The critical role of wavelength in the UV-activated grafting of 1-alkene onto silicon and silicon nitride SixN4 surfaces.

The wavelength used during photochemical grafting of alkene onto silicon related surfaces influences molecular surface coverage. Ultraviolet light leads to apparent highly dense layers on UV absorbing materials due to the side reaction between alkenes resulting in strongly physisorbed dimers whereas higher wavelengths lead to dense and well-controlled layers.

[Successful phacoemulsification in vitrectomized eyes: technical considerations]. / Comment réussir sa phaco-émulsification sur œil vitrectomisé ? Particularités techniques.

Cataract surgery after pars plana vitrectomy significantly improves visual acuity in 85% of cases, limited by retinal comorbidity and surgical complications. However, despite recent advances, this surgery remains a special challenge. Indeed, the surgeon must be aware of its many pitfalls and often adapt his surgical technique to avoid the 10% rate of intraoperative complications reported in the literature - ten times higher than for the non-vitrectomized eye. During the postoperative period, the most common complication is posterior capsule opacification, which may require early laser capsulotomy.

Bioprinting by laser-induced forward transfer for tissue engineering applications: jet formation modeling.

In this paper, a nanosecond LIFT process is analyzed both from experimental and modeling points of view. Experimental results are first presented and compared to simple estimates obtained from physical analysis, i.e. energy balance, jump relations and analytical pocket dynamics. Then a self-consistent 2D axisymmetric modeling strategy is presented. It is shown that data accessible from experiments, i.e. jet diameter and velocity, can be reproduced. Moreover, some specific mechanisms involved in the rear-surface deformation and jet formation may be described by some scales of hydrodynamic process, i.e. shock waves propagation and expansion waves, as a consequence of the laser heating. It shows that the LIFT process is essentially driven by hydrodynamics and thermal transfer, and that a coupled approach including self-consistent laser energy deposition, heating by thermal conduction and specific models for matter is required.

Impact of RGD micro-patterns on cell adhesion.

In order to avoid the problems related to biomaterial use (inflammation, infections, aseptic loosening, etc.), a new approach consisting of associating the material and autologous cells before implantation is being developed, thus requiring a perfect cooperation between the material's surface and the cell. To improve cell adhesion to biomaterials, a suitable method is to functionalize their surface by pro-adhesive ligand grafting. The aim of this study was to covalently graft RGD containing peptides onto a poly-(ethylene terephthalate) surface in well-defined microstructures in order to control MC3T3 cell adhesion. We followed two different routes for obtaining micro-patterned materials: (1) a photoablation technique using an excimer laser and (2) a photolithography process. The resulting patterns were characterized by optical microscopy, scanning electron microscopy, optical profilometry and high resolution mu-imager. The biological evaluation of cell adhesion onto the micro-patterned surfaces was carried out using optical microscopy, scanning electron microscopy and fluorescence microscopy. Cells seeded onto photolithographical or photoablated micro-patterned PET exhibited an alignment with the RGD domains and appear to be connecting through pseudopods extending towards each other. Whatever the technique used to create micro-patterns, a cell alignment occurs once the thickness of the RGD line reaches approximately 100 microm. These results prove the importance of microstructured surfaces for the elaboration of tissue engineered biomaterials.

Picosecond acoustics in vegetal cells: non-invasive in vitro measurements at a sub-cell scale.

A 100 fs laser pulse passes through a single transparent cell and is absorbed at the surface of a metallic substrate. Picosecond acoustic waves are generated and propagate through the cell in contact with the metal. Interaction of the high frequency acoustic pulse with a probe laser light gives rise to Brillouin oscillations. The measurements are thus made with lasers for both the opto-acoustic generation and the acousto-optic detection, and acoustic frequencies as high as 11 GHz can be detected, as reported in this paper. The technique offers perspectives for single cell imaging. The in-plane resolution is limited by the pump and probe spot sizes, i.e. approximately 1 microm, and the in-depth resolution is provided by the acoustic frequencies, typically in the GHz range. The effect of the technique on cell safety is discussed. Experiments achieved in vegetal cells illustrate the reproducibility and sensitivity of the measurements. The acoustic responses of cell organelles are significantly different. The results support the potentialities of the hypersonic non-invasive technique in the fields of bio-engineering and medicine.

High-throughput laser printing of cells and biomaterials for tissue engineering.

In parallel with ink-jet printing and bioplotting, biological laser printing (BioLP) using laser-induced forward transfer has emerged as an alternative method in the assembly and micropatterning of biomaterials and cells. This paper presents results of high-throughput laser printing of a biopolymer (sodium alginate), biomaterials (nano-sized hydroxyapatite (HA) synthesized by wet precipitation) and human endothelial cells (EA.hy926), thus demonstrating the interest in this technique for three-dimensional tissue construction. A rapid prototyping workstation equipped with an IR pulsed laser (tau=30 ns, lambda=1064 nm, f=1-100 kHz), galvanometric mirrors (scanning speed up to 2000 mm s(-1)) and micrometric translation stages (x, y, z) was set up. The droplet generation process was controlled by monitoring laser fluence, focalization conditions and writing speed, to take into account its mechanism, which is driven mainly by bubble dynamics. Droplets 70 microm in diameter and containing around five to seven living cells per droplet were obtained, thereby minimizing the dead volume of the hydrogel that surrounds the cells. In addition to cell transfer, the potential of using high-throughput BioLP for creating well-defined nano-sized HA patterns is demonstrated. Finally, bioprinting efficiency criteria (speed, volume, resolution, integrability) for the purpose of tissue engineering are discussed.

Licensing regulators Geminin and Cdt1 identify progenitor cells of the mouse CNS in a specific phase of the cell cycle.

Nervous system formation integrates control of cellular proliferation and differentiation and is mediated by multipotent neural progenitor cells that become progressively restricted in their developmental potential before they give rise to differentiated neurons and glial cells. Evidence from different experimental systems suggests that Geminin is a candidate molecule linking proliferation and differentiation during nervous system development. We show here that Geminin and its binding partner Cdt1 are expressed abundantly by neural progenitor cells during early mouse neurogenesis. Their expression levels decline at late developmental stages and become undetectable upon differentiation. Geminin and Cdt1 expressing cells also express Sox2 while no overlap is detected with cells expressing markers of a differentiated neuronal phenotype. A fraction of radial glial cells expressing RC2 and Pax6 are also immunoreactive for Geminin and Cdt1. The majority of the Geminin and Cdt1 expressing cell populations appears to be distinct from fate-restricted precursor cells expressing Mash1 or Neurogenin2. Bromo-deoxy-uridine (BrdU) incorporation experiments reveal a cell cycle specific expression in neural progenitor cells, with Geminin being present from S to M phase, while Cdt1 expression characterizes progenitor cells in G1 phase. Furthermore, in vitro differentiation of adult neurosphere cultures shows downregulation of Geminin/Cdt1 in the differentiated state, in line with our data showing that Geminin is present in neural progenitor cells of the CNS during mouse embryogenesis and adulthood and becomes downregulated upon cell fate specification and differentiation. This suggests a role for Geminin in the formation and maintenance of the neural progenitor cells.

[p27Kip1 independently promotes neuronal differentiation and migration in the cerebral cortex]. / p27Kip1 independently promotes neuronal differentiation and migration in the cerebral cortex.

The generation of glutamatergic neurons by stem and progenitor cells is a complex process involving the tight coordination of multiple cellular activities, including cell cycle exit, initiation of neuronal differentiation and cell migration. The mechanisms that integrate these different events into a coherent program are not well understood. Here we show that the cyclin-dependent kinase inhibitor p27Kip1 plays an important role in neurogenesis in the mouse cerebral cortex, by promoting the differentiation and radial migration of cortical projection neurons. Importantly, p27Kip1 promotes neuronal differentiation and neuronal migration via two distinct mechanisms, which are themselves independent of the cell cycle regulatory function of p27Kip1. p27Kip1 inactivation by gene targeting or RNA interference results in neuronal differentiation and radial migration defects, demonstrating that p27Kip1 regulates cell migration in vivo. The differentiation defect, but not the migration defect, is rescued by overexpression of the proneural gene Neurogenin 2. p27Kip1 acts by stabilizing Neurogenin 2 protein, an activity carried by the N-terminal half of the protein. The migration defect resulting from p27Kp1 inactivation is rescued by blocking RhoA signalling, an activity that resides in the c-terminal half of p27Kip1. Thus, p27Kip1 plays a key role in cortical development, acting as a modular protein that independently regulates and couples multiple cellular pathways contributing to neurogenesis.

SPINE bioinformatics and data-management aspects of high-throughput structural biology.

SPINE (Structural Proteomics In Europe) was established in 2002 as an integrated research project to develop new methods and technologies for high-throughput structural biology. Development areas were broken down into workpackages and this article gives an overview of ongoing activity in the bioinformatics workpackage. Developments cover target selection, target registration, wet and dry laboratory data management and structure annotation as they pertain to high-throughput studies. Some individual projects and developments are discussed in detail, while those that are covered elsewhere in this issue are treated more briefly. In particular, this overview focuses on the infrastructure of the software that allows the experimentalist to move projects through different areas that are crucial to high-throughput studies, leading to the collation of large data sets which are managed and eventually archived and/or deposited.

Development of the mesencephalic dopaminergic neuron system is compromised in the absence of neurogenin 2.

Neurogenin 2 (Ngn2) is a proneural gene involved in neuronal differentiation and subtype specification in various regions of the nervous system. In the ventral midbrain, Ngn2 is expressed in a spatiotemporal pattern that correlates with the generation of mesencephalic dopaminergic (mesDA) neurons. We show here that lack of Ngn2 impairs the development of mesDA neurons, such that less than half of the normal mesDA neuron number remain in Ngn2 mutant mice at postnatal stages. Analysis of Ngn2 mutant mice during mesDA neurogenesis show that medially located precursors are formed but are arrested in their differentiation at a stage when they have not yet acquired the characteristics of mesDA neuron precursors. Loss of Ngn2 function appears to specifically affect the generation of DA neurons, as the development of other types of neurons within the ventral midbrain is unaltered. Ngn2 is the first example of a gene expressed in progenitors in the ventricular zone of the mesDA neuron domain that is essential for proper mesDA neuron differentiation, and whose loss of function causes impaired mesDA neurogenesis without other major abnormalities in the ventral midbrain.

Grafting RGD containing peptides onto hydroxyapatite to promote osteoblastic cells adhesion.

Ceramics possess osteoconductive properties but exhibit no intrinsic osteoinductive capacity. Consequently, they are unable to induce new bone formation in extra osseous sites. In order to develop bone substitutes with osteogenic properties, one promising approach consists of creating hybrid materials by associating in vitro biomaterials with osteoprogenitor cells. With this aim, we have developed a novel strategy of biomimetic modification to enhance osseointegration of hydroxyapatite (HA) implants. RGD-containing peptides displaying different conformations (linear GRGDSPC and cyclo-DfKRG) were grafted onto HA surface by means of a three-step reaction procedure: silanisation with APTES, cross-linking with N-succinimidyl-3-maleimidopropionate and finally immobilisation of peptides thanks to thiol bonding. Whole process was performed in anhydrous conditions to ensure the reproducibility of the chemical functionalisation. The three-step reaction procedure was characterised by high resolution X-ray photoelectron spectroscopy. Efficiency of this biomimetic modification was finally demonstrated by measuring the adhesion of osteoprogenitor cells isolated from HBMSC onto HA surface.

Cyclo-(DfKRG) peptide grafting onto Ti-6Al-4V: physical characterization and interest towards human osteoprogenitor cells adhesion.

In the present paper, specific interest has been devoted to the design of new hybrid materials associating Ti-6Al-4V alloy and osteoprogenitor cells through the grafting of two RGD containing peptides displaying a different conformation (linear RGD and cyclo-DfKRG) onto titanium surface. Biomimetic modification was performed by means of a three-step reaction procedure: silanization with APTES, cross-linking with SMP and finally immobilization of peptides thanks to thiol bonding. The whole process was performed in anhydrous conditions to ensure homogeneous biomolecules layout as well as to guarantee a sufficient amount of biomolecules grafted onto surfaces. The efficiency of this new route for biomimetic modification of titanium surface was demonstrated by measuring the adhesion between 1 and 24 h of osteoprogenitor cells isolated from HBMSC. Benefits of the as-proposed method were related to the high concentration of peptides grafted onto the surface (around 20 pmol/mm(2)) as well as to the capacity of cyclo-DfKRG peptide to interact with integrin receptors. Moreover, High Resolution beta-imager (using [(35)S]-Cys) has exhibited the stability of peptides grafted onto the surface when treated in harsh conditions.

Prospective, randomized, parallel-group trial to evaluate the effects of lactulose and polyethylene glycol-4000 on colonic flora in chronic idiopathic constipation.

BACKGROUND: Although lactulose and polyethylene glycol are osmotic laxatives widely used in the treatment of chronic constipation, no study has been conducted to compare their actions on the colonic bacterial ecosystem, which has an important influence on host health. AIM: To assess the effects of lactulose and polyethylene glycol on the composition and metabolic indices of the faecal flora in patients with chronic idiopathic constipation. METHODS: Sixty-five patients with chronic idiopathic constipation were included in this controlled, multi-centre, randomized, parallel-group study. Participants received lactulose (Duphalac) or polyethylene glycol-4000 (Forlax) powders for the first week at a fixed dosage at night (20 g/day); in the second week, patients were given the option to vary the dose according to efficacy and tolerance (10-30 g/day); for the last 2 weeks, treatment was administered at a fixed dosage based on the results of the second week (10-30 g/day). Stools were recovered for bacteriological analysis at days -1, 21 and 28. RESULTS: Clinical efficacy and tolerance were similar with both treatments. In the lactulose group, an increase in faecal bifidobacteria counts (P = 0.04) and beta-galactosidase activity (P < 0.001) was observed from day -1 to day 28, whereas, in the polyethylene glycol group, there was a decrease in total short-chain fatty acids (P = 0.02), butyrate (P = 0.04), acetate (P = 0.02) and faecal bacterial mass (P = 0.001). No differences were observed in stools with regard to the following parameters: counts of Lactobacillus, clostridial spores, Bacteroides and enterobacteria, pH, biliary acids and neutral sterol concentrations. CONCLUSIONS: Both lactulose and polyethylene glycol are efficacious and well tolerated. However, although lactulose can be considered as a pre-biotic in constipated patients, polyethylene glycol produces signs of decreased colonic fermentation in the stool.

Design of new titanium alloys for orthopaedic applications.

Parallel to the biofunctionalisation of existing materials, innovation in biomaterials engineering has led to the specific design of titanium alloys for medical applications. Studies of the biological behaviour of metallic elements have shown that the composition and structure of the material should be carefully tailored to minimise adverse body reactions and to enhance implant longevity, respectively. Consequently, interest has focused on a new family of titanium alloys: Ti-6Mo-3Fe-5Ta, Ti-4Mo-2Fe-5Ta and Ti-6Mo-3Fe-5Zr-5Hf alloys. The non-toxicity of the specially designed titanium alloys compared with osteoblastic cells has been ascertained using MTT and RN tests. In addition, phase transformations upon thermal processing have been investigated, with comparison with a well-defined beta titanium alloy. Optimum thermal processing windows (above 550 degrees C) have been designed to generate a stable and nanostructured alpha phase from the isothermal omega phase that precipitates in a low temperature range (150-350 degrees C). The generation of such nanostructured microstructures should provide a promising opportunity to investigate tissue-biomaterial interactions at the scale of biomolecules such as proteins.

Ti4+ to Ti3+ conversion of TiO2 uppermost layer by low-temperature vacuum annealing: interest for titanium biomedical applications.

Because of the Ti(3+) defects responsibility for dissociative adsorption of water onto TiO(2) surfaces and due to the hydroxyls influence on the biological behavior of titanium, controlling the Ti(3+) surface defects density by means of low-temperature vacuum annealing is proposed to improve the bone/implant interactions. Experiments have been carried out on Ti-6Al-4V alloys exhibiting a porous surface generated primarily by chemical treatment. XPS investigations have shown that low-temperature vacuum annealing can create a controlled number of Ti(3+) defects (up to 21% Ti(3+)/Ti(4+) at 573 K). High Ti(3+) defect concentration is linked to surface porosity. Such surfaces, exhibiting high hydrophilicity and microporosity, would confer to titanium biomaterials a great ability to interact with surrounding proteins and cells and hence would favor the bone anchorage of as-treated implants.

The transcription factor neurogenin 2 restricts cell migration from the cortex to the striatum.

The dorsal and ventral domains of the telencephalon are delineated by a unique boundary structure that restricts the migration of dorsal and ventral cells to a different extent. While many cells invade the dorsal cortex from the ventral ganglionic eminence (GE), hardly any cortical cells cross the boundary into the GE. Several molecules have been implicated in the regulation of ventral to dorsal cell migration, but so far nothing is known about the molecular mechanisms restricting cortical cell migration in vivo. Here we show that in the absence of the transcription factor neurogenin 2, cells from the cortex migrate into the GE in vitro and in vivo as detected in transgenic mice containing a lacZ gene in the neurogenin 2 locus. In contrast, the migration of cells from the GE is not affected. Molecular and cellular analysis of the cortico-striatal boundary revealed that neurogenin 2 regulates the fasciculation of the cortico-striatal boundary which may explain the non cell-autonomous nature of the migration defect as detected by in vitro transplantation. Taken together, these results show that distinct cues located in the cortico-striatal boundary restrict cells in the dorsal and ventral telencephalon.

Crossregulation between Neurogenin2 and pathways specifying neuronal identity in the spinal cord.

We have examined how genetic pathways that specify neuronal identity and regulate neurogenesis interface in the vertebrate neural tube. Here, we demonstrate that expression of the proneural gene Neurogenin2 (Ngn2) in the ventral spinal cord results from the modular activity of three enhancers active in distinct progenitor domains, suggesting that Ngn2 expression is controlled by dorsoventral patterning signals. Consistent with this hypothesis, Ngn2 enhancer activity is dependent on the function of Pax6, a homeodomain factor involved in specifying the identity of ventral spinal cord progenitors. Moreover, we show that Ngn2 is required for the correct expression of Pax6 and several homeodomain proteins expressed in defined neuronal populations. Thus, neuronal differentiation involves crossregulatory interactions between a bHLH-driven program of neurogenesis and genetic pathways specifying progenitor and neuronal identity in the spinal cord.

Human medulloblastoma cell line DEV is a potent tool to screen for factors influencing differentiation of neural stem cells.

The aim of our study was to investigate whether a human neural cell line could be used as a reliable screening tool to examine the functional conservation, in humans, of transcription factors involved in neuronal or glial specification in other species. Gain-of-function experiments were performed on DEV cells, a cell line derived from a human medulloblastoma. Genes encoding nine different transcription factors were tested for their influence on the process of specification of human DEV cells towards a neuronal or glial fate. In a first series of experiments, DEV cells were transfected with murine genes encoding transcription factors known to be involved in the neuronal differentiation cascade. Neurogenins-1, -2, and -3; Mash-1; and NeuroD increased the differentiation of DEV cells towards a neuronal phenotype by a factor of 2-3.5. In a second series of experiments, we tested transcription factors involved in invertebrate glial specification. In the embryonic Drosophila CNS, the development of most glial cells depends on the master regulatory gene glial cell missing (gcm). Expression of gcm in DEV cells induced a twofold increase of astrocytic and a sixfold increase of oligodendroglial cell types. Interestingly, expression of tramtrack69, which is required in all Drosophila glial cells, resulted in a fourfold increase of only the oligodendrocyte phenotype. Expression of the related tramtrack88 protein, which is not expressed in the fly glia, or the C. elegans lin26 protein showed no effect. These results show that the Drosophila transcription factor genes tested can conserve their function upon transfection into the human DEV cells, qualifying this cell line as a screening tool to analyze the mechanisms of neuronal and glial specification.