The Effects of Microcrystalline Cellulose Addition on the Properties of Wood-PLA Filaments for 3D Printing.

This paper describes the use of microcrystalline cellulose (MCC) as an additive in wood-polylactic acid (PLA) filaments suitable for 3D printing. Filaments prepared with PLA, thermally modified (TM) wood, and three different MCC loadings (1, 3, and 5 wt%) by two-step melt blending in the extruder were characterized with respect to their rheological, thermal, and mechanical response. The analyses demonstrate that a low MCC content (1%) improves the mobility of the polymer chains and contributes to a higher elasticity of the matrix chain, a higher crystallinity, a lower glass transition temperature (by 1.66 °C), and a lower melting temperature (by 1.31 °C) and leads to a higher tensile strength (1.2%) and a higher modulus of elasticity (12.1%). Higher MCC loading hinders the mobility of the polymer matrix and leads to a rearrangement of the crystal lattice structure, resulting in a decrease in crystallinity. Scanning electron micrographs show that the cellulose is well distributed and dispersed in the PLA matrix, with some agglomeration occurring at higher MCC levels. The main objective of this study was to develop and evaluate a filament containing an optimal amount of MCC to improve compatibility between wood and PLA, optimize melt processability, and improve mechanical properties. It can be concluded that a 1% addition of MCC favorably changes the properties of the wood-PLA filaments, while a higher MCC content does not have this effect.

Correlating mechanical and rheological filament properties to processability and quality of 3D printed tablets using multiple linear regression.

Filament formulation for FDM is a challenging and time-consuming process. Several pharmaceutical polymers are not feedable on their own. Due to inadequate filament formulation, 3D printed tablets can also exhibit poor uniformity of tablet attributes. To better understand filament formulation process, 23 filaments were prepared with the polymer mixing approach. To yield processable filaments, brittle and pliable polymers were combined. A 20 % addition of a pliable polymer to a brittle one resulted in filament processability and vice versa. Predictive statistical models for filament processability and uniformity of tablet attributes were established based on the mechanical and rheological properties of filaments. 15 input variables were correlated to 9 responses, which represent filament processability and tablet properties, by using multiple linear regression approach. Filament stiffness, assessed by indentation, and its square term were the only variables that determined the filament's feedability. However, the resulting model is equipment-specific since different feeding mechanism exert different forces on the filaments. Additional models with good predictive power (R2pred > 0.50) were established for tablet width uniformity, drug release uniformity, tablet disintegration time uniformity and occurrence of disintegration, which are equipment-independent outputs. Therefore, the obtained model outcomes could be used in other research endeavours.

Pseudomonas fragi biofilm on stainless steel (at low temperatures) affects the survival of Campylobacter jejuni and Listeria monocytogenes and their control by a polymer molybdenum oxide nanocomposite coating.

Pseudomonas spp. are widely distributed bacteria on surfaces in the food production and processing environment, where they form extracellular polymeric substance rich biofilms that interact with other bacteria. In this study, the influence of biofilm of Pseudomonas fragi ATCC 4973 on Listeria monocytogenes ATCC 19115 and Campylobacter jejuni NCTC 11168 was investigated at 5 °C and 15 °C on stainless steel in broth and food homogenates (fish or chicken meat). Stainless steel was then coated with PVDF-HFP/PVP/MoO3 nanocomposite and examined for surface changes (scanning electron microscope, static contact angle, Vickers hardness and elastic modulus). The effect of the prepared nanocomposite coating on P. fragi and on L. monocytogenes and C. jejuni was evaluated in mono- and co-culture. P. fragi produced more biofilm at 15 °C than at 5 °C, especially when food homogenates were used as growth media. Co-cultivation with pathogens did not affect biofilm production by P. fragi, but significant changes were observed in L. monocytogenes and C. jejuni, resulting in a decrease and increase, respectively, in the determined number of culturable biofilm cells. The first change was probably due to competition for the surface, and the second to the oxygen gradient. Stainless steel was then coated with a PVDF-HFP/PVP/MoO3 nanocomposite, which was characterised by lower roughness and higher wettability, but lower hardness compared to uncoated stainless steel. The prepared nanocoating showed bactericidal activity when tested in phosphate buffered saline. When used in food homogenates, a reduction of over 95 % in bacterial counts was observed. An abundant biofilm of P. fragi proved protective to L. monocytogenes and C. jejuni against the functionalised nanocomposite surface when tested in food homogenates. The control of spoilage Pseudomonas spp., which are common in the food production and processing environment, is important for reducing the contamination of food with spoilage bacteria and with pathogens such as L. monocytogenes and C. jejuni, which may be present in the same environment. The PVDF-HFP/PVP/MoO3 nanocomposite showed good potential for use as a coating for food contact surfaces, but possible migration of nanoparticles from the nanocomposite coating to food should be evaluated before its commercial use.

Size- and Time-Dependent Particle Removal Efficiency of Face Masks and Improvised Respiratory Protection Equipment Used during the COVID-19 Pandemic.

Size- and time-dependent particle removal efficiency (PRE) of different protective respiratory masks were determined using a standard aerosol powder with the size of particles in the range of an uncoated SARS-CoV-2 virus and small respiratory droplets. Number concentration of particles was measured by a scanning mobility particle sizer. Respiratory protective half-masks, surgical masks, and cotton washable masks were tested. The results show high filtration efficiency of FFP2, FFP3, and certified surgical masks for all sizes of tested particles, while protection efficiency of washable masks depends on their constituent fabrics. Measurements showed decreasing PRE of all masks over time due to transmission of nanoparticles through the mask-face interface. On the other hand, the PRE of the fabric is governed by deposition of the aerosols, consequently increasing the PRE.