A Comparison of Two Types of Acoustic Emission Sensors for the Characterization of Hydrogen-Induced Cracking.

Acoustic emission (AE) technology is a non-destructive testing (NDT) technique that is able to monitor the process of hydrogen-induced cracking (HIC). AE uses piezoelectric sensors to convert the elastic waves generated from the growth of HIC into electric signals. Most piezoelectric sensors have resonance and thus are effective for a certain frequency range, and they will fundamentally affect the monitoring results. In this study, two commonly used AE sensors (Nano30 and VS150-RIC) were used for monitoring HIC processes using the electrochemical hydrogen-charging method under laboratory conditions. Obtained signals were analyzed and compared on three aspects, i.e., in signal acquisition, signal discrimination, and source location to demonstrate the influences of the two types of AE sensors. A basic reference for the selection of sensors for HIC monitoring is provided according to different test purposes and monitoring environments. Results show that signal characteristics from different mechanisms can be identified more clearly by Nano30, which is conducive to signal classification. VS150-RIC can identify HIC signals better and provide source locations more accurately. It can also acquire low-energy signals better, which is more suitable for monitoring over a long distance.

Acoustic Emission Source Location Using Finite Element Generated Delta-T Mapping.

One of the most significant benefits of Acoustic Emission (AE) testing over other Non-Destructive Evaluation (NDE) techniques lies in its damage location capability over a wide area. The delta-T mapping technique developed by researchers has been shown to enable AE source location to a high level of accuracy in complex structures. However, the time-consuming and laborious data training process of the delta-T mapping technique has prevented this technique from large-scale application on large complex structures. In order to solve this problem, a Finite Element (FE) method was applied to model training data for localization of experimental AE events on a complex plate. Firstly, the FE model was validated through demonstrating consistency between simulated data and the experimental data in the study of Hsu-Nielsen (H-N) sources on a simple plate. Then, the FE model with the same parameters was applied to a planar location problem on a complex plate. It has been demonstrated that FE generated delta-T mapping data can achieve a reasonable degree of source location accuracy with an average error of 3.88 mm whilst decreasing the time and effort required for manually collecting and processing the training data.

Nature and Nurture: Genotype-Dependent Differential Responses of Root Architecture to Agar and Soil Environments.

Root development is crucial for plant growth and therefore a key factor in plant performance and food production. Arabidopsis thaliana is the most commonly used system to study root system architecture (RSA). Growing plants on agar-based media has always been routine practice, but this approach poorly reflects the natural situation, which fact in recent years has led to a dramatic shift toward studying RSA in soil. Here, we directly compare RSA responses to agar-based medium (plates) and potting soil (rhizotrons) for a set of redundant loss-of-function plethora (plt) CRISPR mutants with variable degrees of secondary root defects. We demonstrate that plt3plt7 and plt3plt5plt7 plants, which produce only a handful of emerged secondary roots, can be distinguished from other genotypes based on both RSA shape and individual traits on plates and rhizotrons. However, in rhizotrons the secondary root density and the total contribution of the side root system to the RSA is increased in these two mutants, effectively rendering their phenotypes less distinct compared to WT. On the other hand, plt3, plt3plt5, and plt5plt7 mutants showed an opposite effect by having reduced secondary root density in rhizotrons. This leads us to believe that plate versus rhizotron responses are genotype dependent, and these differential responses were also observed in unrelated mutants short-root and scarecrow. Our study demonstrates that the type of growth system affects the RSA differently across genotypes, hence the optimal choice of growth conditions to analyze RSA phenotype is not predetermined.

An Assessment of the Effect of Progressive Water Absorption on the Interlaminar Strength of Unidirectional Carbon/Epoxy Composites Using Acoustic Emission.

Carbon Fibre-Reinforced Polymers (CFRPs) in aerospace applications are expected to operate in moist environments where carbon fibres have high resistance to water absorption; however, polymers do not. To develop a truly optimised structure, it is important to understand this degradation process. This study aims to expand the understanding of the role of water absorption on fibrous/polymeric structures, particularly in a matrix-dominant property, namely interlaminar strength. This work used Acoustic Emission (AE), which could be integrated into any Structural Health Monitoring System for aerospace applications, optical strain measurements, and microscopy to provide an assessment of the gradual change in failure mechanisms due to the degradation of a polymer's structure with increasing water absorption. CFRP specimens were immersed in purified water and kept at a constant temperature of 90 °C for 3, 9, 24 and 43 days. The resulting interlaminar strength was investigated through short-beam strength (SBS) testing. The SBS values decreased as immersion times were increased; the decrease was significant at longer immersion times (up to 24.47%). Failures evolved with increased immersion times, leading to a greater number of delaminations and more intralaminar cracking. Failure modes, such as crushing and multiple delaminations, were observed at longer immersion times, particularly after 24 and 43 days, where a pure interlaminar shear failure did not occur. The observed transition in failure mechanism showed that failure of aged specimens was triggered by a crushing of the upper surface plies leading to progressive delamination at multiple ply interfaces in the upper half of the specimen. The crushing occurred at a load below that required to initiate a pure shear failure and hence represents an under prediction of the true SBS of the sample. This is a common test used to assess environmental degradation of composites and these results show that conservative knockdown factors may be used in design. AE was able to distinguish different material behaviours prior to final fracture for unaged and aged specimens suggesting that it can be integrated into an aerospace asset management system. AE results were validated using optical measurements and microscopy.

Noise pollution: acute noise exposure increases susceptibility to disease and chronic exposure reduces host survival.

Anthropogenic noise is a pervasive global pollutant that has been detected in every major habitat on the planet. Detrimental impacts of noise pollution on physiology, immunology and behaviour have been shown in terrestrial vertebrates and invertebrates. Equivalent research on aquatic organisms has until recently been stunted by the misnomer of a silent underwater world. In fish, however, noise pollution can lead to stress, hearing loss, behavioural changes and impacted immunity. But, the functional effects of this impacted immunity on disease resistance due to noise exposure have remained neglected. Parasites that cause transmissible disease are key drivers of ecosystem biodiversity and a significant factor limiting the sustainable expansion of the animal trade. Therefore, understanding how a pervasive stressor is impacting host-parasite interactions will have far-reaching implications for global animal health. Here, we investigated the impact of acute and chronic noise on vertebrate susceptibility to parasitic infections, using a model host-parasite system (guppy-Gyrodactylus turnbulli). Hosts experiencing acute noise suffered significantly increased parasite burden compared with those in no noise treatments. By contrast, fish experiencing chronic noise had the lowest parasite burden. However, these hosts died significantly earlier compared with those exposed to acute and no noise treatments. By revealing the detrimental impacts of acute and chronic noise on host-parasite interactions, we add to the growing body of evidence demonstrating a link between noise pollution and reduced animal health.

Phyllotaxis and rhizotaxis in Arabidopsis are modified by three PLETHORA transcription factors.

BACKGROUND: The juxtaposition of newly formed primordia in the root and shoot differs greatly, but their formation in both contexts depends on local accumulation of the signaling molecule auxin. Whether the spacing of lateral roots along the main root and the arrangement of leaf primordia at the plant apex are controlled by related underlying mechanisms has remained unclear. RESULTS: Here, we show that, in Arabidopsis thaliana, three transcriptional regulators implicated in phyllotaxis, PLETHORA3 (PLT3), PLT5, and PLT7, are expressed in incipient lateral root primordia where they are required for primordium development and lateral root emergence. Furthermore, all three PLT proteins prevent the formation of primordia close to one another, because, in their absence, successive lateral root primordia are frequently grouped in close longitudinal or radial clusters. The triple plt mutant phenotype is rescued by PLT-vYFP fusion proteins, which are expressed in the shoot meristem as well as the root, but not by expression of PLT7 in the shoot alone. Expression of all three PLT genes requires auxin response factors ARF7 and ARF19, and the reintroduction of PLT activity suffices to rescue lateral root formation in arf7,arf19. CONCLUSIONS: Intriguingly PLT 3, PLT5, and PLT7 not only control the positioning of organs at the shoot meristem but also in the root; a striking observation that raises many evolutionary questions.

Local auxin biosynthesis regulation by PLETHORA transcription factors controls phyllotaxis in Arabidopsis.

Lateral organ distribution at the shoot apical meristem defines specific and robust phyllotaxis patterns that have intrigued biologists and mathematicians for centuries. In silico studies have revealed that this self-organizing process can be recapitulated by modeling the polar transport of the phytohormone auxin. Phyllotactic patterns change between species and developmental stages, but the processes behind these variations have remained unknown. Here we use regional complementation experiments to reveal that phyllotactic switches in Arabidopsis shoots can be mediated by PLETHORA-dependent control of local auxin biosynthesis.

A PHABULOSA/cytokinin feedback loop controls root growth in Arabidopsis.

The hormone cytokinin (CK) controls root length in Arabidopsis thaliana by defining where dividing cells, derived from stem cells of the root meristem, start to differentiate [1-6]. However, the regulatory inputs directing CK to promote differentiation remain poorly understood. Here, we show that the HD-ZIPIII transcription factor PHABULOSA (PHB) directly activates the CK biosynthesis gene ISOPENTENYL TRANSFERASE 7 (IPT7), thus promoting cell differentiation and regulating root length. We further demonstrate that CK feeds back to repress both PHB and microRNA165, a negative regulator of PHB. These interactions comprise an incoherent regulatory loop in which CK represses both its activator and a repressor of its activator. We propose that this regulatory circuit determines the balance of cell division and differentiation during root development and may provide robustness against CK fluctuations.

Arabidopsis PLETHORA transcription factors control phyllotaxis.

The pattern of plant organ initiation at the shoot apical meristem (SAM), termed phyllotaxis, displays regularities that have long intrigued botanists and mathematicians alike. In the SAM, the central zone (CZ) contains a population of stem cells that replenish the surrounding peripheral zone (PZ), where organs are generated in regular patterns. These patterns differ between species and may change in response to developmental or environmental cues [1]. Expression analysis of auxin efflux facilitators of the PIN-FORMED (PIN) family combined with modeling of auxin transport has indicated that organ initiation is associated with intracellular polarization of PIN proteins and auxin accumulation [2-10]. However, regulators that modulate PIN activity to determine phyllotactic patterns have hitherto been unknown. Here we reveal that three redundantly acting PLETHORA (PLT)-like AP2 domain transcription factors control shoot organ positioning in the model plant Arabidopsis thaliana. Loss of PLT3, PLT5, and PLT7 function leads to nonrandom, metastable changes in phyllotaxis. Phyllotactic changes in plt3plt5plt7 mutants are largely attributable to misregulation of PIN1 and can be recapitulated by reducing PIN1 dosage, revealing that PLT proteins are key regulators of PIN1 activity in control of phyllotaxis.

Evolution and diverse roles of the CUP-SHAPED COTYLEDON genes in Arabidopsis leaf development.

CUP-SHAPED COTYLEDON2 (CUC2) and the interacting microRNA miR164 regulate leaf margin dissection. Here, we further investigate the evolution and the specific roles of the CUC1 to CUC3 genes during Arabidopsis thaliana leaf serration. We show that CUC2 is essential for dissecting the leaves of a wide range of lobed/serrated Arabidopsis lines. Inactivation of CUC3 leads to a partial suppression of the serrations, indicating a role for this gene in leaf shaping. Morphometric analysis of leaf development and genetic analysis provide evidence for different temporal contributions of CUC2 and CUC3. Chimeric constructs mixing CUC regulatory sequences with different coding sequences reveal both redundant and specific roles for the three CUC genes that could be traced back to changes in their expression pattern or protein activity. In particular, we show that CUC1 triggers the formation of leaflets when ectopically expressed instead of CUC2 in the developing leaves. These divergent fates of the CUC1 and CUC2 genes after their formation by the duplication of a common ancestor is consistent with the signature of positive selection detected on the ancestral branch to CUC1. Combining experimental observations with the retraced origin of the CUC genes in the Brassicales, we propose an evolutionary scenario for the CUC genes.

Repression of apical homeobox genes is required for embryonic root development in Arabidopsis.

Development of seed plant embryos is polarized along the apical-basal axis. This polarization occurs in the absence of cell migration and culminates in the establishment of two distinct pluripotent cell populations: the shoot apical meristem (SAM) and root meristem (RM), which postembryonically give rise to the entire shoot and root systems of the plant. The acquisition of genetic pathways that delimit root from shoot during embryogenesis must have played a pivotal role during land plant evolution because roots evolved after shoots in ancestral vascular plants and may be shoot-derived organs. However, such pathways are very poorly understood. Here we show that RM establishment in the model plant Arabidopsis thaliana requires apical confinement of the Class III HOMEODOMAIN-LEUCINE ZIPPER (HD-ZIP III) proteins PHABULOSA (PHB) and PHAVOLUTA (PHV), which direct both SAM development and shoot lateral organ polarity. Failure to restrict PHB and PHV expression apically via a microRNA-dependent pathway prevents correct elaboration of the embryonic root development program and results in embryo lethality. As such, repression of a fundamental shoot development pathway is essential for correct root development. Additionally, our data suggest that a single patterning process, based on HD-ZIP III repression, mediates both apical-basal and radial polarity in the embryo and lateral organ polarity in the shoot.

From genes to shape: regulatory interactions in leaf development.

In the past two years novel connections were described between auxin function and transcription factor patterning systems involved in both leaf initiation and elaboration of leaf axial patterning. A cascade of small RNA-based regulatory steps was suggested to facilitate delimitation of cell types comprising the upper versus lower parts of the leaf. Developmental regulation of cellular growth emerged as a crucial component in regulation of leaf form with TCP and CUC2 transcription factors playing a key role in this process. Finally, cis-regulatory evolution of developmental genes emerged as a process that likely contributed to diversification of leaf form, while studies in seedless land plants have begun to elucidate the ancestral and derived aspects of leaf development pathways.

SERRATE coordinates shoot meristem function and leaf axial patterning in Arabidopsis.

Leaves of flowering plants are determinate organs produced by pluripotent structures termed shoot apical meristems. Once specified, leaves differentiate an adaxial (upper) side specialized for light capture, and an abaxial (lower) side specialized for gas exchange. A functional relationship between meristem activity and the differentiation of adaxial leaf fate has been recognized for over fifty years, but the molecular basis of this interaction is unclear. In Arabidopsis thaliana, activity of the class I KNOX (KNOTTED1-like homeobox) genes SHOOTMERISTEMLESS (STM) and BREVIPEDICELLUS (BP) is required for meristem function but excluded from leaves, whereas members of the HD-Zip III (class III homeodomain leucine zipper) protein family function to promote both meristem activity and adaxial leaf fate. Here we show that the zinc-finger protein SERRATE acts in a microRNA (miRNA) gene-silencing pathway to regulate expression of the HD-Zip III gene PHABULOSA (PHB) while also limiting the competence of shoot tissue to respond to KNOX expression. Thus, SERRATE acts to coordinately regulate meristem activity and leaf axial patterning.

Regulation of Arabidopsis shoot apical meristem and lateral organ formation by microRNA miR166g and its AtHD-ZIP target genes.

Plant development is characterized by precise control of gene regulation, leading to the correct spatial and temporal tissue patterning. We have characterized the Arabidopsis jabba-1D (jba-1D) mutant, which displays multiple enlarged shoot meristems, radialized leaves, reduced gynoecia and vascular defects. The jba-1D meristem phenotypes require WUSCHEL (WUS) activity, and correlate with a dramatic increase in WUS expression levels. We demonstrate that the jba-1D phenotypes are caused by over-expression of miR166g, and require the activity of the RNase III helicase DCL1. miR166g over-expression in jba-1D plants affects the transcripts of several class III homeodomain-leucine zipper (AtHD-ZIP) family target genes. The expression of PHABULOSA (PHB), PHAVOLUTA (PHV) and CORONA (CNA) is significantly reduced in a jba-1D background, while REVOLUTA (REV) expression is elevated and ATHB8 is unchanged. In addition, we show that miR166 has a dynamic expression pattern in wild-type and jba-1D embryos. Our analysis demonstrates an indirect role for miRNAs in controlling meristem formation via regulation of WUS expression, and reveals complex regulation of the class III AtHD-ZIP gene family.

The formation and patterning of leaves: recent advances.

Leaves, the plant's major photosynthetic organs, form through the activity of groups of pluripotent cells, termed shoot apical meristems (SAMs), located at the growing tips of plants. Leaves develop with a dorso-ventral asymmetry, with the adaxial surface adjacent to the meristem and the abaxial surface developing at a distance from it. Molecular genetic studies have shown that the correct specification of adaxial/abaxial polarity requires communication between the incipient leaf and the meristem, and that the juxtaposition of adaxial/abaxial fates is necessary for lamina outgrowth (Waites and Hudson 1995; McConnell et al. 2001). Over the last few years, a number of factors that control cell fate specification in the apex have been identified. This review will focus on recent advances on distinct but overlapping aspects of leaf development, namely, the transition from meristem to leaf fate and the specification of abaxial/adaxial polarity and its possible role in leaf growth.