Fluorescent polymer markers photoconvertible with a 532 nm laser for individual cell labeling.

Fluorescent photoconvertible materials and molecules have been successfully exploited as bioimaging markers and cell trackers. Recently, the novel fluorescent photoconvertible polymer markers have been developed that allow the long-term tracking of individual labeled cells. However, it is still necessary to study the functionality of this type of fluorescent labels for various operating conditions, in particular for commonly used discrete wavelength lasers. In this article, the photoconversion of fluorescent polymer labels with both pulsed and continuous-wave lasers with 532 nm-irradiation wavelength, and under different laser power densities were studied. The photoconversion process was described and its possible mechanism was proposed. The peculiarities of fluorescent polymer capsules performance as an aqueous suspension and as a single capsule were described. We performed the successful nondestructivity marker photoconversion inside RAW 264.7 monocyte/macrophage cells under continuous-wave laser with 532 nm-irradiation wavelength, showing prospects of these fluorescent markers for long-term live cell labeling.

A fluorescent immunochromatographic strip test using Quantum Dots for fumonisins detection.

A fluorescent immunochromatographic strip test (ICST) based on the use of Quantum Dots (QD) was developed and applied to detect fumonisins in maize samples. A limit of detection for fumonisin B1 of 2.8 µg L(-1) was achieved, with an analytical working range of 3-350 µg L(-1), corresponding to 30-3500 µg kg(-1) in maize flour samples, according with the extraction procedure. The time required to perform the analysis was 22 min, including sample preparation. Recovery values in the range from 91.4% to 105.4% with coefficients of variation not exceeding 5% were obtained for fortified and naturally contaminated maize flour samples. To evaluate the possible improvements due to the use of QD for ICST technology, we performed a direct comparison of the proposed QD-ICST to a gold nanoparticles- and a chemiluminescent-ICST previously developed for fumonisins detection, in which the same immunoreagents were employed.

Multi-analyte homogenous immunoassay based on quenching of quantum dots by functionalized graphene.

We propose a homogenous multi-analyte immunoassay based on the quenching of quantum dot (QD) fluorescence by means of graphene. Two QDs with emission maxima at 636 and 607 nm were bound to antibodies selective for mouse or chicken immunoglobulins, respectively, and graphene functionalized with carboxylic moieties was employed to covalently link the respective antigen. The antibody-antigen interaction led graphene close enough to QDs to quench the QD fluorescence by resonance energy transfer. The addition of free antigens that competed with those linked to graphene acted as a "turn-on" effect on QD fluorescence. Fluorescence emitted by the two QDs could be recorded simultaneously since the QDs emitted light at different wavelengths while being excited at the same wavelength and proved to be linearly correlated with free antigen concentration. The developed assay allows measuring both antigens over 2-3 orders of magnitude and showed estimated limits of detection in the nanomolar range. This approach is thus a promising universal strategy to develop homogenous immunoassays for diverse antigens (cells, proteins, low-molecular-mass analytes) in a multi-analyte configuration.

Multiplex flow-through immunoassay formats for screening of mycotoxins in a variety of food matrices.

Two multi-analyte flow-through immunoassay formats for rapid detection of mycotoxins in a variety of food matrices (peanut cake, maize, and cassava flour) were developed and evaluated. The selected food matrices are typical staple foods and export products for most low-income communities around the world. The assay formats included gel-based and membrane-based flow-through assays and were based on the principle of indirect enzyme-linked immunosorbent assay. Using the same immunoreagents, the performance characteristics of both assays were compared. To the best of our knowledge, this is the first report on such a comparison. The gel-based format was developed to screen for ochratoxin A, fumonisin B(1), deoxynivalenol, and zearalenone detection at cut-off values of 3, 1,250, 1,000, and 200 µg kg(-1), respectively, while the membrane-based format can be used to screen ochratoxin A, aflatoxin B(1,) deoxynivalenol, and zearalenone at the following cut-offs: 3, 5, 700, and 175 µg kg(-1), respectively. The applicability of these assay formats was demonstrated by evaluating the performance characteristics of both tests through performing multiple experiments on different days. Both assays were further evaluated by analyzing naturally contaminated samples in the laboratory and also in the field under tropical conditions (Cameroon, West Africa). The false-negative rate with both formats was less than 5%, which is in good agreement with Commission Decision 2002/657/EC regarding the performance of analytical methods intended for screening purposes.

Novel gel-based rapid test for non-instrumental detection of ochratoxin A in beer.

A rapid easy-to-use immunoassay was optimised for the non-instrumental detection of ochratoxin A (OTA) in beer. The analytical method involves preconcentration on the immunoaffinity layer inside a column followed by direct competitive ELISA detection in the same layer. The visual cut-off value, i.e. the lowest OTA concentration resulting in no colour development, was 0.2 microg L(-1). Assay validation was performed using samples spiked with OTA. Thirty-seven naturally contaminated samples were screened with the gel-based method developed and no false-negative results were obtained. The method described offers a simple, rapid and cost-effective screening tool, thus contributing to better health protection of consumers.

Immunochemical methods for rapid mycotoxin detection: evolution from single to multiple analyte screening: a review.

This review focuses on recent developments in immunochemical methods for detection of mycotoxins, with a particular emphasis on simultaneous multiple analyte determination. This includes high-throughput instrumental analysis for the laboratory environment (microtitre plate enzyme-linked immunoabsorbant assay (ELISA), different kinds of immunosensors, fluorescence polarization immunoassay, and capillary electrophoretic immunoassay), as well as rapid visual tests for on-site testing (lateral-flow, dipstick, flow-through and column tests). For each type of immunoassay, perspectives for multiple analyte application are discussed and examples cited.