In-plane quasi-single-domain BaTiO3 via interfacial symmetry engineering.

The control of the in-plane domain evolution in ferroelectric thin films is not only critical to understanding ferroelectric phenomena but also to enabling functional device fabrication. However, in-plane polarized ferroelectric thin films typically exhibit complicated multi-domain states, not desirable for optoelectronic device performance. Here we report a strategy combining interfacial symmetry engineering and anisotropic strain to design single-domain, in-plane polarized ferroelectric BaTiO3 thin films. Theoretical calculations predict the key role of the BaTiO3/PrScO3 [Formula: see text] substrate interfacial environment, where anisotropic strain, monoclinic distortions, and interfacial electrostatic potential stabilize a single-variant spontaneous polarization. A combination of scanning transmission electron microscopy, piezoresponse force microscopy, ferroelectric hysteresis loop measurements, and second harmonic generation measurements directly reveals the stabilization of the in-plane quasi-single-domain polarization state. This work offers design principles for engineering in-plane domains of ferroelectric oxide thin films, which is a prerequisite for high performance optoelectronic devices.

Low-Voltage Domain-Wall LiNbO3 Memristors.

Application of conducting ferroelectric domain walls (DWs) as functional elements may facilitate development of conceptually new resistive switching devices. In a conventional approach, several orders of magnitude change in resistance can be achieved by controlling the DW density using supercoercive voltage. However, a deleterious characteristic of this approach is high-energy cost of polarization reversal due to high leakage current. Here, we demonstrate a new approach based on tuning the conductivity of DWs themselves rather than on domain rearrangement. Using LiNbO3 capacitors with graphene, we show that resistance of a device set to a polydomain state can be continuously tuned by application of subcoercive voltage. The tuning mechanism is based on the reversible transition between the conducting and insulating states of DWs. The developed approach allows an energy-efficient control of resistance without the need for domain structure modification. The developed memristive devices are promising for multilevel memories and neuromorphic computing applications.

Domain wall conductivity in semiconducting hexagonal ferroelectric TbMnO3 thin films.

Although enhanced conductivity of ferroelectric domain boundaries has been found in BiFeO3 and Pb(Zr,Ti)O3 films as well as hexagonal rare-earth manganite single crystals, the mechanism of the domain wall conductivity is still under debate. Using conductive atomic force microscopy, we observe enhanced conductance at the electrically-neutral domain walls in semiconducting hexagonal ferroelectric TbMnO3 thin films where the structure and polarization direction are strongly constrained along the c-axis. This result indicates that domain wall conductivity in ferroelectric rare-earth manganites is not limited to charged domain walls. We show that the observed conductivity in the TbMnO3 films is governed by a single conduction mechanism, namely, the back-to-back Schottky diodes tuned by the segregation of defects.

Emergence of room-temperature ferroelectricity at reduced dimensions.

The enhancement of the functional properties of materials at reduced dimensions is crucial for continuous advancements in nanoelectronic applications. Here, we report that the scale reduction leads to the emergence of an important functional property, ferroelectricity, challenging the long-standing notion that ferroelectricity is inevitably suppressed at the scale of a few nanometers. A combination of theoretical calculations, electrical measurements, and structural analyses provides evidence of room-temperature ferroelectricity in strain-free epitaxial nanometer-thick films of otherwise nonferroelectric strontium titanate (SrTiO3). We show that electrically induced alignment of naturally existing polar nanoregions is responsible for the appearance of a stable net ferroelectric polarization in these films. This finding can be useful for the development of low-dimensional material systems with enhanced functional properties relevant to emerging nanoelectronic devices.

Effect of epitaxial strain on tunneling electroresistance in ferroelectric tunnel junctions.

We report the effect of compressive strain on the tunneling electroresistance (TER) effect in BaTiO3/SrRuO3 (BTO/SRO) heterostructures. We find that epitaxial strain imposed by the mismatch of NdGaO3 and SrTiO3 lattice parameters with the BTO and SRO layers improves ferroelectric polarization of BTO and concurrently promotes the metallicity of the SRO films. While the enhanced polarization is beneficial for the TER magnitude, the reduced asymmetry in the tunneling barrier due to the shortened screening length of SRO is detrimental for the effect. Thus, a combined effect of strain on the polarization of the ferroelectric barrier and the screening properties of the electrodes needs to be taken into account when considering and predicting the TER effect in ferroelectric tunnel junctions.

Mechanical Tuning of LaAlO3/SrTiO3 Interface Conductivity.

In recent years, complex-oxide heterostructures and their interfaces have become the focus of significant research activity, primarily driven by the discovery of emerging states and functionalities that open up opportunities for the development of new oxide-based nanoelectronic devices. The highly conductive state at the interface between insulators LaAlO3 and SrTiO3 is a prime example of such emergent functionality, with potential application in high electron density transistors. In this report, we demonstrate a new paradigm for voltage-free tuning of LaAlO3/SrTiO3 (LAO/STO) interface conductivity, which involves the mechanical gating of interface conductance through stress exerted by the tip of a scanning probe microscope. The mechanical control of channel conductivity and the long retention time of the induced resistance states enable transistor functionality with zero gate voltage.

Ferroelectric tunnel junctions with graphene electrodes.

Polarization-driven resistive switching in ferroelectric tunnel junctions (FTJs)--structures composed of two electrodes separated by an ultrathin ferroelectric barrier--offers new physics and materials functionalities, as well as exciting opportunities for the next generation of non-volatile memories and logic devices. Performance of FTJs is highly sensitive to the electrical boundary conditions, which can be controlled by electrode material and/or interface engineering. Here, we demonstrate the use of graphene as electrodes in FTJs that allows control of interface properties for significant enhancement of device performance. Ferroelectric polarization stability and resistive switching are strongly affected by a molecular layer at the graphene/BaTiO3 interface. For the FTJ with the interfacial ammonia layer we find an enhanced tunnelling electroresistance (TER) effect of 6 × 10(5)%. The obtained results demonstrate a new approach based on using graphene electrodes for interface-facilitated polarization stability and enhancement of the TER effect, which can be exploited in the FTJ-based devices.

High-symmetry polarization domains in low-symmetry ferroelectrics.

We present experimental evidence for polygonal domain faceting in the ferroelectric polymer poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) films with the lower orthorhombic crystallographic symmetry. It is proposed that this effect can arise from purely electrostatic depolarizing forces. We show that, in contrast to magnetic bubble shape domains, where such type of deformation instability has a predominantly elliptical character, the emergence of more symmetrical circular harmonics is favored in ferroelectrics with high dielectric constants.

Enhanced tunnelling electroresistance effect due to a ferroelectrically induced phase transition at a magnetic complex oxide interface.

The range of recently discovered phenomena in complex oxide heterostructures, made possible owing to advances in fabrication techniques, promise new functionalities and device concepts. One issue that has received attention is the bistable electrical modulation of conductivity in ferroelectric tunnel junctions (FTJs) in response to a ferroelectric polarization of the tunnelling barrier, a phenomenon known as the tunnelling electroresistance (TER) effect. Ferroelectric tunnel junctions with ferromagnetic electrodes allow ferroelectric control of the tunnelling spin polarization through the magnetoelectric coupling at the ferromagnet/ferroelectric interface. Here we demonstrate a significant enhancement of TER due to a ferroelectrically induced phase transition at a magnetic complex oxide interface. Ferroelectric tunnel junctions consisting of BaTiO3 tunnelling barriers and La(0.7)Sr(0.3)MnO3 electrodes exhibit a TER enhanced by up to ~10,000% by a nanometre-thick La(0.5)Ca(0.5)MnO3 interlayer inserted at one of the interfaces. The observed phenomenon originates from the metal-to-insulator phase transition in La(0.5)Ca(0.5)MnO3, driven by the modulation of carrier density through ferroelectric polarization switching. Electrical, ferroelectric and magnetoresistive measurements combined with first-principles calculations provide evidence for a magnetoelectric origin of the enhanced TER, and indicate the presence of defect-mediated conduction in the FTJs. The effect is robust and may serve as a viable route for electronic and spintronic applications.

Mechanically-induced resistive switching in ferroelectric tunnel junctions.

Recent advances in atomic-precision processing of oxide ferroelectrics-materials with a stable polarization that can be switched by an external electric field-have generated considerable interest due to rich physics associated with their fundamental properties and high potential for application in devices with enhanced functionality. One of the particularly promising phenomena is the tunneling electroresistance (TER) effect-polarization-dependent bistable resistance behavior of ferroelectric tunnel junctions (FTJ). Conventionally, the application of an electric field above the coercive field of the ferroelectric barrier is required to observe this phenomenon. Here, we report a mechanically induced TER effect in ultrathin ferroelectric films of BaTiO(3) facilitated by a large strain gradient induced by a tip of a scanning probe microscope (SPM). The obtained results represent a new paradigm for voltage-free control of electronic properties of nanoscale ferroelectrics and, more generally, complex oxide materials.

Ferroelectric tunnel memristor.

Strong interest in resistive switching phenomena is driven by a possibility to develop electronic devices with novel functional properties not available in conventional systems. Bistable resistive devices are characterized by two resistance states that can be switched by an external voltage. Recently, memristors-electric circuit elements with continuously tunable resistive behavior-have emerged as a new paradigm for nonvolatile memories and adaptive electronic circuit elements. Employment of memristors can radically enhance the computational power and energy efficiency of electronic systems. Most of the existing memristor prototypes involve transition metal oxide resistive layers where conductive filaments formation and/or the interface contact resistance control the memristive behavior. In this paper, we demonstrate a new type of memristor that is based on a ferroelectric tunnel junction, where the tunneling conductance can be tuned in an analogous manner by several orders of magnitude by both the amplitude and the duration of the applied voltage. The ferroelectric tunnel memristors exhibit a reversible hysteretic nonvolatile resistive switching with a resistance ratio of up to 10(5) % at room temperature. The observed memristive behavior is attributed to the field-induced charge redistribution at the ferroelectric/electrode interface, resulting in the modulation of the interface barrier height.

Mechanical writing of ferroelectric polarization.

Ferroelectric materials are characterized by a permanent electric dipole that can be reversed through the application of an external voltage, but a strong intrinsic coupling between polarization and deformation also causes all ferroelectrics to be piezoelectric, leading to applications in sensors and high-displacement actuators. A less explored property is flexoelectricity, the coupling between polarization and a strain gradient. We demonstrate that the stress gradient generated by the tip of an atomic force microscope can mechanically switch the polarization in the nanoscale volume of a ferroelectric film. Pure mechanical force can therefore be used as a dynamic tool for polarization control and may enable applications in which memory bits are written mechanically and read electrically.

Switchable induced polarization in LaAlO3/SrTiO3 heterostructures.

Demonstration of a tunable conductivity of the LaAlO(3)/SrTiO(3) interfaces drew significant attention to the development of oxide electronic structures where electronic confinement can be reduced to the nanometer range. While the mechanisms for the conductivity modulation are quite different and include metal-insulator phase transition and surface charge writing, generally it is implied that this effect is a result of electrical modification of the LaAlO(3) surface (either due to electrochemical dissociation of surface adsorbates or free charge deposition) leading to the change in the two-dimensional electron gas (2DEG) density at the LaAlO(3)/SrTiO(3) (LAO/STO) interface. In this paper, using piezoresponse force microscopy we demonstrate a switchable electromechanical response of the LAO overlayer, which we attribute to the motion of oxygen vacancies through the LAO layer thickness. These electrically induced reversible changes in bulk stoichiometry of the LAO layer are a signature of a possible additional mechanism for nanoscale oxide 2DEG control on LAO/STO interfaces.

Enhancement of ferroelectric polarization stability by interface engineering.

By using theoretical predictions based on first-principle calculations, we explore an interface engineering approach to stabilize polarization states in ferroelectric heterostructures with a thickness of just several nanometers.

Domain wall propagation in meso- and nanoscale ferroelectrics.

As part of an ongoing programme to evaluate the extent to which external morphology alters domain wall mobility in ferroelectrics, the electrical switching characteristics of single-crystal BaTiO(3) nanorods and thin film plates have been measured and compared. It was found that ferroelectric nanorods were more readily switched than thin plates; increasing the shape constraint therefore appears to enhance switchability. This observation is broadly consistent with previous work, in which local notches patterned along the length of nanorods enhanced switching (McMillen et al 2010 Appl. Phys. Lett. 96 042904), while antinotches had the opposite effect (McQuaid et al 2010 Nano Lett. 10 3566). In this prior work, local enhancement and denudation of the electric field was expected at the notch and antinotch sites, respectively, and this was thought to be the reason for the differences in switching behaviour observed. However, for the simple nanorods and plates investigated here, no differences in the electric field distributions are expected. To rationalise the functional measurements, domain development during switching was imaged directly by piezoresponse force microscopy. A two-stage process was identified, in which narrow needle-like reverse domains initially form across the entire interelectrode gap and then subsequently coarsen through domain wall propagation perpendicular to the applied electric field. To be consistent with the electrical switching data, we suggest that the initial formation of needle domains occurs more readily in the nanorods than in the plates.

Mesoscale flux-closure domain formation in single-crystal BaTiO3.

Over 60 years ago, Charles Kittel predicted that quadrant domains should spontaneously form in small ferromagnetic platelets. He expected that the direction of magnetization within each quadrant should lie parallel to the platelet surface, minimizing demagnetizing fields,and that magnetic moments should be configured into an overall closed loop, or flux-closure arrangement. Although now a ubiquitous observation in ferromagnets, obvious flux-closure patterns have been somewhat elusive in ferroelectric materials. This is despite the analogous behaviour between these two ferroic subgroups and the recent prediction of dipole closure states by atomistic simulations research. Here we show Piezoresponse Force Microscopy images of mesoscopic dipole closure patterns in free-standing, single-crystal lamellae of BaTiO(3). Formation of these patterns is a dynamical process resulting from system relaxation after the BaTiO(3) has been poled with a uniform electric field. The flux-closure states are composed of shape conserving 90° stripe domains which minimize disclination stresses.

Tunneling electroresistance effect in ferroelectric tunnel junctions at the nanoscale.

Using a set of scanning probe microscopy techniques, we demonstrate the reproducible tunneling electroresistance effect on nanometer-thick epitaxial BaTiO(3) single-crystalline thin films on SrRuO(3) bottom electrodes. Correlation between ferroelectric and electronic transport properties is established by direct nanoscale visualization and control of polarization and tunneling current. The obtained results show a change in resistance by about 2 orders of magnitude upon polarization reversal on a lateral scale of 20 nm at room temperature. These results are promising for employing ferroelectric tunnel junctions in nonvolatile memory and logic devices.

Nanoscale domain patterns in ultrathin polymer ferroelectric films.

High-resolution studies of domain configurations in Langmuir-Blodgett films of ferroelectric polymer poly(vinylidene fluoride-trifluoroethylene), P(VDF-TrFE), have been carried out by means of piezoresponse force microscopy (PFM). Changes in film thickness and morphology cause significant variations in polarization patterns. In continuous films and nanomesas with relatively low thickness/grain aspect ratio (<1/10), the relationship between the average domain size and thickness follows the Kittel law. Nanomesas with high aspect ratio (>1/5) exhibit significant deviations from this law, suggesting additional surface-energy-related mechanisms affecting the domain patterns. Polarization reversal within a single crystallite has been demonstrated and local switching parameters (coercive voltage and remnant piezoresponse) have been measured by monitoring the local hysteresis loops. Reliable control of polarization at the sub-grain level demonstrates a possibility of studying the mechanism of the intrinsic switching behavior down to the molecular scale.