Vibrational spectroscopy of anionic nitrate complexes of UO22+ and Eu3+ isolated in the gas phase.

Wavelength-selective infrared multiple photon photo-dissociation (IRMPD) was used to generate spectra of anionic nitrate complexes of UO(2)(2+) and Eu(3+) in the mid-infrared region. Similar spectral patterns were observed for both species, including splitting of the antisymmetric O-N-O stretch into high and low frequency components with the magnitude of the splitting consistent with attachment of nitrate to a strong Lewis acid center. The frequencies measured for [UO(2)(NO(3))(3)](-) were within a few cm(-1) of those measured in the condensed phase, the best agreement yet achieved for a comparison of IRMPD with condensed phase absorption spectra. In addition, experimentally-determined values were in good general agreement with those predicted by DFT calculations, especially for the antisymmetric UO(2) stretch. The spectrum from the [UO(2)(NO(3))(3)](-) was compared with that of [Eu(NO(3))(4)](-), which showed that nitrate was bound more strongly to the Eu(3+) metal center, consistent with its higher charge. The spectrum of a unique uranyl-oxo species having an elemental composition [UO(9)N(2)](-) was also acquired, that contained nitrate absorptions suggestive of a [UO(2)(NO(3))(2)(O)](-) structure; the spectrum lacked bands indicative of nitrite and superoxide that would be indicative of an alternative [UO(2)(NO(3))(NO(2))(O(2))](-) structure.

Secondary ion mass spectrometric characterization of nail polishes and paint surfaces.

A variety of paint and fingernail polish samples, which were visually similar, but had different chemical compositions and formulations, was analyzed using quadrupole static secondary ion mass spectrometry (SIMS). Coating distinction was easily achieved in many cases because of the presence of dominant ions derived from the components of the coating, which could be observed in the SIMS spectra. In other instances, coating distinction was difficult within a product line because of spectral complexity; for this reason and because of the large numbers of spectra generated in this study, multivariate statistical techniques were employed, which allowed the meaningful classification and comparison of spectra. Partial Least Squares (PLS) and Principal Component Analysis (PCA) were applied to quadrupole SIMS data. PCA showed distinct spectral differences between most spectral groups, and also emphasized the reproducibility of the SIMS spectra. When using PLS analysis, reasonably accurate coating identification was achieved with the data. Overall, the PLS model is more than 90% effective in identifying the spectrum of a particular coating, and nearly 100% effective at telling which coating components represented in the PLS models are not present in a spectrum. The level of spectral variation caused by sample bombardment in the SIMS analysis was investigated using Fourier transform infrared spectroscopy (FT-IR) and quadrupole static SIMS. Changes in the FT-IR spectra were observed and were most likely a result of a number of factors involving the static SIMS analysis. However, the bulk of the sample is unaltered and may be used for further testing.

Characterization of VX on concrete using ion trap secondary ionization mass spectrometry.

The nerve agent VX (O-ethyl S-2-diisopropylaminoethyl methyl phosphonothiolate) was analyzed on the surface of concrete samples using an ion trap secondary ion mass spectrometer (IT-SIMS). It was found that VX could be detected down to an absolute quantity of 5 ng on a concrete chip, or to a surface coverage of 0.0004 monolayers on crushed concrete. To achieve these levels of detection, the m/z 268-->128 ion fragmentation was measured using MS2, where m/z 268 corresponds to [VX + H]+, and 128 corresponds to a diisopropylvinylammonium isomer, that is formed by the elimination of the phosphonothiolate moiety. Detection at these levels was accomplished by analyzing samples that had been recently exposed to VX, i.e., within an hour. When the VX-exposed concrete samples were aged, the SIMS signature for intact VX had disappeared, which signaled the degradation of the compound on the concrete surface. The VX signature was replaced by ions which are interpreted in terms of VX degradation products, which appear to be somewhat long lived on the concrete surface. These compounds include ethylmethylphosphonic acid (EMPA), diisopropyl taurine (DIPT), diisopropylaminoethanethiol (DESH), bis(diisopropylaminoethane) disulfide [(DES)2], and a particularly tenacious compound that may correspond to diisopropylvinylamine (DIVA), or an isomer thereof. It was found that the thiolamine-derived degradation products DIPT, DESH, and (DES)2 were removed with isopropyl alcohol extraction. However, the DIVA-related degradation product was observed to strongly adhere to the concrete surface for longer than one week. Although quantitation was not possible in this set of experiments, the results clearly show the rapid degradation of VX on concrete, as well as the surface sensitivity of the IT-SIMS for intact VX and its adsorptive degradation products.

Identification of the nitrogen-based blister agents bis(2-chloroethyl)methylamine (HN-2) and tris(2-chloroethyl)amine (HN-3) and their hydrolysis products on soil using ion trap secondary ion mass spectrometry.

The nitrogen blister agents HN-2 (bis(2-chloroethyl)methylamine) and HN-3 (tris(2-chloroethyl)amine) were directly analyzed on the surface of soil samples using ion trap secondary ion mass spectrometry (SIMS). In the presence of water, HN-1 (bis(2-choroethyl)ethylamine), HN-2 and HN-3 undergo hydrolysis to form N-ethyldiethanolamine, N-methyldiethanolamine and triethanolamine (TEA), respectively; these compounds can be readily detected as adsorbed species on soil particles. When soil samples spiked with HN-3 in alcohol were analyzed, 2-alkoxyethylamine derivatives were observed on the sample surfaces. This result shows that nitrogen blister agents will undergo condensation reactions with nucleophilic compounds and emphasizes the need for an analytical methodology capable of detecting a range of degradation and condensation products on environmental surfaces. The ability of ion trap SIMS to isolate and accumulate ions, and then perform tandem mass spectrometric analysis improves the detection of low-abundance surface contaminants and the selectivity of the technique. Utilizing these techniques, the limits of detection for HN-3 were studied as a function of surface coverage. It was found that HN-3 could be detected at a surface coverage of 0.01 monolayer, which corresponds to 20 ppm (mass/mass) for a soil having a surface area of 2.2 m(2) g(-1). TEA, the exhaustive hydrolysis product of HN-3, was detected at a surface coverage of 0.001 monolayer, which corresponds to 0.86 ppm.

Analysis of VX on soil particles using ion trap secondary ion mass spectrometry.

The direct detection of the nerve agent VX (methylphosphonothioic acid, S-[2-[bis(1-methylethyl)amino]ethyl] O-ethyl ester) on milligram quantities of soil particles has been achieved using ion trap secondary ion mass spectrometry (IT-SIMS). VX is highly adsorptive toward a wide variety of surfaces; this attribute makes detection using gas-phase approaches difficult but renders the compound very amenable to surface detection. An ion trap mass spectrometer, modified to perform SIMS, was employed in the present study. A primary ion beam (ReO4-) was fired on axis through the ion trap, where it impacted the soil particle samples. [VX + H]+, [VX + H]+ fragment ions, and ions from the chemical background were sputtered into the gas-phase environment of the ion trap, where they were either scanned out or isolated and fragmented (MS2). At a surface concentration of 0.4 monolayer, intact [VX + H]+, and its fragment ions, were readily observable above background. However, at lower concentrations, the secondary ion signal from VX became obscured by ions derived from the chemical background on the surface of the soil particles. MS2 analysis using the ion trap was employed to improve detection of lower concentrations of VX: detection of the 34S isotopic ion of [VX + H]+, present at a surface concentration of approximately 0.002 monolayer, was accomplished. The study afforded the opportunity to investigate the fragmentation chemistry of VX. Semiempirical calculations suggest strongly that the molecule is protonated at the N atom. Deuterium labeling showed that formation of the base peak ion (C2H4)N(i-C3H7)2+ involves transfer of the amino proton to the phosphonothioate moiety prior to, or concurrent with, C-S bond cleavage. To manage the risk associated with working with the compound, the vacuum unit of the IT-SIMS was located in a hood, connected by cables to the externally located electronics and computer.

Detection of 2-chloroethylethyl sulfide on soil particles using ion trap-secondary ion mass spectrometry.

2-Chloroethylethyl sulfide (CEES) is used as a simulant for mustard (HD) in a study to develop secondary ion mass spectrometry (SIMS) for rapid, semi-quantitative detection of mustard on soil. Selectivity and sensitivity are markedly improved employing multiple-stage mass spectrometry (MS(n)) using an ion trap SIMS. C(2)H(5)SC(2)H(4)(+) from CEES eliminates C(2)H(4) and H(2)S, which are highly diagnostic. CEES was detectable at 0.0012 monolayer on soil. This corresponds to approximately 15 ppm (mass/mass) for a soil having a surface area of 12 m(2) g(-1). A single analysis could be conducted using only 2 mg of soil in under 5 min.