A Three-Dimensional Musculoskeletal Model of the Western Lowland Gorilla Foot: Examining Muscle Torques and Function.

Due to difficulty of obtaining accurate quantitative data on foot muscles, relatively little has been done to study foot muscle function in non-human apes. Gorilla feet are known to be similar in bony proportions and mechanics to those of humans, hence are key to understanding human foot evolution and its ecological context. We present the first 3D musculoskeletal computer model of a western lowland gorilla foot, giving muscle torques about the tarsometatarsal, metatarsophalangeal and interphalangeal joints of digits 2-5. Peak flexor torque around the fifth metatarsophalangeal joint occurs at a highly flexed position, suggesting an ability to maintain flexed postures around lateral metatarsophalangeal joints, useful for grasping vertical supports. For distal interphalangeal joints, flexor torques peaked the more medial the digit at relatively flexed postures. We report, for the first time, interossei acting upon proximal and distal interphalangeal joints. All these facilitate maintenance of flexed positions around distal interphalangeal joints, likely used for grasping of small supports/objects. Humans lack these features, suggesting that semi-arboreal early hominins made less use of the peripheral canopy than gorillines. Information here could be used in gorilla enclosure design to encourage wild-type locomotor repertoires in captivity.

A 3D musculoskeletal model of the western lowland gorilla hind limb: moment arms and torque of the hip, knee and ankle.

Three-dimensional musculoskeletal models have become increasingly common for investigating muscle moment arms in studies of vertebrate locomotion. In this study we present the first musculoskeletal model of a western lowland gorilla hind limb. Moment arms of individual muscles around the hip, knee and ankle were compared with previously published data derived from the experimental tendon travel method. Considerable differences were found which we attribute to the different methodologies in this specific case. In this instance, we argue that our 3D model provides more accurate and reliable moment arm data than previously published data on the gorilla because our model incorporates more detailed consideration of the 3D geometry of muscles and the geometric constraints that exist on their lines-of-action about limb joints. Our new data have led us to revaluate the previous conclusion that muscle moment arms in the gorilla hind limb are optimised for locomotion with crouched or flexed limb postures. Furthermore, we found that bipedalism and terrestrial quadrupedalism coincided more regularly with higher moment arms and torque around the hip, knee and ankle than did vertical climbing. This indicates that the ability of a gorilla to walk bipedally is not restricted by musculoskeletal adaptations for quadrupedalism and vertical climbing, at least in terms of moment arms and torque about hind limb joints.

Analysis of joint force and torque for the human and non-human ape foot during bipedal walking with implications for the evolution of the foot.

The feet of apes have a different morphology from those of humans. Until now, it has merely been assumed that the morphology seen in humans must be adaptive for habitual bipedal walking, as the habitual use of bipedal walking is generally regarded as one of the most clear-cut differences between humans and apes. This study asks simply whether human skeletal proportions do actually enhance foot performance during human-like bipedalism, by examining the influence of foot proportions on force, torque and work in the foot joints during simulated bipedal walking. Skeletons of the common chimpanzee, orangutan, gorilla and human were represented by multi-rigid-body models, where the components of the foot make external contact via finite element surfaces. The models were driven by identical joint motion functions collected from experiments on human walking. Simulated contact forces between the ground and the foot were found to be reasonably comparable with measurements made during human walking using pressure- and force-platforms. Joint force, torque and work in the foot were then predicted. Within the limitations of our model, the results show that during simulated human-like bipedal walking, (1) the human and non-human ape (NHA) feet carry similar joint forces, although the distributions of the forces differ; (2) the NHA foot incurs larger joint torques than does the human foot, although the human foot has higher values in the first tarso-metatarsal and metatarso-phalangeal joints, whereas the NHA foot incurs higher values in the lateral digits; and (3) total work in the metatarso-phalangeal joints is lower in the human foot than in the NHA foot. The results indicate that human foot proportions are indeed well suited to performance in normal human walking.

The extraordinary athletic performance of leaping gibbons.

The distance that animals leap depends on their take-off angle and velocity. The velocity is generated solely by mechanical work during the push-off phase of standing-start leaps. Gibbons are capable of exceptional leaping performance, crossing gaps in the forest canopy exceeding 10 m, yet possess none of the adaptations possessed by specialist leapers synonymous with maximizing mechanical work. To understand this impressive performance, we recorded leaps of the gibbons exceeding 3.7 m. Gibbons perform more mass-specific work (35.4 J kg(-1)) than reported for any other species to date, accelerating to 8.3 ms(-1) in a single movement and redefining our estimates of work performance by animals. This energy (enough for a 3.5 m vertical leap) is 60 per cent higher than that achieved by galagos, which are renowned for their remarkable leaping performance. The gibbons' unusual morphology facilitates a division of labour among the hind limbs, forelimbs and trunk, resulting in modest power requirements compared with more specialized leapers.

Functional adaptations in the forelimb muscles of non-human great apes.

The maximum capability of a muscle can be estimated from simple measurements of muscle architecture such as muscle belly mass, fascicle length and physiological cross-sectional area. While the hindlimb anatomy of the non-human apes has been studied in some detail, a comparative study of the forelimb architecture across a number of species has never been undertaken. Here we present data from chimpanzees, bonobos, gorillas and an orangutan to ascertain if, and where, there are functional differences relating to their different locomotor repertoires and habitat usage. We employed a combination of analyses including allometric scaling and ancovas to explore the data, as the sample size was relatively small and heterogeneous (specimens of different sizes, ages and sex). Overall, subject to possible unidentified, confounding factors such as age effects, it appears that the non-human great apes in this sample (the largest assembled to date) do not vary greatly across different muscle architecture parameters, even though they perform different locomotor behaviours at different frequencies. Therefore, it currently appears that the time spent performing a particular behaviour does not necessarily impose a dominating selective influence on the soft-tissue portion of the musculoskeletal system; rather, the overall consistency of muscle architectural properties both between and within the Asian and African apes strengthens the case for the hypothesis of a possible ancient shared evolutionary origin for orthogrady under compressive and/or suspensory loading in the great apes.

The effect of substrate compliance on the biomechanics of gibbon leaps.

The storage and recovery of elastic strain energy in the musculoskeletal systems of locomoting animals has been extensively studied, yet the external environment represents a second potentially useful energy store that has often been neglected. Recent studies have highlighted the ability of orangutans to usefully recover energy from swaying trees to minimise the cost of gap crossing. Although mechanically similar mechanisms have been hypothesised for wild leaping primates, to date no such energy recovery mechanisms have been demonstrated biomechanically in leapers. We used a setup consisting of a forceplate and two high-speed video cameras to conduct a biomechanical analysis of captive gibbons leaping from stiff and compliant poles. We found that the gibbons minimised pole deflection by using different leaping strategies. Two leap types were used: slower orthograde leaps and more rapid pronograde leaps. The slower leaps used a wider hip joint excursion to negate the downward movement of the pole, using more impulse to power the leap, but with no increase in work done on the centre of mass. Greater hip excursion also minimised the effective leap distance during orthograde leaps. The more rapid leaps conversely applied peak force earlier in stance where the pole was effectively stiffer, minimising deflection and potential energy loss. Neither leap type appeared to usefully recover energy from the pole to increase leap performance, but the gibbons demonstrated an ability to best adapt their leap biomechanics to counter the negative effects of the compliant pole.

Muscle moment arms of the gibbon hind limb: implications for hylobatid locomotion.

Muscles facilitate skeletal movement via the production of a torque or moment about a joint. The magnitude of the moment produced depends on both the force of muscular contraction and the size of the moment arm used to rotate the joint. Hence, larger muscle moment arms generate larger joint torques and forces at the point of application. The moment arms of a number of gibbon hind limb muscles were measured on four cadaveric specimens (one Hylobates lar, one H. moloch and two H. syndactylus). The tendon travel technique was used, utilizing an electro-goniometer and a linear voltage displacement transducer. The data were analysed using a technique based on a differentiated cubic spline and normalized to remove the effect of body size. The data demonstrated a functional differentiation between voluminous muscles with short fascicles having small muscle moment arms and muscles with longer fascicles and comparatively smaller physiological cross-sectional area having longer muscle moment arms. The functional implications of these particular configurations were simulated using a simple geometric fascicle strain model that predicts that the rectus femoris and gastrocnemius muscles are more likely to act primarily at their distal joints (knee and ankle, respectively) because they have short fascicles. The data also show that the main hip and knee extensors maintain a very small moment arm throughout the range of joint angles seen in the locomotion of gibbons, which (coupled to voluminous, short-fascicled muscles) might help facilitate rapid joint rotation during powerful movements.

Mechanical constraints on the functional morphology of the gibbon hind limb.

Gibbons utilize a number of locomotor modes in the wild, including bipedalism, leaping and, most of all, brachiation. Each locomotor mode puts specific constraints on the morphology of the animal; in some cases these may be complementary, whereas in others they may conflict. Despite several studies of the locomotor biomechanics of gibbons, very little is known about the musculoskeletal architecture of the limbs. In this study, we present quantitative anatomical data of the hind limb for four species of gibbon (Hylobates lar, H. moloch, H. pileatus and Symphalangus syndactylus). Muscle mass and fascicle lengths were obtained from all of the major hind limb muscles and the physiological cross-sectional area was calculated and scaled to remove the effect of body size. The results clearly indicate that, for all of the species studied, the major hip, knee and ankle extensors are short-fascicled and pennate. The major hip and knee flexors, however, are long-fascicled, parallel muscles with relatively small physiological cross-sectional areas. We hypothesize that the short-fascicled muscles could be coupled with a power-amplifying mechanism and are predominantly useful in leaping. The long-fascicled knee and hip flexors are adapted for a wide range of joint postures and can play a role in flexing the legs during brachiation.

Inertial properties of hominoid limb segments.

Quantitative, accurate data regarding the inertial properties of body segments are of paramount importance when developing musculo-skeletal locomotor models of living animals and, by inference, their ancestors. The limited number of available primate cadavers, and the destructive nature of the post-mortem, result in such data being very rare for primates. This study builds on the work of Crompton et al. (Am. J. Phys. Anthropol. 1996, 99, 547-570) and reports inertial properties of the body segments of gorillas, chimpanzees, orangutans and gibbons. Segment mass, centre of mass and the radius of gyration of five ape cadavers were measured using a complex-pendulum technique and compared with the results derived from external measurements of segment lengths and diameters on the same animals. With additional data from external measurements of eight more hominoid cadavers, and published data, intergeneric differences between the inertial properties and the distribution of mass between limb segments are analysed and related to the locomotor habits of the species. We found that segment inertial properties show extensive overlap between ape genera as a result of large interindividual variation. Segment mass distribution also overlaps between apes and humans, with the exception of the shank segment. However, owing to a different distribution of mass between the limb segments, the centre of mass of both the arms and the legs is located more distally in apes than in humans, and the natural pendular period of ape forelimbs is larger than that of the hindlimbs. This suggests that, in contrast to the limbs of cursorial mammals and cercopithecoid primates, hominoid limbs are not optimized for efficiency in quadrupedal walking, but rather reflect a compromise between various locomotor modes. Common chimpanzees may have secondarily evolved a more efficient quadrupedal gait.

Comparison of inverse-dynamics musculo-skeletal models of AL 288-1 Australopithecus afarensis and KNM-WT 15000 Homo ergaster to modern humans, with implications for the evolution of bipedalism.

Size and proportions of the postcranial skeleton differ markedly between Australopithecus afarensis and Homo ergaster, and between the latter and modern Homo sapiens. This study uses computer simulations of gait in models derived from the best-known skeletons of these species (AL 288-1, Australopithecus afarensis, 3.18 million year ago) and KNM-WT 15000 (Homo ergaster, 1.5-1.8 million year ago) compared to models of adult human males and females, to estimate the required muscle power during bipedal walking, and to compare this with those in modern humans. Skeletal measurements were carried out on a cast of KNM-WT 15000, but for AL 288-1 were taken from the literature. Muscle attachments were applied to the models based on their position relative to the bone in modern humans. Joint motions and moments from experiments on human walking were input into the models to calculate muscle stress and power. The models were tested in erect walking and 'bent-hip bent-knee' gait. Calculated muscle forces were verified against EMG activity phases from experimental data, with reference to reasonable activation/force delays. Calculated muscle powers are reasonably comparable to experimentally derived metabolic values from the literature, given likely values for muscle efficiency. The results show that: 1) if evaluated by the power expenditure per unit of mass (W/kg) in walking, AL 288-1 and KNM-WT 15000 would need similar power to modern humans; however, 2) with distance-specific parameters as the criteria, AL 288-1 would require to expend relatively more muscle power (W/kg.m(-1)) in comparison to modern humans. The results imply that in the evolution of bipedalism, body proportions, for example those of KNM-WT 15000, may have evolved to obtain an effective application of muscle power to bipedal walking over a long distance, or at high speed.