Foundry-based waveguide-enhanced Raman spectroscopy in the visible.

Waveguide-enhanced Raman spectroscopy (WERS) is an analytical technique frequently employed for chemical and biological sensing. Operation at visible wavelengths to harness the inverse fourth power with excitation wavelength signal scaling of Raman scattering intensity is desirable, to combat the inherent inefficiency of Raman spectroscopy. Until now, WERS demonstrations in the visible have required custom materials and fabrication, resulting in high losses and low yields. In this work, we demonstrate a silicon nitride (SIN) visible WERS platform fabricated in a 300 mm complementary metal-oxide semiconductor (CMOS) foundry. We measure the propagation loss, coupling loss, WERS signal, and background for WERS spirals designed for 532 nm and 633 nm pump wavelengths. We compare these results to the state-of-the-art near-infrared WERS platform at 785 nm. Further, we theoretically validate the relative performance of each of these WERS configurations, and we discuss the optimal WERS configuration at visible wavelengths. We conclude that a configuration optimized for 785 nm pumping provides the greatest signal-to-background ratio in the fingerprint region of the spectrum, and pumping at 633 nm maximizes Stokes signal out to 3000 cm-1.

Quantitative Raman Cross-Sections and Band Assignments for Fentanyl and Fentanyl Analogs.

Raman cross sections and spectra were measured for five synthetic opioid fentanyl analogs: fentanyl citrate, sufentanil citrate, alfentanil HCl, carfentanil oxalate, and remifentanil HCl. The measurements were performed with excitation wavelengths in the visible (532 nm) and near infrared (785 nm). In addition, density functional theory (DFT) calculations were employed to generate simulated spectra of the compounds and aid in identification of the observed spectral modes. These cross-section measurements and calculations were also used to assess results from a series of measurements of fentanyls cut with other powdered materials. These measurements are valuable for assessment of field-deployable Raman chemical sensors for detection of fentanyl and fentanyl analogs, including when mixed with other materials.

Effect of substituents on surface equilibria of thiophenols and isoquinolines on gold substrates studied using surface-enhanced Raman spectroscopy.

The effect of substituents on the surface adsorption equilibria of thiophenols and isoquinolines on gold substrates was studied using surface-enhanced Raman spectroscopy (SERS) in order to determine the effects of the localized dipole moments and charge donating/withdrawing properties on the binding affinity. Two common classes of molecules used in SERS studies were examined, which included substituted aromatic thiols and nitrogen heterocyclic aromatic molecules (azaarenes), due to their strong affinity for gold surfaces. Unsubstituted thiophenol in aqueous solution binds strongly to gold surfaces. Therefore, it is difficult to measure an equilibrium constant, since even at concentrations of 10-8 M nearly a complete self-assembled monolayer (SAM) forms. In contrast, substituted thiophenols with electron-withdrawing groups, such as halogenated thiophenols, bind much less strongly, allowing equilibrium constants to be obtained. It is believed that the substituent withdrawing charge away from the sulfur atom affects the adsorption/binding between the analyte and surface. Thiophenols substituted with electron donating groups behaved similar to unsubstituted thiophenol, where a SAM was observed at concentrations as low as 10-8 M. These functional groups did not hinder the ability of the sulfur groups to bind with gold. In addition, a series of bromine-substituted isoquinolines, a group of azaarene compounds, were measured to determine the effects that the bromine substituent has when it is bound to the two different rings and if position on the rings has an effect. The azaarene class of molecules, including isoquinoline, adsorbs less strongly than thiophenols, and a dual Langmuir isotherm phenomenon is observed where protonated and neutral bromoisoquinoline molecules occupy two different types of sites on Klarite substrates, which consist of inverted micro-pyramids on Si wafers with rough/nanostructured Au coatings. Protonated isoquinolines bind to nucleophilic sites on the substrates which tend to occur on flatter regions of the substrate. By contrast, neutral isoquinolines bind to electrophilic sites which are predominant near microscopic edges on the substrate. The presence of the bromine substituent and its position in the fused ring structure changes the Gibbs free energies of adsorption, depending on which ring the substituent is in. These results can help to guide the development of SERS for analytical applications by demonstrating how changes in functional groups can affect the equilibrium constants, which are critical for determining the effectiveness of SERS as a tool for trace detection of analytes.

Optimization of Surface-Enhanced Raman Spectroscopy Conditions for Implementation into a Microfluidic Device for Drug Detection.

A microfluidic device is being developed by University of California-Santa Barbara as part of a joint effort with the United States Army to develop a portable, rapid drug detection device. Surface-enhanced Raman spectroscopy (SERS) is used to provide a sensitive, selective detection technique within the microfluidic platform employing metallic nanoparticles as the SERS medium. Using several illicit drugs as analytes, the work presented here describes the efforts of the Edgewood Chemical Biological Center to optimize the microfluidic platform by investigating the role of nanoparticle material, nanoparticle size, excitation wavelength, and capping agents on the performance, and drug concentration detection limits achievable with Ag and Au nanoparticles that will ultimately be incorporated into the final design. This study is particularly important as it lays out a systematic comparison of limits of detection and potential interferences from working with several nanoparticle capping agents-such as tannate, citrate, and borate-which does not seem to have been done previously as the majority of studies only concentrate on citrate as the capping agent. Morphine, cocaine, and methamphetamine were chosen as test analytes for this study and were observed to have limits of detection (LOD) in the range of (1.5-4.7) × 10-8 M (4.5-13 ng/mL), with the borate capping agent having the best performance.

Critical role of adsorption equilibria on the determination of surface-enhanced Raman enhancement.

Surface-enhanced Raman spectroscopy (SERS) is a useful technique for probing analyte-noble metal interactions and determining thermodynamic properties such as their surface reaction equilibrium constants and binding energies. In this study, we measure the binding equilibrium constants and Gibbs free energy of binding for a series of nitrogen-containing aromatic molecules adsorbed on Klarite substrates. A dual Langmuir dependence of the SERS intensity on concentration was observed for the six species studied, indicating the presence of at least two different binding energies. We relate the measured binding energies to the previously described SERS enhancement value (SEV) and show that the SEV is proportional to the traditional SERS enhancement factor G, with a constant of proportionality that is critically dependent on the adsorption equilibrium constant determined from the dual Langmuir isotherm. We believe the approach described is generally applicable to many SERS substrates, both as a prescriptive approach to determining their relative performance and as a probe of the substrate's affinity for a target adsorbate.

Selective detection of 1000 B. anthracis spores within 15 minutes using a peptide functionalized SERS assay.

A surface-enhanced Raman spectroscopy (SERS) assay has been designed to detect Bacillus anthracis spores. The assay consists of silver nanoparticles embedded in a porous glass structure that have been functionalized with ATYPLPIR, a peptide developed to discriminately bind B. anthracis versus other species of Bacillus. Once bound, acetic acid was used to release the biomarker dipicolinic acid from the spores, which was detected by SERS through the addition of silver colloids. This SERS assay was used to selectively bind B. anthracis with a 100-fold selectivity versus B. cereus, and to detect B. anthracis Ames at concentrations of 1000 spores per mL within 15 minutes. The SERS assay measurements provide a basis for the development of systems that can detect spores collected from the air or from water supplies.

Recent advances and remaining challenges for the spectroscopic detection of explosive threats.

In 2010, the U.S. Army initiated a program through the Edgewood Chemical Biological Center to identify viable spectroscopic signatures of explosives and initiate environmental persistence, fate, and transport studies for trace residues. These studies were ultimately designed to integrate these signatures into algorithms and experimentally evaluate sensor performance for explosives and precursor materials in existing chemical point and standoff detection systems. Accurate and validated optical cross sections and signatures are critical in benchmarking spectroscopic-based sensors. This program has provided important information for the scientists and engineers currently developing trace-detection solutions to the homemade explosive problem. With this information, the sensitivity of spectroscopic methods for explosives detection can now be quantitatively evaluated before the sensor is deployed and tested.

Toward understanding the influence of intermolecular interactions and molecular orientation on the chemical enhancement of SERS.

Implementation of SERS as an analytical technique is limited because the factors that govern the enhancement of individual vibrational modes are not well understood. Although the chemical effect only accounts for up to two orders of magnitude enhancement, it can still have a significant impact on the consistency of chemical spectral signatures. We report on a combined theoretical and experimental study on the benzenethiol on silver and 4-mercaptophenol on silver systems. The primary and unique finding was that for the benzenethiol on silver system the inclusion of interaction between multiple benzenethiol analyte molecules was essential to account for the relative enhancements observed experimentally. An examination of the molecular orbitals showed sharing of electron density across the entire model of multiple benzenethiol molecules mediated by the metal atoms. The addition of multiple 4-mercaptophenol molecules to the theoretical model had little effect on the predicted spectra, and we attribute this to the fact that a much larger model is necessary to replicate the networks of hydrogen bonds. Molecular orientation was also found to affect the predicted spectra, and it was found that an upright position improved agreement between theoretical and experimental spectra. An analysis of the vibrational frequency shifts between the normal Raman spectrum of the neat compound and the SERS spectrum also suggests that both benzenethiol and 4-mercaptophenol are in an upright position.

Ultraviolet resonance Raman spectroscopy of explosives in solution and the solid state.

Resonance Raman cross sections of common explosives have been measured by use of excitation wavelengths in the deep-UV from 229 to 262 nm. These measurements were performed both in solution and in the native solid state for comparison. While measurements of UV Raman cross sections in solution with an internal standard are straightforward and commonly found in the literature, measurements on the solid phase are rare. This is due to the difficulty in preparing a solid sample in which the molecules of the internal standard and absorbing analyte/explosive experience the same laser intensity. This requires producing solid samples that are mixtures of strongly absorbing explosives and an internal standard transparent at the UV wavelengths used. For the solid-state measurements, it is necessary to use nanostructured mixtures of the explosive and the internal standard in order to avoid this bias due to the strong UV absorption of the explosive. In this study we used a facile spray-drying technique where the analyte of interest was codeposited with the nonresonant standard onto an aluminum-coated microscope slide. The generated resonance enhancement profiles and quantitative UV-vis absorption spectra were then used to plot the relative Raman return as a function of excitation wavelength and particle size.

Surface-enhanced Raman scattering (SERS) evaluation protocol for nanometallic surfaces.

We present the results of a three-year collaboration between the U.S. Army Edgewood Chemical Biological Center and the U.S. Army Research Laboratory-Aldelphi Laboratory Center on the evaluation of selected nanometallic surfaces developed for the Defense Advanced Research Projects Agency Surface-Enhanced Raman Scattering (SERS) Science and Technology Fundamentals program. The primary role of the two Army labs was to develop the analytical and spectroscopic figures of merit to unambiguously compare the sensitivity and reproducibility of various SERS substrates submitted by the program participants. We present the design and implementation of an evaluation protocol for SERS active surfaces enabling an enhancement value calculation from which different substrates can be directly compared. This method was established to: (1) collect physical and spectral characterization data from the small number of substrates (performer supplied) typically encountered, and (2) account for the complex fabrication technique and varying nature of the substrate platforms encountered within this program.

Comparison of visible and near-infrared Raman cross-sections of explosives in solution and in the solid state.

Raman cross-sections of explosives in solution and in the solid state have been measured using visible and near-infrared excitation via secondary calibration. These measurements are valuable for both fundamental scientific purposes and applications in the standoff detection of explosives. The explosive compounds RDX, HMX, TNT, 2,4-DNT, 2,6-DNT, and ammonium nitrate were measured using discrete excitation wavelengths ranging from 532 nm to 785 nm. A comparison of the spectral features and cross-sections between the solid state and solution was performed. Comparison is also made to cross-sections measured with deep ultraviolet excitation.

Characterization of polymorphic states in energetic samples of 1,3,5-trinitro-1,3,5-triazine (RDX) fabricated using drop-on-demand inkjet technology.

The United States Army and the first responder community are evaluating optical detection systems for the trace detection of hazardous energetic materials. Fielded detection systems must be evaluated with the appropriate material concentrations to accurately identify the residue in theater. Trace levels of energetic materials have been observed in mutable polymorphic phases and, therefore, the systems being evaluated must be able to detect and accurately identify variant sample phases observed in spectral data. In this work, we report on the novel application of drop-on-demand technology for the fabrication of standardized trace 1,3,5-trinitro-1,3,5-triazine (RDX) samples. The drop-on-demand sample fabrication technique is compared both visually and spectrally to the more commonly used drop-and-dry technique. As the drop-on-demand technique allows for the fabrication of trace level hazard materials, concerted efforts focused on characterization of the polymorphic phase changes observed with low concentrations of RDX commonly used in drop-on-demand processing. This information is important when evaluating optical detection technologies using samples prepared with a drop-on-demand inkjet system, as the technology may be "trained" to detect the common bulk α phase of the explosive based on its spectral features but fall short in positively detecting a trace quantity of RDX (ß-phase). We report the polymorphic shifts observed between α- and ß-phases of this energetic material and discuss the conditions leading to the favoring of one phase over the other.

Semi-automated detection of trace explosives in fingerprints on strongly interfering surfaces with Raman chemical imaging.

We have previously demonstrated the use of wide-field Raman chemical imaging (RCI) to detect and identify the presence of trace explosives in contaminated fingerprints. In this current work we demonstrate the detection of trace explosives in contaminated fingerprints on strongly Raman scattering surfaces such as plastics and painted metals using an automated background subtraction routine. We demonstrate the use of partial least squares subtraction to minimize the interfering surface spectral signatures, allowing the detection and identification of explosive materials in the corrected Raman images. The resulting analyses are then visually superimposed on the corresponding bright field images to physically locate traces of explosives. Additionally, we attempt to address the question of whether a complete RCI of a fingerprint is required for trace explosive detection or whether a simple non-imaging Raman spectrum is sufficient. This investigation further demonstrates the ability to nondestructively identify explosives on fingerprints present on commonly found surfaces such that the fingerprint remains intact for further biometric analysis.

Bioaerosol analysis with Raman chemical imaging microspectroscopy.

Raman chemical imaging microspectroscopy is evaluated as a technology for waterborne pathogen and bioaerosol detection. Raman imaging produces a three-dimensional data cube consisting of a Raman spectrum at every pixel in a microscope field of view. Binary and ternary mixtures including combinations of polystyrene beads, gram-positive Bacillus anthracis, B. thuringiensis, and B. atrophaeus spores, and B. cereus vegetative cells were investigated by Raman imaging for differentiation and characterization purposes. Bacillus spore aerosol sizes were varied to provide visual proof for corroboration of spectral assignments. Conventional applications of Raman imaging consist of differentiating relatively broad areas of a sample in a microscope field of view. The spectral angle mapping data analysis algorithm was used to compare a library spectrum with experimental spectra from pixels in the microscope field of view. This direct one-to-one matching is straightforward, does not require a training set, is independent of absolute spectral intensity, and only requires univariate statistics. Raman imaging is expanded in its capabilities to differentiate and distinguish between discrete 1-6 microm size bacterial species in single particles, clusters of mixed species, and bioaerosols with interference background particles.