CMOS-compatible electro-optical SRAM cavity device based on negative differential resistance.

The impending collapse of Moore-like growth of computational power has spurred the development of alternative computing architectures, such as optical or electro-optical computing. However, many of the current demonstrations in literature are not compatible with the dominant complementary metal-oxide semiconductor (CMOS) technology used in large-scale manufacturing today. Here, inspired by the famous Esaki diode demonstrating negative differential resistance (NDR), we show a fully CMOS-compatible electro-optical memory device, based on a new type of NDR diode. This new diode is based on a horizontal PN junction in silicon with a unique layout providing the NDR feature, and we show how it can easily be implemented into a photonic micro-ring resonator to enable a bistable device with a fully optical readout in the telecom regime. Our result is an important stepping stone on the way to new nonlinear electro-optic and neuromorphic computing structures based on this new NDR diode.

Broadband electro-optic polarization conversion with atomically thin black phosphorus.

Active polarization control is highly desirable in photonic systems but has been limited mostly to discrete structures in bulky dielectric media and liquid crystal­based variable retarders. Here, we report electrically reconfigurable polarization conversion across telecommunication wavelengths (1410 to 1575 nanometers) in van der Waals layered materials using tri-layer black phosphorus (TLBP) integrated in a Fabry-Pérot cavity. The large electrical tunability of birefringence in TLBP enables spectrally broadband polarization control. We found that polarization states could be generated over a large fraction of the Poincaré sphere through spectral tuning, and that electrical tuning enables the state of polarization conversion to span nearly half the Poincaré sphere. We observed both linear to circular and cross-polarization conversion with voltage, demonstrating versatility with a high dynamic range.

Tunable intraband optical conductivity and polarization-dependent epsilon-near-zero behavior in black phosphorus.

Black phosphorus (BP) offers considerable promise for infrared and visible photonics. Efficient tuning of the bandgap and higher subbands in BP by modulation of the Fermi level or application of vertical electric fields has been previously demonstrated, allowing electrical control of its above-bandgap optical properties. Here, we report modulation of the optical conductivity below the bandgap (5 to 15 µm) by tuning the charge density in a two-dimensional electron gas induced in BP, thereby modifying its free carrier-dominated intraband response. With a moderate doping density of 7 × 1012 cm-2, we were able to observe a polarization-dependent epsilon-near-zero behavior in the dielectric permittivity of BP. The intraband polarization sensitivity is intimately linked to the difference in effective fermionic masses along the two crystallographic directions, as confirmed by our measurements. Our results suggest the potential of multilayer BP to allow new optical functions for emerging photonics applications.

Array-Level Inverse Design of Beam Steering Active Metasurfaces.

We report an array-level inverse design approach to optimize the beam steering performance of active metasurfaces, thus overcoming the limitations posed by nonideal metasurface phase and amplitude tuning. In contrast to device-level topology optimization of passive metasurfaces, the outlined system-level optimization framework relies on the electrical tunability of geometrically identical nanoantennas, enabling the design of active antenna arrays with variable spatial phase and amplitude profiles. Based on this method, we demonstrate high-directivity, continuous beam steering up to 70° for phased arrays with realistic tunable antenna designs, despite nonidealities such as strong covariation of scattered light amplitude with phase. Nonintuitive array phase and amplitude profiles further facilitate beam steering with a phase modulation range as low as 180°. Furthermore, we use the device geometries presented in this work for experimental validation of the system-level inverse design approach of active beam steering metasurfaces. The proposed method offers a framework to optimize nanophotonic structures at the array level that is potentially applicable to a wide variety of objective functions and actively tunable metasurface antenna array platforms.

Role of surface passivation in integrated sub-bandgap silicon photodetection.

We study experimentally the effect of oxide removal on the sub-bandgap photodetection in silicon waveguides at the telecom wavelength regime. Depassivating the device allows for the enhancement of the quantum efficiency by about 2-3 times. Furthermore, the propagation loss within the device is significantly reduced by the oxide removal. Measuring the device 60 days after the depassivation shows slight differences. We provide a possible explanation for these observations. Clearly, passivation and depassivation play an essential role in the design and the implementation of such sub-bandgap photodetector devices for applications such as on-chip light monitoring.

Dynamic beam steering with all-dielectric electro-optic III-V multiple-quantum-well metasurfaces.

Tunable metasurfaces enable dynamical control of the key constitutive properties of light at a subwavelength scale. To date, electrically tunable metasurfaces at near-infrared wavelengths have been realized using free carrier modulation, and switching of thermo-optical, liquid crystal and phase change media. However, the highest performance and lowest loss discrete optoelectronic modulators exploit the electro-optic effect in multiple-quantum-well heterostructures. Here, we report an all-dielectric active metasurface based on electro-optically tunable III-V multiple-quantum-wells patterned into subwavelength elements that each supports a hybrid Mie-guided mode resonance. The quantum-confined Stark effect actively modulates this volumetric hybrid resonance, and we observe a relative reflectance modulation of 270% and a phase shift from 0° to ~70°. Additionally, we demonstrate beam steering by applying an electrical bias to each element to actively change the metasurface period, an approach that can also realize tunable metalenses, active polarizers, and flat spatial light modulators.

Magnetically Controlled Atomic-Plasmonic Fano Resonances.

Following the efforts of size reduction and the integration of light and vapor systems, great promise is held in the integration of vapor and confined electromagnetic waves. By confining light to nanoscale dimensions, fundamental properties of light-vapor interactions may vary significantly. For example, the state of polarization may be modified as compared with weakly focused beams. Specifically, in transverse magnetic modes, the existence of a longitudinal field component, which is in quadrature to the transverse field, generates a "circular-like" polarized light. Here, by taking advantage of this very property, we study the interaction of confined light and vapor in a coupled system of plasmons and atomic vapors in the presence of magnetic fields. Our results show that the spectroscopic nature and Fano resonances of the hybrid plasmonic-atomic system are greatly altered. In parallel, we also exploit the existence of the atoms in proximity to the plasmonic mode to probe the polarization state of the electromagnetic field and reveal the longitudinal-to-transverse ratio between the plasmonic modes components in the near field. Interestingly, our system maps the amplitude and phase information of the electromagnetic modes to the spectral domain. As such, combining magnetic fields with the coupled plasmonic-atomic system has the potential for future applications in high spatial resolution magnetometry, near-field vectorial imaging, and magnetically induced switching and tuning.

Direct observation of optical near field in nanophotonics devices at the nanoscale using Scanning Thermal Microscopy.

In recent years, following the miniaturization and integration of passive and active nanophotonic devices, thermal characterization of such devices at the nanoscale is becoming a task of crucial importance. The Scanning Thermal Microscopy (SThM) is a natural candidate for performing this task. However, it turns out that the SThM capability to precisely map the temperature of a photonic sample in the presence of light interacting with the sample is limited. This is because of the significant absorption of light by the SThM probe. As a result, the temperature of the SThM probe increases and a significant electrical signal which is directly proportional to the light intensity is obtained. As such, instead of measuring the temperature of the sample, one may directly measure the light intensity profile. While this is certainly a limitation in the context of thermal characterization of nanophotonic devices, this very property provides a new opportunity for optical near field characterization. In this paper we demonstrate numerically and experimentally the optical near field measurements of nanophotonic devices using a SThM probe. The system is characterized using several sets of samples with different properties and various wavelengths of operation. Our measurements indicate that the light absorption by the probe can be even larger than the light induced heat generation in the sample. The frequency response of the SThM system is characterized and the 3 dB frequency response was found to be ~1.5 kHz. The simplicity of the SThM system which eliminates the need for complex optical measurement setups together with its broadband wavelength of operation makes this approach an attractive alternative to the more conventional aperture and apertureless NSOM approaches. Finally, referring to its original role in characterizing thermal effects at the nanoscale, we propose an approach for characterizing the temperature profile of nanophotonic devices which are heated by light absorption within the device. This is achieved by spatially separating between the optical near field distribution and the SThM probe, taking advantage of the broader temperature profile as compared to the more localized light profile.

Black metal thin films by deposition on dielectric antireflective moth-eye nanostructures.

Although metals are commonly shiny and highly reflective, we here show that thin metal films appear black when deposited on a dielectric with antireflective moth-eye nanostructures. The nanostructures were tapered and close-packed, with heights in the range 300-600 nm, and a lateral, spatial frequency in the range 5-7 µm(-1). A reflectance in the visible spectrum as low as 6%, and an absorbance of 90% was observed for an Al film of 100 nm thickness. Corresponding experiments on a planar film yielded 80% reflectance and 20% absorbance. The observed absorbance enhancement is attributed to a gradient effect causing the metal film to be antireflective, analogous to the mechanism in dielectrics and semiconductors. We find that the investigated nanostructures have too large spatial frequency to facilitate efficient coupling to the otherwise non-radiating surface plasmons. Applications for decoration and displays are discussed.

Fano resonances and all-optical switching in a resonantly coupled plasmonic-atomic system.

The possibility of combining atomic and plasmonic resonances opens new avenues for tailoring the spectral properties of materials. Following the rapid progress in the field of plasmonics, it is now possible to confine light to unprecedented nanometre dimensions, enhancing light-matter interactions at the nanoscale. However, the resonant coupling between the relatively broad plasmonic resonance and the ultra-narrow fundamental atomic line remains challenging. Here we demonstrate a resonantly coupled plasmonic-atomic platform consisting of a surface plasmon resonance and rubidium ((85)Rb) atomic vapour. Taking advantage of the Fano interplay between the atomic and plasmonic resonances, we are able to control the lineshape and the dispersion of this hybrid system. Furthermore, by exploiting the plasmonic enhancement of light-matter interactions, we demonstrate all-optical control of the Fano resonance by introducing an additional pump beam.

Plasmonic metasurfaces for coloration of plastic consumer products.

We present reflective plasmonic colors based on the concept of localized surface plasmon resonances (LSPR) for plastic consumer products. In particular, we bridge the widely existing technological gap between clean-room fabricated plasmonic metasurfaces and the practical call for large-area structurally colored plastic surfaces robust to daily life handling. We utilize the hybridization between LSPR modes in aluminum nanodisks and nanoholes to design and fabricate bright angle-insensitive colors that may be tuned across the entire visible spectrum.

Near- and far-field properties of plasmonic oligomers under radially and azimuthally polarized light excitation.

We present a comprehensive experimental and theoretical study on the near- and far-field properties of plasmonic oligomers using radially and azimuthally polarized excitation. These unconventional polarization states are perfectly matched to the high spatial symmetry of the oligomers and thus allow for the excitation of some of the highly symmetric eigenmodes of the structures, which cannot be excited by linearly polarized light. In particular, we study hexamer and heptamer structures and strikingly find very similar optical responses, as well as the absence of a Fano resonance. Furthermore, we investigate the near-field distributions of the oligomers using near-field scanning optical microscopy (NSOM). We observe significantly enhanced near-fields, which arise from efficient excitation of the highly symmetric eigenmodes by the radially and azimuthally polarized light fields. Our study opens up possibilities for tailored light-matter interaction, combining the design freedom of complex plasmonic structures with the remarkable properties of radially and azimuthally polarized light fields.

Subwavelength plasmonics for graded-index optics on a chip.

Planar plasmonic devices are becoming attractive for myriad applications, owing to their potential compatibility with standard microelectronics technology and the capability for densely integrating a large variety of plasmonic devices on a chip. Mitigating the challenges of using plasmonics in on-chip configurations requires precise control over the properties of plasmonic modes, in particular their shape and size. Here we achieve this goal by demonstrating a planar plasmonic graded-index lens focusing surface plasmons propagating along the device. The plasmonic mode is manipulated by carving subwavelength features into a dielectric layer positioned on top of a uniform metal film, allowing the local effective index of the plasmonic mode to be controlled using a single binary lithographic step. Focusing and divergence of surface plasmons is demonstrated experimentally. The demonstrated approach can be used for manipulating the propagation of surface plasmons, e.g., for beam steering, splitting, cloaking, mode matching, and beam shaping applications.

High resolution direct measurement of temperature distribution in silicon nanophotonics devices.

Following the miniaturization of photonic devices and the increase in data rates, the issues of self heating and heat removal in active nanophotonic devices should be considered and studied in more details. In this paper we use the approach of Scanning Thermal Microscopy (SThM) to obtain an image of the temperature field of a silicon micro ring resonator with sub-micron spatial resolution. The temperature rise in the device is a result of self heating which is caused by free carrier absorption in the doped silicon. The temperature is measured locally and directly using a temperature sensitive AFM probe. We show that this local temperature measurement is feasible in the photonic device despite the perturbation that is introduced by the probe. Using the above method we observed a significant self heating of about 10 degrees within the device.

Light transmission through a circular metallic grating under broadband radial and azimuthal polarization illumination.

We studied the characteristics of a circular metallic grating illuminated by broadband radial and azimuthal polarizations. We demonstrated that this scenario is the cylindrical analogue of a one-dimensional Cartesian grating illuminated by TM and TE polarizations. We measured the transmission spectra of this structure and observed strong polarization selectivity and, specifically, a resonance for radial polarization excitation, indicating a strong coupling to surface plasmons. The structure may be attractive for applications where pure radial polarization is needed, such as tight focusing, material processing, and particle trapping.