Unlocking the Potential of Deep Eutectic Solvents and Ligand-to-Metal Charge Transfer Processes: A Reusable Iron-and-UV-Based System for Sustainable C-C Bond Formation.

Catalytic C-H functionalization has provided new opportunities to access novel organic molecules more sustainably and efficiently. However, these procedures typically rely on precious metals or complex organic catalysts as well as on hazardous solvents or reaction conditions. Herein, a pioneering methodology for direct C-C bond formation enabled by Ligand-to-Metal Charge Transfer (LMCT) and mediated by UV irradiation has been developed using Deep Eutectic Solvents (DESs) as sustainable reaction media. This direct C-H bond functionalization via a radical addition to electrophiles was successfully confirmed over a broad scope of substrates. More importantly, this is the first example of photocatalytic C-C bond formation in DESs. An inexpensive and abundant iron catalyst (FeCl3) was used under air and mild conditions. Different functional groups were well tolerated obtaining promising results that were comparable to those reported in the literature. Additionally, the reaction medium along with the catalyst could be reused for up to 5 consecutive cycles without a significant loss in the reaction outcome. Several green metrics were calculated and compared to those of conventional procedures, revealing the advantages of using DESs.

Photoelectrochemical CO2 Reduction at a Direct CuInGaS2/Electrolyte Junction.

Photoelectrochemical (PEC) CO2 reduction has received considerable attention given the inherent sustainability and simplicity of directly converting solar energy into carbon-based chemical fuels. However, complex photocathode architectures with protecting layers and cocatalysts are typically needed for selective and stable operation. We report herein that bare CuIn0.3Ga0.7S2 photocathodes can drive the PEC CO2 reduction with a benchmarking 1 Sun photocurrent density of over 2 mA/cm2 (at -2 V vs Fc+/Fc) and a product selectivity of up to 87% for CO (CO/all products) production while also displaying long-term stability for syngas production (over 44 h). Importantly, spectroelectrochemical analysis using PEC impedance spectroscopy (PEIS) and intensity-modulated photocurrent spectroscopy (IMPS) complements PEC data to reveal that tailoring the proton donor ability of the electrolyte is crucial for enhancing the performance, selectivity, and durability of the photocathode. When a moderate amount of protons is present, the density of photogenerated charges accumulated at the interface drops significantly, suggesting a faster charge transfer process. However, with a high concentration of proton donors, the H2 evolution reaction is preferred.

Efficient Electrochemical Nitrate Reduction to Ammonia with Copper-Supported Rhodium Cluster and Single-Atom Catalysts.

The electrochemical nitrate reduction reaction (NITRR) provides a promising solution for restoring the imbalance in the global nitrogen cycle while enabling a sustainable and decentralized route to source ammonia. Here, we demonstrate a novel electrocatalyst for NITRR consisting of Rh clusters and single-atoms dispersed onto Cu nanowires (NWs), which delivers a partial current density of 162 mA cm-2 for NH3 production and a Faradaic efficiency (FE) of 93 % at -0.2 V vs. RHE. The highest ammonia yield rate reached a record value of 1.27 mmol h-1 cm-2 . Detailed investigations by electron paramagnetic resonance, in situ infrared spectroscopy, differential electrochemical mass spectrometry and density functional theory modeling suggest that the high activity originates from the synergistic catalytic cooperation between Rh and Cu sites, whereby adsorbed hydrogen on Rh site transfers to vicinal *NO intermediate species adsorbed on Cu promoting the hydrogenation and ammonia formation.

Bulk Heterojunction Organic Semiconductor Photoanodes: Tuning Energy Levels to Optimize Electron Injection.

The use of a bulk heterojunction of organic semiconductors to drive photoelectrochemical water splitting is an emerging trend; however, the optimum energy levels of the donor and acceptor have not been established for photoanode operation with respect to electrolyte pH. Herein, we prepare a set of donor polymers and non-fullerene acceptors with varying energy levels to probe the effect of photogenerated electron injection into a SnO2-based substrate under sacrificial photo-oxidation conditions. Photocurrent density (for sacrificial oxidation) up to 4.1 mA cm-2 was observed at 1.23 V vs reversible hydrogen electrode in optimized photoanodes. Moreover, we establish that a lower-lying donor polymer leads to improved performance due to both improved exciton separation and better charge collection. Similarly, lower-lying acceptors also give photoanodes with higher photocurrent density but with a later photocurrent onset potential and a narrower range of pH for good operation due to the Nernstian behavior of the SnO2, which leads to a smaller driving force for electron injection at high pH.

Identifying Reactive Sites and Surface Traps in Chalcopyrite Photocathodes.

Gathering information on the atomic nature of reactive sites and trap states is key to fine tuning catalysis and suppressing deleterious surface voltage losses in photoelectrochemical technologies. Here, spectroelectrochemical and computational methods were combined to investigate a model photocathode from the promising chalcopyrite family: CuIn0.3 Ga0.7 S2 . We found that voltage losses are linked to traps induced by surface Ga and In vacancies, whereas operando Raman spectroscopy revealed that catalysis occurred at Ga, In, and S sites. This study allows establishing a bridge between the chalcopyrite's performance and its surface's chemistry, where avoiding formation of Ga and In vacancies is crucial for achieving high activity.

Benzodithiophene-Based Spacers for Layered and Quasi-Layered Lead Halide Perovskite Solar Cells.

Incorporating extended pi-conjugated organic cations in layered lead halide perovskites is a recent trend promising to merge the fields of organic semiconductors and lead halide perovskites. Herein, we integrate benzodithiophene (BDT) into Ruddlesden-Popper (RP) layered and quasi-layered lead iodide thin films (with methylammonium, MA) of the form (BDT)2 MAn-1 Pbn I3n+1 . The importance of tuning the ligand chemical structure is shown as an alkyl chain length of at least six carbon atoms is required to form a photoactive RP (n=1) phase. With N=20 or 100, as prepared in the precursor solution following the formula (BDT)2 MAN-1 PbN I3N+1 , the performance and stability of devices surpassed those with phenylethylammonium (PEA). For N=100, the BDT cation gave a power conversion efficiency of up to 14.7 % vs. 13.7 % with PEA. Transient photocurrent, UV photoelectron spectroscopy, and Fourier transform infrared spectroscopy point to improved charge transport in the device active layer and additional electronic states close to the valence band, suggesting the formation of a Lewis adduct between the BDT and surface iodide vacancies.

A Direct Z-Scheme for the Photocatalytic Hydrogen Production from a Water Ethanol Mixture on CoTiO3/TiO2 Heterostructures.

Photocatalytic H2 evolution from ethanol dehydrogenation is a convenient strategy to store solar energy in a highly valuable fuel with potential zero net CO2 balance. Herein, we report on the synthesis of CoTiO3/TiO2 composite catalysts with controlled amounts of highly distributed CoTiO3 nanodomains for photocatalytic ethanol dehydrogenation. We demonstrate these materials to provide outstanding hydrogen evolution rates under UV and visible illumination. The origin of this enhanced activity is extensively analyzed. In contrast to previous assumptions, UV-vis absorption spectra and ultraviolet photoelectron spectroscopy (UPS) prove CoTiO3/TiO2 heterostructures to have a type II band alignment, with the conduction band minimum of CoTiO3 below the H2/H+ energy level. Additional steady-state photoluminescence (PL) spectra, time-resolved PL spectra (TRPLS), and electrochemical characterization prove such heterostructures to result in enlarged lifetimes of the photogenerated charge carriers. These experimental evidence point toward a direct Z-scheme as the mechanism enabling the high photocatalytic activity of CoTiO3/TiO2 composites toward ethanol dehydrogenation. In addition, we probe small changes of temperature to strongly modify the photocatalytic activity of the materials tested, which could be used to further promote performance in a solar thermophotocatalytic reactor.

Generalized Synthesis to Produce Transparent Thin Films of Ternary Metal Oxide Photoelectrodes.

Developing facile approaches to prepare non-light-scattering ternary oxide thin film photoelectrodes is an important goal for solar water splitting tandem cells. Herein, a novel synthesis route is reported that employs ethylenediaminetetraacetic acid (EDTA) to enable compatible water solubility of diverse metal cations, which affords transparent films by solution processing. By using BiVO4 as a model material, a remarkable improvement in transparency is demonstrated, quantified by the direct transmittance at 600 nm of >80 % versus the <10 % observed with state-of-the-art electrodeposited thin films while maintaining reasonable solar-driven oxidation photocurrents (1.75 mA cm-2 in the presence of a sulfite hole scavenger). Furthermore, it is demonstrated that the synthesis technique can be applied in a general fashion towards the synthesis of diverse n- and p-type metal oxide materials, such as ZnFe2 O4 and CuFeO2 .

Establishing Stability in Organic Semiconductor Photocathodes for Solar Hydrogen Production.

As organic semiconductors attract increasing attention to application in the fields of bioelectronics and artificial photosynthesis, understanding the factors that determine their robust operation in direct contact with aqueous electrolytes becomes a critical task. Herein we uncover critical factors that influence the operational stability of donor:acceptor bulk heterojunction photocathodes for solar hydrogen production and significantly advance their performance under operational conditions. First, using the direct photoelectrochemical reduction of aqueous Eu3+ and impedance spectroscopy, we determine that replacing the commonly used fullerene-based electron acceptor with a perylene diimide-based polymer drastically increases operational stability and identify that limiting the photogenerated electron accumulation at the organic/water interface to values of ca. 100 nC cm-2 is required for stable operation (>12 h). These insights are extended to solar-driven hydrogen production using MoS3, MoP, or RuO2 water reduction catalyst overlayers where it is found that the catalyst morphology strongly affects performance due to differences in charge extraction. Optimized performance of bulk heterojunction photocathodes coated with a MoS3:MoP composite gave 1 Sun photocurrent density up to 8.7 mA cm-2 at 0 V vs RHE (pH 1). However, increased stability was gained with RuO2 where initial photocurrent density (>8 mA cm-2) deceased only 15% or 33% during continuous operation for 8 or 20 h, respectively, thus demonstrating unprecedented robustness without a protection layer. This performance represents a new benchmark for organic semiconductor photocathodes for solar fuel production and advances the understanding of stability criteria for organic semiconductor/water-junction-based devices.

Taking lanthanides out of isolation: tuning the optical properties of metal-organic frameworks.

Metal organic frameworks (MOFs) are increasingly used in applications that rely on the optical and electronic properties of these materials. These applications require a fundamental understanding on how the structure of these materials, and in particular the electronic interactions of the metal node and organic linker, determines these properties. Herein, we report a combined experimental and computational study on two families of lanthanide-based MOFs: Ln-SION-1 and Ln-SION-2. Both comprise the same metal and ligand but with differing structural topologies. In the Ln-SION-2 series the optical absorption is dominated by the ligand and using different lanthanides has no impact on the absorption spectrum. The Ln-SION-1 series shows a completely different behavior in which the ligand and the metal node do interact electronically. By changing the lanthanide in Ln-SION-1, we were able to tune the optical absorption from the UV region to absorption that includes a large part of the visible region. For the early lanthanides we observe intraligand (electronic) transitions in the UV region, while for the late lanthanides a new band appears in the visible. DFT calculations showed that the new band in the visible originates in the spatial orbital overlap between the ligand and metal node. Our quantum calculations indicated that Ln-SION-1 with late lanthanides might be (photo)conductive. Experimentally, we confirm that these materials are weakly conductive and that with an appropriate co-catalysts they can generate hydrogen from a water solution using visible light. Our experimental and theoretical analysis provides fundamental insights for the rational design of Ln-MOFs with the desired optical and electronic properties.

Lead Halide Perovskite Quantum Dots To Enhance the Power Conversion Efficiency of Organic Solar Cells.

The facile synthesis, solution-processability, and outstanding optoelectronic properties of emerging colloidal lead halide perovskite quantum dots (LHP QDs) makes them ideal candidates for scalable and inexpensive optoelectronic applications, including photovoltaic (PV) devices. The first demonstration of integrating CsPbI3 QDs into a conventional organic solar cell (OSC) involves embedding the LHP QDs in a donor-acceptor (PTB7-Th:PC71 BM) bulk heterojunction. Optimizing the loading amount at 3 wt %, we demonstrate a power conversion efficiency of 10.8 %, which is a 35 % increase over control devices, and is a record amongst hybrid ternary OSCs. Detailed investigation into the mechanisms behind the performance enhancement shows that increased light absorption is not a factor, but that increased exciton separation in the acceptor phase and reduced recombination are responsible.

Solution-Processed Ultrathin SnS2-Pt Nanoplates for Photoelectrochemical Water Oxidation.

Tin disulfide (SnS2) is attracting significant interest because of the abundance of its elements and its excellent optoelectronic properties in part related to its layered structure. In this work, we specify the preparation of ultrathin SnS2 nanoplates (NPLs) through a hot-injection solution-based process. Subsequently, Pt was grown on their surface via in situ reduction of a Pt salt. The photoelectrochemical (PEC) performance of such nanoheterostructures as photoanode toward water oxidation was tested afterwards. Optimized SnS2-Pt photoanodes provided significantly higher photocurrent densities than bare SnS2 and SnS2-based photoanodes of previously reported study. Mott-Schottky analysis and PEC impedance spectroscopy (PEIS) were used to analyze in more detail the effect of Pt on the PEC performance. From these analyses, we attribute the enhanced activity of SnS2-Pt photoanodes reported here to a combination of the very thin SnS2 NPLs and the proper electronic contact between Pt nanoparticles (NPs) and SnS2.

Spinel Structural Disorder Influences Solar-Water-Splitting Performance of ZnFe2 O4 Nanorod Photoanodes.

Zinc spinel ferrite, ZnFe2 O4 (ZFO), is an emerging photoanode material for photoelectrochemical (PEC) solar fuel production. However, a lack of fundamental insight into the factors limiting the photocurrent has prevented substantial advance in its performance. Herein, it is found that ZFO nanorod array photoelectrodes with varying crystallinity exhibit vastly different PEC properties. Using a sacrificial hole scavenger (H2 O2 ), spatially defined carrier generation, and electrochemical impedance spectroscopy, it is shown that ZFO with a relatively poor crystallinity but a higher spinel inversion degree (due to cation disorder) exhibits superior photogenerated charge separation efficiency and improved majority charge carrier transport compared to ZFO with higher crystallinity and a lower inversion degree. Conversely, the latter condition leads to better charge injection efficiency. Optimization of these factors, and the addition of a nickel-iron oxide cocatalyst overlayer, leads to a new benchmark solar photocurrent for ZFO of 1.0 mA cm-2 at 1.23 V versus reversible hydrogen electrode (RHE) and 1.7 mA cm-2 at 1.6 V versus RHE. Importantly, the observed correlation between the cation disorder and the PEC performance represents a new insight into the factors important to the PEC performance of the spinel ferrites and suggests a path to further improvement.

Defect Mitigation of Solution-Processed 2D WSe2 Nanoflakes for Solar-to-Hydrogen Conversion.

Few-atomic-layer nanoflakes of liquid-phase exfoliated semiconducting transition metal dichalcogenides (TMDs) hold promise for large-area, high-performance, low-cost solar energy conversion, but their performance is limited by recombination at defect sites. Herein, we examine the role of defects on the performance of WSe2 thin film photocathodes for solar H2 production by applying two separate treatments, a pre-exfoliation annealing and a post-deposition surfactant attachment, designed to target intraflake and edge defects, respectively. Analysis by TEM, XRD, XPS, photoluminescence, and impedance spectroscopy are used to characterize the effects of the treatments and photoelectrochemical (PEC) measurements using an optimized Pt-Cu cocatalyst (found to offer improved robustness compared to Pt) are used to quantify the performance of photocathodes (ca. 11 nm thick) consisting of 100-1000 nm nanoflakes. Surfactant treatment results in an increased photocurrent attributed to edge site passivation. The pre-annealing treatment alone, while clearly altering the crystallinity of pre-exfoliated powders, does not significantly affect the photocurrent. However, applying both defect treatments affords a considerable improvement that represents a new benchmark for the performance of solution-processed WSe2: solar photocurrents for H2 evolution up to 4.0 mA cm-2 and internal quantum efficiency over 60% (740 nm illumination). These results also show that charge recombination at flake edges dominates performance in bare TMD nanoflakes, but when the edge defects are passivated, internal defects become important and can be reduced by pre-annealing.

Amorphous Ternary Charge-Cascade Molecules for Bulk Heterojunction Photovoltaics.

Ternary bulk heterojunctions with cascade-type energy-level configurations are of significant interest for further improving the power conversion efficiency (PCE) of organic solar cells. However, controlling the self-assembly in solution-processed ternary blends remains a key challenge. Herein, we leverage the ability to control the crystallinity of molecular semiconductors via a spiro linker to demonstrate a simple strategy suggested to drive the self-assembly of an ideal charge-cascade morphology. Spirobifluorene (SF) derivatives with optimized energy levels from diketopyrrolopyrrole (DPP) or perylenediimide (PDI) components, coded as SF-(DPP)4 and SF-(PDI)4, are synthesized and investigated for application as ternary components in the host blend of poly(3-hexylthiophene-2,5-diyl):[6,6]phenyl-C61-butyric acid methyl ester (P3HT:PCBM). Differential scanning calorimetry and X-ray/electron diffraction studies suggest that at low loadings (up to 5 wt %) the ternary component does not perturb crystallization of the donor:acceptor host blend. In photovoltaic devices, up to 36% improvement in the PCE (from 2.5% to 3.5%) is found when 1 wt % of either SF-(DPP)4 or SF-(PDI)4 is added, and this is attributed to an increase in the fill factor and open-circuit voltage, while at higher loadings, the PCE decreased because of a lower short-circuit current density. A comparison of the quantum efficiency measurements [where light absorption of SF-(DPP)4 was found to give up to 95% internal conversion] suggests that improvement due to enhanced light absorption or to better exciton harvesting via resonance energy transfer is unlikely. These data, together with the crystallinity results, support the inference that the SF compounds are excluded to the donor:acceptor interface by crystallization of the host blend. This conclusion is further supported by impedance spectroscopy and a longer measured charge-carrier lifetime in the ternary blend.

Robust Hierarchically Structured Biphasic Ambipolar Oxide Photoelectrodes for Light-Driven Chemical Regulation and Switchable Logic Applications.

Tunable ambipolar photoelectrochemical behavior emerges from microdomains of nanostructured p-type CuFeO2 and n-type Fe2 O3 that arise from a single facile solution-processed thin film. The switchable operation of this system is controlled by chemical, optical, or electronic inputs with a uniquely high photocurrent response (on the order of 1 mA cm-2 ), suitable for robust practical application as an oxygen photoregulator.

Direct Light-Driven Water Oxidation by a Ladder-Type Conjugated Polymer Photoanode.

A conjugated polymer known for high stability (poly[benzimidazobenzophenanthroline], coded as BBL) is examined as a photoanode for direct solar water oxidation. In aqueous electrolyte with a sacrificial hole acceptor (SO3(2-)), photoelectrodes show a morphology-dependent performance. Films prepared by a dispersion-spray method with a nanostructured surface (feature size of ∼20 nm) gave photocurrents up to 0.23 ± 0.02 mA cm(-2) at 1.23 VRHE under standard simulated solar illumination. Electrochemical impedance spectroscopy reveals a constant flat-band potential over a wide pH range at +0.31 VNHE. The solar water oxidation photocurrent with bare BBL electrodes is found to increase with increasing pH, and no evidence of semiconductor oxidation was observed over a 30 min testing time. Characterization of the photo-oxidation reaction suggests H2O2 or •OH production with the bare film, while functionalization of the interface with 1 nm of TiO2 followed by a nickel-cobalt catalyst gave solar photocurrents of 20-30 µA cm(-2), corresponding with O2 evolution. Limitations to photocurrent production are discussed.

Artificial Photosynthesis with Semiconductor-Liquid Junctions.

Given the urgent need to develop a sustainable, carbon neutral energy storage system on a global scale, intense efforts are currently underway to advance the field of artificial photosynthesis: i.e. solar fuel engineering. In this review we give an overview of the field of artificial photosynthesis using a semiconductor-electrolyte interface employed in a photoelectrochemical device or as a heterogeneous photocatalyst. First we present a basic description of the operation principles of a semiconductor-liquid junction based device. The role of nanotechnology in the recent advances in the field is highlighted and common material systems under current study are briefly reviewed. The importance of the material surfaces are further scrutinized by presenting recent advances in interfacial engineering. Technical challenges and an outlook towards industrialization of the technology are given.

Self-assembled 2D WSe2 thin films for photoelectrochemical hydrogen production.

WSe2--a layered semiconductor that can be exfoliated into atomically thin two-dimensional sheets--offers promising characteristics for application in solar energy conversion. However, the lack of controllable, cost-effective methods to scalably fabricate homogeneous thin films currently limits practical application. Here we present a technique to prepare controlled thin films of 2D WSe2 from dispersions of solvent-exfoliated few-layer flakes. Flake self-assembly at a liquid/liquid interface (formed exceptionally from two non-solvents for WSe2) followed by substrate transfer affords large-area thin films with superior 2D flake alignment compared with traditional (liquid/air) self-assembly techniques. We further demonstrate, for the first time, solar-to-hydrogen conversion from solution-processed WSe2 thin films. Bare photoelectrodes with a thickness of ca. 25 nm exhibit sustained p-type photocurrent under simulated solar illumination, and up to 1.0 mA cm(-2) at 0 V versus reversible hydrogen electrode with an added water reduction catalyst (Pt). The importance of the self-assembled morphology is established by photoelectrochemical and conductivity measurements.

Templating Sol-Gel Hematite Films with Sacrificial Copper Oxide: Enhancing Photoanode Performance with Nanostructure and Oxygen Vacancies.

Nanostructuring hematite films is a critical step for enhancing photoelectrochemical performance by circumventing the intrinsic limitations on minority carrier transport. Herein, we present a novel sol-gel approach that affords nanostructured hematite films by including CuO as sacrificial templating agent. First, by annealing in air at 450 °C a film comprising an intimate mixture of CuO and Fe2O3 nanoparticles is obtained. The subsequent treatment with NaCl and annealing at 700 °C under Argon reveals a nanostructured highly crystalline hematite film devoid of copper. Photoelectrochemical investigations reveal that the incorporation of CuO as templating agent and the inert conditions employed during the annealing play a crucial role in the performance of the hematite electrodes. Mott-Schottky analysis shows a higher donor concentration when annealing in inert conditions, and even higher when combined with the NaCl treatment. These findings agree well with the presence of an oxygen-deficient shell on the material's surface evidenced by FT-IR and XPS measurements. Likewise, the incorporation of the CuO enhances the photocurrent obtained at 1.23 V from 0.55 to 0.8 mA·cm(-2) because of an improved nanostructure. Optimized films demonstrate an incident photon-to-current efficiency (IPCE) of 52% at 380 nm when applying 1.23 V versus RHE, and a faradaic efficiency for water splitting close to unity.