ABSTRACT
High-energy Li metal batteries (LMBs) consisting of Li metal anodes and high-voltage cathodes are promising candidates of the next generation energy-storage systems owing to their ultrahigh energy density. However, it is still challenging to develop high-voltage nonflammable electrolytes with superior anode and cathode compatibility for LMBs. Here, we propose an active diluent-anion synergy strategy to achieve outstanding compatibility with Li metal anodes and high-voltage cathodes by using 1,2-difluorobenzene (DFB) with high activity for yielding LiF as an active diluent to regulate nonflammable dimethylacetamide (DMAC)-based localized high concentration electrolyte (LHCE-DFB). DFB and bis(fluorosulfonyl)imide (FSI- ) anion cooperate to construct robust LiF-rich solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI), which effectively stabilize DMAC from intrinsic reactions with Li metal anode and enhance the interfacial stability of the Li metal anodes and LiNi0.8 Co0.1 Mn0.1 O2 (NCM811) cathodes. LHCE-DFB enables ultrahigh Coulombic efficiency (98.7 %), dendrite-free, extremely stable and long-term cycling of Li metal anodes in Li || Cu cells and Li || Li cells. The fabricated NCM811 || Li cells with LHCE-DFB display remarkably enhanced long-term cycling stability and excellent rate capability. This work provides a promising active diluent-anion synergy strategy for designing high-voltage electrolytes for high-energy batteries.
ABSTRACT
Delicate design and precise manipulation of electrode morphology has always been crucial in electrochemistry. Generally, porous morphology has been preferred due to the fast kinetic transport characteristics of cations. Nevertheless, more refined design details such as the granularity uniformity that usually goes along with the porosity regulation of film electrodes should be taken into consideration, especially in long-term cation insertion and extraction. Here, inorganic electrochromism as a special member of the electrochemical family and WO3 films as the most mature electrochromic electrode material were chosen as the research background. Two kinds of WO3 films were prepared by magnetron sputtering, one with a relatively loose morphology accompanied by nonuniform granularity and one with a compact morphology along with uniform particle size distribution, respectively. Electrochemical performances and cyclic stability of the two film electrodes were then traced and systematically compared. In the beginning, except for faster kinetic transport characters of the 50 W-deposited WO3 film, the two electrodes showed equivalent optical and electrochemical performances. However, after 5000 CV cycles, the 50 W-deposited WO3 film electrode cracked seriously. Strong stress distribution centered among boundaries of the nonuniform particle clusters together with the weak bonding among particles induced the mechanical damage. This discovery provides a more solid background for further delicate film electrode design.
ABSTRACT
A flexible thermoelectric device has been considered as a competitive candidate for powering wearable electronics. Here, we fabricated an n-type Ag2Se/Ag composite film on a flexible nylon substrate using vacuum-assisted filtration and a combination of cold and hot pressing. By optimising the Ag/Se ratio and the sequential addition and reaction time of AA, an excellent power factor of 2277.3 µWâm-1 K-2 (corresponding to a ZT of ~0.71) at room temperature was achieved. In addition, the Ag2Se/Ag composite film exhibits remarkable flexibility, with only 4% loss and 10% loss in electrical conductivity after being bent around a rod of 4 mm radius for 1000 cycles and 2000 cycles, respectively. A seven-leg flexible thermoelectric device assembled with the optimised film demonstrates a voltage of 19 mV and a maximum power output of 3.48 µW (corresponding power density of 35.5 W m-2) at a temperature difference of 30 K. This study provides a potential path to design improved flexible TE devices.
ABSTRACT
High-concentration electrolytes (HCEs) can effectively enhance interface stability and cycle performance of Li metal batteries (LMBs). However, HCEs suffer from low ionic conductivity, high viscosity, high cost, and high density. Herein, fluorobenzene (FB) diluted localized high-concentration electrolytes (LHCEs) consisting of lithium bis(fluorosulfonyl)imide (LiFSI)/triethyl phosphate (TEP)/FB are developed. 2.3 M LHCE can reserve concentrated Li+-FSI--TEP solvation structures. Diluent FB possesses low density, low viscosity, low cost, low dielectric constant, low LUMO, and a good fluorine-donating property, which can significantly reduce viscosity, improve ionic conductivity, promote the formation of LiF-rich SEI, and enhance interaction of Li+-TEP and Li+-FSI- ion-pairs of the electrolytes. 2.3 M LHCE is a highly safe nonflammable electrolyte. 2.3 M LHCE can effectively inhibit dendrite growth on Li metal anode. 2.3 M LHCE endows LiFePO4 cells with good rate capability (discharge capacity of 112.7 mAh g-1 at 5 C rate) and excellent cycling performance (capacity retention of 95.4% after 1000 cycles). 2.3 M LHCE also shows good compatibility with LiNi0.8Co0.1Mn0.1O2 and exhibits outstanding cycle stability (capacity retention of 86.4% after 500 cycles). Therefore, 2.3 M LHCE is a promising electrolyte for practical applications in LMBs.
