ABSTRACT
Avian infectious bronchitis is an acute respiratory disease of poultry of particular concern for global food security. Investigation of infectious bronchitis virus (IBV), the causative agent of avian infectious bronchitis, via reverse genetics enables deeper understanding of virus biology and a rapid response to emerging variants. Classic methods of reverse genetics for IBV can be time consuming, rely on recombination for the introduction of mutations, and, depending on the system, can be subject to genome instability and unreliable success rates. In this study, we have applied data-optimized Golden Gate Assembly design to create a rapidly executable, flexible, and faithful reverse genetics system for IBV. The IBV genome was divided into 12 fragments at high-fidelity fusion site breakpoints. All fragments were synthetically produced and propagated in E. coli plasmids, amenable to standard molecular biology techniques for DNA manipulation. The assembly can be carried out in a single reaction, with the products used directly in subsequent viral rescue steps. We demonstrate the use of this system for generation of point mutants and gene replacements. This Golden Gate Assembly-based reverse genetics system will enable rapid response to emerging variants of IBV, particularly important to vaccine development for controlling spread within poultry populations.
Subject(s)
Infectious bronchitis virus , Reverse Genetics , Infectious bronchitis virus/genetics , Reverse Genetics/methods , Animals , Genome, Viral , Coronavirus Infections/virology , Coronavirus Infections/veterinary , Plasmids/genetics , Poultry Diseases/virology , Escherichia coli/geneticsABSTRACT
OBJECTIVE: To examine the extent to which geometric parameters derived from dual-energy x-ray absorptiometry (DXA) scans in the UK Biobank study are related to hip osteoarthritis (HOA) independently of sex, age and body size. DESIGN: Femoral neck width (FNW), diameter of the femoral head (DFH) and hip axis length (HAL) were derived automatically from left hip DXA scans in UK Biobank using outline points placed around the hip by a machine-learning program. Correlations were calculated between geometric parameters, age, height, and weight. Logistic regression was used to examine the relationship of geometric parameters with radiographic HOA, hospital diagnosed HOA (HESOA), and Cox proportional hazards model to evaluate the relationship with total hip replacement (THR). Analyses were adjusted for sex, age, height, weight, and geometric parameters. RESULTS: The study consisted of 40,312 participants. In age and sex-adjusted analyses, FNW, HAL and DFH were related to increased risk of radiographic HOA. In a model adjusted for age, sex, height, weight and other geometric parameters, both FNW and HAL retained independent relationships with radiographic HOA [FNW: odds ratios 2.38 (2.18-2.59), HAL: 1.25 (1.15-1.36)], while DFH was now protective [0.55 (0.50-0.61)]. Only FNW was independently related to HESOA [2.20 (1.80-2.68)] and THR [hazard ratios 2.51 (1.89-3.32)]. CONCLUSION: Greater FNW and HAL were independently related to an increased risk of radiographic HOA, whereas greater DFH appeared to be protective. Greater FNW was independently associated with HESOA and THR. These results suggest that DXA-derived geometric parameters, particularly FNW, could help determine HOA and THR risk.
Subject(s)
Bone Density , Osteoarthritis, Hip , Humans , Cross-Sectional Studies , Osteoarthritis, Hip/diagnostic imaging , Osteoarthritis, Hip/surgery , Biological Specimen Banks , Risk Factors , Absorptiometry, Photon/methods , United Kingdom/epidemiologyABSTRACT
Golden Gate Assembly is a flexible method of DNA assembly and cloning that permits the joining of multiple fragments in a single reaction through predefined connections. The method depends on cutting DNA using a Type IIS restriction enzyme, which cuts outside its recognition site and therefore can generate overhangs of any sequence while separating the recognition site from the generated fragment. By choosing compatible fusion sites, Golden Gate permits the joining of multiple DNA fragments in a defined order in a single reaction. Conventionally, this method has been used to join five to eight fragments in a single assembly round, with yield and accuracy dropping off rapidly for more complex assemblies. Recently, we demonstrated the application of comprehensive measurements of ligation fidelity and bias data using data-optimized assembly design (DAD) to enable a high degree of assembly accuracy for very complex assemblies with the simultaneous joining of as many as 52 fragments in one reaction. Here, we describe methods for applying DAD principles and online tools to evaluate the fidelity of existing fusion site sets and assembly standards, selecting new optimal sets, and adding fusion sites to existing assemblies. We further describe the application of DAD to divide known sequences at optimal points, including designing one-pot assemblies of small genomes. Using the T7 bacteriophage genome as an example, we present a protocol that includes removal of native Type IIS sites (domestication) simultaneously with parts generation by PCR. Finally, we present recommended cycling protocols for assemblies of medium to high complexity (12-36 fragments), methods for producing high-quality parts, examples highlighting the importance of DNA purity and fragment stoichiometric balance for optimal assembly outcomes, and methods for assessing assembly success. © 2023 New England Biolabs, Inc. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Assessing the fidelity of an overhang set using the NEBridge Ligase Fidelity Viewer Basic Protocol 2: Generating a high-fidelity overhang set using the NEBridge GetSet Tool Alternate Protocol 1: Expanding an existing overhang set using the NEBridge GetSet Tool Basic Protocol 3: Dividing a genomic sequence with optimal fusion sites using the NEBridge SplitSet Tool Basic Protocol 4: One-pot Golden Gate Assembly of 12 fragments into a destination plasmid Alternate Protocol 2: One-pot Golden Gate Assembly of 24+ fragments into a destination plasmid Basic Protocol 5: One-pot Golden Gate Assembly of the T7 bacteriophage genome from 12+ parts Support Protocol 1: Generation of high-purity amplicons for assembly Support Protocol 2: Cloning assembly parts into a holding vector Support Protocol 3: Quantifying DNA concentration using a Qubit 4 fluorometer Support Protocol 4: Visualizing large assemblies via TapeStation Support Protocol 5: Validating phage genome assemblies via ONT long-read sequencing.
Subject(s)
Bacteriophage T7 , Bacteriophages , Bicycling , DNA Restriction Enzymes , DomesticationABSTRACT
DNA ligases catalyze the joining of breaks in nucleic acid backbones and are essential enzymes for in vivo genome replication and repair across all domains of life. These enzymes are also critically important to in vitro manipulation of DNA in applications such as cloning, sequencing, and molecular diagnostics. DNA ligases generally catalyze the formation of a phosphodiester bond between an adjacent 5'-phosphate and 3'-hydroxyl in DNA, but they exhibit different substrate structure preferences, sequence-dependent biases in reaction kinetics, and variable tolerance for mismatched base pairs. Information on substrate structure and sequence specificity can inform both biological roles and molecular biology applications of these enzymes. Given the high complexity of DNA sequence space, testing DNA ligase substrate specificity on individual nucleic acid sequences in parallel rapidly becomes impractical when a large sequence space is investigated. Here, we describe methods for investigating DNA ligase sequence bias and mismatch discrimination using Pacific Biosciences Single-Molecule Real-Time (PacBio SMRT) sequencing technology. Through its rolling-circle amplification methodology, SMRT sequencing can give multiple reads of the same insert. This feature permits high-quality top- and bottom-strand consensus sequences to be determined while preserving information on top-bottom strand mismatches that can be obfuscated or lost when using other sequencing methods. Thus, PacBio SMRT sequencing is uniquely suited to measuring substrate bias and enzyme fidelity through multiplexing a diverse set of sequences in a single reaction. The protocols describe substrate synthesis, library preparation, and data analysis methods suitable for measuring fidelity and bias of DNA ligases. The methods are easily adapted to different nucleic acid substrate structures and can be used to characterize many enzymes under a variety of reaction conditions and sequence contexts in a rapid and high-throughput manner. © 2023 New England Biolabs and The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Preparation of overhang DNA substrates for ligation Basic Protocol 2: Preparation of ligation fidelity libraries Support Protocol 1: Preparation of ligation libraries for PacBio Sequel II sequencing Support Protocol 2: Loading and sequencing of a prepared library on the Sequel II instrument Basic Protocol 3: Computational processing of ligase fidelity sequencing data.
Subject(s)
DNA Ligases , Technology , Substrate Specificity , DNA Ligase ATP , Sequence Analysis, DNAABSTRACT
Large DNA constructs (>10 kb) are invaluable tools for genetic engineering and the development of therapeutics. However, the manufacture of these constructs is laborious, often involving multiple hierarchical rounds of preparation. To address this problem, we sought to test whether Golden Gate assembly (GGA), an in vitro DNA assembly methodology, can be utilized to construct a large DNA target from many tractable pieces in a single reaction. While GGA is routinely used to generate constructs from 5 to 10 DNA parts in one step, we found that optimization permitted the assembly of >50 DNA fragments in a single round. We applied these insights to genome construction, successfully assembling the 40 kb T7 bacteriophage genome from up to 52 parts and recovering infectious phage particles after cellular transformation. The assembly protocols and design principles described here can be applied to rapidly engineer a wide variety of large and complex assembly targets.
Subject(s)
Genetic Engineering , Synthetic Biology , Cloning, Molecular , DNA , Genetic Engineering/methods , Genetic Vectors , Genome , Synthetic Biology/methodsABSTRACT
DNA ligases, critical enzymes for in vivo genome maintenance and modern molecular biology, catalyze the joining of adjacent 3'-OH and 5'-phosphorylated ends in DNA. To determine whether DNA annealing equilibria or properties intrinsic to the DNA ligase enzyme impact end-joining ligation outcomes, we used a highly multiplexed, sequencing-based assay to profile mismatch discrimination and sequence bias for several ligases capable of efficient end-joining. Our data reveal a spectrum of fidelity and bias, influenced by both the strength of overhang annealing as well as sequence preferences and mismatch tolerances that vary both in degree and kind between ligases. For example, while T7 DNA ligase shows a strong preference for ligating high GC sequences, other ligases show little GC-dependent bias, with human DNA Ligase 3 showing almost none. Similarly, mismatch tolerance varies widely among ligases, and while all ligases tested were most permissive of G:T mismatches, some ligases also tolerated bulkier purine:purine mismatches. These comprehensive fidelity and bias profiles provide insight into the biology of end-joining reactions and highlight the importance of ligase choice in application design.
Subject(s)
DNA Ligases , DNA , DNA/genetics , Humans , PurinesABSTRACT
It has been predicted that 30 to 80% of archaeal genomes remain annotated as hypothetical proteins with no assigned gene function. Further, many archaeal organisms are difficult to grow or are unculturable. To overcome these technical and experimental hurdles, we developed a high-throughput functional genomics screen that utilizes capillary electrophoresis (CE) to identify nucleic acid modifying enzymes based on activity rather than sequence homology. Here, we describe a functional genomics screening workflow to find DNA modifying enzyme activities encoded by the hyperthermophile Thermococcus kodakarensis (T. kodakarensis). Large DNA insert fosmid libraries representing an â¼5-fold average coverage of the T. kodakarensis genome were prepared in Escherichia coli. RNA-seq showed a high fraction (84%) of T. kodakarensis genes were transcribed in E. coli despite differences in promoter structure and translational machinery. Our high-throughput screening workflow used fluorescently labeled DNA substrates directly in heat-treated lysates of fosmid clones with capillary electrophoresis detection of reaction products. Using this method, we identified both a new DNA endonuclease activity for a previously described RNA endonuclease (Nob1) and a novel AP lyase DNA repair enzyme family (termed 'TK0353') that is found only in a small subset of Thermococcales. The screening methodology described provides a fast and efficient way to explore the T. kodakarensis genome for a variety of nucleic acid modifying activities and may have implications for similar exploration of enzymes and pathways that underlie core cellular processes in other Archaea. IMPORTANCE This study provides a rapid, simple, high-throughput method to discover novel archaeal nucleic acid modifying enzymes by utilizing a fosmid genomic library, next-generation sequencing, and capillary electrophoresis. The method described here provides the details necessary to create 384-well fosmid library plates from Thermococcus kodakarensis genomic DNA, sequence 384-well fosmids plates using Illumina next-generation sequencing, and perform high-throughput functional read-out assays using capillary electrophoresis to identify a variety of nucleic acid modifying activities, including DNA cleavage and ligation. We used this approach to identify a new DNA endonuclease activity for a previously described RNA endonuclease (Nob1) and identify a novel AP lyase enzyme (TK0353) that lacks sequence homology to known nucleic acid modifying enzymes.
Subject(s)
Archaeal Proteins , Thermococcus , Archaeal Proteins/metabolism , DNA, Archaeal/genetics , DNA, Archaeal/metabolism , Electrophoresis, Capillary , Escherichia coli/genetics , Escherichia coli/metabolism , GenomicsABSTRACT
OBJECTIVES: To examine whether acetabular dysplasia (AD), cam and/or pincer morphology are associated with radiographic hip osteoarthritis (rHOA) and hip pain in UK Biobank (UKB) and, if so, what distribution of osteophytes is observed. DESIGN: Participants from UKB with a left hip dual-energy X-ray absorptiometry (DXA) scan had alpha angle (AA), lateral centre-edge angle (LCEA) and joint space narrowing (JSN) derived automatically. Cam and pincer morphology, and AD were defined using AA and LCEA. Osteophytes were measured manually and rHOA grades were calculated from JSN and osteophyte measures. Logistic regression was used to examine the relationships between these hip morphologies and rHOA, osteophytes, JSN, and hip pain. RESULTS: 6,807 individuals were selected (mean age: 62.7; 3382/3425 males/females). Cam morphology was more prevalent in males than females (15.4% and 1.8% respectively). In males, cam morphology was associated with rHOA [OR 3.20 (95% CI 2.41-4.25)], JSN [1.53 (1.24-1.88)], and acetabular [1.87 (1.48-2.36)], superior [1.94 (1.45-2.57)] and inferior [4.75 (3.44-6.57)] femoral osteophytes, and hip pain [1.48 (1.05-2.09)]. Broadly similar associations were seen in females, but with weaker statistical evidence. Neither pincer morphology nor AD showed any associations with rHOA or hip pain. CONCLUSIONS: Cam morphology was predominantly seen in males in whom it was associated with rHOA and hip pain. In males and females, cam morphology was associated with inferior femoral head osteophytes more strongly than those at the superior femoral head and acetabulum. Further studies are justified to characterise the biomechanical disturbances associated with cam morphology, underlying the observed osteophyte distribution.
Subject(s)
Hip Dislocation/diagnostic imaging , Hip Joint/diagnostic imaging , Osteoarthritis, Hip/diagnostic imaging , Osteophyte/diagnostic imaging , Absorptiometry, Photon , Arthralgia/etiology , Cohort Studies , Cross-Sectional Studies , Female , Humans , Male , Middle Aged , Risk FactorsABSTRACT
OBJECTIVE: The purpose of this study is to describe predictors of total hip replacement (THR) in community dwelling older adults. A better understanding of predictors of THR can aid in triaging patients and researching preventative strategies. DESIGN: At baseline, participants had assessment of radiographic OA and cam morphology (from pelvic radiographs), shape mode scores and hip bone mineral density (BMD; from dual energy X-ray absorptiometry (DXA)). After 2.6 and 5 years, participants reported hip pain using WOMAC (Western Ontario and McMaster Universities Osteoarthritis Index), and had hip structural changes assessed using magnetic resonance imaging (MRI). Risk of THR was analysed using mixed-effect Poisson regression. RESULTS: Incidence of THR for OA over 14 years was 4.6% (37/801). As expected, WOMAC hip pain and hip radiographic OA both predicted risk of THR. Additionally, shape mode 2 score (decreasing acetabular coverage) (RR 1.83/SD; 95% CI 1.1-3.04), shape mode 4 score (non-spherical femoral head) (RR 0.59/SD; 95% CI 0.36-0.96), cam morphology (α > 60°) (RR 2.2/SD; 95% CI 1.33-3.36), neck of femur BMD (RR 2.09/SD, 95% CI 1.48-2.94) and bone marrow lesions (BMLs) increased risk of THR (RR 7.10/unit; 95% CI 1.09-46.29). CONCLUSION: In addition to hip pain and radiographic hip OA, measures of hip shape, cam morphology, BMD and BMLs independently predict risk of THR. This supports the role of hip bone geometry and structure in the pathogenesis of end stage hip OA and has identified factors that can be used to improve prediction models for THR.
Subject(s)
Arthroplasty, Replacement, Hip , Osteoarthritis, Hip/surgery , Absorptiometry, Photon , Aged , Aged, 80 and over , Cohort Studies , Female , Hip Joint/abnormalities , Hip Joint/diagnostic imaging , Humans , Magnetic Resonance Imaging , Male , Middle Aged , Osteoarthritis, Hip/diagnostic imaging , Pain Measurement , RadiographyABSTRACT
DNA assembly is an integral part of modern synthetic biology, as intricate genetic engineering projects require robust molecular cloning workflows. Golden Gate assembly is a frequently employed DNA assembly methodology that utilizes a Type IIS restriction enzyme and a DNA ligase to generate recombinant DNA constructs from smaller DNA fragments. However, the utility of this methodology has been limited by a lack of resources to guide experimental design. For example, selection of the DNA sequences at fusion sites between fragments is based on broad assembly guidelines or pre-vetted sets of junctions, rather than being customized for a particular application or cloning project. To facilitate the design of robust assembly reactions, we developed a high-throughput DNA sequencing assay to examine reaction outcomes of Golden Gate assembly with T4 DNA ligase and the most commonly used Type IIS restriction enzymes that generate three-base and four-base overhangs. Next, we incorporated these findings into a suite of webtools that design assembly reactions using the experimental data. These webtools can be used to create customized assemblies from a target DNA sequence or a desired number of fragments. Lastly, we demonstrate how using these tools expands the limits of current assembly systems by carrying out one-pot assemblies of up to 35 DNA fragments. Full implementation of the tools developed here enables direct expansion of existing assembly standards for modular cloning systems (e.g. MoClo) as well as the formation of robust new high-fidelity standards.
Subject(s)
DNA/metabolism , Synthetic Biology/methods , DNA Ligases/metabolism , DNA Restriction Enzymes/metabolism , Nucleotides/metabolismABSTRACT
Small RNAs are important regulators of gene expression and are involved in human development and disease. Next generation sequencing (NGS) allows for scalable, genome-wide studies of small RNA; however, current methods are challenged by low sensitivity and high bias, limiting their ability to capture an accurate representation of the cellular small RNA population. Several studies have shown that this bias primarily arises during the ligation of single-strand adapters during library preparation, and that this ligation bias is magnified by 2'-O-methyl modifications (2'OMe) on the 3' terminal nucleotide. In this study, we developed a novel library preparation process using randomized splint ligation with a cleavable adapter, a design which resolves previous challenges associated with this ligation strategy. We show that a randomized splint ligation based workflow can reduce bias and increase the sensitivity of small RNA sequencing for a wide variety of small RNAs, including microRNA (miRNA) and tRNA fragments as well as 2'OMe modified RNA, including Piwi-interacting RNA and plant miRNA. Finally, we demonstrate that this workflow detects more differentially expressed miRNA between tumorous and matched normal tissues. Overall, this library preparation process allows for highly accurate small RNA sequencing and will enable studies of 2'OMe modified RNA with new levels of detail.
Subject(s)
Gene Library , RNA, Small Untranslated/isolation & purification , Sequence Analysis, RNA/methods , Electrophoresis, Capillary , Female , Humans , Male , Methylation , MicroRNAs/chemistry , MicroRNAs/genetics , MicroRNAs/isolation & purification , Nucleic Acid Hybridization , Oligoribonucleotides/chemistry , RNA, Neoplasm/chemistry , RNA, Neoplasm/genetics , RNA, Neoplasm/isolation & purification , RNA, Plant/chemistry , RNA, Plant/genetics , RNA, Plant/isolation & purification , RNA, Small Untranslated/chemistry , RNA, Small Untranslated/genetics , RNA, Transfer/chemistry , RNA, Transfer/isolation & purification , Random Allocation , Sensitivity and Specificity , Sequence AlignmentABSTRACT
Synthetic biology relies on the manufacture of large and complex DNA constructs from libraries of genetic parts. Golden Gate and other Type IIS restriction enzyme-dependent DNA assembly methods enable rapid construction of genes and operons through one-pot, multifragment assembly, with the ordering of parts determined by the ligation of Watson-Crick base-paired overhangs. However, ligation of mismatched overhangs leads to erroneous assembly, and low-efficiency Watson Crick pairings can lead to truncated assemblies. Using sets of empirically vetted, high-accuracy junction pairs avoids this issue but limits the number of parts that can be joined in a single reaction. Here, we report the use of comprehensive end-joining ligation fidelity and bias data to predict high accuracy junction sets for Golden Gate assembly. The ligation profile accurately predicted junction fidelity in ten-fragment Golden Gate assembly reactions and enabled accurate and efficient assembly of a lac cassette from up to 24-fragments in a single reaction.
Subject(s)
DNA/metabolism , Synthetic Biology/methods , Base Pairing , DNA/chemistry , DNA Ligases/metabolism , Lac Operon/geneticsABSTRACT
DNA ligases are key enzymes in molecular and synthetic biology that catalyze the joining of breaks in duplex DNA and the end-joining of DNA fragments. Ligation fidelity (discrimination against the ligation of substrates containing mismatched base pairs) and bias (preferential ligation of particular sequences over others) have been well-studied in the context of nick ligation. However, almost no data exist for fidelity and bias in end-joining ligation contexts. In this study, we applied Pacific Biosciences Single-Molecule Real-Time sequencing technology to directly sequence the products of a highly multiplexed ligation reaction. This method has been used to profile the ligation of all three-base 5'-overhangs by T4 DNA ligase under typical ligation conditions in a single experiment. We report the relative frequency of all ligation products with or without mismatches, the position-dependent frequency of each mismatch, and the surprising observation that 5'-TNA overhangs ligate extremely inefficiently compared to all other Watson-Crick pairings. The method can easily be extended to profile other ligases, end-types (e.g. blunt ends and overhangs of different lengths), and the effect of adjacent sequence on the ligation results. Further, the method has the potential to provide new insights into the thermodynamics of annealing and the kinetics of end-joining reactions.
Subject(s)
DNA Ligases , High-Throughput Nucleotide Sequencing/methods , Sequence Analysis, DNA/methods , Base Pair Mismatch , DNA End-Joining RepairABSTRACT
OBJECTIVE: Predicting who will develop osteoarthritis, assessing how rapidly their disease will progress and monitoring early responses to treatment are key to the development of therapeutic agents able to treat this crippling disease and to their future clinical use. Statistical Shape Modelling (SSM) enables quantification of variations in multiple geometric measures describing the whole hip joint to be considered in concert. This prospective study evaluates the responsiveness of SSM to changes in hip-shape within 1 year. METHODS: Sixty-two people, mean age 67.1 yrs, were recruited. Dual-energy X-ray Absorptiometry images were taken at three timepoints (baseline, 6 and 12 months). Based on Kellgren-Lawrence grading (KLG) of their baseline images, subjects were classified into control/doubtful OA: KLG < 1 in both hips; moderate OA: KLG = 2; and severe OA: KLG ≥ 3 in their most severe hip. Morphology was quantified using SSM and changes in shape were assessed using generalised estimating equations. Standardized response means (SRMs) were calculated for the first and second 6 month periods, then the full 12 months. RESULTS: Disease severity ranged from KLG0-KLG4 in the 124 hips assessed at baseline. Three SSM modes (Modes 1, 3 and 4) were associated with OA severity. Across the whole cohort, SRM magnitudes ranged from 0.16 to 0.63. The greatest subgroup SRM (magnitude 0.91) was observed over 12 months in those subjects with moderate OA (KLG2). CONCLUSIONS: We have demonstrated that SSM can capture changes in hip shape over 6 and 12 months across the entire hip joint providing a sensitive measure of hip OA progression.
Subject(s)
Absorptiometry, Photon , Osteoarthritis, Hip/diagnostic imaging , Osteoarthritis, Hip/pathology , Aged , Disease Progression , Female , Humans , Male , Middle Aged , Models, Statistical , Prospective Studies , Time FactorsABSTRACT
DNA ligases catalyze the repair of phosphate backbone breaks in DNA, acting with highest activity on breaks in one strand of duplex DNA. Some DNA ligases have also been observed to ligate two DNA fragments with short complementary overhangs or blunt-ended termini. In this study, several wild-type DNA ligases (phage T3, T4, and T7 DNA ligases, Paramecium bursaria chlorella virus 1 (PBCV1) DNA ligase, human DNA ligase 3, and Escherichia coli DNA ligase) were tested for their ability to ligate DNA fragments with several difficult to ligate end structures (blunt-ended termini, 3'- and 5'- single base overhangs, and 5'-two base overhangs). This analysis revealed that T4 DNA ligase, the most common enzyme utilized for in vitro ligation, had its greatest activity on blunt- and 2-base overhangs, and poorest on 5'-single base overhangs. Other ligases had different substrate specificity: T3 DNA ligase ligated only blunt ends well; PBCV1 DNA ligase joined 3'-single base overhangs and 2-base overhangs effectively with little blunt or 5'- single base overhang activity; and human ligase 3 had highest activity on blunt ends and 5'-single base overhangs. There is no correlation of activity among ligases on blunt DNA ends with their activity on single base overhangs. In addition, DNA binding domains (Sso7d, hLig3 zinc finger, and T4 DNA ligase N-terminal domain) were fused to PBCV1 DNA ligase to explore whether modified binding to DNA would lead to greater activity on these difficult to ligate substrates. These engineered ligases showed both an increased binding affinity for DNA and increased activity, but did not alter the relative substrate preferences of PBCV1 DNA ligase, indicating active site structure plays a role in determining substrate preference.
Subject(s)
DNA Ligases/metabolism , DNA Breaks, Double-Stranded , Electrophoresis, Capillary , HumansABSTRACT
OBJECTIVE: Statistical shape modelling (SSM) of radiographs has been used to explore relationships between altered joint shape and hip osteoarthritis (OA). We aimed to apply SSM to Dual-energy X-ray Absorptiometry (DXA) hip scans, and examine associations between resultant hip shape modes (HSMs), radiographic hip OA (RHOA), and hip pain, in a large population based cohort. METHOD: SSM was performed on baseline hip DXA scans from the Osteoporotic Fractures in Men (MrOS) Study. Associations between the top ten HSMs, and prevalent RHOA from pelvic radiographs obtained 4.6 years later, were analysed in 4100 participants. RHOA was defined as Croft score ≥2. Hip pain was based on pain on walking, hip pain on examination, and Western Ontario and McMaster Universities Arthritis Index (WOMAC). RESULTS: The five HSMs associated with RHOA showed features of either pincer- or cam-type deformities. HSM 1 (increased pincer-type deformity) was positively associated with RHOA [1.23 (1.09, 1.39)] [odds ratio (OR) and 95% CI]. HSM 8 (reduced pincer-type deformity) was inversely associated with RHOA [0.79 (0.70, 0.89)]. HSM 10 (increased cam-type deformity) was positively associated with RHOA [1.21 (1.07, 1.37)]. HSM 3 and HSM 4 (reduced cam-type deformity) were inversely associated with RHOA [0.73 (0.65, 0.83) and 0.82 (0.73, 0.93), respectively]. HSM 3 was inversely related to pain on examination [0.84 (0.76, 0.92)] and walking [0.88, (0.81, 0.95)], and to WOMAC score [0.87 (0.80, 0.93)]. CONCLUSIONS: DXA-derived measures of hip shape are associated with RHOA, and to a lesser extent hip pain, possibly reflecting their role in the pathogenesis of hip OA.
Subject(s)
Acetabulum/diagnostic imaging , Femur Head/diagnostic imaging , Femur Neck/diagnostic imaging , Hip Joint/diagnostic imaging , Osteoarthritis, Hip/epidemiology , Absorptiometry, Photon , Aged , Arthralgia/epidemiology , Cohort Studies , Cross-Sectional Studies , Femoracetabular Impingement , Humans , Male , Odds Ratio , Osteoarthritis, Hip/diagnostic imaging , Prevalence , Principal Component Analysis , Prospective Studies , RadiographyABSTRACT
DNA ligases, essential to both in vivo genome integrity and in vitro molecular biology, catalyze phosphodiester bond formation between adjacent 3'-OH and 5'-phosphorylated termini in dsDNA. This reaction requires enzyme self-adenylylation, using ATP or NAD+ as a cofactor, and AMP release concomitant with phosphodiester bond formation. In this study, we present the first fast time scale binding kinetics of T4 DNA ligase to both nicked substrate DNA (nDNA) and product-equivalent non-nicked dsDNA, as well as binding and release kinetics of AMP. The described assays utilized a fluorescein-dT labeled DNA substrate as a reporter for ligase·DNA interactions via stopped-flow fluorescence spectroscopy. The analysis revealed that binding to nDNA by the active adenylylated ligase occurs in two steps, an initial rapid association equilibrium followed by a transition to a second bound state prior to catalysis. Furthermore, the ligase binds and dissociates from nicked and nonsubstrate dsDNA rapidly with initial association affinities on the order of 100 nM regardless of enzyme adenylylation state. DNA binding occurs through a two-step mechanism in all cases, confirming prior proposals of transient binding followed by a transition to a productive ligase·nDNA (Lig·nDNA) conformation but suggesting that weaker nonproductive "closed" complexes are formed as well. These observations demonstrate the mechanistic underpinnings of competitive inhibition by rapid binding of nonsubstrate DNA, and of substrate inhibition by blocking of the self-adenylylation reaction through nick binding by deadenylylated ligase. Our analysis further reveals that product release is not the rate-determining step in turnover.
Subject(s)
DNA Ligases/metabolism , DNA/metabolism , Adenosine Monophosphate/metabolism , Adenosine Triphosphate/metabolism , Kinetics , Protein BindingABSTRACT
Anodophilic bacteria have the ability to generate electricity in microbial fuel cells (MFCs) by extracellular electron transfer to the anode. We investigated the anode-specific responses of Shewanella oneidensis MR-1, an exoelectroactive Gammaproteobacterium, using for the first time iTRAQ and 2D-LC MS/MS driven membrane proteomics to compare protein abundances in S. oneidensis when generating power in MFCs, and growing in a continuous culture. The regulated dataset produced was enriched in membrane proteins. Proteins shown to be more abundant in anaerobic electroactive anodic cells included efflux pump TolC and an uncharacterised tetratricopeptide repeat (TPR) protein, whilst the TonB2 system and associated uncharacterised proteins such as TtpC2 and DUF3450 were more abundant in microaerobic planktonic cells. In order to validate the iTRAQ data, the functional role for TolC was examined using a δTolC knockout mutant of S. oneidensis. Possible roles for the uncharacterised proteins were identified using comparative bioinformatics. We demonstrate that employing an insoluble extracellular electron acceptor requires multiple proteins involved in cell surface properties. All MS and processed data are available via ProteomeXchange with identifier PXD004090.
Subject(s)
Bioelectric Energy Sources , Proteomics/methods , Shewanella/genetics , Biofilms , Electricity , Electrodes , Electron Transport , Electrons , Shewanella/chemistry , Tandem Mass SpectrometryABSTRACT
Melioidosis is an emerging infectious disease caused by Burkholderia pseudomallei and is associated with high morbidity and mortality rates in endemic areas. Antibiotic treatment is protracted and not always successful; even with appropriate therapy, up to 40% of individuals presenting with melioidosis in Thailand succumb to infection. In these circumstances, an effective vaccine has the potential to have a dramatic impact on both the scale and the severity of disease. Currently, no vaccines are licensed for human use. A leading vaccine candidate is the capsular polysaccharide consisting of a homopolymer of unbranched 1â3 linked 2-O-acetyl-6-deoxy-ß-d-manno-heptopyranose. Here, we present the chemical synthesis of this challenging antigen using a novel modular disaccharide assembly approach. The resulting hexasaccharide was coupled to the nontoxic Hc domain of tetanus toxin as a carrier protein to promote recruitment of T-cell help and provide a scaffold for antigen display. Mice immunized with the glycoconjugate developed IgM and IgG responses capable of recognizing native capsule, and were protected against infection with over 120 × LD50 of B. pseudomallei strain K96243. This is the first report of the chemical synthesis of an immunologically relevant and protective hexasaccharide fragment of the capsular polysaccharide of B. pseudomallei and serves as the rational starting point for the development of an effective licensed vaccine for this emerging infectious disease.
Subject(s)
Glycoconjugates/chemistry , Glycoconjugates/immunology , Mannose/chemistry , Melioidosis/prevention & control , Oligosaccharides/chemistry , Animals , Bacterial Vaccines/chemistry , Bacterial Vaccines/immunology , Burkholderia pseudomallei/immunology , Burkholderia pseudomallei/physiology , Female , Mice , Mice, Inbred BALB C , Oligosaccharides/chemical synthesisABSTRACT
DNA ligases are essential both to in vivo replication, repair and recombination processes, and in vitro molecular biology protocols. Prior characterization of DNA ligases through gel shift assays has shown the presence of a nick site to be essential for tight binding between the enzyme and its dsDNA substrate, with no interaction evident on dsDNA lacking a nick. In the current study, we observed a significant substrate inhibition effect, as well as the inhibition of both the self-adenylylation and nick-sealing steps of T4 DNA ligase by non-nicked, non-substrate dsDNA. Inhibition by non-substrate DNA was dependent only on the total DNA concentration rather than the structure; with 1 µg/mL of 40-mers, 75-mers, or circular plasmid DNA all inhibiting ligation equally. A >15-fold reduction in T4 DNA ligase self-adenylylation rate when in the presence of high non-nicked dsDNA concentrations was observed. Finally, EMSAs were utilized to demonstrate that non-substrate dsDNA can compete with nicked dsDNA substrates for enzyme binding. Based upon these data, we hypothesize the inhibition of T4 DNA ligase by non-nicked dsDNA is direct evidence for a two-step nick-binding mechanism, with an initial, nick-independent, transient dsDNA-binding event preceding a transition to a stable binding complex in the presence of a nick site.