A robust multi-residue method for the monitoring of 25 endocrine disruptors at ultra-trace levels in surface waters by SPE-LC-MS/MS.

Estrogenic endocrine disruptors are one of the biggest ecotoxicological threats in water that pose a significant ecological burden and health-risk for humans due to their high biological activity and proven additive effects. Therefore, we have developed and validated the most comprehensive and ultra-sensitive analytical method published to date, for reliable quantification of 25 high-risk endocrine disruptors at their ecologically relevant concentrations: naturally excreted hormones (estradiol, estrone, estriol, testosterone, corticosterone, and progesterone), synthetic hormones used for contraception and menopausal symptoms (ethinylestradiol, drospirenone, chlormadinone acetate, norgestrel, gestodene, tibolone, norethindrone, dienogest, and cyproterone) and bisphenols (BPS, BPA, BPF, BPE, BPAF, BPB, BPC, and BPZ). It is based on a solid-phase extraction of water samples, followed by a robust dansyl chloride derivatization with detection by liquid chromatography-tandem mass spectrometry with a single sample preparation and two analytical methods using the same analytical column and mobile phases. The achieved limits of quantitation are in the sub-ng L-1 range, and detection limits as low as 0.02 ng L-1, meeting the newest proposal for environmental quality standards (EQS) by the EU water framework directive for estradiol and ethinylestradiol. The method was extensively validated and applied to seven representative Slovenian water samples, where we detected 21 out of 25 analytes; 13 were quantified in at least one sample. Estrone and progesterone were quantified in all samples, reaching levels up to 50 ng L-1; ethinylestradiol was higher than the current EQS (0.035 ng L-1) in three samples, and estradiol was above its EQS (0.4 ng L-1) in one sample, proving the method's applicability and the necessity for monitoring these pollutants.

Estrogenic potency of endocrine disrupting chemicals and their mixtures detected in environmental waters and wastewaters.

Endocrine disrupting chemicals such as natural and synthetic steroid hormones and bisphenols are among the most important pollutants in the aquatic environment. We performed an environmental chemical analysis of five Slovenian water samples, two rivers, one groundwater, and the influent and effluent of wastewater treatment plants, with a highly sensitive analysis of twenty-five endocrine-disrupting compounds belonging to the groups of natural hormones, synthetic hormones, and bisphenols. Since these compounds are simultaneously present in the environment, it is important to study their individual effects as well as the effects of mixtures. We investigated in vitro the estrogenic potency of selected natural and synthetic steroid hormones and bisphenols detected in surface, ground and waste water in Slovenia using the OECD-validated transactivation assay on the cell line Hela9903. We predicted their mixture effects using the concentration addition model and compared them with experimentally determined values. Two mixing designs were used: a balanced design in which chemicals were combined in proportion to their individual EC50 values, and an unbalanced design with compounds in proportion to their measured concentrations in the environmental samples. The estrogenic effects of the experimental mixtures followed the concentration addition model. Real water samples exhibited weaker estrogenic effects, showing the great heterogeneity of the real water samples.

Multi-parameter risk assessment of forty-one selected substances with endocrine disruptive properties in surface waters worldwide.

The increasing use of substances with endocrine disruptive properties (EDs) not only impacts aquatic organisms but can also have a direct negative effect on human health. In this comprehensive worldwide review, we collected ecotoxicology and concentration data observed in surface water for 53 high-potency EDs and performed a risk assessment. The compounds were selected from the EU watchlist of priority substances, expanded with new compounds of emerging concern (total 41), where quantifiable data were available for the past three years (2018-2020). The risk quotients ranged from <0.01 for 22 substances to 1974 for tamoxifen. The frequency of samples in which the predicted no-effect concentrations were exceeded also varied, from 1.8% to 92.7%. By using the comprehensive multi-parameter risk assessment in our study, the most current to date, we determined that tamoxifen, imidacloprid, clothianidin, four bisphenols (BPA, BPF, BPS, and BPAF), PFOA, amoxicillin, and three steroid hormones (estriol, estrone, and cyproterone) pose significant risks in the environment. Comparing two structurally very similar bisphenols, BPA and BPB, suggested that the risk from BPB is currently underestimated by at least four orders of magnitude due to the lack of ecotoxicological data availability. The methodological limitations encountered suggest that a standardized methodology for data selection and assessment is necessary, highlighting the fact that some substances are currently under-represented in the field of ecotoxicological research. A new prioritization system is therefore presented, which provides a potential basis for new substances to be included in environmental monitoring lists.

A comprehensive approach for the simultaneous analysis of all main water-soluble vitamins in multivitamin preparations by a stability-indicating HPLC-DAD method.

A stability-indicating HPLC-DAD method for simultaneous determination of all nine main water-soluble vitamins, in addition to two commonly used vitamers, was developed and fully validated in analytical ranges, adjusted to their recommended dietary allowance values. An XSelect CSH C18 column with gradient elution using phosphate buffer and methanol was used for their optimal separation. The results from forced degradation studies along with peak purity tests and response ratios at dual wavelengths for the individual vitamins in all tested samples confirmed the method's stability-indicative nature. The complete developed methodology, including a single sample preparation for the vitamins simultaneous analysis, was applied to their assay in 13 commercial multivitamin preparations, revealing mostly higher amounts than the label claims. The developed method is applicable for stability testing, multivitamin products shelf-life determination as well as routine assay analysis of all water-soluble vitamins in their most common forms, including the analytically most demanding flavin mononucleotide.