Rib cage surgery for the treatment of scoliosis: a biomechanical study of correction mechanisms.

Rib shortening or lengthening are surgical options that are used to address the cosmetic rib cage deformity in scoliosis, but can also alter the equilibrium of forces acting on the spine, thus possibly counteracting in a mechanical way the scoliotic process and correcting the spinal deformities. Although rib surgeries have been successful in animal models, they have not gained wide clinical acceptance for mechanical correction of scoliosis due to the lack of understanding of the complex mechanisms of action involved during and after the operation. The objective of this study was to assess the biomechanical action of different surgical approaches on the rib cage for the treatment of scoliosis using a patient-specific finite element model of the spine and rib cage. Several unilateral and bilateral rib shortening/lengthening procedures were tested at different locations on the ribs (convex/concave side of the thoracic curvature; at the costo-transverse/costo-chondral joint; 20 and 40 mm adjustments). A biomechanical analysis was performed to assess the resulting geometry and load patterns in ribs, costo-vertebral articulations and vertebrae. Only slight immediate geometric variations were obtained. However, concave side rib shortening and convex side rib lengthening induced important loads on vertebral endplates that may lead to possible scoliotic spine correction depending on the remaining growth potential. Convex side rib shortening and concave side rib lengthening produced mostly cosmetic rib cage correction, but generated inappropriate loads on the vertebral endplates that could aggravate vertebral wedging. This study supports the concept of using concave side rib shortening or convex side rib lengthening as useful means to induce correction of the spinal scoliotic deformity during growth, though the effects of growth modulation from induced loads must be addressed in more detail to prove the usefulness of rib shortening/lengthening techniques.

Simulations of rib cage surgery for the management of scoliotic deformities.

Costoplasties are surgical options to treat rib cage deformities. The main concern of rib resections is often for the cosmetic improvement of the back shape of the patient. Other experimental and clinical studies have shown that a costoplasty can also produce mechanical correction of the spine. Based on the assumption that surgery on the rib cage can alter the equilibrium of forces acting on the spine, this study aims to investigate the biomechanical role of the ribs during the surgical treatment of scoliosis using a finite element model of the spine and rib cage. The model was generated from patient-specific geometric data. Concave side rib shortening and convex side rib lengthening have been simulated and evaluated. Slight post-operative immediate geometrical correction of the spine was found in any of the simulations. However, both kinds of simulation induced similar loads on the vertebral endplates. Resulting torques in the frontal plane tended to correct the scoliotic spine in the frontal plane acting against vertebral wedging. Important torques were also found in the sagittal plane, increasing the physiological kyphosis, and derotational torques promoted the improvement of the transverse plane deformation. This biomechanical analysis showed that appropriate rib surgery may counteract the progression of the spine deformity depending on the remaining growth potential. These findings support the concept of early interventions on the rib cage that may be a new approach of treatment to prevent curve progression in small to moderate idiopathic scoliotic deformities.