Development of a non-intercepting weak beam current measurement electronics for Heavy Ion Accelerator Facility in Lanzhou.

Non-destructive measurements of low-intensity charged particle beams are particularly challenging for beam diagnostics. At the Heavy Ion Accelerator Facility in Lanzhou (HIRFL), beams with weak currents below 1 µA are often provided for experiments. The detection of such low beam current is below the threshold of typical standard beam current transformers. Therefore, a low-intensity monitoring system is developed by using a sensitive capacitive pick-up (PU) and low-noise electronics. This device measures beam currents by digitally analyzing the amplitude of the PU signals using a homodyne detection scheme. During lab tests, the amplitude nonlinearity is <0.5% in the operational range of 1 nA-45 µA and the amplitude resolution is 0.94 nA. At present, four measurement systems for low beam currents are installed at HIRFL for the monitoring of standard operating conditions with low beam currents below 1 µA. After an absolute calibration with a Faraday cup, it can be used for accurate beam intensity measurement with a current resolution of about 1 nA.

Inorganic-Organic Hybrid Layered Semiconductor AgSePh: Quasi-Solution Synthesis, Optical Properties, and Thermolysis Behavior.

Two-dimensional inorganic-organic hybrid layered semiconductors are actively studied because of their naturally formed multiquantum well (MQW) structures and associated optical, photoelectric, and quantum optics characteristics. Silver benzeneselenolate (AgSePh, Ph = C6H5) is a new member of such hybrid layered materials, but has not fully been exploited. Herein, we present a quasi-solution method to prepare high quality free-standing AgSePh flake-like microcrystals by reacting diphenyl diselenide (Ph2Se2) with silver nanoparticles. The resultant AgSePh microflakes exhibit room-temperature (RT) resolvable MQW-induced quasi-particle quantization and interesting optical properties, such as three distinct excitonic resonance absorptions X1 (2.67 eV), X2 (2.71 eV), and X3 (2.83 eV) in the visible region, strong narrow-line width blue photoluminescence at ∼2.64 eV (470 nm) from the radiative recombination of the X1 exciton state, and a large exciton binding energy (∼0.35 eV). Furthermore, AgSePh microcrystals show high stability under water, oxygen, and heat environments, while above 220 °C, they will thermally decompose to silver and Ph2Se2 as evidenced by a combination of thermogravimetry and differential scanning calorimetry and pyrolysis-coupled gas chromatography-mass spectrometry studies. Finally, a comparison is extended between AgSePh and other metal benzeneselenolates, benzenethiolates, and alkanethiolates to clarify differences in their solubility, decomposition/melting temperature, and pyrolytic products.

Oxidation-enabled SnS conversion to two-dimensional porous SnO2 flakes towards NO2 gas sensing.

Tin dioxide (SnO2)-based electronic materials and gas sensors have attracted extensive attention from academia and industry. Herein we report the preparation of two-dimensional (2D) porous SnO2 flakes by thermal oxidation of 2D SnS flakes that serve as a self-sacrificial template. An oxidation-enabled, temperature-dependent matter conversion from SnS through three-phase SnS-SnS2-SnO2 (400 °C) and two-phase SnS2-SnO2 (600 °C) to pure-phase SnO2 (≥800 °C) is disclosed by means of combined XRD, TG-DSC and XPS studies. Meanwhile, the associated chemical reactions and the mass and heat changes during this solid-state conversion process are clarified. The as-prepared 2D SnO2 flakes exhibit structural porosity with tunable pore sizes and crystallite sizes/crystallinity, resulting in superior potential for NO2 sensing. At the optimized operating temperature of 200 °C, the prototype gas sensors made of porous SnO2 flakes show competitive sensing parameters in a broad NO2 concentration range of 50 ppb-10 ppm in terms of high response, faster response/recovery speeds, and good selectivity and stability. A sensing mechanism involving the adsorption and desorption of NO2/O2 molecules and the possible surface reactions is further rationalized for the SnO2 NO2 gas sensors.

A new digital beam position and phase measurement implementation based on a field programmable gate array for the high intensity heavy-ion accelerator iLinac.

A new digital beam position and phase measurement (BPM) system was designed for the ion-Linac accelerator at the high intensity heavy ion accelerator facility. The fundamental and second harmonic signals are retrieved from the BPM electrodes to simultaneously calculate their respective beam positions and phases. All data acquisition and digital signal processing algorithm routines are performed in a field programmable gate array (FPGA). The position and phase information are obtained by using the in-phase and quadrature demodulation method. A practical and straightforward method is used to generate the second harmonic reference signal for processing the second harmonic beam signal. The reconfigurable filters are integrated into the FPGA to allow the measurement of short beam pulse length. The laboratory test results show that the achieved phase resolution is better than 0.2° and 0.03° when the input signal is -60 and -45 dBm, respectively. A position resolution better than 30 µm was achieved for an input power level of approximately -60 dBm, and it can reach 7 µm with the input power higher than -45 dBm. The entire execution time of the algorithm is accomplished within 3.4 µs, which provides a sufficient reaction time for the fast beam interlock signal to the machine protection system. The performance of this newly designed prototype BPM electronics was evaluated with the online proton beam.

Surface adsorption and lubrication properties of plant and dairy proteins: A comparative study.

The aim of this work was to compare the surface adsorption and lubrication properties of plant and dairy proteins. Whey protein isolate (WPI) and pea protein isolate (PPI) were chosen as model animal and plant proteins, respectively, and various protein concentrations (0.1-100 mg/mL) were studied with/without heat treatment (90 °C/60 min). Quartz crystal microbalance with dissipation monitoring (QCM-D) experiments were performed on hydrophilic (gold) and hydrophobic polydimethylsiloxane (PDMS) sensors, with or without a mucin coating, latter was used to mimic the oral surface. Soft tribology using PDMS tribopairs in addition to wettability measurements, physicochemical characterization (size, charge, solubility) and gel electrophoresis were performed. Soluble fractions of PPI adsorbed to significantly larger extent on PDMS surfaces, forming more viscous films as compared to WPI regardless of heat treatment. Introducing a mucin coating on a PDMS surface led to a decrease in binding of the subsequent dietary protein layers, with PPI still adsorbing to a larger extent than WPI. Such large hydrated mass of PPI resulted in superior lubrication performance at lower protein concentration (≤10 mg/mL) as compared to WPI. However, at 100 mg/mL, WPI was a better lubricant than PPI, with the former showing the onset of elastohydrodynamic lubrication. Enhanced lubricity upon heat treatment was attributed to the increase in apparent viscosity. Fundamental insights from this study reveal that pea protein at higher concentrations demonstrates inferior lubricity than whey protein and could result in unpleasant mouthfeel, and thus may inform future replacement strategies when designing sustainable food products.

Endothelial IL-8 induced by porcine circovirus type 2 affects dendritic cell maturation and antigen-presenting function.

BACKGROUND: Porcine circovirus (PCV) disease caused by PCV type 2 (PCV2) is mainly attributed to immunosuppression and immune damage. PCV2 can infect vascular endothelial cells and induce high expression of endothelial IL-8. Dendritic cells (DCs), as professional antigen-presenting cells, can not only present antigens but also activate naïve T-cells, causing an immune response. METHODS: To demonstrate whether endothelial IL-8 is the main factor inhibiting the maturation and related functions of dendritic cells during PCV2 infection, monocyte-derived DCs (MoDCs) and porcine iliac artery endothelial cells (PIECs) processed by different methods were co-cultured in two ways. Flow cytometry, molecular probe labeling, fluorescence quantitative PCR, and the MTS assay were used to detect the changes in related functions and molecules of MoDCs. RESULTS: Compared to those in the PIEC-DC group, the endothelial IL-8 upregulation co-culture group showed significantly lower double-positive rates for CD80/86 and MHC-II of MoDCs and significantly increased endocytosis of MoDCs. Meanwhile, the adhesion rate and average fluorescence intensity of MoDCs were significantly downregulated in migration and adhesion experiments. Furthermore, the MHC-I and LAMP7 mRNA levels in MoDCs and the proliferation of MoDC-stimulated T-cells were markedly reduced. However, the changes in MoDCs of the endothelial IL-8 downregulation co-culture group were the opposite. CONCLUSIONS: PCV2-induced endothelial IL-8 reduces the adhesion and migration ability of MoDCs, resulting in a decreased maturation rate of MoDCs, and further inhibits antigen presentation by DCs. These results may explain the immunosuppressive mechanism of PCV2 from the perspective of the interaction between endothelial cells and DCs in vitro.