved flavins (-460 to -480 mV vs. SCE) and changed linearly with a slope of about 52 mV per pH unit in the pH region 3 to 8. In TRIS buffer, the formal potentials of adsorbed FMN and FAD were also pH-dependent, however, with invariance in the pH range 4.5 to 5.5. In non-buffered solutions (KCl, LiCl, NaCl, CsCl, CaCl(2), Na(2)SO(4) at different concentrations), the electrochemical behavior of adsorbed FMN and FAD differed from that of dissolved flavins and was dependent on the electrolyte (especially at pH 4.5 and pH 5). Under certain conditions (electrolyte, concentration, pH), a two-step oxidation of FMN could be observed.

Mediator-modified electrodes for catalytic NADH oxidation: high rate constants at interesting overpotentials.

Carbon paste electrodes were modified with a nitrofluorenone derivative, 2,4,7-trinitro-9-fluorenone, adsorbed on zirconium phosphate (ZP). After electrochemical reduction of the fluorenone derivative, it turns into a very efficient mediator for electrocatalytic NADH oxidation, with a formal potential of about +250 mV vs. Ag/AgCl. The electrochemistry and the electrocatalytic properties of the mediator were investigated with cyclic voltammetry and rotating disk electrode methodology. The second order rate constant with NADH was evaluated and found to be higher than 10(6) M(-1) s(-1), thus approaching true diffusion controlled currents for NADH oxidation.

Liquid chromatographic determination of total and beta-N-oxalyl-L-alpha,beta-diaminopropionic acid in lathyrus sativus seeds using both refractive index and bioelectrochemical detection.

A further improved chromatographic method for the simultaneous determination of the total amount of ODAP, selectively the amount of its neurotoxic form, beta-ODAP, and free L-glutamate in raw Lathyrus sativus (grass pea) seed samples is described using post-column refractive index in combination with bioelectrochemical detection. The biosensor is based on crosslinking horseradish peroxidase (HRP) and an Os-containing mediating polymer with poly(ethyleneglycol)(400) diglycidyl ether (PEGDGE), forming an inner hydrogel layer and then immobilising L-glutamate oxidase (GlOx) as an outer layer on top of a graphite electrode. Addition of polyethylenimine (PEI) to the hydrogel is believed to have sensitivity and stability enhancing effect on the biosensor. The double-layer approach in the biosensor construction avoided direct electrical wiring of GlOx and resulted in a higher sensitivity of 4.6 mA/M cm2 with respect to beta-ODAP and a wider linear range (1-250 microM) for both L-glutamate and beta-ODAP when compared with a single-layer approach where GlOx, HRP, and Os-polymer are crosslinked together. The limit of detection for the chromatographic-biosensor system was found to be 2 microM with respect to beta-ODAP and 0.7 microM with respect to L-glutamate. The refractive index detection on-line with the biosensor enabled full control of the chromatographic system for the determination of the total amount of ODAP, selectively the amount of beta-ODAP and L-glutamate. Ten grass pea samples have been collected from Lathyrism prone areas of Ethiopia to test the applicability of the presently developed analytical system for real sample analysis. The toxin levels of grass pea collections were determined in an aqueous extracts and ranged from 0.52 to 0.76%, dry mass basis. Comparison of results of an established spectrophotometric assay and that of the present system has shown an extraordinary degree of agreement as revealed by parallel "t" test (90% confidence limit). The present system has operational stability of more than 50 h. Analysis time per sample is 10 min after extraction for 90 min.

High-performance anion-exchange chromatography-electrospray mass spectrometry for investigation of the substituent distribution in hydroxypropylated potato amylopectin starch.

The use of high-performance anion-exchange chromatography (HPAEC) with pulsed amperometric detection (PAD) coupled on-line with electrospray mass spectrometry (ESI-MS) for analysis of the substitution pattern in chemically modified starch, has been investigated. In order to characterise the distribution of substitution groups along the polymer chain, hydroxypropylated potato amylopectin starch (HPPAP) was subjected to enzymic hydrolysis, followed by analysis of the degradation products by HPAEC-PAD-MS. When using conventional chromatographic techniques for characterisation of enzymic hydrolysates, standard compounds are required for identification of the hydrolysis products. However, the on-line coupling with ESI-MS allowed identification of all products obtained, substituted as well as unsubstituted, and also of those compounds that co-eluted, without the need for standards. Further, HPAEC-PAD-MS was shown to be useful for analysis of the substitution pattern in modified starch; from results obtained it was suggested that the hydroxypropyl groups were homogeneously distributed in the amylopectin molecule. It was also shown that the starch hydrolysing enzymes were hindered by the hydroxypropyl groups and preferentially cleaved glucosidic linkages between unsubstituted glucose units.

Mediatorless biosensor for H(2)O(2) based on recombinant forms of horseradish peroxidase directly adsorbed on polycrystalline gold.

Four forms of horseradish peroxidase (HRP) have been used to prepare peroxidase-modified gold electrodes for mediatorless detection of peroxide: native HRP, wild type recombinant HRP, and two recombinant forms containing six-His tag at the C-terminus and at the N-terminus, respectively. The adsorption of the enzyme molecules on gold was studied by direct mass measurements with electrochemical quartz crystal microbalance. All the forms of HRP formed a monolayer coverage of the enzyme on the gold surface. However, only gold electrodes with adsorbed recombinant HRP forms exhibited high and stable current response to H(2)O(2) due to its bioelectrocatalytic reduction based on direct electron transfer between gold and HRP. The sensitivity of the gold electrodes modified with recombinant HRPs was in the range of 1.4-1.5 A M(-1) cm(-2) at -50 mV versus Agmid R:AgCl. The response to H(2)O(2) in the concentration range 0.1-40 microM was not dependent on the presence of a mediator (i.e. catechol) giving strong evidence that the electrode currents are diffusion limited. Lower detection limit for H(2)O(2) detection was 10 nM at the electrodes modified with recombinant HRPs.

Evaluation of glucose biosensors based on Prussian Blue and lyophilised, crystalline and cross-linked glucose oxidases (CLEC(R)).

Glucose biosensors based on lyophilised, crystalline and cross-linked glucose oxidase (GOx, CLEC(R)) and commercially available lyophilised GOx immobilised on top of glassy carbon electrodes modified with electrodeposited Prussian Blue are critically compared. Two procedures were carried out for preparing the biosensors: (1) deposition of one layer of adsorbed GOx dissolved in an aqueous solution followed by deposition of two layers of low molecular weight Nafion(R) dissolved in 90% ethanol, and (2) deposition of two layers of a mixture of GOx with Nafion dissolved in 90% ethanol. The performance of the biosensors was evaluated in terms of linear response range for hydrogen peroxide and glucose, detection limit, and susceptibility to some common interfering species (ascorbic acid, acetaminophen and uric acid). The operational stability of the biosensors was evaluated by applying a steady potential of -50 mV versus Ag/AgCl to the glucose biosensor and injecting standard solutions of hydrogen peroxide and glucose (50 muM and 1.0 mM, respectively, in phosphate buffer) for at least 5 h in a flow-injection system. Scanning electron microscopy was used for visualisation of the Prussian Blue redox catalyst and in the presence of the different GOx preparations on the electrode surface.

Effect of interfering substances on current response of recombinant peroxidase and glucose oxidase-recombinant peroxidase modified graphite electrodes.

Graphite electrodes have been modified with different forms of horseradish peroxidase (HRP). These included native HRP, wild-type recombinant HRP, and two single-point recombinant HRP mutants, N70V and N70D. The mediator-less response of these electrodes to H2O2 was studied indicating that electrodes modified with recombinant HRP forms are more stable than those modified with native HRP. Various interfering compounds were investigated for their effect on the current response to H2O2. It was found that interferences such as acetaminophen and dopamine affected the response by mediating the electron transfer (ET) between graphite and peroxidases. The mediating behaviour manifested itself as an increased current of the electrode to H2O2. The interfering effect was less pronounced for the electrodes modified with recombinant HRPs possessing better electronic coupling with the graphite surface. The interfering behaviour of acetaminophen on the response for glucose with the bienzyme electrode containing co-immobilised glucose oxidase and HRP was mainly ascribed to mediation of ET between graphite and HRP. It was experimentally proven that a high efficiency of direct ET between graphite and recombinant HRP substantially reduces the interfering effect of acetaminophen.

Characterisation of the substituent distribution in hydroxypropylated potato amylopectin starch.

The distribution of substituents in hydroxypropylated potato amylopectin starch (amylose deficient) modified in a slurry of granular starch (HPPAPg) or in a polymer 'solution' of dissolved starch (HPPAPs), was investigated. The molar substitution (MS) was determined by three different methods: proton nuclear magnetic resonance (1H NMR) spectroscopy, gas-liquid chromatography (GLC) with mass spectrometry, and a colourimetric method. The MS values obtained by 1H NMR spectroscopy were higher than those obtained by GLC-mass spectrometry analysis and colourimetry. The relative ratio of 2-, 3-, and 6-substitution, as well as un-, mono-, and disubstitution in the anhydroglucose unit (AGU) were determined by GLC-mass spectrometry analysis. Results obtained showed no significant difference in molar distribution of hydroxypropyl groups in the AGU between the two derivatives. For analysis of the distribution pattern along the polymer chain, the starch derivatives were hydrolysed by enzymes with different selectivities. Debranching of the polymers indicated that more substituents were located in close vicinity to branching points in HPPAPg than in HPPAPs. Simultaneous alpha-amylase and amyloglucosidase hydrolysis of HPPAPg liberated more unsubstituted glucose units than the hydrolysis of HPPAPs, indicating a more heterogeneous distribution of substituents in HPPAPg.

Electropolymerization of Preadsorbed Layers of Some Azine Redox Dyes on Graphite.

The redox-active azine dyes Nile blue A (NB) and Toluidine blue O (TB) were electropolymerized after preadsorption onto the surface of graphite electrodes by potential cycling, using an anodic scan limit of 0.9 or 1.0 V vs SCE, where irreversible electrooxidation of the dye proceeds, yielding polymerizable species. Electropolymerization of both dyes is followed by the progressive disappearance of the characteristic current peaks in the cyclic voltammograms, and formation of new ones, shifted by ca. 0.21 V to the positive direction. Also, a decrease and gradual disappearance of the characteristic luminescence at a maximum of 671 nm was observed during the electropolymerization of NB. The resulting electrodes, modified by electropolymerized derivatives of NB and TB, were shown to be able to catalyze the electrooxidation of the coenzyme NADH. Thus, the modified electrodes prepared can be used for amperometric detection of the reduced form of the coenzyme. Copyright 2000 Academic Press.

Electrochemical investigation of cellobiose oxidation by cellobiose dehydrogenase in the presence of cytochrome c as mediator.

An important aspect of the cytochrome c electrochemistry is the possibility of coupling the 'heterogeneous reactions' with other redox enzymes. Cellobiose dehydrogenase, a 89170 Da glycoprotein that contains both FAD and a b-type haem as prosthetic groups, donates electrons to a number of acceptors, including cytochrome c. While haem b is surrounded mainly by acidic amino acids, cytochrome c displays positive charged lysine groups around the haem site. Thus a fast reaction between both proteins is explicable. In the presence of cellobiose, a catalytic current was observed, owing to the interaction of cellobiose dehydrogenase with electrostatically adsorbed cytochrome c. Adsorption of cytochrome c provides a technological model surface for vectorial electron transfer.

Anisotropic orientation of horseradish peroxidase by reconstitution on a thiol-modified gold electrode.

Horseradish peroxidase (HRP) was reconstituted on the surface of a gold electrode that was modified first with a hemin-carbon-chain-thiol derivative followed by addition of the apo protein to the contacting solution. To facilitate the reconstitution of the holo enzyme, the hemin needs to be immobilised on a carbon-chain spacer arm. To achieve this, an immobilisation protocol was developed that is based on the initial formation of a mixed self-assembled monolayer on the gold surface consisting of 3-carboxypropyl disulphide and an activated disulphide (3,3'-dithiodipropionic acid di-(N-succinimidyl ester)) followed by binding of a diaminoalkane to the activated disulphide. The hemin was then coupled to the second amino group of the diaminoalkane by means of a carbodiimide coupling reagent. Finally, the enzyme was reconstituted on the hemin-modified surface by immersion of the electrode in a solution containing apo-HRP. The advantage of this method is that the length of the spacer arm can be changed easily, because diaminoalkanes of different chain lengths are available. The electrochemistry of the hemin and the reconstituted HRP electrodes was studied by means of cyclic voltammetry and differential-pulse voltammetry. The catalytic ability for reduction of hydrogen peroxide was investigated for both direct and mediated electrochemistry with a soluble electron donor (ortho-phenylenediamine).

Amperometric biosensor for glutamate using prussian blue-based "artificial peroxidase" as a transducer for hydrogen peroxide.

The specially deposited Prussian Blue denoted as "artificial peroxidase" was used as a transducer for hydrogen peroxide. The electrocatalyst was stable, highly active, and selective to hydrogen peroxide reduction in the presence of oxygen, which allowed sensing of H2O2 around 0.0 V (Ag/AgCl). Glutamate oxidase was immobilized on the surface of the Prussian Blue-modified electrode in a Nafion layer using a nonaqueous enzymology approach. The calibration range for glutamate in flow injection system was 1 x 10(-7)-1 x 10(-4) M. The lowest concentration of glutamate detected (1 x 10(-7) M) and the highest sensitivity in the linear range of 0.21 A M-1 cm-2 were achieved. The influence of reductants was practically avoided using the low potential of an indicator electrode (0.0 V Ag/AgCl). The attractive performance characteristics of the glutamate biosensor illustrate the advantages of Prussian Blue-based "artificial peroxidase" as transducer for hydrogen peroxide detection.

Electrocatalytic Oxidation of Coenzyme NADH at Carbon Paste Electrodes, Modified with Zirconium Phosphate and Some Redox Mediators.

Carbon paste electrodes (CPE), modified with zirconium phosphate (ZrP) along with some redox mediators, were prepared and shown to be active in electrocatalytic oxidation of coenzyme NADH. Nile blue (NB), methylviologen (MV), and benzylviologen (BV) were added to ZrP-containing CPE, showing a shift of their redox potentials toward the positive direction, ranging from ca. 0.20 to 0.35 V. This shift was interpreted in terms of different complexation abilities of oxidized and reduced forms of mediators with the host matrix. The modified electrodes prepared showed electrocatalytic activity for electrooxidation of NADH. The i,c-dependencies for the modified electrodes were shown to follow Michaelis-Menten kinetics. For C:ZrP:NB and C:ZrP:MV electrodes, Michaelis constants of 0.870 +/- 0.012 and 0.153 +/- 0.015 mM, respectively, were obtained. The sensitivity of C:ZrP:NB and C:ZrP:MV electrodes to NADH varied from 19.2 to 60.8 and from 18.4 to 50.9 µA/mM c cm(2), respectively, by changing the working potential from -0.2 to 0.2 V vs. SCE. Copyright 2000 Academic Press.

Direct heterogeneous electron transfer of recombinant horseradish peroxidases on gold.

Clean polycrystalline gold electrodes were modified with native glycosylated horseradish peroxidases (HRP) or two different recombinant (carbohydrate free) HRPs; recombinant wild-type HRP (rec-HRP) and recombinant HRP containing a six histidine-tag at the C-terminus of the polypeptide chain (rec-HRP-His), respectively. Only the electrodes modified with the recombinant HRPs exhibited high current responses to H2O2 due to relatively rapid direct electron transfer (ET) between recombinant HRP and gold. The absence of a carbohydrate shell on rec-HRP and the additionally existing histidine-tag on rec-HRP-His improved the electrode sensitivity to H2O2 by more than 100 times if compared with the response observed at gold modified with native HRP. Rotating disk electrode experiments indicated that the heterogeneous electron transfer rates are equal to 4.7 and 7.5 s-1 for direct electron transfer between the gold electrode and rec-HRP or rec-HRP-His, respectively.

Biosensors based on novel peroxidases with improved properties in direct and mediated electron transfer.

Native horseradish peroxidase (HRP) on graphite has revealed approximately 50% of the active enzyme molecules to be in direct electron transfer (ET) contact with the electrode surface. Some novel plant peroxidases from tobacco, peanut and sweet potato were kinetically characterised on graphite in order to find promising candidates for biosensor applications and to understand the nature of the direct ET in the case of plant peroxidases. From measurements of the mediated and mediatorless currents of hydrogen peroxide reduction at the peroxidase-modified rotating disk electrodes (RDE), it was concluded that the fraction of enzyme molecules in direct ET varies substantially for the different plant peroxidases. It was observed that the anionic peroxidases (from sweet potato and tobacco) demonstrated a higher percentage of molecules in direct ET than the cationic ones (HRP and peanut peroxidase). The peroxidases with a high degree of glycosylation demonstrated a lower percentage of molecules in direct ET. It could, thus, be concluded that glycosylation of the peroxidases hinders direct ET and that a net negative charge on the peroxidase (low pI value) is beneficial for direct ET. Especially noticeable are the values obtained for sweet potato peroxidase (SPP), revealing both a high percentage in direct ET and a high rate constant of direct ET. The peroxidase electrodes were used for determination of hydrogen peroxide in RDE mode (mediatorless). SPP gave the lowest detection limit (40 nM) followed by HRP and peanut peroxidase.