Shoulder instability in professional football players.

BACKGROUND: Shoulder instability is a common problem in American football players entering the National Football League (NFL). Treatment options include nonoperative and surgical stabilization. PURPOSE: This study evaluated how the method of treatment of pre-NFL shoulder instability affects the rate of recurrence and the time elapsed until recurrence in players on 1 NFL team. DESIGN: Retrospective cohort. METHODS: Medical records from 1980 to 2008 for 1 NFL team were reviewed. There were 328 players included in the study who started their career on the team and remained on the team for at least 2 years (mean, 3.9 years; range, 2-14 years). The history of instability prior to entering the NFL and the method of treatment were collected. Data on the occurrence of instability while in the NFL were recorded to determine the rate and timing of recurrence. RESULTS: Thirty-one players (9.5%) had a history of instability prior to entering the NFL. Of the 297 players with no history of instability, 39 (13.1%) had a primary event at a mean of 18.4 ± 22.2 months (range, 0-102 months) after joining the team. In the group of players with prior instability treated with surgical stabilization, there was no statistical difference in the rate of recurrence (10.5%) or the timing to the instability episode (mean, 26 months) compared with players with no history of instability. Twelve players had shoulder instability treated nonoperatively prior to the NFL. Five of these players (41.7%) had recurrent instability at a mean of 4.4 ± 7.0 months (range, 0-16 months). The patients treated nonoperatively had a significantly higher rate of recurrence (P = 0.02) and an earlier time of recurrence (P = 0.04). The rate of contralateral instability was 25.8%, occurring at a mean of 8.6 months. CONCLUSION: Recurrent shoulder instability is more common in NFL players with a history of nonoperative treatment. Surgical stabilization appears to restore the rate and timing of instability to that of players with no prior history of instability.

Arthroscopic versus open distal clavicle excision: a comparative assessment at intermediate-term follow-up.

BACKGROUND: While few comparative studies exist, it has been suggested that open distal clavicle excisions (DCEs) provide inferior results when compared with the all-arthroscopic technique. PURPOSE: The purpose of this study was to compare the intermediate-term (5-year follow-up) results of patients undergoing arthroscopic versus open DCE for the treatment of recalcitrant acromioclavicular joint pain. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: All patients who underwent an arthroscopic or open DCE between January 1999 and September 2006 were reviewed. Forty-eight patients (49 shoulders; 32 arthroscopic, 17 open) following DCE without significant glenohumeral pathologic changes were included. The mean follow-up for group I (open) and group II (arthroscopic) was 5.3 years and 4.2 years, respectively. The American Shoulder and Elbow Surgeons (ASES) score, visual analog scale (VAS) pain score, surgical time, and minimum radiographic acromioclavicular joint distance were calculated. Each patient completed a questionnaire assessing their scar satisfaction, percentage of normal shoulder function, and willingness to have the surgery again. Risk factors for poor outcomes were analyzed. RESULTS: Arthroscopic patients had significantly less pain (P = .035) by VAS (0.61 ± 1.02) compared with open (1.59 ± 2.15) at final follow-up. There was no significant difference between group I and group II with regard to ASES (87.5 ± 17.6 vs 94.6 ± 8.6), percentage of normal shoulder function (89.7% ± 12.5 vs 92.9% ± 8.6), average operative time (53.1 minutes vs 48 minutes), or radiographic resection distance (12.8 ± 2.1 mm vs 9.5 ± 2.9 mm). In the open group, patients with 16 of 17 shoulders were satisfied with their scar and 100% would do it again. In the arthroscopic group, patients with 31 of 32 shoulders (97%) were both satisfied and would have the surgery again. CONCLUSION: Open and arthroscopic DCE are both effective surgeries to treat recalcitrant acromioclavicular joint pain. At intermediate-term follow-up, they provide similarly good to excellent results with regard to patient satisfaction and shoulder function. Although both are effective treatments, less residual pain was found using the arthroscopic technique.

Total shoulder arthroplasty utilizing mini-stem humeral components: technique and short-term results.

INTRODUCTION: Throughout the field of orthopedic surgery, there has been a trend toward using smaller incisions and implants that preserve as much normal anatomy as possible. The use of bone sparing technology, such as partial and full surface replacements of the humeral head, while attractive in younger patients, does not allow the best exposure for proper glenoid replacement. Additionally, there are other situations when the use of surface replacements is contraindicated. There are also patients with an existing total elbow replacement or a humeral malunion or deformity in which a traditional long-stem component would not fit. For these reasons, a mini-stem humeral component for total shoulder arthroplasty was developed. In this study, we hypothesized that total shoulder replacement using the mini-stem humeral component could provide low complication rates and good to excellent results, as measured by postoperative Constant-Murley and UCLA shoulder scores at minimum 2 years postoperatively. MATERIALS AND METHODS: This was a retrospective review of the first 49 mini-stem shoulder replacements (47 patients) for primary osteoarthritis. There were 26 male and 23 female patients. UCLA Shoulder Score and Constant Murley Scores were obtained on all patients at a minimum of 2 years postoperatively (average 29 months; range 24-43 months). Radiographs were interpreted by a musculoskeletal radiologist. Intraoperative blood loss was documented as was postoperative pain using a visual analog pain scale. RESULTS: Patients experienced over 90% good to excellent results at minimum 2 year follow up. ROM improved significantly in all parameters. Postoperative UCLA scores at final follow up averaged 27.5 while Constant-Murley scores averaged 91. Small lucent lines (<1 mm) were noted in 11 patients. Five of 49 stems were placed in varus but the postoperative result was not affected in any of these patients. One patient suffered an acute subscapularis rupture that required repair. CONCLUSIONS: This is the first report to document the efficacy of mini-stemmed humeral components used during total shoulder arthroplasty. Our study group showed good to excellent results as well as improvement in range of motion at minimum 2-year follow-up. The results presented in this study are comparable to previous outcomes achieved with conventional length humeral components, and suggest that mini-stem humeral components are an effective option for total shoulder arthroplasty.

Effect of radiofrequency energy on glenohumeral fluid temperature during shoulder arthroscopy.

BACKGROUND: Reports of glenohumeral chondrolysis following arthroscopy have raised concern about the deleterious effects that thermal devices may have on articular cartilage. The purpose of this study was to investigate the effects of flow and duration of treatment with a thermal device on temperatures within cadaveric glenohumeral joint specimens. It was hypothesized that the use of a thermal device during surgery increases the temperature of fluid within the joint to >45 degrees C, which has been shown to cause chondrocyte death. METHODS: Temperature was measured at four locations within ten cadaver shoulder joints. Eight heating trials were performed on each cadaver shoulder to test three variables: the method of heating (continuous or intermittent), the fluid-pump flow rate (no flow, 50% flow, or 100% flow), and the location of the radiofrequency probe (the radiofrequency energy was either applied directly to anterior capsular tissue in a paintbrush pattern or held adjacent to the glenoid without tissue contact). RESULTS: Temperatures of >45 degrees C occurred in every trial. The average maximum temperatures in all no-flow conditions were significantly higher than those in the trials with flow. Higher temperatures were measured by the anterior probe in all trials. When the heating had been applied adjacent to the glenoid, without tissue contact, the time needed to cool to a safe temperature was significantly longer in the no-flow states (average, 140.5 seconds) than it was in the 50% flow states (average, 12.5 seconds) or the 100% flow states (average, 8.5 seconds). CONCLUSIONS: Use of a thermal probe during arthroscopy may cause joint fluid temperatures to reach levels high enough to cause chondrocyte death. Maintaining adequate fluid-pump flow rates may help to lower joint fluid temperatures and protect articular cartilage.

Traumatic segmental bone loss in a pediatric patient treated with bifocal bone transport.

SUMMARY: Bone transport is a method of distraction osteogenesis that allows the creation of regenerate bone using a dynamic external fixator. We report on the use of bifocal bone transport to treat a skeletally immature patient with 15 cm of post-traumatic segmental bone loss from the distal tibia.

Arthroscopic treatment of symptomatic discoid meniscus in children: classification, technique, and results.

PURPOSE: The purpose of this study was to review the operative results of children and young adults treated arthroscopically for symptomatic discoid lateral menisci. METHODS: The medical records and radiographic studies of 27 consecutive patients (30 knees) who underwent arthroscopic treatment for symptomatic discoid meniscus between 1998 and 2002 were reviewed. RESULTS: The mean patient age was 10.1 years (range, 3 to 20 years), with 19 female and 8 male patients. The mean duration of symptoms before surgery was 13.9 months, with 28 knees (93%) having pain and 20 knees (67%) having mechanical symptoms. All patients were treated arthroscopically. Arthroscopic saucerization was successful in 28 of 30 knees. In 2 cases with large complex tears meniscal salvage was not possible and a complete arthroscopic meniscectomy was performed. Operative classification of the menisci revealed 22 complete (4 Wrisberg type) and 8 incomplete discoid menisci, with meniscal tears being present in 23 of 30 (77%). Meniscal instability was noted in 77% of knees (23 of 30), with anterior horn instability in 53% (n = 16), posterior instability in 16% (n = 5), and combined anterior and posterior instability in 6% (n = 2). All cases of anterior horn instability were treated with an outside-in arthroscopic repair technique, whereas all cases of posterior horn instability were treated with meniscal repair via an inside-out arthroscopic technique. Twenty-one patients (23 knees) had full follow-up of greater than 1 year. For these 21 patients, the mean length of follow-up was 37.4 months (range, 12 to 77 months), and at final follow-up, all patients exhibited full knee flexion beyond 135 degrees. Three patients reported residual knee pain, and four reported intermittent mechanical symptoms. At final follow-up, 2 patients felt that their activity level remained partially limited. CONCLUSIONS: Our results show the short-term efficacy of arthroscopic saucerization and repair to the capsule in selected cases of symptomatic discoid menisci. On the basis of this experience and other recent reports documenting a high rate of anterior horn instability, an arthroscopic classification system for discoid lateral menisci is proposed. Menisci are classified as complete or incomplete discoid and are then subclassified based on the presence of instability as a result of deficient capsular attachment and, finally, based on the location of the absent capsular attachment. LEVEL OF EVIDENCE: Level IV, therapeutic case series.

Hybrid locked plating of osteoporotic fractures of the humerus.

BACKGROUND: Locked plating techniques recently have gained popularity and offer a different biomechanical approach for fracture fixation compared with traditional compression plating. In certain clinical situations, it may be preferable to employ a "hybrid" construct, in which an unlocked screw is used to assist with reduction and locked screws are subsequently used to protect the initial reduction. In the present study, we used an unstable osteoporotic fracture model of the humerus to determine (1) whether a hybrid construct behaved more like a locked construct or a conventional unlocked construct and (2) whether there was a difference between locked and unlocked constructs. METHODS: Thirty third-generation Sawbones humeri were divided into three groups of ten humeri each. A locking plate with combination holes was applied to each bone with use of either a locked construct, an unlocked construct, or a hybrid construct. To simulate purchase in osteoporotic bone, all screw-holes were drilled to 0.3 mm less than the diameter of the screw used. Each specimen was then osteotomized in the middle part of the shaft, and a 5-mm segment was removed. Oscillating cyclic torsion testing was performed to +/-10 N-m for 1000 cycles, torsional stiffness was determined at periodic cyclic intervals, and the groups were compared. RESULTS: The locked and hybrid constructs demonstrated similar behavior. The initial stiffness was similar in these two groups. At ten cycles, the locked and hybrid constructs retained 96.3% and 95.4% of their initial stiffness, respectively. During the remainder of cycling the stiffness of the locked and hybrid constructs decreased in a linear fashion (R(2) = 0.89 and 0.88, respectively), and at 1000 cycles the stiffness of the locked and hybrid constructs averaged 80.0% and 79.2% of the initial values, respectively (p = 1.0). In contrast, the unlocked constructs initially were significantly less stiff than both the locked and hybrid constructs (p < 0.001). At ten cycles the unlocked constructs retained 80.4% of their initial stiffness, and at 1000 cycles they retained only 22.3% of their initial stiffness. CONCLUSIONS: Hybrid constructs are mechanically similar to locked constructs, and both are significantly more stable than unlocked constructs under torsional cyclic loading. CLINICAL RELEVANCE: Combining screws in the hybrid configuration used in the present study did not compromise the mechanical performance of the construct. Hybrid constructs may decrease cost and may provide additional clinical value when treating fractures in osteoporotic bone.

Osteoporosis and skeletal fractures.

Osteoporosis affects millions of individuals worldwide, rendering them susceptible to fragility fractures of the spine, hip, and wrist and leading to significant morbidity, mortality, and economic cost. Given the substantial impact of osteoporosis on both patients and the medical community, it is imperative that physicians improve awareness and knowledge of osteoporosis in the setting of low-energy fractures. In this review, we provide information on effective means of preventing fragility fractures and introduce clinicians to issues pertinent to the patient who suffers an osteoporotic fracture. Prevention of fragility fractures centers around adequate mineral nutrition, including daily calcium and vitamin D supplementation, as well as prescription antiresorptive medications such as bisphosphonates or teriparatide therapy in severe cases, both of which have been shown to decrease future fracture risk. Balance and strength training also play important roles in the management of the osteoporotic patient, particularly following a low-energy fracture, and external hip protectors may be useful for certain patients. Kyphoplasty and vertebroplasty are two minimally invasive techniques that show great promise in the treatment of vertebral compression fractures, although questions regarding long-term biomechanical effects still exist. Traditionally, osteoporosis has been underdiagnosed and undertreated following a low-energy fracture in an elderly patient. Although treatment rates may be improving through public health initiatives, the majority of patients with osteoporosis remain inadequately treated. Perioperative intervention programs that focus on patient education about osteoporosis and treatment options lead to significant increases in intervention and treatment. Reducing the risk of skeletal fractures in patients susceptible to osteoporosis involves improved physician education on the risk factors and management of osteoporosis, as well as informing patients on the significance of dual-energy X-ray absorptiometry testing and medical treatment so that they may serve as their own healthcare advocates in this often-undertreated disease.

Helical plating of the proximal humerus.

The ideal treatment for fractures of the proximal humerus has not been definitively agreed upon. Several recent reports have described a technique of helical plating for proximal humeral fractures, in which the proximal plate is placed laterally on the greater tuberosity, and spirals 90 degrees distally to lie on the anterior surface of the humeral shaft. The purpose of this study was to evaluate the feasibility of helical plating using a less invasive surgical approach and placing screws percutaneously in the distal plate. Dissection of 10 cadaveric upper extremity specimens was performed, using an extended anterolateral acromial approach followed by percutaneous helical plating. With the plate secured, the neurovascular structures which crossed the anterior humerus superficial to the plate were exposed and identified. Only the musculocutaneous nerve crossed anterior to the plate and was at risk for percutaneous screw placement. The nerve location was found in a consistent location among the specimens. The danger zone for the nerve location was found to be at an average of 13.5 cm from the greater tuberosity (99% CI: 12.2-14.8 cm). Though clinical experience is necessary to validate this plating technique, it appears that avoiding this danger zone in which the musculocutaneous nerve crosses will allow safe percutaneous screw placement and permit minimally invasive plating of these fractures.

The extended anterolateral acromial approach allows minimally invasive access to the proximal humerus.

Lateral approaches to the proximal humerus have been limited by the position of the axillary nerve. Extensive surgical dissection through a deltopectoral approach may further damage the remaining tenuous blood supply in comminuted fractures. The purpose of our study was to explore a direct anterolateral, less invasive approach to the proximal humerus. Twenty cadaver shoulders were dissected using the extended anterolateral acromial approach through the anterior deltoid raphe. Multiple parameters were measured regarding the axillary nerve. The nerve was easily palpable in all specimens as it exited the quadrilateral space, and predictably was found and protected deep to the raphe, approximately 35 mm from the prominence of the greater tuberosity. Examination of the entire anterior nerve revealed that no branches besides the main motor trunk crossed the deltoid raphe. Subsequently, this approach was used in 16 patients with proximal humerus fractures, none of whom has had complications related to the surgical approach. This minimally invasive surgical approach seems to be safe, and may be useful in treating proximal humerus fractures.

Complete exposure of the articular surface for fixation of patellar fractures.

Anterior tension band fixation constructs are among the mainstay of treatment of patella fractures and lead to reliable results with simple transverse fracture patterns. However, comminuted fractures of the patella require much more extensive articular reconstruction than interdigitating two large fragments to achieve a good result. In this report, we describe a technique for exposure, reduction, and stabilization of patella fractures that allows for direct visual reduction of the articular surface. Subsequent devices are applied directly to the bony surfaces of the patella without soft-tissue interposition, which distinguishes it from traditional approaches. This technique may be used to ensure articular surface congruity in simple transverse fractures and may be particularly useful in comminuted fractures when patellar excision would otherwise be considered.

A minimally invasive approach for plate fixation of the proximal humerus.

Plate fixation for unstable fractures of the proximal humerus has seen mixed results as evidenced by the trials of new methods of fixation. The deltopectoral surgical approach is most frequently used and requires significant muscle retraction and soft tissue stripping to expose the lateral humeral neck. This may contribute to avascular necrosis and fixation failure. Lateral approaches have been limited to 5 cm distal to the acromion because of the course of the anterior branch of the axillary nerve. A recent anatomic study has demonstrated the predictability of the position of the axillary nerve as it crosses the anterior deltoid raphe, which allows it to be isolated and protected, and dissection can be extended distally. In addition, no accessory motor branches to the anterior head of the deltoid cross the raphe, so extending an incision through the raphe after protecting the main motor branch of the axillary does not place the innervation to the anterior deltoid at risk. This surgical approach allows exposure of the proximal humerus and indirect reduction of the fracture, with subsequent locking plate fixation, adhering to the principles of biological fixation.

Surgical treatment of pediatric femoral shaft fractures.

PURPOSE OF REVIEW: Femoral shaft fractures are among the most common fractures in children. Depending on the patient's age, fracture location, pattern, mechanism of injury, and associated injuries, several different treatment options exist. The purpose of this review is to discuss these different clinical situations and the recommended treatment methods, as well as to characterize the latest literature and recommendations. RECENT FINDINGS: In the past several years, there have been significant changes in the approach to the treatment of pediatric femoral shaft fractures, particularly in school-aged children. Young children have traditionally been treated conservatively with good results, and this method is still currently advocated. Adolescents over the age of 12 are generally treated with rigid intramedullary rods. However, in children between the ages of 5 and 12, new surgical treatment modalities have been tested with good outcomes, and, as new data emerge, these methods are becoming preferable to conservative treatment. SUMMARY: Children who sustain femoral shaft fractures can present difficult challenges to both orthopedists and pediatricians. A recent shift in treatment in children between ages of 5 and 12 from nonoperative to surgical intervention has led to shorter hospital stays and earlier return to activity with reliable fracture healing.