Effect of abiotic and biotic factors on Brettanomyces bruxellensis bioadhesion properties.

Biofilms are central to microbial life because of the advantage that this mode of life provides, whereas the planktonic form is considered to be transient in the environment. During the winemaking process, grape must and wines host a wide diversity of microorganisms able to grow in biofilm. This is the case of Brettanomyces bruxellensis considered the most harmful spoilage yeast, due to its negative sensory effect on wine and its ability to colonise stressful environments. In this study, the effect of different biotic and abiotic factors on the bioadhesion and biofilm formation capacities of B. bruxellensis was analyzed. Ethanol concentration and pH had negligible effect on yeast surface properties, pseudohyphal cell formation or bioadhesion, while the strain and genetic group factors strongly modulated the phenotypes studied. From a biotic point of view, the presence of two different strains of B. bruxellensis did not lead to a synergistic effect. A competition between the strains was rather observed during biofilm formation which seemed to be driven by the strain with the highest bioadhesion capacity. Finally, the presence of wine bacteria reduced the bioadhesion of B. bruxellensis. Due to biofilm formation, O. oeni cells were observed attached to B. bruxellensis as well as extracellular matrix on the surface of the cells.

High intraspecific variation of the cell surface physico-chemical and bioadhesion properties in Brettanomyces bruxellensis.

Brettanomyces bruxellensis is the most damaging spoilage yeast in the wine industry because of its negative impact on the wine organoleptic qualities. The strain persistence in cellars over several years associated with recurrent wine contamination suggest specific properties to persist and survive in the environment through bioadhesion phenomena. In this work, the physico-chemical surface properties, morphology and ability to adhere to stainless steel were studied both on synthetic medium and on wine. More than 50 strains representative of the genetic diversity of the species were considered. Microscopy techniques made it possible to highlight a high morphological diversity of the cells with the presence of pseudohyphae forms for some genetic groups. Analysis of the physico-chemical properties of the cell surface reveals contrasting behaviors: most of the strains display a negative surface charge and hydrophilic behavior while the Beer 1 genetic group has a hydrophobic behavior. All strains showed bioadhesion abilities on stainless steel after only 3 h with differences in the concentration of bioadhered cells ranging from 2.2 × 102 cell/cm2 to 7.6 × 106 cell/cm2. Finally, our results show high variability of the bioadhesion properties, the first step in the biofilm formation, according to the genetic group with the most marked bioadhesion capacity for the beer group.

Deep impact of the inactivation of the SecA2-only protein export pathway on the proteosurfaceome of Listeria monocytogenes.

Listeria monocytogenes presents a dimorphism associated to the SecA2 activity with cells having a normal rod shape or a dysmorphic elongated filamentous form. Besides variation of the cell and colony morphotype, this cell differentiation has profound ecophysiological and physiopathological implications with collateral effects on virulence and pathogenicity, biotope colonisation, bacterial adhesion and biofilm formation. This suggests the SecA2-only protein export could influence the listerial cell surface, which was investigated first by characterising its properties in L. monocytogenes wt and ΔsecA2. The degree of hydrophilicity and Lewis acid-base properties appeared significantly affected upon SecA2 inactivation. As modification of electrostatic properties would owe to modification in the composition of cell-surface proteins, the proteosurfaceome was further investigated by shotgun label-free proteomic analysis with a comparative relative quantitative approach. Following secretomic analysis, the protein secretion routes of the identified proteins were mapped considering the cognate transport and post-translocational maturation systems, as well as protein categories and subcellular localisation. Differential protein abundance profiles coupled to network analysis revealed the SecA2 dependence of 48 proteins, including some related to cell envelope biogenesis, translation and protein export, which could account for modifications of adhesion and surface properties of L. monocytogenes upon SecA2 inactivation. This investigation unravelled the profound influence of SecA2 activity on the cell surface properties and proteosurfaceome of L. monocytogenes, which provides advanced insights about its ecophysiopathology. SIGNIFICANCE: L. monocytogenes is a foodborne zoonotic pathogen and etiological agent of human listeriosis. This species presents a cellular dimorphism associated to the SecA2 activity that has profound physiopathological and ecophysiological implications with collateral effects on bacterial virulence and colonisation. To explore the influence of the SecA2-only protein export on the listerial cell, the surface properties of L. monocytogenes expressing or depleted of SecA2 was characterised by microelectrophoresis, microbial affinity to solvents and contact angles analyses. As modifications of hydrophilicity and Lewis acid-base electrostatic properties would owe to modification in the composition of cell-surface proteins, the proteinaceous subset of the surfaceome, i.e. the proteosurfaceome, was investigated further by shotgun label-free proteomic analysis. This subproteome appeared quite impacted upon SecA2 inactivation with the identification of proteins accounting for modifications in the cell surface properties. The profound influence of SecA2 activity on the cell surface of L. monocytogenes was unravelled, which provides advanced insights about its ecophysiopathology.

Robust Grafting of Polyionenes: New Potent and Versatile Antimicrobial Surfaces.

Polyionenes (PI) with stable positive charges and tunable hydrophobic spacers in the polymer backbone, are shown to be particularly efficient regarding antimicrobial properties. This effect can be modulated since it increases with the length of hydrophobic spacers, i.e., the number of methylene groups between quaternary ammoniums. Now, to further explore these properties and provide efficient antimicrobial surfaces, polyionenes should be grafted onto materials. Here a robust grafting strategy to covalently attach polyionenes is described. The method consisted in a sequential surface chemistry procedure combining polydopamine coating, diazonium-induced polymerization, and polyaddition. To the best of knowledge, grafting of PI onto surfaces is not reported earlier. All chemical steps are characterized in detail via various surface analysis techniques (FTIR, X-ray photoelectron spectroscopy, contact angle, and surface energy measurements). The antibacterial properties of polyionene-grafted surfaces are then studied through bacterial adhesion experiments consisting in enumeration of adherent bacteria (total and viable cultivable cells). PI-grafted surfaces are showed to display effective and versatile bacteriostatic/bactericidal properties associated with a proadhesive effect.

European survey and evaluation of sampling methods recommended by the standard EN ISO 18593 for the detection of Listeria monocytogenes and Pseudomonas fluorescens on industrial surfaces.

The ready-to-eat products can be contaminated during processing by pathogen or spoilage bacteria, which persist in the industrial environment. Some bacterial species are able to form biofilms which protect them from environmental conditions. To check the bacterial contamination of the surfaces in the food industries, the professionals must regularly use surface sampling methods to detect the pathogen such as Listeria monocytogenes or the spoilage such as Pseudomonas fluorescens. In 2010, we designed and carried out a European survey to collect surface sampling information to detect or enumerate L. monocytogenes in food processing plants. A total of 137 questionnaires from 14 European Union Member States were returned. The outcome of this survey showed that the professionals preferred friction sampling methods with gauze pad, swab and sponges versus contact sampling methods. After this survey, we compared the effectiveness of these three friction sampling methods and the contact plates, as recommended in the standard EN ISO 18593 that was revised in 2018, on the recovery of L. monocytogenes and of P. fluorescens in mono-specie biofilms. This study showed no significant difference between the effectiveness of the four sampling methods to detach the viable and culturable bacterial population of theses mono-specie biofilms.

Proteomic Response of Pseudomonas aeruginosa PAO1 Adhering to Solid Surfaces.

Pseudomonas aeruginosa is a pathogenic micro-organism responsible for many hospital-acquired infections. It is able to adhere to solid surfaces and develop an immobilized community or so-called biofilm. Many studies have been focusing on the use of specific materials to prevent the formation of these biofilms, but the reactivity of the bacteria in contact to surfaces remains unknown. The aim of this study was to evaluate the impact of the abiotic surface on the physiology of adherent bacteria. Three different materials, stainless steel (SS), glass (G), and polystyrene (PS) that were relevant to industrial or medical environments were characterized at the physicochemical level in terms of their hydrophobicity and roughness. We showed that SS was moderately hydrophilic and rough, potentially containing crevices, G was hydrophilic and smooth while PS was hydrophobic and smooth. We further showed that P. aeruginosa cells were more likely able to adhere to SS and G rather than PS surfaces under our experimental conditions. The physiological response of P. aeruginosa when adhering to each of these materials was then evaluated by global proteomic analysis. The abundance of 70 proteins was shown to differ between the materials suggesting that their abundance was modified as a function of the material to which bacteria adhered. Our data lead to enabling the identification of abundance patterns that appeared to be specific to a given surface. Taken together, our data showed that P. aeruginosa is capable of sensing and responding to a surface probably via specific programmes to adapt its physiological response accordingly.

The design of superhydrophobic stainless steel surfaces by controlling nanostructures: A key parameter to reduce the implantation of pathogenic bacteria.

Reducing bacterial adhesion on substrates is fundamental for various industries. In this work, new superhydrophobic surfaces are created by electrodeposition of hydrophobic polymers (PEDOT-F4 or PEDOT-H8) on stainless steel with controlled topographical features, especially at a nano-scale. Results show that anti-bioadhesive and anti-biofilm properties require the control of the surface topographical features, and should be associated with a low adhesion of water onto the surface (Cassie-Baxter state) with limited crevice features at the scale of bacterial cells (nano-scale structures).

Flagella but not type IV pili are involved in the initial adhesion of Pseudomonas aeruginosa PAO1 to hydrophobic or superhydrophobic surfaces.

Over the last decades, surface biocontamination has become a major concern in food industries and medical environments where its outcomes could vary from financial losses to public health issues. Understanding adhesion mechanisms of involved microorganisms is essential to develop new strategies of prevention and control. Adhesion of Pseudomonas aeruginosa, a nosocomial pathogenic bacterium, relies on several bacterial features, among which are bacterial appendages such as flagella and type IV pili. Here, we examine the role of P. aeruginosa PAO1 flagella and type IV pili in the adhesion to abiotic surfaces with various hydrophobicities. Adhesion kinetics showed, that after 60min, flagella increased the adhesion of the strain to surfaces with high hydrophobicity while no effect was observed on hydrophilic surfaces. Flagella of adherent bacteria exhibited specific and conserved pattern on the surfaces that suggested a higher affinity of flagella for hydrophobic surfaces. Based on these results and on previous studies in the literature, we proposed a model of flagella-mediated adhesion onto hydrophobic surfaces where these appendages induce the first contact and promote the adhesion of the bacterial body. These findings suggest that anti-bioadhesive surface design should take into consideration the presence of bacterial appendages.

Exploring the diversity of Listeria monocytogenes biofilm architecture by high-throughput confocal laser scanning microscopy and the predominance of the honeycomb-like morphotype.

Listeria monocytogenes is involved in food-borne illness with a high mortality rate. The persistence of the pathogen along the food chain can be associated with its ability to form biofilms on inert surfaces. While most of the phenotypes associated with biofilms are related to their spatial organization, most published data comparing biofilm formation by L. monocytogenes isolates are based on the quantitative crystal violet assay, which does not give access to structural information. Using a high-throughput confocal-imaging approach, the aim of this work was to decipher the structural diversity of biofilms formed by 96 L. monocytogenes strains isolated from various environments. Prior to large-scale analysis, an experimental design was created to improve L. monocytogenes biofilm formation in microscopic-grade microplates, with special emphasis on the growth medium composition. Microscopic analysis of biofilms formed under the selected conditions by the 96 isolates revealed only weak correlation between the genetic lineages of the isolates and the structural properties of the biofilms. However, a gradient in their geometric descriptors (biovolume, mean thickness, and roughness), ranging from flat multilayers to complex honeycomb-like structures, was shown. The dominant honeycomb-like morphotype was characterized by hollow voids hosting free-swimming cells and localized pockets containing mixtures of dead cells and extracellular DNA (eDNA).

Quantification of viable Brochothrix thermosphacta in cooked shrimp and salmon by real-time PCR.

Brochothrix thermosphacta, a Gram-positive bacterium, is considered as the predominant spoilage microbiota of modified atmosphere packing (MAP) shrimp and fish. Traditional methods currently used to detect B. thermosphacta in foods are time-consuming and labour-intensive. The aim of this study was to develop a real-time PCR quantification method combined with a propidium monoazide (PMA) sample treatment step to monitor the population of B. thermosphacta in cooked shrimp and salmon. The specificity of the two primers MO405 and MO404 used to amplify a 70 bp fragment of the 16S rRNA gene was demonstrated by using purified DNA from 30 strains, among 21 bacterial species including 22 reference strains. Using these primers for real-time PCR and in pure culture, a good correlation was obtained between real-time PCR and the conventional plating method. Quantification was linear over 7-log units using artificially inoculated samples. The method performed successfully when tested on naturally contaminated cooked shrimp and fresh salmon, with a minimum threshold of 1.9×10² CFU/g for accurate quantification of B. thermosphacta. The correlation between the B. thermosphacta counts obtained by real-time PCR and plate counts on naturally contaminated shrimp and salmon was high (R²=0.895). Thus, this study presents a rapid tool for producing reliable quantitative data on B. thermosphacta in cooked shrimp and fresh salmon.

Intraspecies diversity of Lactobacillus sakei response to oxidative stress and variability of strain performance in mixed strains challenges.

Lactobacillus sakei is a meat-borne lactic acid bacterium species exhibiting a wide genomic diversity. We have investigated the diversity of response to various oxidative compounds, between L. sakei strains, among a collection representing the genomic diversity. We observed various responses to the different compounds as well as a diversity of response depending on the aeration conditions used for cell growth. A principal component analysis revealed two main phenotypic groups, partially correlating with previously described genomic clusters. We designed strains mixes composed of three different strains, in order to examine the behavior of each strain, when cultured alone or in the presence of other strains. The strains composing the mixtures were chosen as diverse as possible, i.e. exhibiting diverse responses to oxidative stress and belonging to different genomic clusters. Growth and survival rates of each strain were monitored under various aeration conditions, with or without heme supplementation. The results obtained suggest that some strains may act as "helper" or "burden" strains depending on the oxidative conditions encountered during incubation. This study confirms that resistance to oxidative stress is extremely variable within the L. sakei species and that this property should be considered when investigating starter performance in the complex meat bacterial ecosystems.

Evidence of autoinduction heterogeneity via expression of the Agr system of Listeria monocytogenes at the single-cell level.

To investigate if the primary function of the Agr system of Listeria monocytogenes is to monitor cell density, we followed Agr expression in batch cultures, in which the autoinducer concentration was uniform, and in biofilms. Expression was heterogeneous, suggesting that the primary function of Agr is not to monitor population density.

Quantitative detection of Listeria monocytogenes in biofilms by real-time PCR.

A quantitative method based on a real-time PCR assay to enumerate Listeria monocytogenes in biofilms was developed. The specificity for L. monocytogenes of primers targeting the listeriolysin gene was demonstrated using a SYBR Green I real-time PCR assay. The number of L. monocytogenes detected growing in biofilms was 6 x 10(2) CFU/cm2.