Remarkable enhancement in radio-cesium uptake from acidic feeds into an extraction chromatography resin containing a calix[4]arene-mono-crown-6 ligand.

An extraction chromatography resin, prepared by the impregnation of bis-octyloxy-calix[4]arene-mono-crown-6 (BOCMC)onto an acrylic ester based polymeric support material, gave excellent uptake data for the removal of radio-cesium (Cs-137) from nitric acid feed solutions. The weight distribution coefficient (Kd) value of >300 obtained during the present study at 3 M HNO3 was the highest reported so far while using a calix-crown-6 based extraction chromatographic resin material. Analogous resin reported previously has yielded a Kd value <100 at comparable feed conditions. The sorbed metal ions could be efficiently desorbed with de-ionized water. Kinetic modeling of the uptake data indicated that both the film and the intra-particle diffusion mechanism are simultaneously operating in the sorption of Cs+ion onto the BOCMC resin. The metal ion sorption data were fitted to the sorption isotherm models and did not conform to the chemisorptions of physisorption models and indicated a pi-pi interaction between the benzene rings of the calix-crown-6 ligand and the Cs+ ion. The reusability of the resins was quite satisfactory after 5 cycles and the radiation stability of the resin material was very good upto an absorbed dose of 500 kGy. The results of column studies were quite encouraging with 15 mL (9 bed volumes) as the breakthrough volume while the elution was complete in about 12 bed volumes of de-ionized water.

Multi-podant diglycolamides and room temperature ionic liquid impregnated resins: An excellent combination for extraction chromatography of actinides.

Extraction chromatography resins, prepared by impregnating two multi-podant diglycolamide ligands, viz. diglycolamide-functionalized calix[4]arene (C4DGA) and tripodal diglycolamide (T-DGA) dissolved in the room temperature ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide (RTIL: C4mimTf2N) on Chromosorb-W (an inert solid support), gave excellent results for the removal of trivalent actinides from acidic waste solutions. Distribution coefficient measurements on several metal ions showed selective sorption of Am(III) over hexavalent uranyl ions and other fission product elements such as strontium and cesium. The sorbed metal ions could be efficiently desorbed with a complexing solution containing guanidine carbonate and EDTA buffer. The sorption of Am(III) on both resins followed pseudo-second order rate kinetics with rate constants of 1.37×10(-6) and 6.88×10(-7)g/cpmmin for T-DGA and C4DGA resins, respectively. The metal sorption on both resins indicated the Langmuir monolayer chemisorption phenomenon with Eu(III) sorption capacities of 4.83±0.21 and 0.52±0.05mg per g of T-DGA and C4DGA resins, respectively. The results of column studies show that these resins are of interest for a possible application for the recovery of hazardous trivalent actinides from dilute aqueous solutions.

Composite polymeric beads containing N,N,N',N'-tetraoctyldiglycolamide for actinide ion uptake from nitric acid feeds: Batch uptake, kinetic modelling and column studies.

Polyethersulphone (PES) based composite polymeric beads (CPB) containing TODGA (N,N,N',N'-tetraoctyldiglycolamide) as the extractant were prepared by conventional phase inversion technique and were tested for the uptake of actinide ions such as Am(3+), UO2(2+), Pu(4+), Np(4+) and fission product ions such as Eu(3+) and Sr(2+). The CPBs containing 2.5-10wt.% TODGA were characterized by various physical methods and their porosity, size, surface morphology, surface area and the degradation profile by thermogravimetry were analyzed. The batch uptake studies involved kinetics of metal ion sorption, uptake as a function of nitric acid concentration, kinetic modelling and adsorption isotherms and most of the studies involved the Am(3+) ions. The batch saturation sorption capacities for Eu(3+) loading at 3M HNO3 were determined to be 6.6±0.02, 9.1±0.02 and 22.3±0.04mgg(-1) of CRBs with 2.5wt.%, 5wt.% and 10wt.% TODGA, respectively. The sorption isotherm analysis with Langmuir, D-R and Freundlisch isotherms indicated chemisorption monolayer mechanism. Chromatographic studies indicated breakthrough of Eu(3+) (using a solution containing Eu carrier) after about 0.75 bed volume (3.5-4mL). Elution of the loaded Eu was carried out using 0.01M EDTA as the eluent.

Polymeric beads containing Cyanex 923 for actinide uptake from nitric acid medium: Studies with uranium and plutonium.

Conventional phase inversion technique has been successfully applied for the preparation of the solid phase extractant (SPE), Cyanex 923 loaded polymer beads. Two types of polymer beads prepared by blending Polyetherether ketone with card (PEEKWC)/DMF with 5% Cyanex 923 (SPE-I, av bead size: 900µm) and 10% Cyanex 923(SPE-II, av. bead size: 1100µm) were evaluated for the uptake of actinide ions. The polymer beads were characterized by various physical methods such as thermal analysis, surface morphology analysis by SEM, EDAX techniques, etc. The polymer beads were used for the experiments involving the uptake of both U(VI) and Pu(IV) at tracer scale and U(VI) at milli molar concentrations from nitric acid feeds. The actinide ion uptake studies involved kinetics of metal ion sorption, adsorption isotherms, and column studies. The metal sorption capacities for U(VI) at 3M HNO3 were found to be 38.8±1.9mg and 54.5±1.7mg per g of SPE-I and SPE-II, respectively. The sorption isotherm analysis with Langmuir, D-R and Freundlisch isotherms indicated chemisorption monolayer mechanism. Column studies were also carried out using 4.5mL bed volume columns containing about 0.4 and 0.45g of SPE-I and SPE-II, respectively. The breakthrough profiles were obtained for U(VI) and the elution profiles were obtained using 1M Na2CO3 as the eluent.