Analysis of effects and factors linked to soil microbial populations and nitrogen cycling under long-term biosolids application.

Information about impacts of long-term biosolids application on soil microbial populations and functional groups and N cycling is important for evaluating soil health and agroecosystem sustainability under long-term biosolids application. Mine spoil plots received annual biosolids application from 1973 to 2010 at low (16.8 Mg ha-1 yr-1), medium (33.6 Mg ha-1 yr-1), and high rates (67.2 Mg ha-1 yr-1). A no-biosolids control received chemical fertilizer at the agronomic rate. Soil samples were collected in three seasons per year spanning 2003-2005 for measuring soil moisture, pH, soil organic C (SOC), total and extractable heavy metals (Cd, Cu, Ni, Zn), NO3-, N mineralization potential (NMP), microbial biomass C (MBC), and populations of three N-cycling bacteria (NCB) groups: ammonia-oxidizing bacteria (AOB), nitrite-oxidizing bacteria (NOB), and denitrifying bacteria (DNB). Soil samples were collected again in 2008 and 2010 for quantifying total and extractable heavy metals, and in 2018 (eight years after biosolids applications ended) for measuring SOC, MBC, NMP, and microbial respiration. During 2003-2005, mean MBC was 315, 554, 794, and 1001 mg kg-1 in the control, low, medium, and high biosolids treatments, respectively. Populations of NCB did not differ among treatments. Biosolids application increased total and extractable metal concentrations but the effect of biosolids rates were much lower on extractable than total concentrations. Soil extractable Cd and Cu concentrations decreased from medium to high applications, likely due to complexing with biosolids organic matter. Partial least squares regression analysis identified a strong positive effect on MBC of SOC and a weak negative effect of Cu, explaining the strong net positive effect of biosolids on MBC. In 2018, the medium and high biosolids treatments maintained higher SOC, MBC, NMP, and microbial respiration than the control. This study provided further evidence that long-term biosolids application has positive effects on soil microbes that persist for years after ending application.

Phenotypic and Dermoscopic Patterns of Familial Melanocytic Lesions: A Pilot Study in a Third-Level Center.

Cutaneous melanoma is a highly aggressive skin cancer. It is estimated that 5% to 10% of the underlying mutations are hereditary and responsible for familial (or hereditary) melanoma. These patients are prone to the early development and higher risk of multiple melanomas. In recent years, an increasing number of genes have been identified thanks to genetic testing, allowing the subsequent surveillance of individuals at risk, yet it is still difficult to predict the presence of these mutations on a clinical basis. In this scenario, specific phenotypic and dermoscopic features could help clinicians in their identification. The aim of this work has been to correlate mutations to prevalent dermoscopic patterns, paving the way for reference models useful in clinical practice. In our cohort, out of 115 patients referred to genetic counseling for melanoma, 25 tested positive (21.7%) for critical mutations: CDKN2A (n = 12), MITF (n = 3), BAP1 (n = 1), MC1R (n = 3), PTEN (n = 1), TYR (n = 2), OCA2 (n = 1), and SLC45A2 (n = 2). The phenotype profiles obtained through the digital acquisition, analysis, and description of both benign and malignant pigmented lesions showed a predominance of the type II skin phenotype, with an elevated mean total nevus number (182 moles, range 75-390). As for dermoscopic features, specific mutation-related patterns were described in terms of pigmentation, areas of regression, and vascular structures. Although further studies with larger cohorts are needed, our work represents the beginning of a new approach to the study and diagnosis of familial melanoma, underlining the importance of clinical and dermoscopic patterns, which may constitute a reference model for each gene, enabling comparison.

Greening a Steel Mill Slag Brownfield with Biosolids and Sediments: A Case Study.

The former US Steel Corporation's South Works site in Chicago, IL, is a 230-ha bare brownfield consisting of steel mill slag fill materials that will need to be reclaimed to support and sustain vegetation. We conducted a case study to evaluate the suitability of biosolids and dredged sediments for capping the steel mill slag to establish good quality turfgrass vegetation. Eight study plots were established on a 0.4-ha parcel that received biosolids and dredged sediment blends of 0, 25, 50, or 100% biosolids (v/v). Turfgrass was successfully established and was thicker and greener in biosolids-amended sediments than in unamended sediments. Concentrations of N, P, K, and micronutrients in turfgrass tissues increased with increasing biosolids. Soil organic carbon, N, P, and micronutrients increased with increasing biosolids. Cadmium, Cu, Ni, and Zn concentrations in biosolids-amended sediments also increased with increasing biosolids but were far below phytotoxicity limits for turfgrass. Lead and Cr concentrations in biosolids-amended plots were comparable to concentrations in unamended sediments. Groundwater monitoring lysimeters and wells below the study site and near Lake Michigan were not affected by nutrients leaching from the amendments. Overall, the results from this case study demonstrated that blends of biosolids and dredged sediments could be successfully used for capping steel mill slag brownfield sites to establish good quality turfgrass vegetation.

In-situ infiltration performance of different permeable pavements in a employee used parking lot--A four-year study.

Permeable pavements are being adopted as a green solution in many parts of the world to manage urban stormwater quantity and quality. This paper reports on the measured in-situ infiltration performance over a four-year period since construction and use of three permeable parking sections (permeable pavers, permeable concrete and permeable asphalt) of an employee car parking lot. There was only a marginal decline in infiltration rates of all three pavements after one year of use. However, between years two to four, the infiltration rates declined significantly due to clogging of pores either by dry deposition of particles and/or shear stress of vehicles driving and degrading the permeable surfaces; during the last two years, a greater decline was also observed in driving areas of the parking lots compared to parking slots, where minimal wear and tear are expected. Maintenance strategies were employed to reclaim some of the lost infiltration rate of the permeable pavements to limited success. Despite this decline, the infiltration rates were still four to five times higher than average rainstorm intensity in the region. Thus, these permeable pavement parking lots may have significant ecological importance due to their ability to infiltrate rainwater quickly, reduce the runoff in the catchment area, and also dampen runoff peak flows that could otherwise enter the collection system for treatment in a combined sewer area.

Nitrogen mineralization from anaerobically digested centrifuge cake and aged air-dried biosolids.

This study was conducted to estimate nitrogen (N) mineralization of anaerobically digested centrifuge cake from the Stickney Water Reclamation Plant (SWRP) and Calumet Water Reclamation Plant (CWRP), lagoon-aged air-dried biosolids from the CWRP, and Milorganite at three rates of application (0, 12.5 and 25 Mg ha(-1)). The N mineralized varied among biosolids as follows: Milorganite (44%) > SWRP centrifuge cake (35%) > CWRP centrifuge cake (31%) > aged air-dried (13%). The N mineralized in the SWRP cake (32%) and CWRP aged air-dried biosolids (12%) determined from the 15N study were in agreement with the first study. The N mineralization value for centrifuge cake biosolids observed in our study is higher than the value given in the Part 503 rule and Illinois Part 391 guidelines. These results will be used to fine-tune biosolids application rate to match crop N demand without compromising yield while minimizing any adverse effect on the environment.

Enhanced stabilization of digested sludge during long-term storage in anaerobic lagoons.

The goal of this work was to study changes in anaerobically stored digested sludge under different lengths of storage time to evaluate the quality of final product biosolids. The analyses of collected data suggest the organic matter degradation occurrence in the anaerobic environment of the lagoon approximately within the first year. After that, the degradation becomes very slow, which is likely caused by unfavorable environmental conditions. The performance of lagoon aging of digested sludge was also compared to the performance of lagoon aging of anaerobically digested and dewatered sludge. It was concluded that both of these processes result in biosolids of comparative quality and that the former provides more economical solution to biosolids handling by eliminating the need for mechanical dewatering.

Improvements in biosolids quality resulting from the Clean Water Act.

Promulgation of the Clean Water Act (CWA) authorized the United States Environmental Protection Agency (U.S. EPA) to regulate quality standards for surface waters and establish regulations limiting the amounts and types of pollutants entering the nation's waters. U.S. EPA imposed national pretreatment standards on industrial wastes discharged to the collection systems of publicly owned treatment works (POTWs) and promulgated General Pretreatment Regulations in 1978. This study analyzed trace metals data from the National Sewage Sludge Surveys conducted by U.S. EPA and the American Metropolitan Sewage Agencies (AMSA) to evaluate the effect of implementation of the national industrial pretreatment standards on concentrations of trace metals in sludges generated by POTWs in the United States. The data showed that implementation of pretreatment programs has been highly effective in reducing the amount of pollutants that enter POTWs and has resulted in a substantial reduction in the levels of trace metals in the municipal sludges. Concentrations of chromium, lead, and nickel in sludge declined by 78, 73, and 63%, respectively, within a year after promulgation of General Pretreatment Regulations. Resulting from these measures, metal concentrations in the sludges generated by a majority of POTWs in the United States are sufficiently low that the sludges can be classified as biosolids and also meet the U.S. EPA's exceptional quality criteria for trace metals in biosolids. This improvement gives POTWs the option to use their biosolids beneficially through land application.

Effect of long-term application of biosolids for mine land reclamation on groundwater chemistry: nutrients and other selected qualities.

Leaching of nitrogen (N) and phosphorus (P) to groundwater can limit the land application of fertilizer, biosolids, and other soil amendments. Groundwater quality monitoring data collected over a 34-yr period at a 1790-ha site in Fulton County, Illinois, where strip-mined land was reclaimed with biosolids, were used to evaluate long-term impacts of biosolids on groundwater N, P, and other parameters. Seven strip-mined fields repeatedly treated with biosolids at 801 to 1815 Mg ha cumulative rate (equivalent to 24-55 dry Mg ha yr) between 1972 and 2004 were compared with another seven fields treated annually with chemical fertilizer at agronomic rates. Groundwater from wells installed in each of the fields and two public wells that served as background (reference) were sampled for 35 yr, monthly between 1972 and 1986 and quarterly between 1987 and 2006. Data show greater chloride (Cl), sulfate (SO) and electrical conductivity (EC) of groundwater from wells in biosolids fields than those in fertilizer fields. Also, groundwater nitrate N (NO-N) concentrations were greater in biosolids-amended fields than in fertilizer fields, but below regulatory limit of 10 mg L in Illinois Part 620 regulation. Conversely, groundwater P concentrations were consistently lower in biosolids than in chemical fertilizer wells throughout the 35-yr monitoring period. The study demonstrates that the repeated application of biosolids, even at higher than agronomic rate, would cause only minor nitrate increase and no P increase in groundwater.

Effects of long-term application of biosolids for mine land reclamation on groundwater chemistry: trace metals.

Data collected for 35 yr from a 1790-ha strip mine reclamation site in Fulton County, Illinois, where biosolids were applied from 1972 to 2004, were used to evaluate the impacts of long-term biosolids application on metal concentrations in groundwater. Groundwater samples were collected between 1972 and 2006 from wells installed in seven strip-mined fields treated with biosolids at cumulative loading rates of 801 to 1815 dry Mg ha and from another seven fields (also strip mined) treated with mineral fertilizer. Samples were collected monthly between 1972 and 1986 and quarterly between 1987 and 2004 and were analyzed for total metals. The concentrations of metals in groundwater were generally below regulatory limits. Lead, Cd, Cu, Cr, Ni, and Hg concentrations in groundwater were similar for the biosolids-amended and fertilizer-treated sites across all sampling intervals. Zinc concentration was increased by biosolids application only for samples collected before the 1993 promulgation of the USEPA 40 CFR Part 503 rule. Iron and Mn were the only metals that were consistently increased after biosolids application; however, Mn concentrations did not exceed the 10 mg L regulatory limits. Zinc, Cu, Cd, Pb, Fe, Al, and Mn concentrations in groundwater decreased with time, coupled with the change from pre-part 503 to post-Part 503 biosolids. The concentrations of other metals, including Ni, Cr, and Hg, did not increase in groundwater with the prolonged biosolids application. The study suggests that the long-term application of biosolids at high loading rates does not result in trace metal pollution of groundwater.

Anaerobic and aerobic transformations affecting stability of dewatered sludge during long-term storage in a lagoon.

The goal of this work was to study long-term behavior of anaerobically digested and dewatered sludge (biosolids) in a lagoon under anaerobic and aerobic conditions to determine the stability of the final product as an indicator of its odor potential. Field lagoons were sampled to estimate spatial and temporal variations in the physical-chemical properties and biological stability characteristics such as volatile solids content, accumulated oxygen uptake, and soluble protein content and odorous compound assessment. The analyses of collected data suggest that the surface layer of the lagoon (depth of above 0.15 m) undergoes long-term aerobic oxidation resulting in a higher degree of stabilization in the final product. The subsurface layers (depth 0.15 m below the surface and deeper) are subjected to an anaerobic environment where the conditions favor the initial rapid organic matter degradation within approximately the first year, followed by slow degradation.

Effect of ferric chloride addition and holding time on gravity belt thickening of waste activated sludge.

Phosphorus removal using ferric chloride (FeCl3) addition was demonstrated at the Egan Water Reclamation Plant. Concurrently, sludge thickening performance problems occurred in the gravity belt thickeners (GBTs). Blinding problems and polymer demand change were attributed to FeCl3 and long sludge holding times. Laboratory tests were conducted to gain insight to the GBT problems. Sludge holding time effects before polymer conditioning and thickening and prolonged contact of the solids with FeCl3 were evaluated via modified time-to-filter and blinding tests developed for this study. The tests assessed the sludge filterability under polymer and FeCl3 conditioning treatments and varying sludge holding and FeCl3 contact times. It was determined that fresh sludge was the easiest to thicken compared with sludge stored for any length of time. The FeCl3 improved thickening; however, when both the FeCl3 and polymer were used as conditioners, higher FeCl3 concentrations resulted in thickening inhibition compared with polymer alone.

Triclocarban, triclosan, polybrominated diphenyl ethers, and 4-nonylphenol in biosolids and in soil receiving 33-year biosolids application.

Land application of biosolids is a common practice throughout the world. However, concerns continue to be raised about the safety of this practice, because biosolids may contain trace levels of organic contaminants. The present study evaluated the levels of triclocarban (TCC), triclosan (TCS), 4-nonylphenol (4-NP), and polybrominated diphenyl ethers (PBDEs) in biosolids from 16 wastewater treatment plants and in soils from field plots receiving annual applications of biosolids for 33 years. All of the four contaminants evaluated were detected in most of the biosolids at concentrations ranging from hundreds of microg/kg to over 1,000 mg/kg (dry wt basis). They were detected at microg/kg levels in the biosolids-amended soil, but their concentrations decreased sharply with increasing soil depth for 4-NP, PBDEs, and TCC, indicating limited soil leaching of those compounds. However, potential leaching of TCS in the biosolids-amended soils was observed. The levels of all four compounds in the surface soil increased with increasing biosolids application rate. Compared with the estimated 33-year cumulative input to the soil during the 33-year consecutive biosolids application, most of the PBDEs and a small percentage of 4-NP, TCC, and TCS remained in the top 120-cm soil layer. These observations suggest slow degradation of PBDEs but rapid transformation of 4-NP, TCC, and TCS in the biosolids-amended soils.

A root exudates based approach to assess the long-term phytoavailability of metals in biosolids-amended soils.

Organic acids present in the rhizosphere of growing plants are widely recognized to be responsible for dissolving the solid phase metals in the soil and making them available for plant absorption. We proposed a root exudates-based model to assess the long-term phytoavailability of metals in biosolids-amended soils. The phytoavailability of biosolids-borne metals was defined in terms of a capacity factor and an intensity factor. The plant available metal pool, C(0) (capacity factor, mgkg(-1)), can be estimated by fitting the successive organic acids extraction data to an exponential decay kinetic equation. The field metal removal rate, k (intensity factor, yr(-1)), can be estimated from the successive extraction-based metal release rate through an effective annual organic acid production in the rhizosphere which was found to be characteristic of plant species. The protocol was successfully used to assess the long-term phytoavailability of metals in biosolids-amended soil from two biosolids land application sites.

Phytoavailability of cadmium in long-term biosolids-amended soils.

Agronomic use of biosolids has raised concern that plant availability of biosolids-Cd will increase with time after cessation of biosolids application. It has been demonstrated that chemical extractability of Cd is persistently decreased in biosolids-amended soils. This study was conducted to determine if Cd phytoavailability in long-term biosolids-amended soils was also persistently decreased. Paired control and biosolids-amended soils were collected from three experimental sites where large cumulative rates of biosolids were applied about 20 yr ago. The pH of all soils [in 0.01 mol L(-1) Ca(NO(3))(2)] was adjusted to 6.5 +/- 0.2. Increasing rates of Cd-nitrate (from 0 to 10.0 mg Cd kg(-1) soil) enriched in (111)Cd stable isotope were added to all soils, and Romaine lettuce (Lactuca sativa L. var. longifolia Lam.) was grown in pots to bioassay phytoavailable Cd. After harvest, Cd concentrations in shoots and labile pool of Cd (Cd(L)) in soils were determined. The relationship between added salt-Cd and Cd concentrations in lettuce shoots was linear for all soils tested. Ratios of (shoot Cd):(soil Cd) slopes were highest in the control soils. Biosolids amendment decreased (shoot Cd):(soil Cd) slopes to varied extent depending on biosolids source, properties, and application rate. The decrease in slope in comparison to the control was an indication of the lower phytoavailability of Cd in biosolids-amended soils. A significant negative correlation existed between Cd uptake slopes and soil organic matter, free and amorphous Fe and Al oxides, Bray-P, and soil and plant Zn. Biosolids-Cd was highly labile (%L 80-95) except for Fulton County soil (%L = 61).

Levels of dioxins in soil and corn tissues after 30 years of biosolids application.

Detectable levels of dioxins have been reported in biosolids, but very little information is available on the effect of long-term application of biosolids on dioxins accumulation in soil and uptake by plants. We analyzed dioxins in soil and corn tissue samples from field plots after 30 continuous applications of biosolids at 0 (Control), 16.8, and 67.2 Mg biosolids ha(-1) yr(-1) resulting in 0, 504, and 2016 Mg ha(-1) cumulative loadings of biosolids, respectively. The levels of dioxins in soil were only 79.9, 115.5, and 247.5 ng toxic equivalents (TEQs) kg(-1) in the 0, 504, and 2016 Mg biosolids ha(-1) plots, respectively. Dioxins were not detected in the corn grain, and only trace levels (6.8-7.5 ng TEQs kg(-1)) were found in the corn stover; however, these values were not statistically different between control and biosolids-amended soils. These observations suggest that although long-term application of biosolids may increase the levels of dioxins in soil, it does not affect dioxins uptake by corn.

Trace element concentrations in soil, corn leaves, and grain after cessation of biosolids applications.

From 1974 to 1984, 543 Mg ha(-1) of biosolids were applied to portions of a land-reclamation site in Fulton County, IL. Soil organic C increased to 5.1% then decreased significantly (p < 0.01) to 3.8% following cessation of biosolids applications (1985-1997). Metal concentrations in amended soils (1995-1997) were not significantly different (p > 0.05) (Ni and Zn) or were significantly lower (p < 0.05) (6.4% for Cd and 8.4% for Cu) than concentrations from 1985-1987. For the same biosolids-amended fields, metal concentrations in corn (Zea mays L.) either remained the same (p > 0.05, grain Cu and Zn) or decreased (p < 0.05, grain Cd and Ni, leaf Cd, Cu, Ni, Zn) for plants grown in 1995-1997 compared with plants grown immediately following termination of biosolids applications (1985-1987). Biosolids application increased (p < 0.05) Cd and Zn concentrations in grain compared with unamended fields (0.01 to 0.10 mg kg(-1) for Cd and 23 to 28 mg kg(-1) for Zn) but had no effect (p > 0.05) on grain Ni concentrations. Biosolids reduced (p < 0.05) Cu concentration in grain compared with grain from unamended fields (1.9 to 1.5 mg kg(-1)). Biosolids increased (p < 0.05) Cd, Ni, and Zn concentrations in leaves compared with unamended fields (0.3 to 5.6 mg kg(-1) for Cd, 0.2 to 0.5 mg kg(-1) for Ni, and 32 to 87 mg kg(-1) for Zn), but had no significant effect (p > 0.05) on leaf Cu concentrations. Based on results from this field study, USEPA's Part 503 risk model overpredicted transfer of these metals from biosolids-amended soil to corn.