Performance and uncertainties of TSS stormwater sampling strategies from online time series.

The event mean concentrations (EMCs) that would have been obtained by four different stormwater sampling strategies are simulated by using total suspended solids (TSS) and flowrate time series (about one minute time-step and one year of data). These EMCs are compared to the reference EMCs calculated by considering the complete time series. The sampling strategies are assessed with datasets from four catchments: (i) Berlin, Germany, combined sewer overflow (CSO); (ii) Graz, Austria, CSO; (iii) Chassieu, France, separate sewer system; and (iv) Ecully, France, CSO. A sampling strategy in which samples are collected at constant time intervals over the rainfall event and sampling volumes are pre-set as proportional to the runoff volume discharged between two consecutive sample leads to the most representative results. Recommended sampling time intervals are of 5 min for Berlin and Chassieu (resp. 100 and 185 ha area) and 10 min for Graz and Ecully (resp. 335 and 245 ha area), with relative sampling errors between 7% and 20% and uncertainties in sampling errors of about 5%. Uncertainties related to sampling volumes, TSS laboratory analyses and beginning/ending of rainstorm events are reported as the most influent sources in the uncertainties of sampling errors and EMCs.

Forecasting of UV-Vis absorbance time series using artificial neural networks combined with principal component analysis.

This work proposes a methodology for the forecasting of online water quality data provided by UV-Vis spectrometry. Therefore, a combination of principal component analysis (PCA) to reduce the dimensionality of a data set and artificial neural networks (ANNs) for forecasting purposes was used. The results obtained were compared with those obtained by using discrete Fourier transform (DFT). The proposed methodology was applied to four absorbance time series data sets composed by a total number of 5705 UV-Vis spectra. Absolute percentage errors obtained by applying the proposed PCA/ANN methodology vary between 10% and 13% for all four study sites. In general terms, the results obtained were hardly generalizable, as they appeared to be highly dependent on specific dynamics of the water system; however, some trends can be outlined. PCA/ANN methodology gives better results than PCA/DFT forecasting procedure by using a specific spectra range for the following conditions: (i) for Salitre wastewater treatment plant (WWTP) (first hour) and Graz West R05 (first 18 min), from the last part of UV range to all visible range; (ii) for Gibraltar pumping station (first 6 min) for all UV-Vis absorbance spectra; and (iii) for San Fernando WWTP (first 24 min) for all of UV range to middle part of visible range.

Calibration of UV/Vis spectrophotometers: A review and comparison of different methods to estimate TSS and total and dissolved COD concentrations in sewers, WWTPs and rivers.

UV/Vis spectrophotometers have been used for one decade to monitor water quality in various locations: sewers, rivers, wastewater treatment plants (WWTPs), tap water networks, etc. Resulting equivalent concentrations of interest can be estimated by three ways: i) by manufacturer global calibration; ii) by local calibration based on the provided global calibration and grab sampling; iii) by advanced calibration looking for relations between UV/Vis spectra and corresponding concentrations from grab sampling. However, no study has compared the applied methods so far. This collaborative work presents a comparison between five different methods. A Linear Regression (LR), Support Vector Machine (SVM), EVOlutionary algorithm method (EVO) and Partial Least Squares (PLS) have been applied on various data sets (sewers, rivers, WWTPs under dry, wet and all weather conditions) and for three water quality parameters: TSS, COD total and dissolved. Two criteria (r(2) and Root Mean Square Error RMSE) have been calculated - on calibration and verification data subsets - to evaluate accuracy and robustness of the applied methods. Values of criteria have then been statistically analysed for all and separated data sets. Non-consistent outcomes come through this study. According to the Kruskal-Wallis test and RMSEs, PLS and SVM seem to be the best methods. According to uncertainties in laboratory analysis and ranking of methods, LR and EVO appear more robust and sustainable for concentration estimations. Conclusions are mostly independent of water matrices, weather conditions or concentrations investigated.

Influence of local calibration on the quality of online wet weather discharge monitoring: feedback from five international case studies.

This paper reports about experiences gathered from five online monitoring campaigns in the sewer systems of Berlin (Germany), Graz (Austria), Lyon (France) and Bogota (Colombia) using ultraviolet-visible (UV-VIS) spectrometers and turbidimeters. Online probes are useful for the measurement of highly dynamic processes, e.g. combined sewer overflows (CSO), storm events, and river impacts. The influence of local calibration on the quality of online chemical oxygen demand (COD) measurements of wet weather discharges has been assessed. Results underline the need to establish local calibration functions for both UV-VIS spectrometers and turbidimeters. It is suggested that practitioners calibrate locally their probes using at least 15-20 samples. However, these samples should be collected over several events and cover most of the natural variability of the measured concentration. For this reason, the use of automatic peristaltic samplers in parallel to online monitoring is recommended with short representative sampling campaigns during wet weather discharges. Using reliable calibration functions, COD loads of CSO and storm events can be estimated with a relative uncertainty of approximately 20%. If no local calibration is established, concentrations and loads are estimated with a high error rate, questioning the reliability and meaning of the online measurement. Similar results have been obtained for total suspended solids measurements.

First experiences in implementing a software-based support for patient recruitment at Heidelberg university hospital.

Clinical trials have often got problems in achieving their recruitment target. Making the recruitment process more efficient and timely is tried to achieve in Heidelberg by implementing a software-based system to support patient recruitment. The architecture implemented in Heidelberg was developed in a multi-center research project named 'EHR-based support for patient recruitment'. The architecture is generic as five distinct university hospitals developed it and found it implementable. The same architecture is also implemented at four other university hospitals in Germany. The system was implemented into the existing system architecture and can thus be implemented by the vendor of the system. This makes the system available to all customers of named systems.