Evaluation of Cytocompatibility of PEEK-Based Composites as a Function of Manufacturing Processes.

The biocompatible polymer polyetheretherketone (PEEK) is a suitable candidate to be part of potential all-polymer total joint replacements, provided its use is associated with better osseointegration, mechanical performance, and wear resistance. Seeking to meet the aforementioned requirements, respectively, we have manufactured a PEEK composite with different fillers: carbon fibers (CF), hydroxyapatite particles (HA) and graphene platelets (GNP). The mechanical outcomes of the composites with combinations of 0, 1.5, 3.0 wt% GNP, 5 and 15 wt% HA and 30% of wt% CF concentrations pointed out that one of the best filler combinations to achieve the previous objectives was 30 wt% CF, 8 wt% HA and 2 wt% of GNP. The study compares the bioactivity of human osteoblasts on this composite prepared by injection molding with that on the material manufactured by the Fused Filament Fabrication 3D additive technique. The results indicate that the surface adhesion and proliferation of human osteoblasts over time are better with the composite obtained by injection molding than that obtained by 3D printing. This result is more closely correlated with morphological parameters of the composite surface than its wettability behavior.

Light Energy Efficiency in Lettuce Crop: Structural Indoor Designs Simulation.

Indoor agricultural offers efficient alternatives for intensive food production through automation technologies and controlled environments. Light plays a crucial role in plant development; however, photons captured by the crop are often wasted in empty spaces, resulting in low light efficiency and high energy costs. This research aims to simulate eight structural designs for an indoor lettuce crop, exploring different planting systems and light and culture bed combinations (static and mobile) to identify the most effective mechanism for light efficiency during crop growth. The simulations were carried out with spreadsheets based on applying formulas of yield in dry biomass per photosynthetic photons, lighting costs, harvest, and production. The results indicate that Circular Moving Light and Mobile Culture Bed with Quincunx Planting (CML-QM) and Circular Moving Light and Mobile Culture Bed with Linear Planting (CML-LPM) exhibit higher photon capture percentages (85% and 80%, respectively) and lower electricity consumption compared to static designs. The simulation results demonstrate the potential for significant improvements in photon capture and cost savings through optimized system designs. This investigation provides valuable insights for designing more efficient systems and reducing electricity consumption to enhance the capture of photosynthetic photons in indoor lettuce cultivation.

Biomechanical Behavior of Dynamic vs. Static Distal Locking Intramedullary Nails in Subtrochanteric Femur Fractures.

OBJECTIVE: Hip fractures are one of the most frequent fractures presenting to the emergency department and orthopedic trauma teams. The aim of this study was to determine the best indication and therapeutic technique for subtrochanteric fractures and unifying criteria when choosing the most suitable type of nail. MATERIALS AND METHODS: To analyze the influence of the material and the type of distal locking of intramedullary nails (static or dynamic), a femur model with a fracture in the subtrochanteric region stabilized with a long Gamma intramedullary nail was applied using finite element method (FEM) simulation. RESULTS: The mechanical study shows that titanium nails allow for greater micromobility at the fracture site, which could act as a stimulus for the formation of callus and consolidation of the fracture. In the mechanical study, the type of distal locking mainly affects mobility at the fracture site and stress in the cortical bone around the distal screws, without in any case exceeding values that may compromise the viability of the assembly or that may result in detrimental effects (in terms of mobility at the fracture site) for the consolidation process. CONCLUSION: Subtrochanteric fractures treated with titanium nail and static distal locking is safe and does not hinder consolidation.

Morphological and molecular identification of the brown dog tick in Mexico.

Ticks of the Rhipicephalus sanguineus complex are known as the brown dog ticks. This complex groups at least 12 species of ticks that are distributed worldwide. On the American continents, R. sanguineus sensu stricto (s.s.), is distributed in temperate areas, while Rhipicephalus sanguineus sensu lato (s.l.), also called "tropical lineage" is distributed in tropical regions. Previous analyses of brown dog ticks from Mexico have identified the so-called tropical lineage and the country generally has a climate more favorable for these ticks (> 20o C in average). In addition, some pathogens thought to be transmitted by this lineage (such as Ehrlichia canis, and Rickettsia rickettsii) are prevalent in Mexico. Herein we aim to contribute to the study of brown dog ticks by providing morphological identification and molecular analysis of mt 12S rDNA and 16S rDNA sequences from ticks collected from 12 states in Mexico. Our results indicate that the tropical lineage of R. sanguineus s.l., recently redescribed as R. linnaei is widely distributed in Mexico.

Armeria maritima (Mill.) Willd. Flower Hydromethanolic Extract for Cucurbitaceae Fungal Diseases Control.

The cliff rose (Armeria maritima), like other halophytes, has a phenolics-based antioxidant system that allows it to grow in saline habitats. Provided that antioxidant properties are usually accompanied by antimicrobial activity, in this study we investigated the phytochemicals present in a hydromethanolic extract of A. maritima flowers and explored its antifungal potential. The main phytocompounds, identified by gas chromatography-mass spectrometry, were: hexadecanoic acid, octadecanoic acid, 9-octadecenoic acid, 3-(3,4-dihydroxy-phenyl)-acrylic acid ethyl ester, and benzeneacetaldehyde. The antifungal activity of the extract and its main constituents-alone and in combination with chitosan oligomers-was tested against six pathogenic taxa associated with soil-borne diseases of plant hosts in the family Cucurbitaceae: Fusarium equiseti, F. oxysporum f. sp. niveum, Macrophomina phaseolina, Neocosmospora falciformis, N. keratoplastica, and Sclerotinia sclerotiorum. In in vitro tests, EC90 effective concentrations in the 166-865 µg·mL-1 range were obtained for the chitosan oligomers-A. maritima extract conjugate complexes, lower than those obtained for fosetyl-Al and azoxystrobin synthetic fungicides tested for comparison purposes, and even outperforming mancozeb against F. equiseti. In ex situ tests against S. sclerotiorum conducted on artificially inoculated cucumber slices, full protection was achieved at a dose of 250 µg·mL-1. Thus, the reported results support the valorization of A. maritima as a source of biorationals for Cucurbitaceae pathogens protection, suitable for both organic and conventional agriculture.

Silene uniflora Extracts for Strawberry Postharvest Protection.

Halophytes are gaining considerable attention due to their applications in saline agriculture, phytoremediation, medicine, and secondary metabolite production. This study investigated the bioactive components present in Silene uniflora (sea campion) hydromethanolic extract, and their antimicrobial activity was evaluated both in vitro and ex situ against two strawberry phytopathogens, namely Botrytis cinerea (grey mold) and Colletotrichum nymphaeae (anthracnose fruit rot). The main identified phytochemicals were mome inositol, saturated fatty acid esters, and cyclotetracosane. In vitro tests demonstrated complete inhibition of the growth of B. cinerea and C. nymphaeae at extract concentrations of 1000 and 1500 µg·mL-1, respectively, with an activity comparable to that of fosetyl-Al and substantially higher than that of azoxystrobin. This activity was improved upon conjugation with chitosan oligomers (COS), yielding inhibition values of 750 and 1000 µg·mL-1. The COS-S. uniflora conjugate complexes were then tested as protective treatments for postharvest storage of strawberry fruit, resulting in high protection against artificially inoculated B. cinerea and C. nymphaeae at doses of 3750 and 5000 µg·mL-1, respectively. The reported results open the door to the valorization of this halophyte as a source of biorationals for strawberry protection.

Murine typhus and other potentially lethal rickettsial diseases in Chiapas, Mexico.

Not available.

Three-Dimensional Computational Model Simulating the Initial Callus Growth during Fracture Healing in Long Bones: Application to Different Fracture Types.

Bone fractures are among the most common and potentially serious injuries to the skeleton, femoral shaft fractures being especially severe. Thanks to recent advances in the area of in silico analysis, several approximations of the bone healing process have been achieved. In this context, the objective of this work was to simulate the initial phase of callus formation in long bones, without a pre-meshed domain in the 3D space. A finite element approach was computationally implemented to obtain the values of the cell concentrations along the whole domain and evaluate the areas where the biological quantities reached the thresholds necessary to trigger callus growth. A voxel model was used to obtain the 3D domain of the bone fragments and callus. A mesh growth algorithm controlled the addition of new elements to the domain at each step of the iterative procedure until complete callus formation. The implemented approach is able to reproduce the generation of the primary callus, which corresponds to the initial phase of fracture healing, independently of the fracture type and complexity, even in the case of several bone fragments. The proposed approach can be applied to the most complex bone fractures such as oblique, severely comminuted or spiral-type fractures, whose simulation remains hardly possible by means of the different existing approaches available to date.

Development and validation of a novel detection method for Rickettsia rickettsii using a loop-mediated isothermal amplification assay.

Introduction: Rickettsia rickettsii is an obligate, intracellular pathogen and the causative agent of Rocky Mountain spotted fever (RMSF). RMSF is an important zoonotic disease due to its high fatal outcome in humans. The difficulty of clinical diagnosis due to the low sensitivity and specificity of current diagnostic methods are a principal setback. We reported the development of a new method for the detection of R. rickettsii in human and tick DNA samples using loop-mediated isothermal amplification (LAMP), as well as the validation of the LAMP test for R. rickettsii in field samples of infected ticks and humans, determining the diagnostic sensitivity and specificity, as well as the reproducibility of the test. Methods: This technique uses hydroxy naphthol blue (HNB) as an indicator of the formation of magnesium pyrophosphate, a marker for the presence of DNA. Here, we used a putative R. rickettsii gene as a target for three pairs of primers that specifically amplify R. rickettsii DNA by hairpin-based isothermal amplification technique (LAMP). Results and discussion: The sensitivity of the assay was ~1.6-3 pg, which is 10 times more sensitive than PCR. To determine the diagnostics specificity and sensitivity, 103 human DNA samples and 30 tick DNA samples were evaluated. For the human samples, a sensitivity for HNB of 93%, a specificity of 70% and a k of 0.53 were obtained. For electrophoresis the sensitivity was 97% with a specificity of 58% and a k of 0.42. For tick samples, a sensitivity of 80% was obtained, a specificity of 93% for HNB and for electrophoresis the sensitivity and specificity were 87%. The k for both was 0.73. The degree of concordance between HNB and electrophoresis was 0.82 for humans and for ticks, it was 0.87. The result is obtained in shorter time, compared to a PCR protocol, and is visually interpreted by the color change. Therefore, this method could be a reliable tool for the early diagnosis of rickettsiosis.

Continuous and interrupted abdominal-wall closure after primary emergency midline laparotomy (CONIAC-trial): study protocol for a randomised controlled single centre trial.

INTRODUCTION: The optimal closure of the abdominal wall after emergency midline laparotomy is still a matter of debate due to lack of evidence. Although closure of the fascia using a continuous, all-layer suture technique with slowly absorbable monofilament material is common, complications like burst abdomen and hernia are frequent. METHODS AND ANALYSIS: This randomised controlled trial with a 1:1 allocation evaluates the efficacy and safety of a continuous suture with or without additional interrupted retention sutures for closure of the abdominal fascia. Patients with an indication for a primary emergency midline laparotomy are eligible to participate in this study and will be randomised intraoperatively via block randomisation. Fascia closure in the intervention group will be done with a standard continuous suture with slowly absorbable monofilament material (MonoMax 1, B. Braun, Tuttlingen, Germany) and additional interrupted retention sutures every 2 cm of the fascia using rapidly absorbable braided material (Vicryl 2, Ethicon, Norderstedt, Germany). In the control group, the fascia is closed only with the standard continuous suture with slowly absorbable monofilament material. Sample size calculations (n=111 per study arm) are based on the available literature. The primary endpoint is the rate of dehiscence of the abdominal fascia (rate of burst abdomen within 30 days or rate of incisional hernia within 12 months). Secondary endpoints are wound infections, quality of life, length of hospital stay, morbidity and mortality. Patients as well as individuals involved in data collection, endpoint assessment, data analysis and quality of life assessment will be blinded. ETHICS AND DISSEMINATION: The study protocol, the patient information and the informed consent form have been approved by the ethics committee of the Ludwig-Maximilians-University, Munich, Germany (reference number: 20-1041). Study findings will be submitted for publication in peer-reviewed journals. TRIAL REGISTRATION NUMBER: DRKS00024802. WHO UNIVERSAL TRIAL NUMBER: U1111-1259-1956.

Daily Estimation of Global Solar Irradiation and Temperatures Using Artificial Neural Networks through the Virtual Weather Station Concept in Castilla and León, Spain.

In this article, the interpolation of daily data of global solar irradiation, and the maximum, average, and minimum temperatures were measured. These measurements were carried out in the agrometeorological stations belonging to the Agro-climatic Information System for Irrigation (SIAR, in Spanish) of the Region of Castilla and León, in Spain, through the concept of Virtual Weather Station (VWS), which is implemented with Artificial Neural Networks (ANNs). This is serving to estimate data in every point of the territory, according to their geographic coordinates (i.e., longitude and latitude). The ANNs of the Multilayer Feed-Forward Perceptron (MLP) used are daily trained, along with data recorded in 53 agro-meteorological stations, and where the validation of the results is conducted in the station of Tordesillas (Valladolid). The ANN models for daily interpolation were tested with one, two, three, and four neurons in the hidden layer, over a period of 15 days (from 1 to 15 June 2020), with a root mean square error (RMSE, MJ/m2) of 1.23, 1.38, 1.31, and 1.04, respectively, regarding the daily global solar irradiation. The interpolation of ambient temperature also performed well when applying the VWS concept, with an RMSE (°C) of 0.68 for the maximum temperature with an ANN of four hidden neurons, 0.58 for the average temperature with three hidden neurons, and 0.83 for the minimum temperature with four hidden neurons.

Analysis of Biophysical Variables in an Onion Crop (Allium cepa L.) with Nitrogen Fertilization by Sentinel-2 Observations.

The production of onions bulbs (Allium cepa L.) requires a high amount of nitrogen. According to the demand of sustainable agriculture, the information-development and communication technologies allow for improving the efficiency of nitrogen fertilization. In the south of the province of Buenos Aires, Argentina, between 8000 and 10,000 hectares per year-1 are cultivated in the districts of Villarino and Patagones. This work aimed to analyze the relationship of biophysical variables: leaf area index (LAI), canopy chlorophyll content (CCC), and canopy cover factor (fCOVER), with the nitrogen fertilization of an intermediate cycle onion crop and its effects on yield. A field trial study with different doses of granulated urea and granulated urea was carried out, where biophysical characteristics were evaluated in the field and in Sentinel-2 satellite observations. Field data correlated well with satellite data, with an R2 of 0.91, 0.96, and 0.85 for LAI, fCOVER, and CCC, respectively. The application of nitrogen in all its doses produced significantly higher yields than the control. The LAI and CCC variables had a positive correlation with yield in the months of November and December. A significant difference was observed between U250 (62 Mg ha-1) and the other treatments. The U500 dose led to a yield increase of 27% compared to U250, while the difference between U750 and U500 was 6%.

Prediction of Daily Ambient Temperature and Its Hourly Estimation Using Artificial Neural Networks in an Agrometeorological Station in Castile and León, Spain.

This study evaluates the predictive modeling of the daily ambient temperature (maximum, Tmax; average, Tave; and minimum, Tmin) and its hourly estimation (T0h, …, T23h) using artificial neural networks (ANNs) for agricultural applications. The data, 2004-2010, were used for training and 2011 for validation, recorded at the SIAR agrometeorological station of Mansilla Mayor (León). ANN models for daily prediction have three neurons in the output layer (Tmax(t + 1), Tave(t + 1), Tmin(t + 1)). Two models were evaluated: (1) with three entries (Tmax(t), Tave(t), Tmin(t)), and (2) adding the day of the year (J(t)). The inclusion of J(t) improves the predictions, with an RMSE for Tmax = 2.56, Tave = 1.65 and Tmin = 2.09 (°C), achieving better results than the classical statistical methods (typical year Tave = 3.64 °C; weighted moving mean Tmax = 2.76, Tave = 1.81 and Tmin = 2.52 (°C); linear regression Tave = 1.85 °C; and Fourier Tmax = 3.75, Tave = 2.67 and Tmin = 3.34 (°C)) for one year. The ANN models for hourly estimation have 24 neurons in the output layer (T0h(t), …, T23h(t)) corresponding to the mean hourly temperature. In this case, the inclusion of the day of the year (J(t)) does not significantly improve the estimations, with an RMSE = 1.25 °C, but it improves the results of the ASHRAE method, which obtains an RMSE = 2.36 °C for one week. The results obtained, with lower prediction errors than those achieved with the classical methods, confirm the interest in using the ANN models for predicting temperatures in agricultural applications.

Predator control of marine communities increases with temperature across 115 degrees of latitude.

Early naturalists suggested that predation intensity increases toward the tropics, affecting fundamental ecological and evolutionary processes by latitude, but empirical support is still limited. Several studies have measured consumption rates across latitude at large scales, with variable results. Moreover, how predation affects prey community composition at such geographic scales remains unknown. Using standardized experiments that spanned 115° of latitude, at 36 nearshore sites along both coasts of the Americas, we found that marine predators have both higher consumption rates and consistently stronger impacts on biomass and species composition of marine invertebrate communities in warmer tropical waters, likely owing to fish predators. Our results provide robust support for a temperature-dependent gradient in interaction strength and have potential implications for how marine ecosystems will respond to ocean warming.

The Role of microRNAs in Pulp Inflammation.

The dental pulp can be affected by thermal, physical, chemical, and bacterial phenomena that stimulate the inflammatory response. The pulp tissue produces an immunological, cellular, and vascular reaction in an attempt to defend itself and resolve the affected tissue. The expression of different microRNAs during pulp inflammation has been previously documented. MicroRNAs (miRNAs) are endogenous small molecules involved in the transcription of genes that regulate the immune system and the inflammatory response. They are present in cellular and physiological functions, as well as in the pathogenesis of human diseases, becoming potential biomarkers for diagnosis, prognosis, monitoring, and safety. Previous studies have evidenced the different roles played by miRNAs in proinflammatory, anti-inflammatory, and immunological phenomena in the dental pulp, highlighting specific key functions of pulp pathology. This systematized review aims to provide an understanding of the role of the different microRNAs detected in the pulp and their effects on the expression of the different target genes that are involved during pulp inflammation.

Urine, feces, and blood contamination of frozen and fresh tambaqui (Colossoma macropomum Cuvier, 1818) sperm.

Contamination of fish milt during collection can have an important effect on the quality of fresh and frozen samples. The aim of this study was to evaluate the effects of biological contaminants (urine, feces, and blood) on the sperm of Colossoma macropomum. After hormonal induction, contaminated and contaminant-free milt samples from thirteen males (6.48 ± 2.82 kg) were collected and frozen. The sperm motility was evaluated in fresh and frozen-thawed sperm. Membrane and DNA integrity and mitochondrial functionality were evaluated only in frozen samples. The results revealed lower motility for contaminated sperm in both fresh and frozen-thawed samples [urine (76.15 ± 19.38% and 8.08 ± 6.63%), feces (78.85 ± 26.07% and 1.67 ± 3.26%), and blood (79.62 ± 20.96% and 2.69 ± 4.39%), respectively] than for contaminant-free sperm (95.77 ± 6.07% and 40.00 ± 12.25%, respectively). Motility was different between contaminant-free (118.50 ± 52.08 s) and feces-contaminated (77.00 ± 42.54 s) fresh samples. However, in frozen samples, there was no difference in motility among the groups. The membrane integrity was lower in the contaminated (urine: 72.38 ± 15.55%, blood: 77.00 ± 11.50%, and feces: 68.00 ± 13.64%) than in the contaminant-free (91.46 ± 5.12%) sperm. DNA integrity and mitochondrial functionality were greater in the contaminant-free (82.85 ± 12.19% and 87.15 ± 9.01%, respectively) than in the feces-contaminated (93.38 ± 5.49% and 94.92 ± 6.73%, respectively) samples. C. macropomum sperm contaminated with urine, blood, or feces should not be used for cryopreservation, as these contaminants have detrimental effects on sperm quality.

The genus Rickettsia in Mexico: Current knowledge and perspectives.

The genus Rickettsia encompasses 35 valid species of intracellular, coccobacilli bacteria that can infect several eukaryotic taxa, causing multiple emerging and re-emerging diseases worldwide. This work aimed to gather and summarise the current knowledge about the genus Rickettsia in Mexico, updating the taxonomy of the bacteria and their hosts by including all the records available until 2020, to elucidate host-parasite relationships and determine the geographical distribution of each Rickettsia species present in the country. Until now, 14 species of Rickettsia belonging to four groups have been recorded in Mexico. These species have been associated with 26 arthropod species (14 hard ticks, three soft ticks, two sucking lice, and seven fleas) and 17 mammal species distributed over 30 states in Mexico. This work highlights the high biological inventory of rickettsias for Mexico and reinforces the need to approach the study of this group from a One Health perspective.

Usefulness of a Point-of-Care Analyzer to Measure Cardiac Troponin I and D-Dimer Concentrations in Critically Ill Horses With Gastrointestinal Diseases.

Point-of-care (POC) systems for the joint measurement of Troponin and D-dimers have not been studied in horses. The aim of this study was to perform the validation of a POC system (AQT90 FLEX) for the measurement of cardiac troponin I (cTnI) and D-dimers in the serum of horses with gastrointestinal diseases. The main objective was to evaluate whether or not this system can distinguish healthy animals from diseased animals. A sample of 33 horses was included in the study: control group (n = 10) and horses with gastrointestinal disorders (n = 21), which were classified according to their outcome in survivors (subgroup A = 9) and nonsurvivors (subgroup B = 12). Considering the diagnosis of the process, ill horses were classified into three groups: inflammatory (I = 7), obstructive (O = 9), and strangulating diseases (S = 5). The clinical usefulness of AQT90 FLEX was validated by the study of linearity, coefficient of variation, and detection limits. Later, concentrations of D-dimers and cTnI were measured. A significant increase in both parameters was detected in ill animals (cTnI: control: 0.014 ± 0.01 µg/mL, survivors: 0.27 ± 0.37 µg/mL, nonsurvivors: 0.60 ± 1.21 µg/mL; D-dimers: control: 104.90 ± 30.82 ng/mL, survivors: 1,217.22 ± 1,213.28 ng/mL, nonsurvivors: 1,613.67 ± 1,426.75 ng/mL), although there were no statistically significant differences in concentrations according to diagnosis and outcome. In conclusion, AQT90 FLEX POC analyzer can be used in horses with gastrointestinal diseases to measure cTnI and D-dimer concentrations. It is a quick, practical, and minimally invasive tool that helps in determining the severity of illness.

A New Multiparameter Model for Multiaxial Fatigue Life Prediction of Rubber Materials.

Most of the mechanical components manufactured in rubber materials experience fluctuating loads, which cause material fatigue, significantly reducing their life. Different models have been used to approach this problem. However, most of them just provide life prediction only valid for each of the specific studied material and type of specimen used for the experimental testing. This work focuses on the development of a new generalized model of multiaxial fatigue for rubber materials, introducing a multiparameter variable to improve fatigue life prediction by considering simultaneously relevant information concerning stresses, strains, and strain energies. The model is verified through its correlation with several published fatigue tests for different rubber materials. The proposed model has been compared with more than 20 different parameters used in the specialized literature, calculating the value of the R2 coefficient by comparing the predicted values of every model, with the experimental ones. The obtained results show a significant improvement in the fatigue life prediction. The proposed model does not aim to be a universal and definitive approach for elastomer fatigue, but it provides a reliable general tool that can be used for processing data obtained from experimental tests carried out under different conditions.

Unbiased Assessment of Abundance of Rhipicephalus sanguineus sensu lato Ticks, Canine Exposure to Spotted Fever Group Rickettsia, and Risk Factors in Mexicali, México.

An epidemic of Rocky Mountain spotted fever (RMSF) is ongoing in Mexicali, México. We visited 100 neighborhoods with diagnosed human cases and 100 control neighborhoods to evaluate knowledge of the epidemic; obtain data on the spatial distribution of dogs, canine seroprevalence and active infection, tick infestations, and presence of rickettsial DNA in ticks; and evaluate risk factors for human cases, seropositivity, and tick infestation within an unbiased study design. The majority (80%) of residents had heard of RMSF, but only 48% used acaricides in the home or on dogs. Case neighborhoods and those with high canine seroprevalence tended to be on the city periphery or in the agricultural valley. No dogs were polymerase chain reaction (PCR) positive for Rickettsia rickettsii, and the overall seroprevalence was 65% (titers from 64 to 1,024). PCR prevalence in ticks was 0.70%, confirmed by DNA sequencing as R. rickettsii; neighborhood prevalence ranged from 0.7% to 6.1%. Twelve percent of dogs had high tick burdens, and all ticks were Rhipicephalus sanguineus. Epidemiologically significant risk factors were ground covering for a neighborhood having a human case; dogs having poor body condition and weighing < 10 kg for canine seropositivity; dogs living at the home for the number of ticks in the environment; and being near canals, having trash on the patio, and a dog being thin for tick burdens on dogs. A One Health approach is crucial to understanding RMSF and brown dog ticks.