ABSTRACT
For the first time, a comprehensive review of the literature data on the use of apricot (Prunus armeniaca) biomass components as a sorption material for the treatment of wastewater and environmental water from various pollutants is carried out in the present study. In addition to a comprehensive analysis of contemporary studies, the current work carried out its own microstructural and energy dispersive studies. It shows that apricot kernel shell is a promising raw material for obtaining sorption materials that can be used to extract various pollutants from aqueous media. The parameters of sorption interaction are presented, at which the highest rate of removal of pollutants was achieved. It is shown that the sorption capacity of apricot biomass components can be increased by modifying it with various chemical reagents, as well as other physical and physicochemical methods. We reveal that most publications consider the use of the latter as a raw material for the production of activated carbons. It is established that the surface area and total pore space of activated carbons from apricot kernel shells depend on the modes of carbonization and activation. It is shown that activated carbons are effective adsorbents for removing various pollutants (metal ions, dyes, oil and oil products) from aqueous media. It was found that the adsorption isotherms of pollutants in most cases are best described by the Langmuir and Freundlich models, and the process kinetics is most often described by the pseudo-second-order model. The possibility of improving the sorption characteristics of apricot biomass during chemical or physicochemical treatment is also shown.
ABSTRACT
The ever-growing consumption and improper disposal of non-biodegradable plastic wastes is bringing worrisome perspectives on the lack of suitable environmentally correct solutions. Consequently, an increasing interest in the circular economy and sustainable techniques is being raised regarding the management of these wastes. The present work proposes an eco-friendly solution for the huge amount of discarded polyethylene terephthalate (PET) wastes by addition into soil-cement bricks. Room temperature molded 300 × 150 × 70 mm bricks were fabricated with mixtures of clay soil and ordinary Portland cement added with up to 30 wt.% of PET waste particles. Granulometric analysis of soil indicated it as sandy and adequate for brick fabrication. As for the PET particles, they can be considered non-plastic and sandy. The Atterberg consistency limits indicated that addition of 20 wt.% PET waste gives the highest plasticity limit of 17.3%; moreover, with PET waste addition there was an increase in the optimum moisture content for the compaction and decrease in specific weight. Standard tests showed an increase in compressive strength from 0.83 MPa for the plain soil-cement to 1.80 MPa for the 20 wt.% PET-added bricks. As for water absorption, all bricks displayed values between 15% and 16% that attended the standards and might be considered an alternative for non-structural applications, such as wall closures in building construction.
ABSTRACT
Quartz sandstone (QS) is a mine waste; therefore, its use in construction allows for both reducing the cost of the concrete and contributing to the utilization of waste. The scientific originality of this study is the identification of models of the effect of QS aggregate on the physicomechanical, durability characteristics, and eco-safety of greener high-strength concrete. The study used an energy-efficient method of non-thermal effects of electromagnetic pulses on the destruction mechanisms of quartz-containing raw materials. The characteristics of quartzite sandstone aggregates, including the natural activity of radionuclides, were comprehensively studied. The features of concrete hardening, including the formation of an interfacial transition zone between the aggregate and the cement matrix, were studied, taking into account the chemical and morphological features of quartzite sandstone. In addition, the microstructural and morphological properties of concrete were determined after a 28 day curing. In this study, the behaviors of the concrete with QS aggregate were investigated, bearing in mind the provisions of geomimetics science on the affinity of structures. The results obtained showed that the QS aggregate had the activity of natural radionuclides 3-4 times lower compared to traditional aggregates. Efficient greener concrete with a 46.3 MPa compressive strength, water permeability grade W14, and freeze-thaw resistance of 300 cycles were also obtained, demonstrating that the performance of this greener concrete was comparable to that of traditional concrete with more expensive granite or gabbro diabase aggregates.
