Concentration Dependent Asymmetric Synergy in SDS-DDAO Mixed Surfactant Micelles.

We investigate the structure and interactions of a model anionic/amphoteric mixed surfactant micellar system, namely, sodium dodecyl sulfate (SDS) and N,N-dimethyldodecylamine N-oxide (DDAO), employing SANS, FTIR, DLS, and pH measurements, in the range 0.1-100 mM total surfactant concentration and 0-100% DDAO. Increasing surfactant concentration is found to elongate the prolate ellipsoid micelles (RPolar ∼ 25-40 Å), accompanied by up to a 6-fold increase in micellar charge. The surfactant synergy, in terms of micellar charge and size, diffusion coefficient, solution pH, and headgroup interactions, was found to vary with concentration. At lower concentrations (≤50 mM), the SDS-DDAO ratio of maximum synergy is found to be asymmetric (at 65-85% DDAO), which is rationalized using regular solution theory, suggesting an equilibrium between Na+ dissociation, DDAO protonation, and counterion concentration. At higher concentrations, maximum synergy shifts toward the equimolar ratio. Overall, our study expands and unifies previous reports, providing a comprehensive understanding for this model, synergetic mixed micellar system.

High unimer concentration and asymmetric bilayer observed in small unilamellar vesicles of mixed surfactants TDMAO/LiPFO.

The mixed surfactant system of tetradecyldimethylamine oxide (TDMAO) and lithium perfluorooctanoate (LiPFO) is known to spontaneously self-assemble into well-defined small unilamellar vesicles. For a quantitative analysis of small-angle x-ray scattering on this model system, we complemented the measurements with densitometry, conductimetry, and contrast-variation small-angle neutron scattering. The analysis points to two main findings: first, the vesicles formed to contain a much higher mole fraction (0.61-0.64) of TDMAO than the bulk sample (0.43) and predicted by Regular Solution Theory (RST, 0.46). In consequence, the unimer concentration of LiPFO is more than 5 times higher than predicted by RST. Second, the vesicle bilayer is asymmetric with a higher fraction of LiPFO on the outside. These findings on a model system should be of broader relevance for the understanding of similar mixed surfactant vesicle systems and thereby also be of importance for their use in a number of applications.

Microfluidic in-line dynamic light scattering with a commercial fibre optic system.

We report the coupling of dynamic light scattering (DLS) in microfluidics, using a contact-free fibre-optic system, enabling the under-flow characterisation of a range of solutions, dispersions, and structured fluids. The system is evaluated and validated with model systems, specifically micellar and (dilute) polymer solutions, and colloidal dispersions of different radii (∼1-100 nm). A systematic method of flow-DLS analysis is examined as a function of flow velocity (0-16 cm s-1), and considerations of the relative contribution of 'transit' and 'Brownian' terms enable the identification of regions where (i) a quiescent approximation suffices, (ii) the flow-DLS framework holds, as well as (iii) where deviations are found, until eventually (iv) the convection dominates. We investigate practically relevant, robust setups, namely that of a capillary connected to microdevice, as well as direct measurement on a glass microdevice, examining the role of capillary dimensions and challenges of optical alignment. We conclude with a demonstration of a continuous flow measurement of a binary surfactant/salt solution, whose micellar dimensions vary with composition, characterised with hundreds of data points (every ∼5 s) and adequate statistics, within a few minutes.

Ultra-/Small Angle X-ray Scattering (USAXS/SAXS) and Static Light Scattering (SLS) Modeling as a Tool to Determine Structural Changes and Effect on Growth in S. epidermidis.

Usually, to characterize bacterial cells' susceptibility to antimicrobials, basic microbiology techniques such as serial dilutions or disk assays are used. In this work, we present an approach focused on combining static light scattering (SLS) and ultra-/small angle X-ray scattering (USAXS/SAXS). This approach was used to support microbiology techniques, with the aim of understanding the structural changes caused to bacteria when they are exposed to different stresses like pH, oxidation, and surfactants. Using USAXS/SAXS and SLS data, we developed a detailed multiscale model for a Gram-positive bacterium, S. epidermidis, and we extracted information regarding changes in the overall size and cell thickness induced by different stresses (i.e., pH and hydrogen peroxide). Increasing the concentration of hydrogen peroxide leads to a progressive reduction in cell wall thickness. Moreover, the concomitant use of pH and hydrogen peroxide provides evidence for a synergy in inhibiting the S. epidermidis growth. These promising results will be used as a starting base to further investigate more complex formulations and improve/refine the data modeling of bacteria in the small angle scattering regime.

Liquid-liquid phase separated microdomains of an amphiphilic graft copolymer in a surfactant-rich medium.

The liquid-liquid phase separation (LLPS) of amphiphilic thermoresponsive copolymers can lead to the formation of micron-sized domains, known as simple coacervates. Due to their potential to confine active principles, these copolymer-rich droplets have gained interest as encapsulating agents. Understanding and controlling the conditions inducing this LLPS is therefore essential for applicative purposes and requires thorough fundamental studies on self-coacervation. In this work, we investigate the LLPS of a comb-like graft copolymer (PEG-g-PVAc) consisting of a poly(ethylene glycol) backbone (6 kDa) with ∼2-3 grafted poly(vinyl acetate) chains, and a PEG/PVAc weight ratio of 40/60. Specifically, we report the effect of various water-soluble additives on its phase separation behavior. Kosmotropes and non-ionic surfactants were found to decrease the phase separation temperature of the copolymer, while chaotropes and, above all, ionic surfactants increased it. We then focus on the phase behavior of PEG-g-PVAc in the presence of sodium citrate and a C14-15 E7 non-ionic surfactant (N45-7), defining the compositional range for the generation of LLPS microdomains at room temperature and monitoring their formation with fluorescence confocal microscopy. Finally, we determine the composition of the microdomains through confocal Raman microscopy, demonstrating the presence of PEG-g-PVAc, N45-7, and water. These results expand our knowledge on polymeric self-coacervation, clarifying the optimal conditions and composition needed to obtain LLPS microdomains with encapsulation potential at room temperature in surfactant-rich formulations.

Microfluidic SAXS Study of Lamellar and Multilamellar Vesicle Phases of Linear Sodium Alkylbenzenesulfonate Surfactant with Intrinsic Isomeric Distribution.

The structure and flow behavior of a concentrated aqueous solution (45 wt %) of the ubiquitous linear sodium alkylbenzenesulfonate (NaLAS) surfactant is investigated by microfluidic small-angle X-ray scattering (SAXS) at 70 °C. NaLAS is an intrinsically complex mixture of over 20 surfactant molecules, presenting coexisting micellar (L1) and lamellar (Lα) phases. Novel microfluidic devices were fabricated to ensure pressure and thermal resistance, ability to handle viscous fluids, and low SAXS background. Polarized light optical microscopy showed that the NaLAS solution exhibits wall slip in microchannels, with velocity profiles approaching plug flow. Microfluidic SAXS demonstrated the structural spatial heterogeneity of the system with a characteristic length scale of 50 nL. Using a statistical flow-SAXS analysis, we identified the micellar phase and multiple coexisting lamellar phases with a continuous distribution of d spacings between 37.5 and 39.5 Å. Additionally, we showed that the orientation of NaLAS lamellar phases is strongly affected by a single microfluidic constriction. The bilayers align parallel to the velocity field upon entering a constriction and perpendicular to it upon exiting. On the other hand, multilamellar vesicle phases are not affected under the same flow conditions. Our results demonstrate that despite the compositional complexity inherent to NaLAS, microfluidic SAXS can rigorously elucidate its structure and flow response.

Monitoring the transition from spherical to polymer-like surfactant micelles using small-angle X-ray scattering.

Despite over a century of modern surfactant science, the kinetic pathways of morphological transitions in micellar systems are still not well understood. This is mainly as a result of the lack of sufficiently fast methods that can capture the structural changes of such transitions. Herein, a simple surfactant system consisting of sodium dodecyl sulfate (SDS) in aqueous NaCl solutions is investigated. Combining synchrotron radiation small-angle X-ray scattering (SAXS) with fast stopped-flow mixing schemes allows monitoring the process where polymer-like micelles are formed from globular micelles when the salt concentration is suddenly increased. The results show that "worm-like" micelles are formed by fusion of globular micelles and short cylinders in a fashion that bears similarities to a step-like polymerization process.

Mechanism of aggregate formation in simplified industrial silica styrene-butadiene nanocomposites: effect of chain mass and grafting on rheology and structure.

The formation of aggregates in simplified industrial styrene-butadiene nanocomposites with silica filler has been studied using a recent model based on a combination of electron microscopy, computer simulations, and small-angle X-ray scattering. The influence of the chain mass (40 to 280 kg mol(-1), PI < 1.1), which sets the linear rheology of the samples, was investigated for a low (9.5 vol%) and high (19 vol%) silica volume fraction. 50% of the chains bear a single graftable end-group, and it is shown that the (chain-mass dependent) grafting density is the structure-determining parameter. A model unifying all available data on this system is proposed and used to determine a critical aggregate grafting density. The latter is found to be closely related to the mushroom-to-brush transition of the grafted layer. To our best knowledge, this is the first comprehensive evidence for the control of the complex nanoparticle aggregate structure in nanocomposites of industrial relevance by the physical parameters of the grafted layer.

Coaggregation of Two Anionic Azo Dyestuffs: A Combined Static Light Scattering and Small-Angle X-ray Scattering Study.

The formation of azo dyestuff aggregates in dilute aqueous solution induced by the addition of Mg2+, Ca2+, Sr2+, or Ba2+ ions is followed by time-resolved static light scattering (SLS) and time-resolved small-angle X-ray scattering (SAXS). Time-dependent molar mass data of the growing aggregates is interpreted by means of a kinetic model introduced by Lomakin et al. ( Proc. Natl. Acad. Sci. U.S.A. 1996 , 93 , 1125 ) for the description of ß-amyloid aggregation. This interpretation reveals significant trends within the homologous series of alkaline earth cations. The trends refer to the nucleation and the growth rate of the dyestuff fibers. Time-resolved SAXS experiments indicate that these first two stages are followed by a third one during which a network forms by partial lateral alignment of fibers. At high enough dyestuff concentrations, this network formation even leads to a gel-like phase. Anomalous SAXS (ASAXS) on such a gel phase formed upon the addition of Sr2+ revealed the extent of neutralization of the dyestuff molecules within the gel by the specifically interacting alkaline earth cations.

Studying Twin Samples Provides Evidence for a Unique Structure-Determining Parameter in Simplifed Industrial Nanocomposites.

The structure of styrene-butadiene (SB) nanocomposites filled with industrial silica has been analyzed using electron microscopy and small-angle X-ray scattering. The grafting density per unit silica surface ρD3 was varied by adding graftable SB molecules. By comparing the filler structures at fixed ρD3 (so-called "twins"), a surprising match of the microstructures was evidenced. Mechanical measurements show that ρD3 also sets the modulus: it is then possible to tune the terminal relaxation time of nanocomposites via the chain length while leaving the modulus and structure unchanged.

Direct observation of the formation of surfactant micelles under nonisothermal conditions by synchrotron SAXS.

Self-assembly of amphiphilic molecules into micelles occurs on very short times scales of typically some milliseconds, and the structural evolution is therefore very challenging to observe experimentally. While rate constants of surfactant micelle kinetics have been accessed by spectroscopic techniques for decades, so far no experiments providing detailed information on the structural evolution of surfactant micelles during their formation process have been reported. In this work we show that by applying synchrotron small-angle X-ray scattering (SAXS) in combination with the stopped-flow mixing technique, the entire micelle formation process from single surfactants to equilibrium micelles can be followed in situ. Using a sugar-based surfactant system of dodecyl maltoside (DDM) in dimethylformamide (DMF), micelle formation can be induced simply by adding water, and this can be followed in situ by SAXS. Mixing of water and DMF is an exothermic process where the micelle formation process occurs under nonisothermal conditions with a temperature gradient relaxing from about 40 to 20 °C. A kinetic nucleation and growth mechanism model describing micelle formation by insertion/expulsion of single molecules under nonisothermal conditions was developed and shown to describe the data very well.

Shaping vesicles-controlling size and stability by admixture of amphiphilic copolymer.

The production of structurally well-defined unilamellar vesicles and the control of their stability are of utmost importance for many of their applications but still a largely unresolved practical issue. In the present work we show that by admixing small amounts of amphiphilic copolymer to the original components of a spontaneously vesicle-forming surfactant mixture we are able to control the self-assembly process in a systematic way. For this purpose we employed a zwitanionic model system of zwitterionic TMDAO and anionic LiPFOS. As the copolymer reduces the line tension of the intermediately formed disks, this translates directly into a longer disk growth phase and formation of correspondingly larger vesicles. By this approach we are able to vary their size over a large range and produce vesicles of extremely low polydispersity. Furthermore, the temporal stability of the formed vesicles is enhanced by orders of magnitude in proportion to the concentration of copolymer added. This is achieved by exerting kinetic control that allows engineering the vesicle structure via a detailed knowledge of the formation pathway as obtained by highly time-resolved SAXS experiments. Synthesis of such very well-defined vesicles by the method shown should in general be applicable to catanionic or zwitanionic amphiphiles and will have far reaching consequences for controlled nanostructure formation and application of these self-assembled systems.

Drying dip-coated colloidal films.

We present the results from a small-angle X-ray scattering (SAXS) study of lateral drying in thin films. The films, initially 10 µm thick, are cast by dip-coating a mica sheet in an aqueous silica dispersion (particle radius 8 nm, volume fraction ϕ(s) = 0.14). During evaporation, a drying front sweeps across the film. An X-ray beam is focused on a selected spot of the film, and SAXS patterns are recorded at regular time intervals. As the film evaporates, SAXS spectra measure the ordering of particles, their volume fraction, the film thickness, and the water content, and a video camera images the solid regions of the film, recognized through their scattering of light. We find that the colloidal dispersion is first concentrated to ϕ(s) = 0.3, where the silica particles begin to jam under the effect of their repulsive interactions. Then the particles aggregate until they form a cohesive wet solid at ϕ(s) = 0.68 ± 0.02. Further evaporation from the wet solid leads to evacuation of water from pores of the film but leaves a residual water fraction ϕ(w) = 0.16. The whole drying process is completed within 3 min. An important finding is that, in any spot (away from boundaries), the number of particles is conserved throughout this drying process, leading to the formation of a homogeneous deposit. This implies that no flow of particles occurs in our films during drying, a behavior distinct to that encountered in the iconic coffee-stain drying. It is argued that this type of evolution is associated with the formation of a transition region that propagates ahead of the drying front. In this region the gradient of osmotic pressure balances the drag force exerted on the particles by capillary flow toward the liquid-solid front.

Colloidal structure and stability of DNA/polycations polyplexes investigated by small angle scattering.

Polyplexes of short DNA-fragments (300 b.p., 100 nm) with tailor-made amine-based polycations of different architectures (linear and hyperbranched) were investigated in buffer solution as a function of the mixing ratio with DNA. The resulting dispersed polyplexes were characterized using small-angle neutron and X-ray scattering (SANS, SAXS) as well as cryo-TEM with respect to their mesoscopic structure and their colloidal stability. The linear polyimines form rather compact structures that have a high tendency for precipitation. In contrast, the hyperbranched polycation with enzymatic-labile pentaethylenehexamine arms (PEHA) yields polyplexes colloidally stable for months. Here the polycation coating of DNA results in a homogeneous dispersion based on a fractal network with low structural organization at low polycation amount. With increasing polycation, bundles of tens of aligned DNA rods appear that are interconnected in a fractal network with a typical correlation distance on the order of 100 nm, the average length of the DNA used. With higher organization comes a decrease in stability. The 3D network built by these beams can still exhibit some stability as long as the material concentration is large enough, but the structure collapses upon dilution. SAXS shows that the complexation does not affect the local DNA structure. Interestingly, the structural findings on the DNA polyplexes apparently correlate with the transfection efficiency of corresponding siRNA complexes. In general, these finding not only show systematic trends for the colloid stability, but may allow for rational approaches to design effective transfection carriers.

Fast nucleation and growth of ZIF-8 nanocrystals monitored by time-resolved in situ small-angle and wide-angle X-ray scattering.

Prenucleation clusters: in situ synchrotron X-ray scattering with a one-second time resolution revealed the occurrence of nano-sized clusters during the nucleation and early growth of nanocrystals of a zeolitic imidazolate framework (ZIF). The complex crystallization process exhibits similarities with crystallization processes of zeolites from solution. Hmim= 2-methylimidazole.

Insight into asphaltene nanoaggregate structure inferred by small angle neutron and X-ray scattering.

Complementary neutron and X-ray small angle scattering results give prominent information on the asphaltene nanostructure. Precise SANS and SAXS measurements on a large q-scale were performed on the same dilute asphaltene-toluene solution, and absolute intensity scaling was carried out. Direct comparison of neutron and X-ray spectra enables description of a fractal organization made from the aggregation of small entities of 16 kDa, exhibiting an internal fine structure. Neutron contrast variation experiments enhance the description of this nanoaggregate in terms of core-shell disk organization, giving insight into core and shell dimensions and chemical compositions. The nanoaggregates are best described by a disk of total radius 32 Å with 30% polydispersity and a height of 6.7 Å. Composition and density calculations show that the core is a dense and aromatic structure, contrary to the shell, which is highly aliphatic. These results show a good agreement with the general view of the Yen model (Yen, T. F.; et al. Anal. Chem.1961, 33, 1587-1594) and as for the modified Yen model (Mullins, O. C. Energy Fuels2010, 24, 2179-2207), provide characteristic dimensions of the asphaltene nanoaggregate in good solvent.

Time-resolved small-angle X-ray scattering studies of polymer-silica nanocomposite particles: initial formation and subsequent silica redistribution.

Small angle X-ray scattering (SAXS) is a powerful characterization technique for the analysis of polymer-silica nanocomposite particles due to their relatively narrow particle size distributions and high electron density contrast between the polymer core and the silica shell. Time-resolved SAXS is used to follow the kinetics of both nanocomposite particle formation (via silica nanoparticle adsorption onto sterically stabilized poly(2-vinylpyridine) (P2VP) latex in dilute aqueous solution) and also the spontaneous redistribution of silica that occurs when such P2VP-silica nanocomposite particles are challenged by the addition of sterically stabilized P2VP latex. Silica adsorption is complete within a few seconds at 20 °C and the rate of adsorption strongly dependent on the extent of silica surface coverage. Similar very short time scales for silica redistribution are consistent with facile silica exchange occurring as a result of rapid interparticle collisions due to Brownian motion; this interpretation is consistent with a zeroth-order Smoluchowski-type calculation.

Multiple scale reorganization of electrostatic complexes of poly(styrenesulfonate) and lysozyme.

We report on a SANS investigation into the potential for these structural reorganization of complexes composed of lysozyme and small PSS chains of opposite charge if the physicochemical conditions of the solutions are changed after their formation. Mixtures of solutions of lysozyme and PSS with high matter content and with an introduced charge ratio [-]/[+](intro) close to the electrostatic stoichiometry lead to suspensions that are macroscopically stable. They are composed at local scale of dense globular primary complexes of radius approximately 100 A; at a higher scale they are organized fractally with a dimension 2.1. We first show that the dilution of the solution of complexes, all other physicochemical parameters remaining constant, induces a macroscopic destabilization of the solutions but does not modify the structure of the complexes at submicronic scales. This suggests that the colloidal stability of the complexes can be explained by the interlocking of the fractal aggregates in a network at high concentration: dilution does not break the local aggregate structure, but it does destroy the network. We show, second, that the addition of salt does not change the almost frozen inner structure of the cores of the primary complexes, although it does encourage growth of the complexes; these coalesce into larger complexes as salt has partially screened the electrostatic repulsions between two primary complexes. These larger primary complexes remain aggregated with a fractal dimension of 2.1. Third, we show that the addition of PSS chains up to [-]/[+](intro) approximately 20, after the formation of the primary complex with a [-]/[+](intro) close to 1, only slightly changes the inner structure of the primary complexes. Moreover, in contrast to the synthesis achieved in the one-step mixing procedure where the proteins are unfolded for a range of [-]/[+](intro), the native conformation of the proteins is preserved inside the frozen core.

Amphiphilic dual brush block copolymers as "giant surfactants" and their aqueous self-assembly.

Amphiphilic dual brush diblock as well as symmetrical triblock polymers were synthesized by the overlay of the reversible addition-fragmentation chain transfer (RAFT) and the nitroxide mediated polymerization (NMP) techniques. While poly(ethylene glycol) brushes served as hydrophilic block, the hydrophobic block was made of polystyrene brushes. The resulting "giant surfactants" correspond structurally to the established amphiphilic diblock and triblock copolymer known as macrosurfactants. The aggregation behavior of the novel "giant surfactants" in aqueous solution was studied by dynamic light scattering, small-angle neutron scattering (SANS), and small-angle X-ray scattering (SAXS) over a large range in reciprocal space. Further, the self-assembled aggregates were investigated by scanning force microscopy (SFM) after deposition on differently functionalized ultraflat solid substrates. Despite the high fraction of hydrophobic segments, the polymers form stable mesoscopic, spherical aggregates with hydrodynamic diameters in the range of 150-350 nm. Though prepared from well-defined individual polymers, the aggregates show several similarities to hard core latexes. They are stable enough to be deposited without much changes onto surfaces, where they cluster and show spontaneous sorting according to their size within the clusters, with the larger aggregates being in the center.

Finite size and inner structure controlled by electrostatic screening in globular complexes of proteins and polyelectrolytes.

We present an extended structural study of globular complexes made by mixing a positively charged protein (lysozyme) and a negatively charged polyelectrolyte (PSS). We study the influence of all the parameters that may act on the structure of the complexes (charge densities and concentration of the species, partial hydrophobicity of the polyion chain, ionic strength). The structures on a scale range lying from 10 Å to 1000 Å are measured by SANS. Whatever the conditions, the same structure is found, based on the formation of dense ∼100 Å globules with a neutral core and a volume fraction of organic species (compacity) of ∼0.3. On the larger scale, the globules are arranged into fractal aggregates. Zetametry measurements show that the globular complexes have a total positive charge when the charge ratio of species introduced in the mixture [-]/[+]intro > 1 and a total negative charge when [-]/[+]intro < 1. This comes from the presence of charged species in slight excess in a layer at the surface of the globules. The globule finite size is determined by the Debye length 1/κ however the physicochemical parameters are modified in the system, as long as chain-protein interactions are of a simple electrostatic nature. The mean number of proteins per primary complex Nlyso_comp grows exponentially on a master curve with 1/κ. This enables to picture the mechanisms of formation of the complexes. There is an initial stage of formation where the growth of the complexes is only driven by attractions between opposite species associated with counterion release. During the growth of the complexes, the globules progressively repel themselves by electrostatic repulsion because their charge increases. When this repulsion becomes dominant in the system, the globules stop growing and behave like charged colloids: they aggregate with a RLCA process, which leads to the formation of fractal aggregates of dimension 2.1.