Protein self-modification by heme-generated reactive species.

In the presence of H(2)O(2), heme proteins form active intermediates, which are able to oxidize exogenous molecules. Often these products are not stable compounds but reactive species on their own, such as organic radicals. They can both diffuse to the bulk of the solution or react with the protein that generated them. Here, we describe the self-modification underwent by heme proteins with globin-type fold, that is, myoglobin, hemoglobin, and neuroglobin when treated with NO(2) (-) or catechols in the presence of H(2)O(2). The reactive nitrogen species generated by NO(2) (-) give rise to nitration, oxidation, and/or crosslinking reactions between the proteins or their subunits. The quinones formed upon reaction with catechols easily modify Cys and His residues and eventually cause protein aggregation, which induces precipitation. The pattern of modifications undergone by the protein strongly depends on the nature of the protein and the reaction conditions.

Tyrosinase-generated quinones induce covalent modification, unfolding, and aggregation of human holo-myoglobin.

The present study describes the pattern of protein modification undergone by human holo-myoglobin by reactive fluoroquinones enzymatically produced by oxidation of 3-fluorophenol in mild conditions (pH 7.4, 25 degrees C). The fluoroquinones react with a number of histidine residues. Surface residues H24, H36, H48, and H82 and the heme distal histidine H64 were all found to be modified to a significant extent. In contrast, cysteine C110 is not appreciably affected, possibly because it is not accessible to the fluoroquinones. The sites of protein modification were assessed by mass spectrometry analysis of the peptide fragments resulting from controlled proteolysis of the apoprotein. As a consequence of the reaction with quinones, the globular structure of myoglobin becomes more prone to denaturation by the partial loss of its secondary structure. As a more intriguing consequence, the fluoroquinones promote the formation of structured aggregates of moderate size that lack the typical morphology of fibrillar structures.

Synthetic chrysotile nanocrystals as a reference standard to investigate surface-induced serum albumin structural modifications.

Geoinspired synthetic chrysotile, which represents an ideal asbestos reference standard, has been utilized to investigate homomolecular exchange of bovine serum albumin (BSA), the major plasma protein, between the adsorbed and dissolved state at the interface between asbestos fibers and biological medium. FTIR spectroscopy has been used to quantify BSA structural modifications due to surface adhesion on chrysotile fibers as a function of the surface coating extent. Circular dichroism spectroscopy has been used to investigate the adsorption/desorption equilibrium through analysis of the BSA structural perturbations after protein desorption from chrysotile surface. Data results show clearly that in the solid state BSA modifications are driven by surface interaction with the substrate, following a bimodal adsorption evidenced by two different binding constants. On the other hand, BSA desorbed in solution is able to rearrange, in the lack of substrate, although keeping irreversible modifications with respect to the native species. The lack of regaining its native structure certainly affects albumin interaction with biological environment. The present investigation on the stoichiometric synthetic geoinspired chrysotile nanocrystals is the first approach toward a deeper attempt to use standard synthetic chrysotile reference samples in mimicking the behavior of asbestos fibers and allows to better understand their interaction with a biological environment.

Mechanistic insight into the activity of tyrosinase from variable-temperature studies in an aqueous/organic solvent.

The activity of mushroom tyrosinase towards a representative series of phenolic and diphenolic substrates structurally related to tyrosine has been investigated in a mixed solvent of 34.4% methanol-glycerol (7:1, v/v) and 65.6% (v/v) aqueous 50 mM Hepes buffer at pH 6.8 at various temperatures. The kinetic activation parameters controlling the enzymatic reactions and the thermodynamic parameters associated with the process of substrate binding to the enzyme active species have been deduced from the temperature variation of the kcat and KM parameters. The activation free energy is dominated by the enthalpic term, the value of which lies in the relatively narrow range of 61+/-9 kJ mol(-1) irrespective of substrate or reaction type (monophenolase or diphenolase). The activation entropies are small and generally negative and contribute no more than 10% to the activation free energy. The substrate binding parameters are characterized by large and negative enthalpy and entropy contributions, which are typically dictated by polar protein-substrate interactions. The substrate 4-hydroxyphenylpropionic acid exhibits a strikingly anomalous temperature dependence of the enzymatic oxidation rate, with deltaH(double dagger) approximately = 150 kJ mol(-1) and deltaS(double dagger) approximately = 280 J K(-1) mol(-1), due to the fact that it can competitively bind to the enzyme through the phenol group, like the other substrates, or the carboxylate group, like carboxylic acid inhibitors. A kinetic model that takes into account the dual substrate/inhibitor nature of this compound enables rationalization of this anomalous behavior.

Hydroxylation of phenolic compounds by a peroxodicopper(II) complex: further insight into the mechanism of tyrosinase.

The dicopper(I) complex [Cu2(MeL66)]2+ (where MeL66 is the hexadentate ligand 3,5-bis-{bis-[2-(1-methyl-1H-benzimidazol-2-yl)-ethyl]-amino}-meth ylbenzene) reacts reversibly with dioxygen at low temperature to form a mu-peroxo adduct. Kinetic studies of O2 binding carried out in acetone in the temperature range from -80 to -55 degrees C yielded the activation parameters DeltaH1(not equal) = 40.4 +/- 2.2 kJ mol(-1), DeltaS1)(not equal) = -41.4 +/- 10.8 J K(-1) mol(-1) and DeltaH(-1)(not equal) = 72.5 +/- 2.4 kJ mol(-1), DeltaS(-1)(not equal) = 46.7 +/- 11.1 J K(-1) mol(-1) for the forward and reverse reaction, respectively, and the binding parameters of O2 DeltaH degrees = -32.2 +/- 2.2 kJ mol(-1) and DeltaS degrees = -88.1 +/- 10.7 J K(-1) mol(-1). The hydroxylation of a series of p-substituted phenolate salts by [Cu2(MeL66)O2]2+ studied in acetone at -55 degrees C indicates that the reaction occurs with an electrophilic aromatic substitution mechanism, with a Hammett constant rho = -1.84. The temperature dependence of the phenol hydroxylation was studied between -84 and -70 degrees C for a range of sodium p-cyanophenolate concentrations. The rate plots were hyperbolic and enabled to derive the activation parameters for the monophenolase reaction DeltaH(not equal)ox = 29.1 +/- 3.0 kJ mol(-1), DeltaS(not equal)ox = -115 +/- 15 J K(-1) mol(-1), and the binding parameters of the phenolate to the mu-peroxo species DeltaH degrees(b) = -8.1 +/- 1.2 kJ mol(-1) and DeltaS degrees(b) = -8.9 +/- 6.2 J K(-1) mol(-1). Thus, the complete set of kinetic and thermodynamic parameters for the two separate steps of O2 binding and phenol hydroxylation have been obtained for [Cu2(MeL66)]2+.

Mechanistic insight into the catechol oxidase activity by a biomimetic dinuclear copper complex.

The biomimetic catalytic oxidation of 3,5-di- tert-butylcatechol by the dicopper(II) complex of the ligand alpha,alpha'-bis(bis[1-(1'-methyl-2'-benzimidazolyl)methyl]amino)- m-xylene in the presence of dioxygen has been investigated as a function of temperature and pH in a mixed aqueous/organic solvent. The catalytic cycle occurs in two steps, the first step being faster than the second step. In the first step, one molecule of catechol is oxidized by the dicopper(II) complex, and the copper(II) centers are reduced. From the pH dependence, it is deduced that the active species of the process is the monohydroxo form of the dinuclear complex. In the second step, the second molecule of catechol is oxidized by the dicopper(I)-dioxygen complex formed upon oxygenation of the reduced complex. In both cases, catechol oxidation is an inner-sphere electron transfer process involving binding of the catechol to the active species. The binary catechol-dicopper(II) complex formed in the first step could be characterized at very low temperature (-90 degrees C), where substrate oxidation is blocked. On the contrary, the ternary complex of dicopper(I)-O(2)-catechol relevant to the second step does not accumulate in solution and could not be characterized, even at low temperature. The investigation of the biphasic kinetics of the catalytic reaction over a range of temperatures allowed the thermodynamic (Delta H degrees and Delta S degrees ) and activation parameters (Delta H( not equal) and Delta S( not equal)) connected with the key steps of the catecholase process to be obtained.

New aspects of the reactivity of tyrosinase.

Tyrosinase was found to be active in the sulfoxidation of thioanisol, producing the (R)-sulfoxide with high enantiomeric excess. The activity of the enzyme with phenolic and diphenolic substrates in a mixed aqueous Hepes buffer pH 6.8-methanol-glycerol solvent was also investigated over a range of temperatures. These experiments enabled us to deduce the thermodynamic parameters associated with substrate binding to the enzyme and the activation parameters associated with the rate determining step of the enzymatic reaction.