Multi-scale time-resolved electron diffraction: A case study in moiré materials.

Ultrafast-optical-pump - structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We deploy a hybrid pixel array direct electron detector to perform ultrafast electron diffraction experiments on a WSe2/MoSe2 2D heterobilayer, resolving the weak features of diffuse scattering and moiré superlattice structure without saturating the zero order peak. Enabled by the detector's high frame rate, we show that a chopping technique provides diffraction difference images with signal-to-noise at the shot noise limit. Finally, we demonstrate that a fast detector frame rate coupled with a high repetition rate probe can provide continuous time resolution from femtoseconds to seconds, enabling us to perform a scanning ultrafast electron diffraction experiment that maps thermal transport in WSe2/MoSe2 and resolves distinct diffusion mechanisms in space and time.

Question prompts to empower cancer patients: results of a randomized controlled trial.

OBJECTIVE: In addition to question prompts for information transfer, we also used prompts to facilitate the expression of emotions. Our aim was to investigate how a question prompt list (QPL) is accepted by patients and whether it enhances interactional empowerment of the patients in the consultation with the radio-oncological treatment team before the beginning of radiotherapy. METHODOLOGY: Adult cancer patients before the beginning of radiotherapy were randomly assigned to the intervention group (IG) or control group (CG). The patients in the IG received a QPL with predefined subsets and subject areas. After the physician's consultation, both groups completed a self-developed, content validated questionnaire on interactional empowerment. The IG evaluated the QPL using a self-developed instrument. RESULT: A total of 279 adult cancer patients participated in the study (IG n = 139/CG n = 140). The participants of the IG reported a significantly higher interactional empowerment compared with those of the CG (t(277) = - 2.71, p = .007, 95% CI [- 1.61, - 0.26], d = 0.29). 60.4% of the IG agreed "rather" or "very" that they used the QPL in consultation with the medical team. CONCLUSION: The QPL used in the consultation improved the self-assessed competence for interaction with the medical team and strengthened the interactional empowerment. The QPL was well accepted by the patients and is to be introduced into a routine as a practicable and simple instrument in the future. The support of patients in addressing concerns and fears is an important innovation.

Experimental 3D coherent diffractive imaging from photon-sparse random projections.

The routine atomic resolution structure determination of single particles is expected to have profound implications for probing structure-function relationships in systems ranging from energy-storage materials to biological molecules. Extremely bright ultrashort-pulse X-ray sources - X-ray free-electron lasers (XFELs) - provide X-rays that can be used to probe ensembles of nearly identical nanoscale particles. When combined with coherent diffractive imaging, these objects can be imaged; however, as the resolution of the images approaches the atomic scale, the measured data are increasingly difficult to obtain and, during an X-ray pulse, the number of photons incident on the 2D detector is much smaller than the number of pixels. This latter concern, the signal 'sparsity', materially impedes the application of the method. An experimental analog using a conventional X-ray source is demonstrated and yields signal levels comparable with those expected from single biomolecules illuminated by focused XFEL pulses. The analog experiment provides an invaluable cross check on the fidelity of the reconstructed data that is not available during XFEL experiments. Using these experimental data, it is established that a sparsity of order 1.3 × 10-3 photons per pixel per frame can be overcome, lending vital insight to the solution of the atomic resolution XFEL single-particle imaging problem by experimentally demonstrating 3D coherent diffractive imaging from photon-sparse random projections.

Intermittent plasticity in individual grains: A study using high energy x-ray diffraction.

Long-standing evidence suggests that plasticity in metals may proceed in an intermittent fashion. While the documentation of intermittency in plastically deforming materials has been achieved in several experimental settings, efforts to draw connections from dislocation motion and structure development to stress relaxation have been limited, especially in the bulk of deforming polycrystals. This work uses high energy x-ray diffraction measurements to build these links by characterizing plastic deformation events inside individual deforming grains in both the titanium alloy, Ti-7Al, and the magnesium alloy, AZ31. This analysis is performed by combining macroscopic stress relaxation data, complete grain stress states found using far-field high energy diffraction microscopy, and rapid x-ray diffraction spot measurements made using a Mixed-Mode Pixel Array Detector. Changes in the dislocation content within the deforming grains are monitored using the evolution of the full 3-D shapes of the diffraction spot intensity distributions in reciprocal space. The results for the Ti-7Al alloy show the presence of large stress fluctuations in contrast to AZ31, which shows a lesser degree of intermittent plastic flow.

X-ray reflectivity measurement of interdiffusion in metallic multilayers during rapid heating.

A technique for measuring interdiffusion in multilayer materials during rapid heating using X-ray reflectivity is described. In this technique the sample is bent to achieve a range of incident angles simultaneously, and the scattered intensity is recorded on a fast high-dynamic-range mixed-mode pixel array detector. Heating of the multilayer is achieved by electrical resistive heating of the silicon substrate, monitored by an infrared pyrometer. As an example, reflectivity data from Al/Ni heated at rates up to 200 K s-1 are presented. At short times the interdiffusion coefficient can be determined from the rate of decay of the reflectivity peaks, and it is shown that the activation energy for interdiffusion is consistent with a grain boundary diffusion mechanism. At longer times the simple analysis no longer applies because the evolution of the reflectivity pattern is complicated by other processes, such as nucleation and growth of intermetallic phases.

Volume of Larvae Is the Most Important Single Predictor of Mass Temperatures in the Forensically Important Calliphorid, Chrysomya megacephala (Diptera: Calliphoridae).

Calliphorid species form larval aggregations that are capable of generating heat above ambient temperature. We wanted to determine the relationship between volume, number of larvae, and different combinations of instars on larval mass heat generation. We compared different numbers of Chrysomya megacephala (F.) larvae (40, 100, 250, 600, and 2,000), and different combinations of instars (∼50/50 first and second instars, 100% second instars, ∼50/50 second and third instars, and 100% third instars) at two different ambient temperatures (20 and 30 °C). We compared 13 candidate multiple regression models that were fitted to the data; the models were then scored and ranked with Akaike information criterion and Bayesian information criterion. The results indicate that although instar, age, treatment temperature, elapsed time, and number of larvae in a mass were significant, larval volume was the best predictor of larval mass temperatures. The volume of a larval mass may need to be taken into consideration for determination of a postmortem interval.

Development of the Oriental Latrine Fly, Chrysomya megacephala (Diptera: Calliphoridae), at Five Constant Temperatures.

Chrysomya megacephala (Fabricius) is a forensically important fly that is found throughout the tropics and subtropics. We calculated the accumulated development time and transition points for each life stage from eclosion to adult emergence at five constant temperatures: 15, 20, 25, 30, and 35 °C. For each transition, the 10th, 50th, and 90th percentiles were calculated with a logistic linear model. The mean transition times and % survivorship were determined directly from the raw laboratory data. Development times of C. megacephala were compared with that of two other closely related species, Chrysomya rufifacies (Macquart) and Phormia regina (Meigen). Ambient and larval mass temperatures were collected from field studies conducted from 2001-2004. Field study data indicated that adult fly activity was reduced at lower ambient temperatures, but once a larval mass was established, heat generation occurred. These development times and durations can be used for estimation of a postmortem interval (PMI).

Time-resolved x-ray diffraction techniques for bulk polycrystalline materials under dynamic loading.

We have developed two techniques for time-resolved x-ray diffraction from bulk polycrystalline materials during dynamic loading. In the first technique, we synchronize a fast detector with loading of samples at strain rates of ~10(3)-10(4) s(-1) in a compression Kolsky bar (split Hopkinson pressure bar) apparatus to obtain in situ diffraction patterns with exposures as short as 70 ns. This approach employs moderate x-ray energies (10-20 keV) and is well suited to weakly absorbing materials such as magnesium alloys. The second technique is useful for more strongly absorbing materials, and uses high-energy x-rays (86 keV) and a fast shutter synchronized with the Kolsky bar to produce short (~40 µs) pulses timed with the arrival of the strain pulse at the specimen, recording the diffraction pattern on a large-format amorphous silicon detector. For both techniques we present sample data demonstrating the ability of these techniques to characterize elastic strains and polycrystalline texture as a function of time during high-rate deformation.

[How does our specialty present itself on the Internet?]. / Wie präsentiert sich unser Fachgebiet im Internet?

BACKGROUND: The huge amount of information on the internet about orthopaedic and trauma surgical issues is very often unclear and hard to control in reliability, autonomy and expertise. The aim of this work is to evaluate German-speaking internet sites with orthopaedic and trauma surgical contents. MATERIAL AND METHODS: Over a period of two months (from May to June) in 2012 different websites about 20 common orthopaedic and trauma surgical diseases were analysed on the internet by Google search engine. The first ten search results were evaluated for the HON code principles (Health On the Net Foundation). Furthermore there was an evaluation about qualification of the first 50 websites. The best 1,000 placed websites on Google were analysed for the authoritative value: academic, commercial, media, non-medical, physicians, non-profit and miscellaneous. RESULTS: Only 194 from 200 websites could be evaluated by the HON code principles. Overall 188 websites complied the principle of transparency, followed by privacy with 150 sites and authoritative with 134 sites. Only 90 websites give information about financial disclosure. Medical articles of the website Wikipedia appear most frequently. In the second part of this work it is shown that non-profit sites and sites by physicians are the most frequent. The fewest results are given by academic and commercial sites with 93 and 85 online hits. CONCLUSION: In summary, it is shown that most of the websites about medical information have inadequate quality. This statement is in accord with some U. S. American publications. It is clear that Wikipedia has a top-ranking on the internet when it is about medical information. Wikipedia almost achieves all of the HON code principles. It is possible to give better medical online information about orthopaedic and trauma surgical issues published by professionals.

A high-speed area detector for novel imaging techniques in a scanning transmission electron microscope.

A scanning transmission electron microscope (STEM) produces a convergent beam electron diffraction pattern at each position of a raster scan with a focused electron beam, but recording this information poses major challenges for gathering and storing such large data sets in a timely manner and with sufficient dynamic range. To investigate the crystalline structure of materials, a 16x16 analog pixel array detector (PAD) is used to replace the traditional detectors and retain the diffraction information at every STEM raster position. The PAD, unlike a charge-coupled device (CCD) or photomultiplier tube (PMT), directly images 120-200keV electrons with relatively little radiation damage, exhibits no afterglow and limits crosstalk between adjacent pixels. Traditional STEM imaging modes can still be performed by the PAD with a 1.1kHz frame rate, which allows post-acquisition control over imaging conditions and enables novel imaging techniques based on the retained crystalline information. Techniques for rapid, semi-automatic crystal grain segmentation with sub-nanometer resolution are described using cross-correlation, sub-region integration, and other post-processing methods.

On the atomic structure of liquid Ni-Si alloys: a neutron diffraction study.

The atomic structure of the liquid NiSi and NiSi(2) alloys is investigated by means of neutron diffraction experiments with isotopic substitution. From experimental data-sets obtained using four Ni isotopes, partial structure factors and pair correlation functions are obtained by applying a reverse Monte Carlo modelling approach. Both alloys were found to exhibit a strong tendency to hetero-coordination within the first coordination shell. In particular, covalent Si-Si bonds with somewhat greater distances seem to influence the structure of the liquid NiSi alloy.

Segregation and temperature effect on the atomic structure of Bi(30)Ga(70) liquid alloy.

We investigate the structure of liquid monotectic alloy Bi(30)Ga(70) above and below the critical point. The three-dimensional structure at 265 °C is modelled by means of the reverse Monte Carlo simulation technique using neutron and x-ray diffraction experimental data. It is shown that atomic segregation on the short-range scale exists in the liquid Bi(30)Ga(70) slightly above the critical temperature (T(C) = 262 °C). We present also the structure factors of Bi(30)Ga(70) liquid alloy under the critical point at 240 and 230 °C obtained with neutron diffraction to highlight the temperature effect in the atomic structure.

Microscopic structure and dynamics of molten Se50Te50 alloys.

In this work we investigate the microscopic structure and dynamics of the molten equimolar alloy, Se(50)Te(50) using a combination of neutron and x-ray diffraction experiments, reverse Monte Carlo analysis, and first principles molecular dynamics. The range of temperatures studied covers the semiconductor/metal transition. From our results it can be seen that the latter is associated with an increase in coordination numbers and a reduced tendency to heterocoordination. In agreement with previous inelastic neutron scattering experiments, our molecular dynamics calculation predict a certain widening of the stretching vibrational modes band in connection with the increase of coordination and the presence of longer bonds in the metallic phase.

Thermoregulation in larval aggregations of carrion-feeding blow flies (Diptera: Calliphoridae).

The growth and development of carrion-feeding calliphorid (Diptera: Calliphoridae) larvae, or maggots, is of great interest to forensic sciences, especially for estimation of a postmortem interval (PMI). The development rate of calliphorid larvae is influenced by the temperature of their immediate environment. Heat generation in larval feeding aggregations (=maggot masses) is a well-known phenomenon, but it has not been quantitatively described. Calculated development rates that do not include internally generated temperatures will result in overestimation of PMI. Over a period of 2.5 yr, 80 pig, Sus scrofa L., carcasses were placed out at study sites in north central Florida and northwestern Indiana. Once larval aggregations started to form, multiple internal and external temperatures, and weather observations were taken daily or every few days between 1400 and 1800 hours until pupation of the larvae. Volume of each aggregation was determined by measuring surface area and average depth. Live and preserved samples of larvae were taken for species identification. The four most common species collected were Lucilia coeruleiviridis (=Phaenicia) (Macquart) (77%), Cochliomyia macellaria (F.) (8.3%), Chrysomya rufifaces (Macquart) (7.7%), and Phormnia regina (Meigen) (5.5%). Statistical analyses showed that 1) volume of a larval mass had a strong influence on its temperature, 2) internal temperatures of masses on the ground were influenced by soil temperature and mass volume, 3) internal temperatures of masses smaller than 20 cm3 were influenced by ambient air temperature and mass volume, and 4) masses larger than 20 cm3 on the carcass had strongly regulated internal temperatures determined only by the volume of the mass, with larger volumes associated with higher temperatures. Nonsignificant factors included presence of rain or clouds, shape of the aggregation, weight of the carcass, species composition of the aggregation, time since death, or season.

Atomic structure of As(25)Si(40)Te(35) glass.

Glassy As(25)Si(40)Te(35) has been studied by x-ray and neutron diffraction as well as x-ray absorption spectroscopy (EXAFS) at As and Te K-edges. Simultaneous modelling of the four independent measurements by means of the reverse Monte Carlo (RMC) simulation technique allowed the separation of partial pair distribution functions and estimation of the corresponding coordination numbers. It is shown that the atomic structure of As(25)Si(40)Te(35) glass can be presented as a three-dimensional network of twofold coordinated Te, threefold coordinated As and fourfold coordinated Si atoms.

Analog pixel array detectors.

X-ray pixel array detectors (PADs) are generally thought of as either digital photon counters (DPADs) or X-ray analog-integrating pixel array detectors (APADs). Experiences with APADs, which are especially well suited for X-ray imaging experiments where transient or high instantaneous flux events must be recorded, are reported. The design, characterization and experimental applications of several APAD designs developed at Cornell University are discussed. The simplest design is a ;flash' architecture, wherein successive integrated X-ray images, as short as several hundred nanoseconds in duration, are stored in the detector chips for later off-chip digitization. Radiography experiments using a prototype flash APAD are summarized. Another design has been implemented that combines flash capability with the ability to continuously stream X-ray images at slower (e.g. milliseconds) rates. Progress is described towards radiation-hardened APADs that can be tiled to cover a large area. A mixed-mode PAD, design by combining many of the attractive features of both APADs and DPADs, is also described.

Capsaicin regulates voltage-dependent sodium channels by altering lipid bilayer elasticity.

At submicromolar concentrations, capsaicin specifically activates the TRPV1 receptor involved in nociception. At micro- to millimolar concentrations, commonly used in clinical and in vitro studies, capsaicin also modulates the function of a large number of seemingly unrelated membrane proteins, many of which are similarly modulated by the capsaicin antagonist capsazepine. The mechanism(s) underlying this widespread regulation of protein function are not understood. We investigated whether capsaicin could regulate membrane protein function by changing the elasticity of the host lipid bilayer. This was done by studying capsaicin's effects on lipid bilayer stiffness, measured using gramicidin A (gA) channels as molecular force-transducers, and on voltage-dependent sodium channels (VDSC) known to be regulated by bilayer elasticity. Capsaicin and capsazepine (10-100 microM) increase gA channel appearance rate and lifetime without measurably altering bilayer thickness or channel conductance, meaning that the changes in bilayer elasticity are sufficient to alter the conformation of an embedded protein. Capsaicin and capsazepine promote VDSC inactivation, similar to other amphiphiles that decrease bilayer stiffness, producing use-dependent current inhibition. For capsaicin, the quantitative relation between the decrease in bilayer stiffness and the hyperpolarizing shift in inactivation conforms to that previously found for other amphiphiles. Capsaicin's effects on gA channels and VDSC are similar to those of Triton X-100, although these amphiphiles promote opposite lipid monolayer curvature. We conclude that capsaicin can regulate VDSC function by altering bilayer elasticity. This mechanism may underlie the promiscuous regulation of membrane protein function by capsaicin and capsazepine-and by amphiphilic drugs generally.

Mesophase structure-mechanical and ionic transport correlations in extended amphiphilic dendrons.

We have studied the self-assembly of amphiphilic dendrons extended with linear polyethylene oxide (PEO) chains and their ion complexes. Keeping the dendron core and linear PEO chain compatible allows for the combination of dendritic core-shell and conventional blockcopolymer characteristics for complex mesophase behavior. An unexpected sequence of crystalline lamellar, cubic micellar (Pm3n), hexagonal columnar, continuous cubic (Ia3d), and lamellar mesophases is observed. Multiple phase behavior within single compounds allows for the study of charge transport and mechanical property correlations as a function of structure. The results suggest an advanced molecular design concept for the next generation of nanostructured materials in applications involving charge transport.

Imaging density disturbances in water with a 41.3-attosecond time resolution.

We show that the momentum flexibility of inelastic x-ray scattering may be exploited to invert its loss function, allowing real time imaging of density disturbances in a medium. We show the disturbance arising from a point source in liquid water, with a resolution of 41.3 attoseconds (4.13 x 10(-17) s) and 1.27 A (1.27 x 10(-8) cm). This result is used to determine the structure of the electron cloud around a photoexcited chromophore in solution, as well as the wake generated in water by a 9 MeV gold ion. We draw an analogy with pump-probe techniques and suggest that energy-loss scattering may be applied more generally to the study of attosecond phenomena.