Effect of Press-Fit Size on Insertion Mechanics and Cartilage Viability in Human and Ovine Osteochondral Grafts.

OBJECTIVE: The osteochondral allograft procedure uses grafts constructed larger than the recipient site to stabilize the graft, in what is known as the press-fit technique. This research aims to characterize the relationships between press-fit size, insertion forces, and cell viability in ovine and human osteochondral tissue. DESIGN: Human (4 donors) and ovine (5 animals) articular joints were used to harvest osteochondral grafts (4.55 mm diameter, N = 33 Human, N = 35 Ovine) and create recipient sites with grafts constructed to achieve varying degrees of press fit (0.025-0.240 mm). Donor grafts were inserted into recipient sites while insertion forces were measured followed by quantification of chondrocyte viability and histological staining to evaluate the extracellular matrix. RESULTS: Both human and ovine tissues exhibited similar mechanical and cellular responses to changes in press-fit. Insertion forces (Human: 3-169 MPa, Ovine: 36-314 MPa) and cell viability (Human: 16%-89% live, Ovine: 2%-76% live) were correlated to press-fit size for both human (force: r = 0.539, viability: r = -0.729) and ovine (force: r = 0.655, viability: r = -0.714) tissues. In both species, a press-fit above 0.14 mm resulted in reduced cell viability below a level acceptable for transplantation, increased insertion forces, and reduced linear correlation to press-fit size compared to samples with a press-fit below 0.14 mm. CONCLUSIONS: Increasing press-fit size required increased insertion forces and resulted in reduced cell viability. Ovine and human osteochondral tissues responded similarly to impact insertion and varying press-fit size, providing evidence for the use of the ovine model in allograft-related research.

Processing and properties of Na-doped porous calcium polyphosphates - Mechanical properties and in vitro degradation characteristics.

Porous calcium polyphosphate (CPP) is being investigated for use as a biodegradable bone substitute and for repair of osteochondral defects. The necessary requirements for these applications, particularly in load-bearing sites, include sufficient strength to withstand functional forces prior to bone ingrowth and substitution of the initial porous CPP template with new bone and cartilage (for osteochondral implants) in a timely and efficacious manner. The present study explored the effects of Na+ doping and processing to form porous structures of both higher strength and faster degradation than previously reported for 'pure' (non-doped) CPP structures of similar geometry. Compressive and tensile strengths were determined before and after 30-day in vitro degradation (PBS, pH 7.1 at 37 °C) and degradation rates assessed. Scanning electron microscopy (SEM), x-ray diffraction (XRD) and solid state nuclear magnetic resonance (31P SS NMR) were used to evaluate 'pure' and Na-doped CPP samples before and after degradation. The results indicated that the different processing protocols required to prepare samples of similar volume % porosity (a 2-step procedure with a Step-1 sintering temperatures equal to 575 °C being used with the Na-doped samples versus a 585 °C Step-1 treatment for 'pure' CPP) resulted in an approximate 1.5- to 2-fold increase in strength (tensile & compressive respectively) and 2-fold increase in degradation rate of Na-doped CPP compared with 'pure' CPP. This difference was attributed to the different Step-1 sintering temperatures used for sample processing.

Heterogeneity of osteoclast activity and bone turnover in different skeletal sites.

OBJECTIVE: To compare osteoclasts and bone turnover in the cranial and appendicular skeletons of mice and determine whether estrogen depletion has an impact on these differences. DESIGN: In vitro osteoclastogenesis (OCG) was performed on osteoclasts precursors derived from calvarial, mandibular and femoral bone marrow. In vitro, mature osteoclasts were stained with TRAP in plastic petri dishes and with DAPI and Phalloidin on glass coverslips to identify mature osteoclasts and compare osteoclast surface area and nuclei number in the different bone sites, respectively. Quantification of osteoclast resorption pit (Rpit) volume and surface area from different bone sites was achieved using dentin slices stained with Picrosirius red and confocal microscopy. In vivo TRAP, static and dynamic histomorphometric analyses were performed on 5-month-old mouse calvarial, long bone and mandibular trabecular bone to compare bone resorption and formation rates, respectively. Mice were ovariectomized (OVX) at 5 months of age and sacrificed at 6 months of age to establish an osteoporosis model for differences in osteoclasts activity and to monitor the changes in bone turnover rates in the three bone sites upon estrogen depletion. RESULT: s Phalloidin stained calvarial osteoclasts were larger compared to long bone and mandibular osteoclasts. Rpits from osteoclasts derived from mandibular bone were smaller and had lower volume values compared to long bone and calvarial bone Rpits. In vivo analysis showed significant increases in bone formation rates in calvarial trabecular bone compared to long bone and mandibular trabecular bone. Turnover was enhanced upon estrogen depletion in calvarial trabecular bone. Resorption was increased without a corresponding increase in bone formation in the trabecular metaphysis of long bone. Mandibular trabecular bones do not appear to be affected by OVX. CONCLUSION: The cranial and appendicular skeletons differ from one another in that osteoclasts from calvarial bone have the highest resorptive capacity which is coupled to bone formation both pre and post-OVX. Mandibular bones show the lowest turnover rates and are not affected by OVX.

In vivo effects of two novel ALN-EP4a conjugate drugs on bone in the ovariectomized rat model for reversing postmenopausal bone loss.

UNLABELLED: Two alendronate-EP4 agonist (ALN-EP4a) conjugate drugs, C1 and C2, which differ in structure by a short linker molecule, were evaluated in ovariectomized (OVX) rats for their anabolic effects. We showed that C1 led to significant anabolic effects on cortical and trabecular bone while anabolic effects associated with C2 were minimal. INTRODUCTION: EP4as were covalently linked to ALN to create ALN-EP4a conjugate anabolic bone drugs, C1 and C2, which differ in structure by a short linker molecule in C1. When administered systemically, C1 and C2 are delivered to bone through targeted binding of ALN, where local hydrolytic enzymes liberate EP4a from ALN to exert anabolic effects. Here, we compare effects of C1 to C2 in a curative in vivo study. METHODS: Three-month-old female Sprague Dawley rats were OVX or sham operated and allowed to lose bone for 3 months. Animals were then treated via tail vein injections for 3 months and sacrificed. Treatment groups were as follows: C1L (5 mg/kg biweekly), C1H (5 mg/kg weekly), C2L (15 mg/kg monthly), C2H (15 mg/kg biweekly), OVX and sham control (phosphate-buffered saline (PBS) biweekly), and ALN/EP4a-unconjugated mixture (0.75 mg/kg each biweekly). RESULTS: MicroCT analysis showed that C1H treatment significantly increased vertebral bone mineral density (vBMD) and trabecular bone volume versus OVX controls while C2 treatments did not. Biomechanical testing showed that C1H treatment but not C2 treatments led to significant improvement in the load bearing abilities of the vertebrae compared to OVX controls. C1 stimulated endocortical bone formation and increased load bearing in femurs, while C2 did not. CONCLUSIONS: We showed that C1 led to significant anabolic effects on cortical and trabecular bone while anabolic effects associated with C2 were minimal. These results led us to hypothesize a mode of action by which presence of a linker is crucial in facilitating the anabolic effects of EP4a when dosed as a prodrug with ALN.

Deletion of filamin A in monocytes protects cortical and trabecular bone from post-menopausal changes in bone microarchitecture.

The objective of the study was to determine the in vivo role of Filamin A (FLNA) in osteoclast generation and function, through the assessment of trabecular bone morphology, bone turnover, and the resulting changes in mechanical properties of the skeleton in mice with targeted deletion of FLNA in pre-osteoclasts. Using a conditional targeted knockdown of FLNA in osteoclasts, we assessed bone characteristics in vivo including micro-computed tomography (micro-ct), histomorphometric analyses, and bone mechanical properties. These parameters were assessed in female mice at 5 months of age, in an aging protocol (comparing 5-month-old and 11-month-old mice) and an osteoporosis protocol [ovariectomized (OVX) at 5 months of age and then sacrificed at 6 and 11 months of age]. In vivo bone densitometry, mechanical and histomorphometric analyses revealed a mild osteoporotic phenotype in the FLNA-null 5-month and aging groups. The WT and FLNA-KO bones did not appear to age differently. However, the volumetric bone mineral density decrease associated with OVX in WT is absent in FLNA-KO-OVX groups. The skeleton in the FLNA-KO-OVX group does not differ from the FLNA-KO group both in mechanical and structural properties as shown by mechanical testing of femora and vertebrae and histomorphometry of vertebrae. Additionally, FLNA-KO femora are tougher and more ductile than WT femora. The result of this study indicates that while FLNA-KO bones are weaker than WT bones, they do not age differently and are protected from estrogen-mediated post-menopausal osteoporosis.

Enhanced levels of non-enzymatic glycation and pentosidine crosslinking in spontaneous osteoarthritis progression.

OBJECTIVE: To test the hypothesis that heightened advanced glycation endproducts (AGEs) content in cartilage accelerates the progression of spontaneous osteoarthritis (OA) in the Hartley guinea pig (HGP) model. METHODS: Twenty-eight male, 3-month-old HGPs were used. Eight were left untreated as a baseline control group and sacrificed at 3 months of age (n = 4) and 9 months of age (n = 4; age-matched controls). The other 20 HGPs received intra-articular knee injections in the right knee whereas the left knees acted as contra-lateral non-injected controls. Injections consisted of 100 µl phosphate buffered saline (PBS; n = 10) or PBS+2.0 M D-(-)-Ribose (n = 10). Injections were given once weekly for 24 weeks. At the end of the treatment period, the tibiae were fixed with formalin, scanned with microCT for sub-chondral bone mineral density, and then histological slides were prepared, stained with Safranin-O with Fast Green counter stain and scored using the OARSI-HISTOgp scheme. Cartilage pentosidine (established biomarker for AGEs) content, collagen content (% dry mass), glucosaminoglycan GAG-to-collagen ratio (µg/µg), GAG-to-DNA ratio and DNA-to-collagen ratio were measured. RESULTS: Pentosidine content increased greatly due to PBS + Ribose injection (P < 0.0001) and reached levels found in cartilage from 80-year-old humans. Surprisingly, mean OARSI-HISTOgp scores for both the injected and contra-lateral controls in the PBS + Ribose group were not detectably different, nor were they different from the mean score for the age-matched control group. CONCLUSION: AGEs accumulation due to intra-articular ribose-containing injections in the HGP model of spontaneous knee OA did not enhance disease progression.

Mechanism of bone collagen degradation due to KOH treatment.

BACKGROUND: The mechanisms underlying the effect of alterations in type I collagen on bone mechanical properties are not well defined. In a previous study, male and female emu tibiae were endocortically treated with 1M potassium hydroxide (KOH) solution for 1-14days. This treatment resulted in negligible mass loss (0.5%), collagen loss (0.05%), no differences in geometrical parameters but significant changes in mechanical properties. The objective of this study was to determine the mechanism of collagen degradation due to KOH treatment in order to explain the previously observed mechanical property changes. METHODS: Bone mineral was assessed using x-ray diffraction (XRD), microhardness and backscattered electron imaging (BSE). Bone collagen was assessed using α-chymotrypsin digestion, differential scanning calorimetry (DSC), gel electrophoresis (SDS-PAGE) and polarized light microscopy (PLM). RESULTS: BSE, microhardness and XRD revealed no changes in bone mineral due to KOH treatment. DSC showed an altered curve shape (lower and broader), indicating a change in collagen organization due to KOH treatment. Decreased α-chain band intensity in 14-day KOH treated groups detected using SDS-PAGE indicated α-chain fragmentation due to KOH treatment. PLM images revealed differences in collagen structure in terms of pattern distribution of preferentially oriented collagen between the periosteal and endocortical regions. CONCLUSION: These results suggest that endocortical KOH treatment causes in situ collagen degradation, which explains the previously reported altered mechanical properties. GENERAL SIGNIFICANCE: Compromising the organic component of bone contributes to an increase in bone fragility.

The fatigue resistance of rabbit tibiae varies with age from youth to middle age.

UNLABELLED: Young adults are at risk of stress fractures. Risk is higher in younger and female individuals. Stress fractures occur due to repeated loading of the bone (fatigue). We modeled this with rabbit tibiae. Age increased fatigue resistance which correlated with bone mineral density. A sex difference was not detected. INTRODUCTION: Younger adults who engage in intense physical activity with a sudden increase in intensity level (military recruits/college athletes) are at risk of bone stress fractures. Risk is greater in females and diminishes with aging. Stress fractures may be the result of fatigue damage, which is not repaired rapidly enough to avoid fracture. It was hypothesized that the fatigue resistance of whole rabbit tibiae would be less in female specimens but greater as animal age increased. METHODS: Rabbit tibiae were harvested from three age groups (4, 7, and ≥ 12 months (females only)). The tibiae were scanned with dual energy X-ray absorptiometry to determine bone mineral density (BMD), computed tomography to quantify geometry, and then fatigue tested in three-point bending. RESULTS: In the ≥ 12-month group, BMD was approximately 20% higher, while the fatigue resistance was found to be approximately ten times higher than the other age groups. Sex was not a factor in the 4- and 7-month groups. Multiple linear regression revealed that fatigue life was negatively correlated with applied stress range and positively correlated with BMD (adjusted r (2) = 0.69). CONCLUSIONS: A difference in fatigue behavior due to sex was not detected, but there was a large increase in fatigue resistance with age. This correlated with increased BMD and parallels a reduced risk of stress fracture due to age in military recruits. Skeletal "maturation" may play an important role in determining stress fracture risk. Increased risk in females may be due to mechanisms other than those that determine material behavior.

Deleting Rac1 improves vertebral bone quality and resistance to fracture in a murine ovariectomy model.

SUMMARY: The roles of Rac1 and Rac2 in regulating osteoclast-mediated bone quality in postmenopausal osteoporosis were evaluated using an ovariectomized murine model. Animals' bone composition and architecture were evaluated. Our results demonstrate that the deletion of Rac1 increases vertebral bone quality compared to wild-type bones in an ovariectomized model. INTRODUCTION: To determine the roles of the Rho family small GTPases Rac1 and Rac2 in regulating osteoclast-mediated bone quality in a model of postmenopausal osteoporosis. METHODS: Twelve-month-old female mice from three genotypes-wild type (WT), Rac1 null (LysM.Rac1 KO), and Rac2 null (Rac2KO)--were studied in control and ovariectomized groups (mice previously ovariectomized at 4 months of age). Animals were sacrificed at 12 months of age, and the femora and vertebrae were harvested for mechanical testing, bone densitometry, micro-computed tomography, and histomorphometric analyses to evaluate bone mineralization and architecture. The results were compared between groups using ANOVA and LSD post-hoc tests. RESULTS: We observed that LysM.Rac1 KO mice showed higher vertebral bone mineral density compared to WT in both control and ovariectomized groups. Consistent with this finding, LysM.Rac1 KO vertebrae showed increased resistance to fracture and increased trabecular connectivity compared to WT in both groups. Micro-CT analysis revealed that Rac2KO ovariectomized vertebrae have more trabecular bone compared to WT and LysM.Rac1 KO, but this did not translate into increased fracture resistance. CONCLUSION: Our results demonstrate that the deletion of Rac1 increases vertebral bone quality compared to WT bones in a postmenopausal osteoporosis model.

The long-term effects of water fluoridation on the human skeleton.

Municipal water fluoridation has notably reduced the incidence of dental caries and is widely considered a public health success. However, ingested fluoride is sequestered into bone, as well as teeth, and data on the long-term effect of exposure to these very low doses of fluoride remain inconclusive. Epidemiological studies suggest that effects of fluoride on bone are minimal. We hypothesized that the direct measurement of bone tissue from individuals residing in municipalities with and without fluoridated water would reveal a relationship between fluoride content and structural or mechanical properties of bone. However, consonant with the epidemiological data, only a weak relationship among fluoride exposure, accumulated fluoride, and the physical characteristics of bone was observed. Analysis of our data suggests that the variability in heterogenous urban populations may be too high for the effects, if any, of low-level fluoride administration on skeletal tissue to be discerned.

A new tool to assess the mechanical properties of bone due to collagen degradation.

Current clinical tools for evaluating fracture risk focus only on the mineral phase of bone. However, changes in the collagen matrix may affect bone mechanical properties, increasing fracture risk while remaining undetected by conventional screening methods such as dual energy x-ray absorptiometry (DXA) and quantitative ultrasound (QUS). The mechanical response tissue analyzer (MRTA) is a non-invasive, radiation-free potential clinical tool for evaluating fracture risk. The objectives of this study were two-fold: to investigate the ability of the MRTA to detect changes in mechanical properties of bone as a result of treatment with 1 M potassium hydroxide (KOH) and to evaluate the differences between male and female bone in an emu model. DXA, QUS, MRTA and three-point bending measurements were performed on ex vivo emu tibiae before and after KOH treatment. Male and female emu tibiae were endocortically treated with 1 M KOH solution for 1-14 days, resulting in negligible collagen loss (0.05%; by hydroxyproline assay) and overall mass loss (0.5%). Three-point bending and MRTA detected significant changes in modulus between days 1 and 14 of KOH treatment (-18%) while all values measured by DXA and QUS varied by less than 2%. This close correlation between MRTA and three-point bending results support the utility of the MRTA as a clinical tool to predict fracture risk. In addition, the significant reduction in modulus contrasted with the negligible amount of collagen removal from the bone after KOH exposure. As such, the significant changes in bone mechanical properties may be due to partial debonding between the mineral and organic matrix or in situ collagen degradation rather than collagen removal. In terms of sex differences, male emu tibiae had significantly decreased failure stress and increased failure strain and toughness compared to female tibiae with increasing KOH treatment time.

The use of fractography to supplement analysis of bone mechanical properties in different strains of mice.

Fractography has not been fully developed as a useful technique in assessing failure mechanisms of bone. While fracture surfaces of osteonal bone have been explored, this may not apply to conventional mechanical testing of mouse bone. Thus, the focus of this work was to develop and evaluate the efficacy of a fractography protocol for use in supplementing the interpretation of failure mechanisms in mouse bone. Micro-computed tomography and three-point bending were performed on femora of two groups of 6-month-old mice (C57BL/6 and a mixed strain background of 129SV/C57BL6). SEM images of fracture surfaces were collected, and areas of "tension", "compression" and "transition" were identified. Percent areas of roughness were identified and estimated within areas of "tension" and "compression" and subsequently compared to surface roughness measurements generated from an optical profiler. Porosity parameters were determined on the tensile side. Linear regression analysis was performed to evaluate correlations between certain parameters. Results show that 129 mice exhibit significantly increased bone mineral density (BMD), number of "large" pores, failure strength, elastic modulus and energy to failure compared to B6 mice (p<0.001). Both 129 and B6 mice exhibit significantly (p<0.01) more percent areas of tension (49+/-1%, 42+/-2%; respectively) compared to compression (26+/-2%, 31+/-1%; respectively). In terms of "roughness", B6 mice exhibit significantly less "rough" areas (30+/-4%) compared to "smooth" areas (70+/-4%) on the tensile side only (p<0.001). Qualitatively, 129 mice demonstrate more evidence of bone toughening through fiber bridging and loosely connected fiber bundles. The number of large pores is positively correlated with failure strength (p=0.004), elastic modulus (p=0.002) and energy to failure (p=0.041). Percent area of tensile surfaces is positively correlated with failure strength (p<0.001), elastic modulus (p=0.016) and BMD (p=0.037). Percent area of rough compressive surfaces is positively correlated with energy to failure (p=0.039). Evaluation of fracture surfaces has helped to explain why 129 mice have increased mechanical properties compared to B6 mice, namely via toughening mechanisms on the compressive side of failure. Several correlations exist between fractography parameters and mechanical behavior, supporting the utility of fractography with skeletal mouse models.

Bone quality and bone strength in BXH recombinant inbred mice.

The relationship between bone quality and strength was studied in 11 BXH recombinant inbred (RI) strains of mice. The bone quality parameters studied were bone mineralization, microhardness, architecture, and connectivity. Previous studies have demonstrated considerable variability in bone density, biomechanical properties, and microstructure among inbred strains of mice. In particular, C3H/HeJ (C3H) mice exhibit thicker femoral and vertebral cortices and fewer trabeculae in the vertebral body compared with C57BL/6J (B6) mice, despite having similar vertebral bone strength. A set of RI mouse strains has been generated from B6 and C3H (denoted BXH) in an attempt to isolate genetic regulation of numerous traits, including bone. The objective of this study was to investigate relationships among bone quality and bone strength in femurs and vertebrae among BXH RI mice. The study involved 11 BXH RI strains of female mice (n = 5-7) as well as the B6 and C3H progenitor strains. Parameters contributing to bone quality were evaluated, including BMD, bone mineralization, microhardness, architecture, and connectivity. There was a strong correlation between femoral and vertebral BMD in all strains (P < 0.001) except in BXH-9 and -10 (P < 0.001). Within the vertebrae, cortical bone was more mineralized than trabecular bone, and a strong correlation existed between the two (P < 0.001). However, cortical microhardness did not differ from trabecular microhardness. Cortical bone was more mineralized in the femur than in the vertebrae and significantly harder, by 30%. There was a wide range in trabecular connectivity, architecture, and femur geometry among BXH RI strains. BMD explained 43% of vertebral bone strength but only 11% of femoral bone strength. Trabecular connectivity explained an additional 8% of vertebral strength, while mineralization and femur geometry explained 7% and 50% of femoral strength, respectively. Different bone quality parameters had varying influences on bone mechanical properties, depending on bone site. BMD may play a larger role in explaining bone strength in the vertebrae than in the femur. Moreover, cortical bone in the femur is harder than in vertebrae. The control of cortical bone material properties may be site-dependent.

Membrane type-1 matrix metalloproteinase is induced following cyclic compression of in vitro grown bovine chondrocytes.

OBJECTIVE: To determine if membrane type-1 matrix metalloproteinase (MT1-MMP) will respond to cyclic compression of chondrocytes grown in vitro and the regulatory mechanisms underlying this response. METHODS: Cyclic compression (30min, 1kPa, 1Hz) was applied to bovine chondrocytes (6-9-month-old animals) grown on top of a biodegradable substrate within 3 days of initiating culture. Luciferase assays using bovine articular chondrocytes were undertaken to demonstrate the mechanosensitivity of MT1-MMP. Semi-quantitative reverse-transcription polymerase chain reaction (RT-PCR) and western blot analysis were used to establish the time course of gene and protein upregulation in response to cyclic compression. The regulation of MT1-MMP was assessed by electrophoretic mobility shift assays, RT-PCR and western blot analysis. As well, an MT1-MMP decoy oligonucleotide and an extracellular signal-regulated kinase 1/2 (ERK1/2) pharmacological inhibitor were utilized to further characterize MT1-MMP regulation. RESULTS: After cyclic compression, MT1-MMP showed a rapid and transient increase in gene expression. Elevated protein levels were detected within 2h of stimulation which returned to baseline by 6h. During cyclic compression, phosphorylation of the mitogen activated protein kinase ERK1/2 increased significantly. This was followed by increased gene and protein expression of the transcription factor; early growth factor-1 (Egr-1) and Egr-1 binding to the MT1-MMP promoter. Blocking Egr-1 DNA binding with a decoy MT1-MMP oligonucleotide, downregulated MT1-MMP gene expression. The ERK1/2 inhibitor U0126 also reduced Egr-1 DNA binding activity to MT1-MMP promoter sequences and subsequent transcription of MT1-MMP. CONCLUSIONS: These data suggest that cyclic compression of chondrocytes in vitro upregulates MT1-MMP via ERK1/2 dependent activation of Egr-1 binding. Delineation of the regulatory pathways activated by mechanical stimulation will further our understating of the mechanisms influencing tissue remodeling.

Formation of biphasic constructs containing cartilage with a calcified zone interface.

The zone of calcified cartilage is the mineralized region of articular cartilage that anchors the hyaline cartilage to the subchondral bone and serves to disperse mechanical forces across this interface. In an attempt to mimic this zonal organization, we have developed the methodology to form biphasic constructs composed of cartilaginous tissue anchored to the top surface of a bone substitute (porous calcium polyphosphate, CPP) with a calcified interface. To accomplish this, chondrocytes were selectively isolated from the deep zone of bovine articular cartilage, placed on top of the CPP substrate, and grown in the presence of beta-glycerophosphate (10 mM, beta-GP). By 8 weeks, cartilage tissue had formed with two zones: a calcified region adjacent to the CPP substrate and a hyaline-like zone above. Little or no mineralization occurred in the absence of beta-GP. The mineral that formed in vitro was identified as hydroxyapatite, similar in composition and crystal size to that found in vivo. The tissue stiffness was seven times greater, and the interfacial shear properties at the cartilage-CPP interface were at least two times greater in the presence of this mineralized zone within the in vitro-formed cartilage than in tissue lacking a mineral zone. In conclusion, developing a biphasic construct with a calcified zone at the tissue-biomaterial interface resulted in significantly better cartilage load-bearing (compressive) properties and interfacial shear strength, emphasizing the importance of the presence of a mineralized zone in bioengineered cartilage. Because failure due to shear occurred at the cartilage-CPP interface instead of the tidemark, as occurs with osteochondral tissue, further study is required to optimize this system so that it more closely mimics the native tissue.

Osteochondral defect repair using a novel tissue engineering approach: sheep model study.

Porous calcium polyphosphate (CPP) constructs of desired density were formed by sintering CPP powders. Articular cartilage was formed on these constructs in cell culture over an 8-week period with the resulting cartilage layer forming on the CPP surface and within the near surface pores thereby mechanically anchoring the cartilage to the CPP. The biphasic constructs so formed were implanted in sheep femoral condyle sites and left for short-term periods (3 to 4 months) or longer periods (9 months). Implant fixation within the condyle sites was achieved through bone ingrowth into the inferior CPP pores. The properties and characteristics of the as-in vitro-formed, short- and long-term implanted tissues were compared. The results indicated that such implants might be useful for repair of small subchondral defects.

The genetic influence on bone susceptibility to fluoride.

INTRODUCTION: The influence of genetic background on bone architecture and mechanical properties is well established. Nevertheless, to date, only few animal studies explore an underlying genetic basis for extrinsic factors effect such as fluoride effect on bone metabolism. MATERIALS AND METHODS: This study assessed the effect of increasing fluoride doses (0 ppm, 25 ppm, 50 ppm, 100 ppm) on the bone properties in 3 inbred mouse strains that demonstrate different susceptibilities to developing enamel fluorosis (A/J a "susceptible" strain, 129P3/J a "resistant" strain and SWR/J an "intermediate" strain). Fluoride concentrations were determined in femora and vertebral bodies. Bone mineral density was evaluating through DEXA. Finally, three-point bend testing of femora, compression testing of vertebral bodies and femoral neck-fracture testing were performed to evaluate mechanical properties. RESULTS: Concordant with increasing fluoride dose were significant increases of fluoride concentration in femora and vertebral bodies from all 3 strains. Fluoride treatment had little effect on the bone mineral densities (BMD) in the 3 strains. Mechanical testing showed significant alterations in "bone quality" in the A/J strain, whereas moderate alterations in "bone quality" in the SWR/J strain and no effects in the 129P3/J strain were observed. CONCLUSION: The results suggest that genetic factors may contribute to the variation in bone response to fluoride exposure and that fluoride might affect bone properties without altering BMD.

Cyclic compressive mechanical stimulation induces sequential catabolic and anabolic gene changes in chondrocytes resulting in increased extracellular matrix accumulation.

Overcoming the limited ability of articular cartilage to self-repair may be possible through tissue engineering. However, bioengineered cartilage formed using current methods does not match the physical properties of native cartilage. In previous studies we demonstrated that mechanical stimulation improved cartilage tissue formation. This study examines the mechanisms by which this occurs. Application of uniaxial, cyclic compression (1 kPa, 1 Hz, 30 min) significantly increased matrix metalloprotease (MMP)-3 and MMP-13 gene expression at 2 h compared to unstimulated cells. These returned to constitutive levels by 6 h. Increased MMP-13 protein levels, both pro- and active forms, were detected at 6 h and these decreased by 24 h. This was associated with tissue degradation as more proteoglycans and collagen had been released into the culture media at 6 h when compared to the unstimulated cells. This catabolic change was followed by a significant increase in type II collagen and aggrecan gene expression at 12 h post-stimulation and increased synthesis and accumulation of these matrix molecules at 24 h. Mechanical stimulation activated the MAP kinase pathway as there was increased phosphorylation of ERK1/2 and JNK as well as increased AP-1 binding. Mechanical stimulation in the presence of the JNK inhibitor, SP600125, blocked AP-1 binding preventing the increased gene expression of MMP-3 and -13 at 2 h and type II collagen and aggrecan at 12 h as well as the increased matrix synthesis and accumulation. Given the sequence of changes, cyclic compressive loading appears to initiate a remodelling effect involving MAPK and AP-1 signalling resulting in improved in vitro formation of cartilage.

A single application of cyclic loading can accelerate matrix deposition and enhance the properties of tissue-engineered cartilage.

OBJECTIVE: Mechanical stimulation is a widely used method to enhance the formation and properties of tissue-engineered cartilage. While studies have evaluated the responsiveness of chondrocytes to mechanical stimuli, little is known about how much stimulation is actually required. Thus, the purpose of this study was to investigate the effect of a single application of cyclic loading to chondrocytes on the formation and properties of in vitro-formed tissue. DESIGN: Isolated bovine articular chondrocytes were seeded on ceramic substrates in 3D culture and subjected to a single application of compressive cyclic loading at 1, 8 or 15 days after seeding. Once the time at which the chondrocytes were most sensitive to mechanical loading was determined, the effect of a single application on the synthesis and accumulation of matrix molecules as well as the mechanical properties of the in vitro-formed cartilage tissue was evaluated. RESULTS: Chondrocytes were more responsive to cyclic loading applied early in culture. Cyclic forces applied 24 h after the cultures were established increased collagen and proteoglycan syntheses (48 +/- 11% and 49 +/- 11%, respectively). This single application of cyclic loading also increased the accumulation of collagen (stimulated: 207 +/- 20 microg, control: 173 +/- 9 microg) and proteoglycans (stimulated: 302 +/- 24 microg, control: 270 +/- 14 microg) as well as improved the mechanical properties of the in vitro-formed tissue (twofold increase in equilibrium stress and modulus) determined 4 weeks after the applied stimulus. CONCLUSIONS: A single application of cyclic loading to chondrocytes early in culture increased matrix accumulation and enhanced the mechanical properties of the in vitro-formed tissue. This suggests that mechanical forces do not have to be applied intermittently over long periods of time to accelerate in vitro tissue formation.

The effects of vanadium treatment on bone in diabetic and non-diabetic rats.

Vanadium-based drugs lower glucose by enhancing the effects of insulin. Oral vanadium drugs are being tested for the treatment of diabetes. Vanadium accumulates in bone, though it is not known if incorporated vanadium affects bone quality. Nine- to 12-month-old control and streptozotocin-induced diabetic female Wistar rats were given bis(ethylmaltolato)oxovanadium(IV) (BEOV), a vanadium-based anti-diabetic drug, in drinking water for 12 weeks. Non-diabetic rats received 0, 0.25 or 0.75 mg/ml BEOV. Groups of diabetic rats were either untreated or treated with 0.25-0.75 mg/ml BEOV as necessary to lower blood glucose in each rat. In diabetic rats, this resulted in a Controlled Glucose group, simulating relatively well-managed diabetes, and an Uncontrolled Glucose group, simulating poorly managed diabetes. Plasma insulin, glucose and triglyceride assays assessed the diabetic state. Bone mineral density (BMD), mechanical testing, mineral assessment and histomorphometry measured the effects of diabetes on bone and the effects of BEOV on non-diabetic and diabetic bone. Diabetes decreased plasma insulin and increased plasma glucose and triglycerides. In bone, diabetes decreased BMD, strength, mineralization, bone crystal length, and bone volume and connectivity. Treatment was effective in incorporating vanadium into bone. In all treated groups, BEOV increased osteoid volume. In non-diabetic bone, BEOV increased cortical bone toughness, mineralization and bone formation. In controlled glucose rats, BEOV lowered plasma glucose and improved BMD, mechanical strength, mineralization, bone crystal length and bone formation rate. In poorly controlled rats, BEOV treatment slightly lowered plasma glucose but did not improve bone properties. These results suggest that BEOV improves diabetes-related bone dysfunction primarily by improving the diabetic state. BEOV also appeared to increase bone formation. Our study found no negative effects of vanadium accumulation in bone in either diabetic or non-diabetic rats at the dose given.