Tailored Platinum Group Metal/Spinel Oxide Catalysts for Dynamically Enhanced Methane Oxidation.

A combined experimental and molecular modeling study identifies a family of spinel oxides that in combination with PGM (platinum group metals) provide enhanced methane oxidation activity. With a reduction in greenhouse gas (GHG) emissions urgently needed, there is renewed interest in the use of natural gas vehicles (NGVs) and engines (NGEs) for transportation, commerce, and industrial applications. NGVs and NGEs emit less CO2 than their petroleum-derived counterparts but may emit uncombusted methane, an even more potent GHG. For stoichiometric engines, methane oxidation catalysts containing PGM and spinel oxide in layered architectures offer increased methane oxidation activity and lower light-off temperatures (T50). The reducible spinel oxide has direct and indirect roles that are effectively described by the bulk oxygen vacancy formation energy (Evac). We apply density functional theory (DFT) to identify several earth-abundant, cobalt-rich spinel oxides with favorable Evac, shown to correlate with dynamic oxygen storage capacity (DOSC) and CO and H2 oxidation activity. We experimentally rank-order the DFT-identified spinel oxides in combination with Pt+Pd for their methane oxidation activity measurements, under both time-invariant and modulated feed conditions. We show good agreement between the activity and the DFT-computed reducibility of the spinel oxide. The findings suggest spinel reducibility is a key factor in achieving enhanced low-temperature methane conversion, enabled through a balance of methane activation on the PGM sites and subsequent oxidation of the intermediates and byproducts on spinel oxides. In agreement with its computationally predicted Evac, NiCo2O4 was confirmed to have the highest DOSC and lowest T50 among the tested spinel samples.

Deciphering the Olefin Isomerization-Polymerization Paradox of Palladium(II) Diimine Catalysts: Discovery of Simultaneous and Independent Pathways of Olefin Isomerization and Living Polymerization.

This work elucidates a long-standing unexplained paradox commonly observed within the polymerization of α-olefin using palladium (Pd)(II)-diimine catalysts, in which isomerization and living polymerization of α-olefins are both observed. With a classical mechanistic understanding of these complexes, this behavior is often dismissed and interpreted as experimental error. Herein, we present a comprehensive mechanistic investigation into this phenomenon that supports the existence of a novel mechanistic pathway for Pd(II)-diimine complexes. Part one of the mechanistic study lays the foundation of the proposed mechanism, in which neutral Pd(II)-diimine complexes were found to exhibit a moderate to good catalytic activity for olefin isomerization of α-olefins despite the established notion that catalyst activation is required. Extensive experimental and computational studies reveal the possibility of a partial dissociation of the diimine ligand, which frees up one coordination site and enables coordination-insertion. This finding is significant as the coexistence of two reactive coordination sites at the palladium center becomes a valid proposal for the activated cationic Pd(II)-diimine complexes. In part two, we examined and validated the simultaneously observed α-olefin isomerization and living polymerization using the cationic Pd(II)-diimine catalyst, which supports the presence of two independent reaction pathways of isomerization and polymerization, respectively. Moreover, the addition of a strong Lewis acid, such as AlCl3, accelerates the ligand dissociation and the consequential isomerization as it weakens the palladium-nitrogen bond through competitive binding. In part three, Lewis acid-triggered olefin isomerization-polymerization is employed to prepare living olefinic block copolymers and further synthesize novel polyolefin-polar block copolymers with unique architectures, distinct levels of branching, crystallinity, and polar functionality in a one-pot manner.

Platinum Graphene Catalytic Condenser for Millisecond Programmable Metal Surfaces.

Accelerating catalytic chemistry and tuning surface reactions require precise control of the electron density of metal atoms. In this work, nanoclusters of platinum were supported on a graphene sheet within a catalytic condenser device that facilitated electron or hole accumulation in the platinum active sites with negative or positive applied potential, respectively. The catalytic condenser was fabricated by depositing on top of a p-type Si wafer an amorphous HfO2 dielectric (70 nm), on which was placed the active layer of 2-4 nm platinum nanoclusters on graphene. A potential of ±6 V applied to the Pt/graphene layer relative to the silicon electrode moved electrons into or out of the active sites of Pt, attaining charge densities more than 1% of an electron or hole per surface Pt atom. At a level of charge condensation of ±10% of an electron per surface atom, the binding energy of carbon monoxide to a Pt(111) surface was computed via density functional theory to change 24 kJ mol-1 (0.25 eV), which was consistent with the range of carbon monoxide binding energies determined from temperature-programmed desorption (ΔBECO of 20 ± 1 kJ mol-1 or 0.19 eV) and equilibrium surface coverage measurements (ΔBECO of 14 ± 1 kJ mol-1 or 0.14 eV). Impedance spectroscopy indicated that Pt/graphene condensers with potentials oscillating at 3000 Hz exhibited negligible loss in capacitance and charge accumulation, enabling programmable surface conditions at amplitudes and frequencies necessary to achieve catalytic resonance.

Spatiotemporal Coke Coupling Enhances para-Xylene Selectivity in Highly Stable MCM-22 Catalysts.

Identifying zeolite catalysts that can simultaneously optimize p-xylene selectivity and feed utilization is critical to toluene alkylation with methanol (TAM). Here, we show that zeolite MCM-22 (MWW) has an exceptional catalyst lifetime in the TAM reaction at high operating pressure, conversion, and selectivity. We systematically probe the catalytic behavior of active sites in distinct topological features of MCM-22, revealing that high p-xylene yield and catalyst stability are predominantly attributed to sinusoidal channels and supercages, respectively. Using a combination of catalyst design and testing, density functional theory, and molecular dynamics simulations, we propose a spatiotemporal coke coupling phenomenon to explain a multistage p-xylene selectivity profile wherein the formation of light coke in supercages initiates the deactivation of unselective external surface sites. Our findings indicate that the specific nature of coke is critical to catalyst performance. Moreover, they provide unprecedented insight into the synchronous roles of distinct topological features giving rise to the exceptional stability and selectivity of MCM-22 in the TAM reaction.

Atomic Properties of Monoclinic Ag2Se Thin Film Grown on SrTiO3 Substrate by Molecular Beam Epitaxy.

Silver chalcogenides have attracted a great deal of interest due to their promise for exhibiting novel topological properties. Using scanning tunneling microscopy/spectroscopy (STM/S), we have characterized the atomic structure and electronic properties of a monoclinic Ag2Se thin film, similar to ß-Ag2Te, grown on a SrTiO3 (STO)(001) substrate by molecular beam epitaxy (MBE). Three different types of Ag2Se atomic terminations are observed on the surface: (i) homogeneous hexagonal-like, (ii) rough mixed, and (iii) flat zigzag-striped structures. Structural analysis indicates that the different atomic terminations stem from different growth directions, which can be attributed to the lattice mismatch between the substrate and the Ag2Se film. STS analysis of these atomic terminations uncovers different features near the Fermi level, indicating constituent- and direction-dependent electronic properties. This Letter presents a practical method to grow monoclinic thin film Ag2Se and provides insight into its physical properties.

Kinetics of H2 Adsorption at the Metal-Support Interface of Au/TiO2 Catalysts Probed by Broad Background IR Absorbance.

H2 adsorption on Au catalysts is weak and reversible, making it difficult to quantitatively study. We demonstrate H2 adsorption on Au/TiO2 catalysts results in electron transfer to the support, inducing shifts in the FTIR background. This broad background absorbance (BBA) signal is used to quantify H2 adsorption; adsorption equilibrium constants are comparable to volumetric adsorption measurements. H2 adsorption kinetics measured with the BBA show a lower Eapp value (23 kJ mol-1 ) for H2 adsorption than previously reported from proxy H/D exchange (33 kJ mol-1 ). We also identify a previously unreported H-O-H bending vibration associated with proton adsorption on electronically distinct Ti-OH metal-support interface sites, providing new insight into the nature and dynamics of H2 adsorption at the Au/TiO2 interface.

Ethylene Dehydroaromatization over Ga-ZSM-5 Catalysts: Nature and Role of Gallium Speciation.

Bifunctional catalysis in zeolites possessing both Brønsted and Lewis acid sites offers unique opportunities to tailor shape selectivity and enhance catalyst performance. Here, we examine the impact of framework and extra-framework gallium species on enriched aromatics production in zeolite ZSM-5. We compare three distinct methods of preparing Ga-ZSM-5 and reveal direct (single step) synthesis leads to optimal catalysts compared to post-synthesis methods. Using a combination of state-of-the-art characterization, catalyst testing, and density functional theory calculations, we show that Ga Lewis acid sites strongly favor aromatization. Our findings also suggest Ga(framework)-Ga(extra-framework) pairings, which can only be achieved in materials prepared by direct synthesis, are the most energetically favorable sites for reaction pathways leading to aromatics. Calculated acid site exchange energies between extra-framework Ga at framework sites comprised of either Al or Ga reveal a site-specific preference for stabilizing Lewis acids, which is qualitatively consistent with experimental measurements. These findings indicate the possibility of tailoring Lewis acid siting by the placement of Ga heteroatoms at distinct tetrahedral sites in the zeolite framework, which can have a marked impact on catalyst performance relative to conventional H-ZSM-5.

Water Poisons H2 Activation at the Au-TiO2 Interface by Slowing Proton and Electron Transfer between Au and Titania.

Understanding the dynamic changes at the active site during catalysis is a fundamental challenge that promises to improve catalytic properties. While performing Arrhenius studies during H2 oxidation over Au/TiO2 catalysts, we found different apparent activation energies (Eapp) depending on the feedwater pressure. This is partially attributed to changing numbers of metal-support interface (MSI) sites as water coverage changes with temperature. Constant water coverage studies showed two kinetic regimes: fast heterolytic H2 activation directly at the MSI (Eapp ∼ 25 kJ/mol) and significantly slower heterolytic H2 activation mediated by water (Eapp ∼ 45 kJ/mol). The two regimes had significantly different kinetics, suggesting a complicated mechanism of water poisoning. Density functional theory (DFT) showed water has minor effects on the reaction thermodynamics, primarily attributable to intrinsic differences in surface reactivity of different Au sites in the DFT model. The DFT model suggested significant surface restructuring of the TiO2 support during heterolytic H2 adsorption; evidence for this phenomenon was observed during in situ infrared spectroscopy experiments. A monolayer of water on the hydroxylated TiO2 surface increased the H2 dissociation activation barrier by ∼0.2 eV, in good agreement the difference in experimentally measured values. DFT calculations suggested H2 activation goes through a proton-coupled electron-transfer-like mechanism. During proton transfer to a basic support hydroxyl group, electron density is distributed through the gold nanorod and partially localized on the protonated support hydroxyl group. Water slows H2 activation by slowing this H+ transfer, forcing negative charge buildup on the Au and increasing the transition state energy.

Stabilizing the Interface between Sodium Metal Anode and Sulfide-Based Solid-State Electrolyte with an Electron-Blocking Interlayer.

Sulfide-based Na-ion conductors are promising electrolytes for all-solid-state sodium batteries (ASSSBs) because of high ionic conductivity and favorable formability. However, no effective strategy has been reported for long-duration Na cycling with sulfide-based electrolytes because of interfacial challenges. Here we demonstrate that a cellulose-poly(ethylene oxide) (CPEO) interlayer can stabilize the interface between sulfide electrolyte (Na3SbS4) and Na by shutting off the electron pathway of the electrolyte decomposition reaction. As a result, we achieved stable Na plating/stripping for 800 cycles at 0.1 mA cm-2 in all-solid-state devices at 60 °C.

H2 Oxidation over Supported Au Nanoparticle Catalysts: Evidence for Heterolytic H2 Activation at the Metal-Support Interface.

Water adsorbed at the metal-support interface (MSI) plays an important role in multiple reactions. Due to its importance in CO preferential oxidation (PrOx), we examined H2 oxidation kinetics in the presence of water over Au/TiO2 and Au/Al2O3 catalysts, reaching the following mechanistic conclusions: (i) O2 activation follows a similar mechanism to that proposed in CO oxidation catalysis; (ii) weakly adsorbed H2O is a strong reaction inhibitor; (iii) fast H2 activation occurs at the MSI, and (iv) H2 activation kinetics are inconsistent with traditional dissociative H2 chemisorption on metals. Density functional theory (DFT) calculations using a supported Au nanorod model suggest H2 activation proceeds through a heterolytic dissociation mechanism, resulting in a formal hydride residing on the Au and a proton bound to a surface TiOH group. This potential mechanism was supported by infrared spectroscopy experiments during H2 adsorption on a deuterated Au/TiO2 surface, which showed rapid H-D scrambling with surface hydroxyl groups. DFT calculations suggest that the reaction proceeds largely through proton-mediated pathways and that typical Brønsted-Evans Polanyi behavior is broken by introducing weak acid/base sites at the MSI. The kinetics data were successfully reinterpreted in the context of the heterolytic H2 activation mechanism, tying together the experimental and computational evidence and rationalizing the observed inhibition by physiorbed water on the support as blocking the MSI sites required for heterolytic H2 activation. In addition to providing evidence for this unusual H2 activation mechanism, these results offer additional insight into why water dramatically improves CO PrOx catalysis over Au.

Finite Size Effects in Submonolayer Catalysts Investigated by CO Electrosorption on PtsML/Pd(100).

A combination of scanning tunneling microscopy, subtractively normalized interfacial Fourier transform infrared spectroscopy (SNIFTIRS), and density functional theory (DFT) is used to quantify the local strain in 2D Pt clusters on the 100 facet of Pd and its effect on CO chemisorption. Good agreement between SNIFTIRS experiments and DFT simulations provide strong evidence that, in the absence of coherent strain between Pt and Pd, finite size effects introduce local compressive strain, which alters the chemisorption properties of the surface. Though this effect has been widely neglected in prior studies, our results suggest that accurate control over cluster sizes in submonolayer catalyst systems can be an effective approach to fine-tune their catalytic properties.

Synthesis Strategies for Ultrastable Zeolite GIS Polymorphs as Sorbents for Selective Separations.

Designing zeolites with tunable physicochemical properties can substantially impact their performance in commercial applications, such as adsorption, separations, catalysis, and drug delivery. Zeolite synthesis typically requires an organic structure-directing agent to produce crystals with specific pore topology. Attempts to remove organics from syntheses to achieve commercially viable methods of preparing zeolites often lead to the formation of impurities. Herein, we present organic-free syntheses of two polymorphs of the small-pore zeolite P (GIS), P1 and P2. Using a combination of adsorption measurements and density functional theory calculations, we show that GIS polymorphs are selective adsorbents for H2 O relative to other light gases (e.g., H2 , N2 , CO2 ). Our findings refute prior theoretical studies postulating that GIS-type zeolites are excellent materials for CO2 separation/sequestration. We also show that P2 is significantly more thermally stable than P1, which broadens the operating conditions for GIS-type zeolites in commercial applications and opens new avenues for exploring their potential use in processes such as catalysis.

Synergistic Effects in Bimetallic Palladium-Copper Catalysts Improve Selectivity in Oxygenate Coupling Reactions.

Condensation reactions such as Guerbet and aldol are important since they allow for C-C bond formation and give higher molecular weight oxygenates. An initial study identified Pd-supported on hydrotalcite as an active catalyst for the transformation, although this catalyst showed extensive undesirable decarbonylation. A catalyst containing Pd and Cu in a 3:1 ratio dramatically decreased decarbonylation, while preserving the high catalytic rates seen with Pd-based catalysts. A combination of XRD, EXAFS, TEM, and CO chemisorption and TPD revealed the formation of CuPd bimetallic nanoparticles with a Cu-enriched surface. Finally, density functional theory studies suggest that the surface segregation of Cu atoms in the bimetallic alloy catalyst produces Cu sites with increased reactivity, while the Pd sites responsible for unselective decarbonylation pathways are selectively poisoned by CO.

Epitaxial Growth of ZSM-5@Silicalite-1: A Core-Shell Zeolite Designed with Passivated Surface Acidity.

The design of materials with spatially controlled chemical composition has potential advantages for wide-reaching applications that span energy to medicine. Here, we present a method for preparing a core-shell aluminosilicate zeolite with continuous translational symmetry of nanopores and an epitaxial shell of tunable thickness that passivates Brønsted acid sites associated with framework Al on exterior surfaces. For this study, we selected the commercially relevant MFI framework type and prepared core-shell particles consisting of an aluminosilicate core (ZSM-5) and a siliceous shell (silicalite-1). Transmission electron microscopy and gas adsorption studies confirmed that silicalite-1 forms an epitaxial layer on ZSM-5 crystals without blocking pore openings. Scanning electron microscopy and dynamic light scattering were used in combination to confirm that the shell thickness can be tailored with nanometer resolution (e.g., 5-20 nm). X-ray photoelectron spectroscopy and temperature-programmed desorption measurements revealed the presence of a siliceous shell, while probe reactions using molecules that were either too large or adequately sized to access MFI pores confirmed the uniform shell coverage. The synthesis of ZSM-5@silicalite-1 offers a pathway for tailoring the physicochemical properties of MFI-type materials, notably in the area of catalysis, where surface passivation can enhance product selectivity without sacrificing catalyst activity. The method described herein may prove to be a general platform for zeolite core-shell design with potentially broader applicability to other porous materials.

Interlayer-expanded molybdenum disulfide nanocomposites for electrochemical magnesium storage.

Mg rechargeable batteries (MgRBs) represent a safe and high-energy battery technology but suffer from the lack of suitable cathode materials due to the slow solid-state diffusion of the highly polarizing divalent Mg ion. Previous methods improve performance at the cost of incompatibility with anode/electrolyte and drastic decrease in volumetric energy density. Herein we report interlayer expansion as a general and effective atomic-level lattice engineering approach to transform inactive intercalation hosts into efficient Mg storage materials without introducing adverse side effects. As a proof-of-concept we have combined theory, synthesis, electrochemical measurement, and kinetic analysis to improve Mg diffusion behavior in MoS2, which is a poor Mg transporting material in its pristine form. First-principles simulations suggest that expanded interlayer spacing allows for fast Mg diffusion because of weakened Mg-host interactions. Experimentally, the expansion was realized by inserting a controlled amount of poly(ethylene oxide) into the lattice of MoS2 to increase the interlayer distance from 0.62 nm to up to 1.45 nm. The expansion boosts Mg diffusivity by 2 orders of magnitude, effectively enabling the otherwise barely active MoS2 to approach its theoretical storage capacity as well as to achieve one of the highest rate capabilities among Mg-intercalation materials. The interlayer expansion approach can be leveraged to a wide range of host materials for the storage of various ions, leading to novel intercalation chemistry and opening up new opportunities for the development of advanced materials for next-generation energy storage.

The critical role of water at the gold-titania interface in catalytic CO oxidation.

We provide direct evidence of a water-mediated reaction mechanism for room-temperature CO oxidation over Au/TiO2 catalysts. A hydrogen/deuterium kinetic isotope effect of nearly 2 implicates O-H(D) bond breaking in the rate-determining step. Kinetics and in situ infrared spectroscopy experiments showed that the coverage of weakly adsorbed water on TiO2 largely determines catalyst activity by changing the number of active sites. Density functional theory calculations indicated that proton transfer at the metal-support interface facilitates O2 binding and activation; the resulting Au-OOH species readily reacts with adsorbed Au-CO, yielding Au-COOH. Au-COOH decomposition involves proton transfer to water and was suggested to be rate determining. These results provide a unified explanation to disparate literature results, clearly defining the mechanistic roles of water, support OH groups, and the metal-support interface.

Water-mediated proton hopping on an iron oxide surface.

The diffusion of hydrogen atoms across solid oxide surfaces is often assumed to be accelerated by the presence of water molecules. Here we present a high-resolution, high-speed scanning tunneling microscopy (STM) study of the diffusion of H atoms on an FeO thin film. STM movies directly reveal a water-mediated hydrogen diffusion mechanism on the oxide surface at temperatures between 100 and 300 kelvin. Density functional theory calculations and isotope-exchange experiments confirm the STM observations, and a proton-transfer mechanism that proceeds via an H(3)O(+)-like transition state is revealed. This mechanism differs from that observed previously for rutile TiO(2)(110), where water dissociation is a key step in proton diffusion.

CO-induced embedding of Pt adatoms in a partially reduced FeO(x) film on Pt(111).

The reduction of a single-layer FeO film grown on Pt(111) by CO at elevated pressures and temperatures has been studied through an interplay of scanning tunneling microscopy, ambient-pressure X-ray photoelectron spectroscopy, and density functional theory calculations. Exposure of the FeO thin film to CO at pressures between 1 and 30 Torr and temperatures between 500 and 530 K leads to formation of a honeycomb-structured Fe(3)O(2) film with hollow sites occupied by single Pt atoms extracted from the substrate surface. The formation of these adatoms is driven by an increase in CO adsorption energy. In addition, the structure incorporates undercoordinated Fe centers, which are proposed to have substantial effects on the catalytic properties of the surface.