Dual-Targeting of the HER2 Cancer Receptor with an Antibody-Directed Enzyme and a Nanobody-Guided MMAE Prodrug Scaffold.

Antibody-enzyme conjugates have shown potential as tissue-specific prodrug activators by antibody-directed enzyme prodrug therapy (ADEPT), but the approach met challenges clinically due to systemic drug release. Here, we report a novel dual-targeting ADEPT system (DuADEPT) which is based on active cancer receptor targeting of both a trastuzumab-sialidase conjugate (Tz-Sia) and a highly potent sialidase-activated monomethyl auristatin E (MMAE) prodrug scaffold. The scaffold is based on a four-way junction of the artificial nucleic acid analog acyclic (L)-threoninol nucleic acid ((L)-aTNA) which at the ends of its four arms carries one nanobody targeting HER2 and three copies of the prodrug. Dual-targeting of the constructs to two proximal epitopes of HER2 was shown by flow cytometry, and a dual-targeted enzymatic drug release assay revealed cytotoxicity upon prodrug activation specifically for HER2-positive cancer cells. The specific delivery and activation of prodrugs in this way could potentially be used to decrease systemic side effects and increase drug efficacy, and utilization of Tz-Sia provides an opportunity to combine the local chemotherapeutic effect of the DuADEPT with an anticancer immune response.

Quantitative Detection of Digoxin in Plasma Using Small-Molecule Immunoassay in a Recyclable Gravity-Driven Microfluidic Chip.

Immunoassays are critical for clinical diagnostics and biomedical research. However, two major challenges remaining in conventional immunoassays are precise quantification and development of immunoassays for small-molecule detection. Here, a two signal-mode small-molecule immunoassay containing an internal reference that provides high stability and reproducibility compared to conventional small-molecule immunoassays is presented. A system is developed for quantitative monitoring of the digoxin concentration in plasma in the clinically relevant range (0.6-2.6 nm). Furthermore, the model system is integrated into a simple gravity-driven microfluidic chip (G-Chip) requiring only 10 µL plasma. The G-Chip allows fast detection without any complex operation and can be recycled for at least 50 times. The assay, and the G-Chip in particular, has the potential for further development of point-of-care (POC) diagnostics.

Imidazole carbamate probes for affinity guided azide-transfer to metal-binding proteins.

Probes for affinity guided conjugation have shown great promise for the preparation of high-quality protein conjugates. However, such probes are often limited in their protein scope. Here, we demonstrate the synthesis and use of imidazole carbamate probes for affinity guided conjugation of an azide handle to a wide variety of metal binding proteins such as antibodies, enzymes, nanobodies and His6-tagged proteins. The azide handles were used to link dyes to the proteins for gel analysis and binding studies. In a comparative study we find that the probe containing three NTA groups show higher selectivity than the probe containing two. In a mixture of proteins, the probe shows preference for labelling His6-tagged proteins.

Dimethyl fumarate is an allosteric covalent inhibitor of the p90 ribosomal S6 kinases.

Dimethyl fumarate (DMF) has been applied for decades in the treatment of psoriasis and now also multiple sclerosis. However, the mechanism of action has remained obscure and involves high dose over long time of this small, reactive compound implicating many potential targets. Based on a 1.9 Å resolution crystal structure of the C-terminal kinase domain of the mouse p90 Ribosomal S6 Kinase 2 (RSK2) inhibited by DMF we describe a central binding site in RSKs and the closely related Mitogen and Stress-activated Kinases (MSKs). DMF reacts covalently as a Michael acceptor to a conserved cysteine residue in the αF-helix of RSK/MSKs. Binding of DMF prevents the activation loop of the kinase from engaging substrate, and stabilizes an auto-inhibitory αL-helix, thus pointing to an effective, allosteric mechanism of kinase inhibition. The biochemical and cell biological characteristics of DMF inhibition of RSK/MSKs are consistent with the clinical protocols of DMF treatment.

AFM Imaging of Hybridization Chain Reaction Mediated Signal Transmission between Two DNA Origami Structures.

Signal transfer is central to the controlled exchange of information in biology and advanced technologies. Therefore, the development of reliable, long-range signal transfer systems for artificial nanoscale assemblies is of great scientific interest. We have designed such a system for the signal transfer between two connected DNA nanostructures, using the hybridization chain reaction (HCR). Two sets of metastable DNA hairpins, one of which is immobilized at specific points along tracks on DNA origami structures, are polymerized to form a continuous DNA duplex, which is visible using atomic force microscopy (AFM). Upon addition of a designed initiator, the initiation signal is efficiently transferred more than 200 nm from a specific location on one origami structure to an end point on another origami structure. The system shows no significant loss of signal when crossing from one nanostructure to another and, therefore, has the potential to be applied to larger multi-component DNA assemblies.

Phosphines as Efficient Dioxygen Scavengers in Nitrous Oxide Sensors.

A current challenge for development of amperometric sensors for the greenhouse gas nitrous oxide (N2O) is their sensitivity toward dioxygen and trace water. The need for aqueous dioxygen scavengers in front of the sensor implies a background signal from penetrating water vapor. In this paper, we introduce substituted phosphines as dioxygen scavengers and demonstrate the application in a dioxygen-insensitive N2O sensor. Suitably substituted phosphines have been synthesized to achieve good solubility properties in the electrochemically inert solvent propylene carbonate. Several sensors with and without physical separation of the sensing and dioxygen scavenging compartments were made and compared to current commercial sensors. The use of phosphines soluble in organic solvents as dioxygen scavengers yielded a higher sensitivity, albeit with longer response time. Proof-of-concept N2O sensors without the physically separated dioxygen scavenger chamber showed a greatly enhanced sensitivity with a comparable response time, thus demonstrating the possibility for greatly simplified sensor construction.

Programmed Switching of Single Polymer Conformation on DNA Origami.

DNA nanotechnology offers precise geometrical control of the positioning of materials, and it is increasingly also being used in the development of nanomechanical devices. Here we describe the development of a nanomechanical device that allows switching of the position of a single-molecule conjugated polymer. The polymer is functionalized with short single-stranded (ss) DNA strands that extend from the backbone of the polymer and serve as handles. The DNA polymer conjugate can be aligned on DNA origami in three well-defined geometries (straight line, left-turned, and right-turned pattern) by DNA hybridization directed by single-stranded guiding strands and ssDNA tracks extending from the origami surface and polymer handle. We demonstrate switching of a conjugated organic polymer conformation between left- and right-turned conformations of the polymer on DNA origami based on toehold-mediated strand displacement. The switching is observed by atomic force microscopy and by Förster resonance energy transfer between the polymer and two different organic dyes positioned in close proximity to the respective patterns. Using this method, the polymer conformation can be switched six times successively. This controlled nanomechanical switching of conjugated organic polymer conformation demonstrates unique control of the shape of a single polymer molecule, and it may constitute a new component for the development of reconfigurable nanophotonic and nanoelectronic devices.

Synthesis, dynamic combinatorial chemistry, and PCR amplification of 3'-5' and 3'-6' disulfide-linked oligonucleotides.

Disulfide dithymidines linked 3'-5' or 3'-6' were synthesized and incorporated into oligonucleotides through a combined phosphotriester and phosphoramidite solid-phase oligonucleotide synthesis approach. The disulfide links are cleaved and formed reversibly in the presence of thiols and oligonucleotides. This link was shown to be sequence-adaptive in response to given templates in the presence of mercaptoethanol. The artificial 3'-5' and 3'-6' disulfide link was tolerated by polymerases in the polymerase chain reaction (PCR). By using sequencing analysis, we show that single mutations frequently occurred randomly in the amplification products of the PCR.

Isothermal hybridization kinetics of DNA assembly of two-dimensional DNA origami.

The Watson-Crick base-pairing with specificity and predictability makes DNA molecules suitable for building versatile nanoscale structures and devices, and the DNA origami method enables researchers to incorporate more complexities into DNA-based devices. Thermally controlled atomic force microscopy in combination with nanomechanical spectroscopy with forces controlled in the pico Newton (pN) range as a novel technique is introduced to directly investigate the kinetics of multistrand DNA hybridization events on DNA origami nanopores under defined isothermal conditions. For the synthesis of DNA nanostructures under isothermal conditions at 60 °C, a higher hybridization rate, fewer defects, and a higher stability are achieved compared to room-temperature studies. By quantifying the assembly times for filling pores in origami structures at several constant temperatures, the fill factors show a consistent exponential increase over time. Furthermore, the local hybridization rate can be accelerated by adding a higher concentration of the staples. The new insight gained on the kinetics of staple-scaffold hybridization on the synthesis of two dimensional DNA origami structures may open up new routes and ideas for designing DNA assembly systems with increased potential for their application.

N,O6-partially acetylated chitosan nanoparticles hydrophobically-modified for controlled release of steroids and vitamin E.

Diosgenin, two synthetic analogs of brassinosteroids, testosterone and dl-α-tocopherol were covalently linked to synthetic water-soluble N,O6-partially acetylated chitosan, for their controlled release. Drug linking was confirmed by FTIR spectroscopy and proton NMR. Conjugates were also characterized by differential scanning calorimetry and wide-angle X-ray diffraction. These conjugates formed self-assembled nanoparticles in aqueous solution with particle sizes ranging from 197 to 358 nm and drug contents between 11.8 and 56.4% (w/w). Spherical 30-60 nm nanoparticles were observed by scanning electron microscopy and transmission electron microscopy upon drying. In vitro release studies performed at acid pH indicated a drug release dependence on substitution degree and particle sizes. Almost constant release rates were observed during the first 6-8h. Brassinosteroids-modified nanoparticles showed good agrochemical activity in radish seeds bioassay at 10(-1) to 10(-4) mg mL(-1). Tocopheryl-modified nanoparticles exhibited radical scavenging activity in DPPH test.

Self-assembled nanoparticles of modified-chitosan conjugates for the sustained release of DL-α-tocopherol.

Synthetic O6-succinylated chitosan and commercial glycol chitosan were covalently linked to dl-α-tocopheryl monoesters for controlled release of vitamin E. These conjugates formed self-assembled nanoparticles in aqueous solution with 254-496 nm mean diameters and dl-α-tocopherol contents between 27 and 39% (w/w). The particles appeared as 40-75 nm almost spherical nanoparticles when studied by scanning and transmission electron microscopy upon drying. Drug linking to chitosan matrix was confirmed by FTIR spectroscopy and proton NMR. Conjugates were also characterized by differential scanning calorimetry and wide-angle X-ray diffraction. In vitro tocopherol release studies performed in water at acid pH indicated a drug release dependence on drug content, hydrated particle sizes and employed chitosan derivative. Almost constant release rates were observed the first 7h. The obtained nanoparticles exhibited radical scavenging activity in DPPH essay. The potential of these nanoparticles was also demonstrated by the enhancement of HMVEC cell proliferation.

Direct visualization of transient thermal response of a DNA origami.

The DNA origami approach enables the construction of complex objects from DNA strands. A fundamental understanding of the kinetics and thermodynamics of DNA origami assembly is extremely important for building large DNA structures with multifunctionality. Here both experimental and theoretical studies of DNA origami melting were carried out in order to reveal the reversible association/disassociation process. Furthermore, by careful control of the temperature cycling via in situ thermally controlled atomic force microscopy, the self-assembly process of a rectangular DNA origami tile was directly visualized, unveiling key mechanisms underlying their structural and thermodynamic features.

Synthesis of dopamine and serotonin derivatives for immobilization on a solid support.

The two important neurotransmitters dopamine and serotonin are synthesized with short PEG tethers and immobilized on a magnetic solid support. The tether is attached to the aromatic moiety of the neurotransmitters to conserve their original functional groups. This approach causes minimal alteration of the original structure with the aim of optimizing the immobilized neurotransmitters for aptamer selection by SELEX. For the dopamine derivative, the tether is attached to the aromatic core of a dopamine precursor by the Sonogashira reaction. For serotonin, a link to the indole core is introduced by a Claisen rearrangement from the allylated phenol moiety of serotonin. The tethers are azide-functionalized, which enables coupling to alkyne-modified magnetic beads. The coupling to the magnetic beads is quantified by UV spectroscopy using Fmoc-monitoring of the immobilized dopamine and serotonin derivatives.

Single molecule microscopy methods for the study of DNA origami structures.

Single molecule microscopy techniques play an important role in the investigation of advanced DNA structures such as those created by the DNA origami method. Three single molecule microscopy techniques are particularly interesting for the investigation of complex self-assembled three-dimensional (3D) DNA nanostructures, namely single molecule fluorescence microscopy, atomic force microscopy (AFM), and cryogenic transmission electron microscopy (cryo-EM). Here we discuss the strengths of these three techniques and demonstrate how their interplay can yield very important and unique new insights into the structure and conformation of advanced biological nanostructures. The applications of the three single molecule microscopy techniques are illustrated by focusing on a self-assembled DNA origami 3D box nanostructure. Its size and structure were studied by AFM and cryo-EM, while the lid opening, which can be controlled by the addition of oligonucleotide keys, was recorded by Förster/fluorescence resonance energy transfer (FRET) spectroscopy.

Functional patterning of DNA origami by parallel enzymatic modification.

We demonstrate here a rapid and cost-effective technique for nanoscale patterning of functional molecules on the surface of a DNA origami. The pattern is created enzymatically by transferring a functionalized dideoxynucleotide to the 3'-end of an arbitrary selected set of synthetic DNA oligonucleotides positioned approximately 6 nm apart in a 70 × 100 nm(2) rectangular DNA origami. The modifications, which are performed in a single-tube reaction, provide an origami surface modified with a variety of functional groups including chemical handles, fluorescent dyes, or ligands for subsequent binding of proteins. Efficient labeling and patterning was demonstrated by gel electrophoresis shift assays, reverse-phase HPLC, mass spectrometry, atomic force microscopy (AFM) analysis, and fluorescence measurements. The results show a very high yield of oligonucleotide labeling and incorporation in the DNA origami. This method expands the toolbox for constructing several different modified DNA origami from the same set of staple strands.

Site-specific chemical labeling of long RNA molecules.

Site-specific labeling of RNA molecules is a valuable tool for studying their structure and function. Here, we describe a new site-specific RNA labeling method, which utilizes a DNA-templated chemical reaction to attach a label at a specific internal nucleotide in an RNA molecule. The method is nonenzymatic and based on the formation of a four-way junction, where a donor strand is chemically coupled to an acceptor strand at a specific position via an activated chemical group. A disulfide bond in the linker is subsequently cleaved under mild conditions leaving a thiol group attached to the acceptor-RNA strand. The site-specific thiol-modified target RNA can then be chemically labeled with an optional group, here demonstrated by coupling of a maleimide-functionalized fluorophore. The method is rapid and allows site specific labeling of both in vitro and in vivo synthesized RNA with a broad range of functional groups.

Single-molecule chemical reactions on DNA origami.

DNA nanotechnology and particularly DNA origami, in which long, single-stranded DNA molecules are folded into predetermined shapes, can be used to form complex self-assembled nanostructures. Although DNA itself has limited chemical, optical or electronic functionality, DNA nanostructures can serve as templates for building materials with new functional properties. Relatively large nanocomponents such as nanoparticles and biomolecules can also be integrated into DNA nanostructures and imaged. Here, we show that chemical reactions with single molecules can be performed and imaged at a local position on a DNA origami scaffold by atomic force microscopy. The high yields and chemoselectivities of successive cleavage and bond-forming reactions observed in these experiments demonstrate the feasibility of post-assembly chemical modification of DNA nanostructures and their potential use as locally addressable solid supports.

A yoctoliter-scale DNA reactor for small-molecule evolution.

The center of DNA three-way junctions, constituting a yoctoliter (10(-24) L) volume, is applied as an efficient reactor to create DNA-encoded libraries of chemical products. Amino acids and short peptides are linked to oligonucleotides via cleavable and noncleavable linkers. The oligonucleotide sequences contain two universal assembling domains at the center and a distal codon sequence specific for the attached building block. Stepwise self-assembly and chemical reactions of these conjugates in a combinatorial fashion create a library of pentapeptides in DNA three-way junctions in a single reaction vessel. We demonstrate the formation of an evenly distributed library of 100 peptides. Each library member contains a short synthetic peptide attached to a unique genetic code creating the necessary "genotype-phenotype" linkage essential to the process of in vitro molecular evolution. Selective enrichment of the [Leu]-enkephalin peptide from an original frequency of 1 in 10 million in a model library to a final frequency of 1.7% in only two rounds of affinity selection is described and demonstrates successful molecular evolution for a non-natural system.

Preparation temperature dependence of size and polydispersity of alkylthiol monolayer protected gold clusters.

The influence of preparation temperature on the size and size distribution of dodecylthiol monolayer protected gold clusters was studied. The monolayer protected clusters (MPCs) were synthesized by two different variations of the Brust-Schiffrin procedure. In all of the experiments, the stoichiometry of the reactants dodecylthiol, HAuCl(4), and sodium borohydride was kept constant, while the temperature was varied in the range of -18 to +90 degrees C. Two series were performed in which an aqueous solution of NaBH(4) was either added over 30 s or all in one portion. The size and size distribution of the MPCs were determined by small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). It has been demonstrated that in general the MPC size increases with elevated preparation temperatures.