Cellulose-derived raw materials towards advanced functional transparent papers.

Pulp and paper are gradually transforming from a traditional industry into a new green strategic industry. In parallel, cellulose-derived transparent paper is gaining ground for the development of advanced functional materials for light management with eco-friendly, high performance, and multifunctionality. This review focuses on methods and processes for the preparation of cellulose-derived transparent papers, highlighting the characterization of raw materials linked to responses to different properties, such as optical and mechanical properties. The applications in electronic devices, energy conversion and storage, and eco-friendly packaging are also highlighted with the objective to showcase the untapped potential of cellulose-derived transparent paper, challenging the prevailing notion that paper is merely a daily life product. Finally, the challenges and propose future directions for the development of cellulose-derived transparent paper are identified.

Comparison of Endoscopic and Minimally Invasive Transforaminal Lumbar Interbody Fusion for Lumbar Degenerative Diseases: A Meta-analysis.

STUDY DESIGN: Systematic review and meta-analysis. OBJECTIVE: To compare the results of endoscopic transforaminal lumbar interbody fusion (Endo-TLIF) and minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF) for patients with lumbar degenerative diseases. SUMMARY OF BACKGROUND DATA: The MIS-TLIF has been widely used in lumbar degenerative diseases and achieved favorable clinical effects. The main disadvantage is the limited working space and visualization, especially in the deeper operational field, for preparing fusion bed. In recent years, with the development of surgical techniques, optical technology, and special instruments, Endo-TLIF has gradually been applied. MATERIALS AND METHODS: A systematic review and meta-analysis of cohort studies between Endo-TLIF and MIS-TLIF in the lumbar degenerative diseases. The following outcome measures were extracted: visual analog scale (VAS), Oswestry Disability Index, fusion rate, disk height, segmental lordosis, operative time, length of hospital stay and complications. Data analysis was performed by RevMan 5.3. RESULTS: Eight studies comprising 687 patients were included in this meta-analysis. The pooled result revealed there was no significant differences in the VAS of leg, Oswestry Disability Index, fusion rate, disk height, segmental lordosis, and complication rate between the 2 groups ( P >0.05). However, the VAS of back in the Endo-TLIF group was significantly less than those in the MIS-TLIF group within 2 weeks after surgery [weighted mean difference (WMD)=-1.33 (-1.98, -0.68), P <0.0001] and at 3 months postoperatively [WMD=-0.72(-0.85, -0.59), P <0.00001]. The Endo-TLIF group also seemed to fewer VAS of back at the last follow-up (≥12 mo) [WMD=-0.12 (-0.25, -0.00), P =0.05]. Compared with the MIS-TLIF group, the Endo-TLIF group was associated with longer operation time [WMD=26.74 (2.14, 51.34), P =0.03], but shorter length of hospital stay [WMD=-1.98(-2.91, -1.05), P <0.0001]. CONCLUSIONS: Compared with minimally invasive TLIF, endoscopic TLIF achieved comparable improvement of symptoms and intervertebral fusion, longer operation time, and smaller surgical trauma. Endoscopic TLIF, which requires a demanding learning curve, maybe a feasible and effective technique for the patients with symptomatic lumbar degenerative diseases.

Discrimination of Traditional Chinese Medicine Syndromes in Type 2 Diabetic Patients Based on Metabolomics-Proteomics Profiles.

Materials and Methods: The metabolomics-proteomics of sixty patients with T2DM were acquired by high-performance liquid chromatography (HPLC). In addition, some clinical features, containing total cholesterol (TC), triglycerides (TG), hemoglobin A1c (HbA1c), body mass index (BMI), and low-density lipoprotein (LDL) together with high-density lipoprotein (HDL), were determined via clinical detection strategies. Abundant metabolites and proteins, respectively, were identified with the analysis of liquid chromatography tandem mass spectrometry (LC-MS/MS). Results: 22 differentially abundant metabolites and 15 differentially abundant proteins were determined. The analysis of bioinformatics suggested that the differentially abundant proteins were commonly associated with the renin-angiotensin system, vitamin digestion and absorption, hypertrophic cardiomyopathy, and so on. Furthermore, differentially abundant metabolites were amino acids and were associated with the biosynthesis of CoA and pantothenate, together with the metabolisms of phenylalanine, beta-alanine, proline, and arginine. Combination analysis revealed that the vitamin metabolism pathway was predominantly affected. Conclusions: DHS syndrome can be separated by certain metabolic-proteomic differences, and metabolism is particularly prominent, especially in vitamin digestion and absorption. From the molecular level, we provide preliminary data for the extensive application of TCM in the study of T2DM, and at the same time benefited in a sense diagnosis and treatment of T2DM.

Carbonation Behavior of Engineered Cementitious Composites under Coupled Sustained Flexural Load and Accelerated Carbonation.

Engineered cementitious composites (ECCs) belong to a broad class of fibre-reinforced concrete. They incorporate synthetic polyvinyl alcohol (PVA) fibres, cement, fly ash and fine aggregates, and are designed to have a tensile strain capacity typically beyond 3%. This paper presents an investigation on the carbonation behaviour of engineered cementitious composites (ECCs) under coupled sustained flexural load and accelerated carbonation. The carbonation depth under a sustained stress level of 0, 0.075, 0.15, 0.3 and 0.6 relative to flexural strength was measured after 7, 14 and 28 days of accelerated carbonation. Thermogravimetric analysis, mercury intrusion porosimetry and microhardness measurements were carried out to show the coupled influence of sustained flexural load and accelerated carbonation on the changes of the mineral phases, porosity, pore size distribution and microhardness along the carbonation profile. A modified carbonation depth model that can be used to consider the coupled effect of flexural tensile stress and carbonation time was proposed. The results show that an exponential relationship can be observed between stress influence coefficient and flexural tensile stress level in the carbonation depth model of ECC, which is different when using plain concrete. Areas with a higher carbonation degree have greater microhardness, even under a large sustained load level, as the carbonation process refines the pore structure and the fibre bridges the crack effectively.

Time and Crack Width Dependent Model of Chloride Transportation in Engineered Cementitious Composites (ECC).

This paper aims to develop a chloride transport model of engineered cementitious composites (ECC) that can consider the influence of both exposure time and crack width. ECC specimens with crack widths of 0.1 mm, 0.2 mm and 0.3 mm were soaked into NaCl solution with periods of 30, 60, 90 and 120 days. The free chloride content profile was measured and used for the development of the transport model. Regression analysis was applied to build the time and crack width dependent models of apparent diffusion coefficient and surface chloride content. The results show that the crack width has significant influence on the free chloride concentration profile when it is above 0.2 mm and the time-dependent constant n decreases linearly with the crack width. The chloride transport model was obtained by subscribing the models of apparent diffusion coefficient and surface chloride content into the analytical solution of Fick's second law. The model was further validated with the experimental results, showing a deviation within 20%. The findings of the presented study can enhance the current understanding on the chloride transportation in ECC.

Behavior of Engineered Cementitious Composites (ECCs) Subjected to Coupled Sustained Flexural Load and Salt Frost.

The performance of engineered cementitious composites (ECCs) under coupled salt freezing and loaded conditions is important for its application on the transportation infrastructure. However, in most of the studies, the specimens were generally loaded prior to the freezing. The influence of sustained load was merely considered. To this end, four sustained deflection levels, i.e., 0%, 10%, 30% and 50% of the deflection at the ultimate flexural strength, and three salt concentrations (1%, 3% and 5%) were applied. Prior to the salt frost resistance test, the fluid absorption of ECC specimens under various conditions were measured. The changes in relative dynamic elastic modulus (RDEM) during the freeze-thaw cycles were captured. The depth and the content profile of free chloride were measured after the coupled sustained load and freezing and thawing cycles. It is shown that 3% NaCl solution leads to the largest deterioration in all cases. There is no visible flaking or damage occurring on the surface. The relationships between locally sustained flexural stress and RDEM loss and also locally sustained flexural stress and free chloride penetration depth were proposed and showed satisfactory results. It is concluded that when ECC is subjected to the FTCs under 1% de-ice salt solution, no depassivation of the steel is expected even under a large deflection level. In terms of 3% and 5% salt solution, the thickness of cover should be no less than 20 mm when a deflection level of 0.5 is applied.

Salvianic Acid A Regulates High-Glucose-Treated Endothelial Progenitor Cell Dysfunction via the AKT/Endothelial Nitric Oxide Synthase (eNOS) Pathway.

BACKGROUND The primary cause of death in patients with diabetes mellitus (DM) is diabetic macroangiopathy, a complication that related to the function and number of endothelial progenitor cells (EPCs). Salvianic acid A (SAA) is a water-soluble active ingredient of Salvia miltiorrhiza, a traditional Chinese medicine used to treat cardiovascular diseases. The purpose of this study was to explore the effects of SAA on the function of rat EPCs cultured in vitro in a high-glucose environment. MATERIAL AND METHODS Bone marrow-derived EPCs from 40 Sprague-Dawley rats were identified by fluorescence staining. Cell viability, apoptosis, tube formation, lactated dehydrogenase (LDH) release, and nitric oxide (NO) production were detected by 3-[4,5-dimethylthylthiazol-2-yl]-2,5 diphenyltetrazolium bromide assay, flow cytometry, tube formation, LDH, and 3-amino,4-aminomethyl-2',7'-difluorescein, and diacetate assays, respectively. The expression levels of proteins were examined by western blotting. RESULTS Cultured EPCs showed a cobblestone morphology and positive expression of Dil-ac-LDL and FITC-UEA-1. High glucose impaired cell viability. Different concentrations of SAA had no significant effect on EPC viability. SAA reduced the apoptosis rate and LDH release, but promoted tube formation, viability, and NO production in high-glucose-treated EPCs. The ratios of p-AKT/AKT and p-eNOS/eNOS in high-glucose-treated EPCs were elevated by SAA. Phosphoinositide 3-kinase inhibitor LY294002 blocked the rescue effects of SAA on high-glucose-treated EPCs. CONCLUSIONS SAA protected EPCs against high-glucose-induced dysfunction via the AKT/eNOS pathway.

A Feasibility Study of Low Cement Content Foamed Concrete Using High Volume of Waste Lime Mud and Fly Ash for Road Embankment.

This paper aims to study the feasibility of low cement content foamed concrete using waste lime mud (LM) and fly ash (FA) as mineral additives. The LM/FA ratio was first optimized based on the compressive strength. Isothermal calorimetry test, ESEM, and XRD were used to investigate the role of LM during hydration. Afterward, the optimized LM/FA ratio (1/5) was used to design foamed concrete with various wet densities (600, 700, 800 and 900 kg/m3) and LM-FA dosages (0%, 50%, 60%, 70% and 80%). Flowability measurements and mechanical measurements including compressive strength, flexural strength, splitting strength, elastic modulus, and California bearing ratio were conducted. The results show that the foamed concretes have excellent workability and stability with flowability within 170 and 190 mm. The high alkalinity of LM accelerated the hydration of FA, thereby increasing the early strength. The significant power functions were fitted for the relationships between flexural/splitting and compressive strength with all correlation coefficients (R2) larger with 0.95. The mechanical properties of the foamed concrete increased with the density increasing or LM-FA dosage decreasing. The compressive strength, tensile strength, CBR of all prepared foamed concretes were higher than the minimum requirements of 0.8 and 0.15 MPa and 8%, respectively in the standard.