ABSTRACT
OBJECTIVE: To compare the mechanical stability of a medial tibial plateau fracture model secured with a lateral locking periarticular plate versus a medial buttress plate in cyclic testing and load to failure. METHODS: Medial tibial plateau fractures were created in 6 matched pairs of fresh cadaveric tibias. In each pair of tibias, 1 side was randomly selected to be fixed with a lateral locking plate on 1 side and the contralateral limb to be fixed with a medial buttress plate. The fixated tibias then underwent cyclic testing followed by single-cycle failure compressive loading. Displacement of the medial tibial plateau was measured in both cyclic and failure testing. RESULTS: Statistical analyses revealed relevant trends in fixation strength during cyclic testing, but neither the mean maximum displacement during nor mean residual displacement after cyclic testing were statistically different between the 2 fixation techniques. Statistically significant differences were observed for the mean forces to failure however. The medial buttress plate construct provided greater fixation strength with its failure force of 4136 +/- 1469 N compared with the lateral locking plate mean failure force of 2895 +/- 1237 N (P < 0.05). CONCLUSION: In the setting of a vertically oriented fracture in a medial tibial plateau without comminution, the medial buttress plate provides significantly greater stability in static loading, and a trend toward improved stability with cyclic loading. Clinical correlation is necessary to substantiate these findings.
Subject(s)
Bone Plates , Fracture Fixation, Internal/instrumentation , Tibial Fractures/surgery , Aged, 80 and over , Biomechanical Phenomena , Cadaver , Humans , Prosthesis Design , Radiography , Tibial Fractures/diagnostic imaging , Tibial Fractures/physiopathology , Treatment OutcomeABSTRACT
PURPOSE: This study continued our previous investigations of the ligaments stabilizing the scaphoid and lunate in which we examined the scapholunate interosseous ligament, the radioscaphocapitate, and the scaphotrapezial ligament. In this current study, we examined the effects of sectioning the dorsal radiocarpal ligament, dorsal intercarpal ligament, scapholunate interosseous ligament, radioscaphocapitate, and scaphotrapezial ligaments. In the current study, the scapholunate interosseous ligament, radioscaphocapitate, and scaphotrapezial ligaments were sectioned in a different order than performed previously. METHODS: Three sets of 8 cadaver wrists were tested in a wrist joint motion simulator. In each set of wrists, only 3 of the 5 ligaments were cut in specific sequences. Each wrist was moved in continuous cycles of flexion-extension and radial-ulnar deviation. Kinematic data for the scaphoid and lunate were recorded for each wrist in the intact state, after the 3 ligaments were sectioned in various sequences and after the wrist was moved through 1,000 cycles of motion. RESULTS: Dividing the dorsal intercarpal or scaphotrapezial ligaments did not alter the motion of the scaphoid or lunate. Dividing the dorsal radiocarpal ligament alone caused a slight statistical increase in lunate radial deviation. Dividing the scapholunate interosseous ligament after first dividing the dorsal intercarpal, dorsal radiocarpal, or scaphotrapezial ligaments caused large increases in scaphoid flexion and lunate extension. CONCLUSIONS: Based on these findings, we concluded that the scapholunate interosseous ligament is the primary stabilizer and that the other ligaments are secondary stabilizers of the scapholunate articulation. Dividing the dorsal radiocarpal, dorsal intercarpal, or scaphotrapezial ligaments after cutting the scapholunate interosseous ligament produces further changes in scapholunate instability or results in changes in the kinematics for a larger portion of the wrist motion cycle.
Subject(s)
Ligaments, Articular/physiology , Lunate Bone/physiology , Movement/physiology , Scaphoid Bone/physiology , Wrist Joint/physiology , Aged , Aged, 80 and over , Biomechanical Phenomena , Female , Humans , Ligaments, Articular/surgery , Male , Middle Aged , Range of Motion, Articular/physiologyABSTRACT
PURPOSE: To determine whether the bony architecture of the distal radius and proximal scaphoid have a role in stabilizing the scaphoid, and to determine whether a relationship between the bony geometry measurements and the amount of wrist constraint could be determined. METHODS: Eight cadaver wrists were tested in a wrist joint motion simulator. The level of scapholunate instability after sectioning the scapholunate interosseous, radioscaphocapitate, and the scaphotrapezium ligaments was determined and related to radiographic measurements of volar tilt, lateral tilt (ulnar tilt of the radioscaphoid fossa), the depth of the radioscaphoid fossa, and 6 radii of curvature measurements of the proximal scaphoid and distal radius. The force to dorsally dislocate the scaphoid out of the radioscaphoid fossa was computed. RESULTS: The radioscaphoid fossa and scaphoid curvatures were larger in those wrists that did not show gross instability after ligamentous sectioning in the wrist simulator. Similarly, those wrists with a deeper radioscaphoid fossa and greater volar tilt were also more stable. The force required to dislocate these wrists was greater than in those wrists that showed gross carpal instability. CONCLUSIONS: This study suggests that the bony anatomy of the radius and scaphoid have a role in stabilizing the carpus after ligament injury. The effect of ligament sectioning on producing carpal instability may be moderated by the bone geometry of the radiocarpal joint. This may explain why some people may have a tear of the scapholunate interosseous ligament but not present with clinical symptoms.
Subject(s)
Joint Instability/physiopathology , Lunate Bone/physiopathology , Scaphoid Bone/physiopathology , Wrist Joint/physiopathology , Biomechanical Phenomena , Cadaver , Humans , Ligaments, Articular/injuries , Ligaments, Articular/physiopathology , Lunate Bone/anatomy & histology , Range of Motion, Articular/physiology , Scaphoid Bone/anatomy & histology , Wrist Joint/anatomy & histologyABSTRACT
PURPOSE: Carpal bones show hysteresis that is dependent on the direction of wrist motion during a continuous active loading protocol. We describe an accurate methodology for analyzing the hysteresis effect and we apply this model to analyze the effect of sequential ligament sectioning on scapholunate instability. METHODS: In 8 fresh cadaver forearms scaphoid, lunate, and third metacarpal motions were recorded while each wrist was moved in continuous cycles of active motion in flexion-extension and radioulnar deviation. Motions were analyzed for the intact state and after sequential sectioning of the scapholunate interosseous, scaphotrapezium, and radioscaphocapitate ligaments. Carpal motion was curve-fitted with respect to the third metacarpal motion using optimization criteria. The area between the 2 curves that represents opposite directions of wrist motion was measured to give the total hysteresis area. Repeated-measures analysis of variance was used to determine significance. RESULTS: In the flexion-extension trials the scaphoid and lunate total hysteresis area was significantly greater than the intact state only after all 3 ligaments were sectioned. In the radioulnar deviation trials the scaphoid total hysteresis area was significantly greater than the intact after just scapholunate interosseous ligament sectioning; however, the lunate total hysteresis area decreased with additional sequential sectionings in 4 of the 8 specimens as compared with the intact state. These 4 specimens started with a significantly greater intact total hysteresis area than the other 4 specimens. CONCLUSIONS: The computation of the total hysteresis area from the hysteresis effect was found to be a sensitive technique to determine the subtle onset of abnormal carpal motion. By using this technique in a ligament sectioning study significant increases in the total hysteresis area were seen after just scapholunate interosseous ligament sectioning during wrist radioulnar deviation. This subtle change may signify the onset of dynamic scapholunate instability. The total hysteresis area of the lunate in a subset of lax specimens did not increase after ligament sectioning. This divergent behavior may explain why some patients with scapholunate instability do not develop dorsal intercalated segmental instability.
Subject(s)
Biomechanical Phenomena , Carpal Bones/physiology , Movement/physiology , Aged , Cadaver , Female , Humans , Ligaments, Articular/physiology , Ligaments, Articular/surgery , Male , Transducers , Wrist Joint/physiologyABSTRACT
PURPOSE: To determine the in vitro motion of the scaphoid and lunate during wrist circumduction and wrist dart-throw motions and to see how these motions change after the ligamentous stabilizers of the scaphoid and lunate are sectioned in a manner simulating scapholunate instability. METHODS: Twenty-one fresh-frozen cadaver forearms were moved through a dart-throw motion and a circumduction motion using a wrist joint simulator. Scaphoid and lunate motion were measured with the wrist ligaments intact and after sectioning of the scapholunate interosseous ligament, the scaphotrapezium ligament, and the radioscaphocapitate ligament. RESULTS: In the intact wrist the scaphoid and lunate moved more during circumduction than during the dart-throw motion. With ligamentous sectioning the scaphoid flexed more and the lunate extended more during both the circumduction and dart-throw motions. During the circumduction motion both before and after sectioning the global motion of the scaphoid was greater than that of the lunate. After sectioning the scaphoid motion increased and the lunate motion decreased. CONCLUSIONS: The scaphoid and lunate motions were observed to change remarkably after ligamentous sectioning. The observed changes in carpal motion correlate with the clinical observation that after ligamentous injury arthritic changes occur in the radioscaphoid joint and not in the radiolunate joint. Analysis of the injured wrist in positions that combine flexion-extension and radial-ulnar deviation may allow noninvasive diagnosis of specific wrist ligament injuries.
Subject(s)
Ligaments, Articular/injuries , Lunate Bone/physiology , Movement/physiology , Scaphoid Bone/physiology , Wrist Joint/physiology , Adult , Aged , Aged, 80 and over , Cadaver , Female , Humans , Ligaments, Articular/physiology , Male , Middle Aged , Range of Motion, Articular/physiologyABSTRACT
Flexible intramedullary nails have been indicated to treat femoral fractures in pediatric patients. The purpose of this study was to examine the stability of simulated transverse fractures after retrograde intramedullary flexible nail fixation. Various nail diameter combinations were tested using composite femurs in bending, torsion, and a combined axial/bending test where a vertical compressive force was applied to the femoral head. The cross-sectional percent area fill of the nails within the femurs was also determined. In 4 point bending, the greatest repair stiffness was 12% of the intact stiffness. In torsion, the greatest stiffness was 1% of the intact stiffness for either internal or external rotation. The greatest repair stiffness was 80% of the intact stiffness for a compressive load applied to the femoral head. Nail combinations with single nail diameters greater than 40% of the mid-shaft canal width, as measured from an AP radiograph, prevented the fracture from being reduced and left a posterior gap. Flexible intramedullary nails may be of value in the treatment of pediatric femoral fractures, but care must be taken to insert nails that are correctly sized for the canal and to protect the healing fracture from high torsional and bending loads.
Subject(s)
Bone Nails , Femoral Fractures/surgery , Fracture Fixation, Intramedullary/methods , Biomechanical Phenomena , Child , Humans , Torsion AbnormalityABSTRACT
PURPOSE: This study is a continuation of our previous investigation of the ligaments stabilizing the scaphoid and lunate. We evaluated the effects of sectioning the scapholunate interosseous ligament, radioscaphocapitate ligament, and scaphotrapezial ligament in 3 sequences. METHODS: Three sets of 8 cadaver forearms were placed in a wrist simulator and moved in continuous cycles of flexion-extension and radial-ulnar deviation. Kinematic data for the scaphoid and lunate were recorded for each wrist in the intact state, after the 3 ligaments were sectioned in various sequences and after the wrist was moved through 1,000 cycles of motion. RESULTS: Sectioning only the scaphotrapezium ligament (ST) or the radioscaphocapitate ligament (RSC) resulted in minimal angular changes to the motion of the scaphoid and lunate. Sectioning of the scapholunate interosseous ligament (SLIL) or 1,000 cycles of repetitive wrist motion after ligament sectioning altered scaphoid and lunate kinematics. CONCLUSIONS: Based on these findings it was concluded that the SLIL is the primary stabilizer and the RSC and ST are secondary stabilizers of the scapholunate articulation. Repetitive motion after ligament injury probably results in further carpal instability.
Subject(s)
Ligaments, Articular/physiology , Lunate Bone/physiology , Movement/physiology , Scaphoid Bone/physiology , Adult , Aged , Aged, 80 and over , Biomechanical Phenomena , Cadaver , Female , Forearm , Humans , Ligaments, Articular/surgery , Male , Middle Aged , Wrist Joint/physiologyABSTRACT
PURPOSE: The use of early active motion protocols after repair of the thumb ulnar collateral ligament (UCL) theoretically could avoid the complications of postoperative immobilization and improve ligament healing. The goals of this study were as follows: (1) to develop an accurate model of acute UCL rupture, (2) to determine the strain pattern in the UCL during constrained active thumb motion in intact and repaired thumbs, and (3) to determine the load to failure and strain of the UCL during rupture in forced abduction. METHODS: Sixteen fresh-frozen adult cadaver thumbs were mounted in a testing apparatus designed for testing the strain in the UCL during constrained active motion and abduction load to failure. Strain data for the UCL during motion were measured. Specimens were tested to failure using an MTS machine. Dynamic strain data were acquired throughout the loading cycle. Repair of the torn ligament was performed with a suture anchor technique. Strain and load-to-failure measurements then were repeated in the repaired specimens. Differences in the strain values and failure forces between the intact and repaired specimens then were compared. RESULTS: A reliable model of a UCL rupture was created. Strains in the UCL were similar during active motion in both intact and repaired specimens. A significant decrease in maximum load to failure was noted in repaired specimens but failure reliably occurred at strains 3 times greater than expected with active motion. CONCLUSIONS: A controlled active motion therapy protocol after suture anchor repair of a ruptured UCL of the thumb is safe from a biomechanical point of view.
Subject(s)
Collateral Ligaments/injuries , Collateral Ligaments/surgery , Tendon Injuries/rehabilitation , Tendon Injuries/surgery , Adult , Biomechanical Phenomena , Collateral Ligaments/physiopathology , Humans , Models, Biological , Motion , Rupture/physiopathology , Rupture/rehabilitation , Rupture/surgery , Suture Techniques , Tendon Injuries/physiopathology , Thumb/injuries , Thumb/physiopathology , Thumb/surgery , UlnaABSTRACT
BACKGROUND: Even with optimal treatment, injuries from pumpkin carving accidents may leave people with compromised hand function. Pumpkin carving tools may reduce the incidence and/or magnitude of these injuries. However, evidence that they are safer is required before these knives can be recommended. METHODS: Two pumpkin carving knives were compared to a serrated and a plain kitchen knife. The forces required to cut and pierce a pumpkin were determined and then applied by a servo-hydraulic machine to each knife placed against cadaver hands in a manner designed to either lacerate Zone 2 of the finger (six tests for each knife) or to puncture the hand. Inspection and dissection determined the extent of injury. RESULTS: The pumpkin knives produced some injuries, however, they were fewer and less severe than those caused by the kitchen knives. CONCLUSIONS: Tools designed specifically for pumpkin carving may indeed be safer. Use of these products, and increased overall awareness of the risks of pumpkin carving in general, which clinicians could help promote, might reduce the frequency and severity of pumpkin carving injuries.
Subject(s)
Cooking and Eating Utensils , Hand Injuries/etiology , Wounds, Stab/etiology , Cucurbita , Equipment Design , Female , Hand Injuries/prevention & control , Humans , Male , Safety , Wounds, Stab/prevention & controlABSTRACT
PURPOSE: The primary purpose of this study was to measure the in vitro scaphoid and lunate motion during 9 different variations of a wrist dart throw motion. Another goal was to determine the specific dart throw motion that minimized scaphoid and lunate motion. METHODS: Scaphoid and lunate motion were recorded in 7 cadaver forearms during various combinations of wrist dart throw motions caused by a wrist joint motion simulator. RESULTS: During wrist flexion and extension the scaphoid and lunate motions follow the wrist motion. During wrist radial and ulnar deviation the scaphoid and lunate correspondingly flex and extend. During intermediate motions the scaphoid and lunate move as little as 26% of the total third metacarpal motion and do not necessarily follow a planar motion. CONCLUSIONS: These findings suggest that there may be a dart throw motion during which there may be minimal scaphoid and lunate motion. If a subject's wrist motion could be clinically restricted to this dart throw motion, early hand mobility might be possible after surgery on the scaphoid and lunate.
Subject(s)
Lunate Bone/physiology , Movement/physiology , Scaphoid Bone/physiology , Sports/physiology , Aged , Biomechanical Phenomena , Cadaver , Female , Humans , Male , Range of Motion, Articular/physiology , Wrist Joint/physiologyABSTRACT
Although in the proximal tibia the need for pin augmentation of cemented giant cell tumor defects depends on whether the defect is contained, there is controversy regarding the role for pins in the distal femur. The current study investigated whether Steinmann pin augmentation offers biomechanical advantages in cement reconstruction of contained defects of the lateral femoral condyle. Twelve pairs of human femurs were used. They were tested either with the bone intact, with a standardized contained defect in the lateral condyle, with a defect repaired with cement alone, and with a defect repaired with pins in the cement. Intact specimens had significantly higher load to failure than specimens with a defect. In the repaired specimens there were no significant differences in stiffness, peak load to failure, and energy to failure between the specimens repaired with just cement or augmented with pins. This study did not show any significant biomechanical advantage of this configuration of Steinmann pin reinforcement in cement for contained defects of the lateral femoral condyle.
Subject(s)
Bone Cements/therapeutic use , Bone Nails , Cementation/methods , Femur/pathology , Femur/physiopathology , Polymethyl Methacrylate/therapeutic use , Biomechanical Phenomena , Fracture Fixation, Intramedullary , Humans , Random AllocationABSTRACT
The objectives of this study were to (a). create 3D reconstructions of two carpal bones from single CT data sets and animate these bones with experimental in vitro motion data collected during dynamic loading of the wrist joint, (b). develop a technique to calculate the minimum interbone distance between the two carpal bones, and (c). validate the interbone distance calculation process. This method utilized commercial software to create the animations and an in-house program to interface with three-dimensional CAD software to calculate the minimum distance between the irregular geometries of the bones. This interbone minimum distance provides quantitative information regarding the motion of the bones studied and may help to understand and quantify the effects of ligamentous injury.
Subject(s)
Carpal Bones/diagnostic imaging , Carpal Bones/physiology , Imaging, Three-Dimensional/methods , Models, Biological , Movement/physiology , Radiographic Image Interpretation, Computer-Assisted/methods , User-Computer Interface , Computer Graphics , Computer Simulation , Data Display , Humans , In Vitro Techniques , Online Systems , Sex Factors , Wrist Joint/physiologyABSTRACT
PURPOSE: The purpose of this study was to determine biomechanically the relative contributions of the dorsal and palmar capsuloligamentous structures to dorsal and palmar carpal stability. METHODS: Seven fresh-frozen cadaver specimens were tested using a testing machine (MTS, Eden Prairie, MN) with low loads applied perpendicular to the axis of the radial diaphysis. We determined the loads required to achieve dorsal and palmar translation of the carpus on the radius as palmar and dorsal ligaments and capsule were sectioned sequentially. The relative contributions of the dorsal and palmar capsuloligamentous structures to dorsal and palmar stability were determined. RESULTS: The palmar structures provided a statistically significantly greater restraint (61%) to dorsal translation of the carpus than did the dorsal structures (2%). The palmar structures also provided a statistically greater restraint (48%) to palmar translation of the carpus than did the dorsal structures (6%). CONCLUSIONS: The palmar capsuloligamentous structures provided greater restraint to both dorsal and palmar translation of the carpus. We suggest that surgeons consider repair or reconstruction of traumatic injuries to these structures.
Subject(s)
Carpal Bones/physiology , Joint Capsule/physiology , Ligaments, Articular/physiology , Wrist Joint/physiology , Aged , Aged, 80 and over , Carpal Bones/physiopathology , Female , Humans , Joint Capsule/physiopathology , Joint Dislocations/complications , Joint Dislocations/physiopathology , Joint Instability/etiology , Joint Instability/physiopathology , Ligaments, Articular/physiopathology , Male , Middle Aged , Pronation/physiology , Weight-Bearing/physiology , Wrist Joint/physiopathologyABSTRACT
This study evaluated the effects of sectioning the scapholunate interosseous ligament, radioscaphocapitate ligament, and scaphotrapezial ligament on the kinematics of the scaphoid and lunate. Eight cadaver upper extremities were placed in a wrist joint simulator and moved in continuous cycles of flexion-extension and radial-ulnar deviation. Positional data of the scaphoid and lunate were obtained in the intact state, after the scapholunate ligament was cut; after the scapholunate and scaphotrapezial ligaments were cut; after the scapholunate, scaphotrapezial, and radioscaphocapitate ligaments were cut; and after all 3 ligaments were cut and the specimen was placed through an additional 1,000 cycles of flexion-extension. Cutting the scapholunate ligament caused changes in scaphoid and lunate motion during flexion-extension, but not radial-ulnar deviation. Additional sectioning of the scaphotrapezial ligament followed by the radioscaphocapitate ligament caused further kinematic changes in these carpal bones. One thousand cycles of motion after all 3 ligaments were sectioned caused additional kinematic changes in the scaphoid and lunate. The scapholunate ligament appears to be the primary stabilizer between the scaphoid and lunate. The radioscaphocapitate and scaphotrapezial ligaments are secondary restraints. Repetitive cyclic motion after ligament sectioning appears to have additional deleterious effects on carpal kinematics.
Subject(s)
Ligaments, Articular/surgery , Lunate Bone/physiology , Scaphoid Bone/physiology , Wrist Joint/physiology , Aged , Aged, 80 and over , Analysis of Variance , Biomechanical Phenomena , Cadaver , Electromagnetic Phenomena , Humans , Imaging, Three-Dimensional , Middle Aged , Movement/physiologyABSTRACT
The biomechanical effectiveness of 2 ulnar head prostheses was evaluated in 5 fresh-frozen cadaver arms. By using electromagnetic sensors, the amount of forearm rotation, diastasis, and dorsal/palmar subluxation of the radius at the level of the sigmoid notch was measured with the forearm in neutral rotation, pronation, and supination with and without dorsal/palmar loading. Testing was done in the intact specimens and after insertion of 2 types of ulnar head prostheses. Dynamic forearm rotation was also achieved by applying loads in the line of action of the appropriate pronator or supinator muscles to obtain a centroidal path of the radius relative to the ulna. Overall after ulnar head replacement forearm rotation lessened in pronation, diastasis decreased in most forearm positions, and subluxation increased in supination compared with the intact specimen. Despite these changes, both prostheses maintained near-normal biomechanics of the distal radioulnar joint when compared with the irregular behavior occurring after distal ulna resection. Therefore these prostheses are suggested for restoration of distal radioulnar joint function.
Subject(s)
Joint Prosthesis , Radius/surgery , Ulna/surgery , Biomechanical Phenomena , Electromagnetic Phenomena , Forearm/physiology , Humans , Joint Dislocations/diagnosis , Mathematics , Prosthesis Design , Radius/physiology , Range of Motion, Articular/physiology , Ulna/physiology , Weight-Bearing/physiologyABSTRACT
The role of the dorsal radiocarpal wrist ligament has been the subject of several investigations. Several biomechanical studies have used sensors inserted dorsally into the wrist joint to evaluate its pressure distribution. The purpose of this study was to evaluate whether a dorsal capsulotomy that sections the dorsal radiocarpal ligament or insertion of a flexible pressure sensor alters scaphoid or lunate kinematics. Eight cadaver upper extremities were instrumented with motion sensors and placed in a wrist joint simulator. Each arm was moved through continual cycles of wrist flexion/extension and radial/ulnar deviation. Motion data were obtained in the intact state, after a capsulotomy, and after insertion of the sensor. We found that either a dorsal capsulotomy sectioning the dorsal radiocarpal ligament or insertion of the pressure sensor alters scaphoid and lunate kinematics during dynamic wrist motion. This study supports the clinical belief that this dorsal wrist ligament should be spared during surgical approaches to the carpus.