Influence of permeability enhancers on the paracellular permeability of metformin hydrochloride and furosemide across Caco-2 cells.

Permeability enhancers can affect absorption of paracellularly transported drugs. This study aims to evaluate effects of permeability enhancers (chitosan, methyl-ß -cyclodextrin, sodium caprate, sodium lauryl sulfate, etc.) on the permeability of paracellularly absorbed furosemide and metformin hydrochloride. Methyl thiazole tetrazolium bromide test was carried out to determine the drug concentrations in permeability study. Trans-epithelial electrical resistance (TEER) values determined to assess the integrity of tight junctions. Permeability enhancers were applied at different concentrations alone, in dual/triple combinations. Permeability was determined using human colorectal adenocarcinoma (Caco-2) cells (TEER > 400 Ω·cm2). Permeability enhancers have no significant effect (<2-fold; p > 0.05) on the permeability of furosemide (1.80 × 10-5 ± 4.55 × 10-7 cm/s); however, metformin permeability (1.36 × 10-5 ± 1.25 × 10-6 cm/s) increased significantly (p < 0.05) with 0.3% and 0.5% (w/v) chitosan (2.0- and 2.7-fold, respectively), 1% methyl-ß -cyclodextrin (w/v) (3.5-fold), 10 and 20 µmol/L sodium caprate (2.2- and 2.8-fold, respectively), and 0.012% sodium lauryl sulfate (w/v) (1.9-fold). Furosemide permeability increased significantly (p < 0.05) with chitosan-sodium lauryl sulfate combination (1.7-fold), and all triple combinations (1.4- to 1.9-fold). Chitosan containing dual/triple combinations resulted in significant increase (p < 0.05) in metformin permeability (1.7 to 2.8-fold). All results indicated that absorption of furosemide and metformin can be improved by the combination of permeability enhancers. Therefore, it can be evaluated for the formulation of development strategies containing furosemide and metformin by the pharmaceutical industry.

The Organic Cation Transporter 2 Inhibitor Quinidine Modulates the Neuroprotective Effect of Nerve Growth Factor and Memantine on Cholinergic Neurons of the Basal Nucleus of Meynert in Organotypic Brain Slices.

INTRODUCTION: Alzheimer's disease (AD) is a severe neurodegenerative disorder of the brain characterized by degeneration of cholinergic neurons which is directly linked to cognitive decline. Nerve growth factor (NGF) is the most potent protective factor for cholinergic neurons, additionally the NMDA antagonist memantine blocks glutamate-mediated excitotoxic activity. Quinidine is an inhibitor of organic cation transporter 2 (OCT2). OCT2 is located on cholinergic neurons and plays a role in presynaptic reuptake and recycling of acetylcholine in the brain. We hypothesize that quinidine can modulate the protective effects of NGF and memantine on cholinergic neurons in organotypic brain slices of the nucleus basalis of Meynert (nBM). METHODS: Organotypic brain slices of nBM were incubated with 100 ng/mL NGF, 10 µM memantine, 10 µM quinidine, and combinations of these treatments for 2 weeks. Cholinergic neurons were immunohistochemically stained for choline acetyltransferase (ChAT). RESULTS: Our data show that NGF as well as memantine counteracted the cell death of cholinergic nBM neurons. Quinidine alone had no toxic effect on cholinergic neurons but inhibited the protective effect of NGF and memantine when applied simultaneously. DISCUSSION/CONCLUSION: Our data provide evidence that quinidine modulates the survival of cholinergic nBM neurons via OCT2.

Development and characterization of pullulan-based orally disintegrating films containing amlodipine besylate.

The aim of this study was to prepare pullulan-based orally disintegrating films (ODFs) containing amlodipine besylate, an anti-hypertensive drug, by the solvent casting method. For this purpose, nine different ODF formulations (F1-F9) were prepared by using different plasticizers (glycerol, sorbitol, propylene glycol) and different superdisintegrants (croscarmellose sodium, sodium starch glycolate, crospovidone). FD&C Green and aspartame were used as coloring agent and sweetener, respectively. According to the results of preformulation studies, the optimum ODF (F9) was determined and various characterization studies such as uniformity of mass, film thickness, surface pH of films, and mechanical properties (such as elongation at break, tensile strength, Young's modulus, and folding endurance), moisture content, disintegration time, uniformity of content and dissolution test, X-ray, DSC, SEM and short term stability analysis were performed on this formulation. Cytotoxicity and permeability studies for the F9 formulation were performed on the human epithelial colorectal adenocarcinoma (Caco-2) cell line. The formulation F9 had appropriate morphological and mechanical properties and disintegrated within 51.3 s according to the petri dish method, and 28.8 s according to the drop method. Dissolution studies revealed that 78.1 % of amlodipine besylate was dissolved in 20 min from F9 formulation. Cell culture studies showed that the formulation had no significant toxic effect on the Caco-2 cells. Also, there was no significant difference between the Caco-2 permeabilities of amlodipine besylate powder and amlodipine besylate ODFs. As a result of all these studies, we suggest to use the pullulan based amlodipine besylate ODFs to enhance ease of administration and patient compliance.

Assessment of Dose Proportionality of Rivaroxaban Nanocrystals.

Rivaroxaban (RXB) is a class II drug, according to the Biopharmaceutics Classification System. Since its bioavailability is low at high doses, dose proportionality is not achieved for pharmacokinetic parameters. However, when taken with food, its bioavailability increases at high doses. In this study, nanocrystal technology was used to increase the solubility and, hence, the bioavailability of RXB. Pluronic F127, pharmacoat 603, and PVP K-30 were used as stabilizers to prepare RXB nanosuspension, combining ball mill and high pressure homogenization methods. Particle sizes of RXB in nanosuspension (formulation A:348 nm; formulation B:403 nm) and nanocrystal formulations (formulation A:1167 nm; formulation B:606 nm) were significantly reduced (p < 0.05) compared to those of bulk RXB. In both formulations, 80% of the drug dissolved in 30 min. For dose proportionality evaluation, 3, 10, and 15 mg/kg of RXB nanosuspensions (formulation B) were administered to rabbits. The dose proportionality for AUC and Cmax of RXB nanocrystals was assessed by the power model, variance analysis of pharmacokinetic parameters, linear regression, and equivalence criterion methods. Dose proportionality for AUC was achieved at doses between 10-15 and 3-15 mg/kg. In conclusion, the preparation of a nanocrystal formulation of RXB improved its dissolution rate and pharmacokinetic profile.

Development and characterization of metformin hydrochloride- and glyburide-containing orally disintegrating tablets.

Diabetes is characterized by chronic hyperglycemia. Although metformin hydrochloride (MHCl)- and glyburide (GLB)-containing conventional tablets are available in the market and used to treat diabetes, orally disintegrating tablets (ODTs) containing the combination of these drugs are not commercially available. Therefore, the aim of this study was to prepare ODTs containing MHCl and GLB by direct-compression (DC-ODTs) and freeze-drying (FD-ODTs) methods. Physical properties of the powder mixture of DC-ODT formulation were determined (Angle of repose: 37.18 ± 1.27°; compressibility index: 20.31 ± 1.06%; Hausner ratio: 1.25 ± 0.03). Its moisture content was 0.3 ± 0.09%. The hardness values and the disintegration times for DC-ODTs and FD-ODTs were 221.60 ± 40.82 and 66.54 ± 2.68 N, and 80 and 30 s, respectively. Friability values were 0.24% for DC-ODTs and 0.38% for FD-ODTs. In uniformity-of-mass for single-dose-preparations test, the average weight was 684.38 ± 1.97 mg for DC-ODTs and 342.93 ± 2.4 mg for FD-ODTs, with less than 5% deviation for all 20 tablets. Water-absorption ratio for DC-ODTs was 1.30 ± 0.05. More than 90% of MHCl and GLB were dissolved within 5 min in both DC-ODTs and FD-ODTs. Although Caco-2 permeability of MHCl was influenced by the ODTs, GLB permeability was not. These results indicated that MHCl- and GLB-containing ODTs may be used as promising formulations for the treatment of diabetes.

Preparation and characterization of nimesulide containing nanocrystal formulations.

The aim of this study was to develop and characterize nanocrystal formulation containing nimesulide. Physical mixture of drug and excipient (nimesulide:pluronic F127, 1:0.5) was also prepared to compare the efficiency of formulations. The physicochemical characteristics of the formulations were determined by means of Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), and X-ray diffractometry. Particle size, saturation solubilities as a function of pH, and permeability across Caco-2 monolayers were determined for nimesulide in powder, physical mixture, and nanocrystal formulations. In FT-IR analysis, the characteristic peaks that belong to nimesulide were seen in all formulations. X-ray diffractograms displayed that crystalline structure of nimesulide was conserved in the nanocrystal formulation. The interaction between nimesulide and pluronic F127 was demonstrated by DSC analysis. In all conditions, the average particle size of the nanocrystal formulations decreased significantly (p < 0.05) as compared with nimesulide and physical mixture. The solubility of nimesulide in nanocrystal formulation was higher than those of nimesulide in powder and physical mixture. Permeability studies revealed that nimesulide is a highly permeable compound whether in powder form or in physical mixture and nanocrystal formulation. All these results clearly demonstrate that aqueous solubility of poorly water-soluble compounds can be improved by preparing nanocrystal formulations.

Design and characterization of nanocrystal formulations containing ezetimibe.

Ezetimibe is a lipid-lowering compound that selectively inhibits the absorption of cholesterol and related phytosterols from the intestine. As ezetimibe is almost insoluble in water, its bioavailability is too low to be detected. Thus, the objective of this study was to improve the solubility and dissolution rate of ezetimibe by preparing drug nanocrystals utilizing ball milling, high speed homogenization techniques. Pluronic F127 was chosen as a surface modifier to stabilize the nanocrystal formulations. Nanocrystal formulations of ezetimibe were prepared by using ball milling and high speed homogenization techniques. Additionally, the physicochemical characteristics of ezetimibe and nanocrystal formulations were determined by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), X-ray analysis and particle size analysis. Tablets were prepared containing ezetimibe nanocrystals formed by high speed homogenization (ultrasonic) and ball milling according to the results of particle size measurements and in vitro dissolution rates of the nanocrystal formulations. As a result of these experiments, it was found that the dissolution rate of the nanocrystal formulations increased and although tablet formulations which did not contain any solubilizing agent like sodium lauryl sulfate (SDS), the dissolution profile of these formulations were found similar to the commercial product.