Strain-Induced Surface Interface Dual Polarization Constructs PML-Cu/Bi12O17Br2 High-Density Active Sites for CO2 Photoreduction.

The insufficient active sites and slow interfacial charge transfer of photocatalysts restrict the efficiency of CO2 photoreduction. The synchronized modulation of the above key issues is demanding and challenging. Herein, strain-induced strategy is developed to construct the Bi-O-bonded interface in Cu porphyrin-based monoatomic layer (PML-Cu) and Bi12O17Br2 (BOB), which triggers the surface interface dual polarization of PML-Cu/BOB (PBOB). In this multi-step polarization, the built-in electric field formed between the interfaces induces the electron transfer from conduction band (CB) of BOB to CB of PML-Cu and suppresses its reverse migration. Moreover, the surface polarization of PML-Cu further promotes the electron converge in Cu atoms. The introduction of PML-Cu endows a high density of dispersed Cu active sites on the surface of PBOB, significantly promoting the adsorption and activation of CO2 and CO desorption. The conversion rate of CO2 photoreduction to CO for PBOB can reach 584.3 µmol g-1, which is 7.83 times higher than BOB and 20.01 times than PML-Cu. This work offers valuable insights into multi-step polarization regulation and active site design for catalysts.

Microstructure evolution under thermo-mechanical operating of rocksalt-structure TiN via neural network potential.

In the process of high temperature service, the mechanical properties of cutting tools decrease sharply due to the peeling of the protective coating. However, the mechanism of such coating failure remains obscure due to the complicated interaction between atomic structure, temperature, and stress. This dynamic evolution nature demands both large system sizes and accurate description on the atomic scale, raising challenges for existing atomic scale calculation methods. Here, we developed a deep neural network (DNN) potential for Ti-N binary systems based on first-principles study datasets to achieve quantum-accurate large-scale atomic simulation. Compared with empirical interatomic potential based on the embedded-atom-method, the developed DNN-potential can accurately predict lattice constants, phonon properties, and mechanical properties under various thermodynamic conditions. Moreover, for the first time, we present the atomic evolution of the fracture behavior of large-scale rocksalt-structure (B1) TiN systems coupled with temperature and stress conditions. Our study validates that interatomic brittle fractures occur when TiN stretches beyond its tensile yield point. Such simulation of coating fracture and cutting behavior based on large-scale atoms can shed new light on understanding the microstructure and mechanical properties of coating tools under extreme operating conditions.

[Clinical significance of PDGFRß gene testing in hematological tumors].

OBJECTIVE: To explore the clinical and laboratory characteristics of hematological tumors with different types of abnormalities in platelet derived growth factor ß (PDGFRß) gene. METHODS: A retrospective analysis was carried out on 141 patients with abnormal long arm of chromosome 5 (5q) and comprehensive medical history data from Changhai Hospital Affiliated to Naval Medical University from 2009 to 2020, and their clinical data were collected. R-banding technique was used for chromosomal karyotyping analysis for the patient's bone marrow, and fluorescence in situ hybridization (FISH) was used to detect the PDGFRß gene. The results of detection were divided into the amplification group, deletion group, and translocation group based on FISH signals. The three sets of data column crosstabs were statistically analyzed, and if the sample size was n >= 40 and the expected frequency T for each cell was >= 5, a Pearson test was used to compare the three groups of data. If N < 40 and any of the expected frequency T for each cell was < 5, a Fisher's exact test is used. Should there be a difference in the comparison results between the three sets of data, a Bonferroni method was further used to compare the data. RESULTS: In total 98 patients were detected to have PDGFRß gene abnormalities with the PDGFRß probe, which yielded a detection rate of 69.50% (98/141). Among these, 38 cases (38.78%) had PDGFRß gene amplifications, 57 cases (58.16%) had deletions, and 3 (3.06%) had translocations. Among the 98 cases, 93 were found to have complex karyotypes, including 37 cases from the amplification group (97.37%, 37/38), 55 cases from the deletion group (96.49%, 55/57), and 1 case from the translocation group (33.33%, 1/3). Analysis of three sets of clinical data showed no significant gender preponderance in the groups (P > 0.05). The PDGFRß deletion group was mainly associated with myeloid tumors, such as acute myeloid leukemia (AML) and myelodysplastic syndrome (MDS) (P < 0.001). The PDGFRß amplification group was more common in lymphoid tumors, such as multiple myeloma (MM) (P < 0.001). The PDGFRß translocation group was also more common in myelodysplastic/myeloproliferative tumors (MDS/MPN). CONCLUSION: Tumors with PDGFRß gene rearrangement may exhibit excessive proliferation of myeloproliferative tumors (MPN) and pathological hematopoietic changes in the MDS, and have typical clinical and hematological characteristics. As a relatively rare type of hematological tumor, in addition to previously described myeloid tumors such as MPN or MDS/MPN, it may also cover lymphoid/plasma cell tumors such as multiple myeloma and non-Hodgkin's lymphoma.

Applications of Probiotic Constituents in Cosmetics.

Over the past few decades, research on the benefits of beneficial microorganisms on skin health has expanded and attracted a lot of attention. Today, a wide range of probiotic products are becoming available. With their extensive component profiles and varied physiological effects, probiotics, as well as extracts of them, have a significant impact on cosmetics. However, the present boom in consumer interest in alternatives has broadened the probiotic industry's research and development frontiers. Considering the foregoing, it should come as no surprise that probiotics are highly valued for their proven anti-aging, skin whitening, anti-inflammatory, and photoprotective effects. This review aims to compile information on probiotics' properties, their extracts, and preparations used in cosmetics. It also further summarizes research and applications on probiotic fermentation to promote the use of probiotic fermentation products in cosmetics. Notably, this review also adds information on particular properties and mechanisms of action of probiotics, which fills a gap in the research and application of probiotics in skin treatment and care. Their antioxidant and anti-aging qualities have received particular consideration. This review provides a new basis for the broad application of probiotics in cosmetics.

Advances in Genetic Tools and Their Application in Streptococcus thermophilus.

Streptococcus thermophilus is a traditional starter. Nowadays, key aspects of S. thermophilus physiology have been revealed concerning the phenotypic traits relevant for industrial applications, including sugar metabolism, protein hydrolysis, and the production of important metabolites that affect the sensory properties of fermented foods as well as the original cooperation with Lactobacillus delbrueckii subsp. bulgaricus. Moreover, significant advances have been made in the synthetic biology toolbox of S. thermophilus based on technological advances in the genome and its sequencing and synthesis. In this review, we discuss the recently developed toolbox for S. thermophilus, including gene expression toolsets (promoters, terminators, plasmids, etc.) and genome editing tools. It can be used for both functionalized foods and therapeutic molecules for consumers. The availability of new molecular tools, including the genome editing toolbox, has facilitated the engineering of physiological studies of S. thermophilus and the generation of strains with improved technical and functional characteristics.

Study on the Strengthening Mechanism of a MIBC-PEG Mixed Surfactant on Foam Stability.

In the flotation process, the frother, which is typically a surfactant, can be added to the pulp to reduce the surface tension and create stable foam. Currently, the nonionic mixed surfactant is widely employed as the frother for fine coal flotation. In this study, we focused on examining the foam properties of a mixed surfactant comprising short-chain methyl isobutyl carbinol (MIBC) and long-chain polyethylene glycol-1000 (PEG). Analytical techniques such as surface tension measurement, dynamic foam stability measurement, bubble morphology observation, and foam film drainage measurement were used to investigate the foam properties in single and mixed surfactant solution from a macroscopic scale to a microscopic scale. The surface tension results indicated that PEG exhibited higher surface activity than MIBC, and the addition of PEG to MIBC resulted in a significant reduction in solution surface tension. The dynamic foam stability analysis revealed that the incorporation of a small amount of PEG into MIBC solution notably improved foam stability. Furthermore, the addition of PEG to the MIBC solution led to a shift in the bubble size distribution curve from a "double peak" to a "single peak" shape. This shift indicated a substantial reduction in bubble size, indicating an enhanced inhibition of bubble coalescence. Additionally, the liquid film drainage rate was significantly slowed down, and the stability of the liquid film was improved upon the addition of PEG to MIBC. This improvement can be attributed to the synergistic effect of MIBC and PEG molecules adsorbed at the gas-liquid interface. The synergistic effect of mixed MIBC-PEG was due to the additional surface tension gradient created by the difference in surface activity between PEG and MIBC. This surface tension gradient enhances the Marangoni flow of surfactant molecules, thereby improving the self-healing ability of the liquid film and increasing its stability.

Recent Advances and Future Prospects of Mycosporine-like Amino Acids.

Mycosporine-like amino acids (MAAs) are a class of water-soluble active substances produced by various aquatic organisms. However, due to the limitations of low accumulation of MAAs in organisms, the cumbersome extraction process, difficult identification, and high cost, MAAs have not yet been widely used in human life. Recently, there has been an emergence of heterologous synthesis for MAAs, making increasing yield the key to the quantification and application of MAAs. This review summarizes the latest research progress of MAAs, including: (1) introducing the biodistribution of MAAs and the content differences among different species to provide a reference for the selection of research subjects; (2) elaborating the species and molecular information of MAAs; (3) dissecting the synthesis mechanism and sorting out the synthesis pathways of various MAAs; (4) summarizing the methods of extraction and identification, summarizing the advantages and disadvantages, and providing a reference for the optimization of extraction protocols; (5) examining the heterologous synthesis method; and (6) summarizing the physiological functions of MAAs. This paper comprehensively updates the latest research status of MAAs and the various problems that need to be addressed, especially emphasizing the potential advantages of heterologous synthesis in the future production of MAAs.

Probiotics: functional food ingredients with the potential to reduce hypertension.

Hypertension is an increasingly pressing public health concern across the globe. It can be triggered by a variety of factors such as age and diet, as well as the stress of modern life. The traditional treatment of hypertension includes calcium ion blockers, angiotensin II receptor inhibitors and ß-receptor blockers, but these drugs have at least some side effects. Recent studies have revealed that intestinal flora plays a vital role in maintaining and promoting human health. This is due to the type and amount of probiotics present in the flora. Probiotics can reduce hypertension symptoms through four mechanisms: regulating vascular oxidative stress, producing short-chain fatty acids, restoring endothelial cell function, and reducing inflammation. It has been reported that certain functional foods, using probiotics as their raw material, can modify the composition of intestinal flora, thus regulating hypertension symptoms. Consequently, utilizing the probiotic function of probiotics in conjunction with the properties of functional foods to treat hypertension is a novel, side-effect-free treatment method. This study seeks to summarize the various factors that contribute to hypertension, the mechanism of probiotics in mitigating hypertension, and the fermented functional foods with probiotic strains, in order to provide a basis for the development of functional foods which utilize probiotics as their raw material and may have the potential to reduce hypertension.

Stripping mechanism and Gaussian distribution model of a concave bionic comb for stripping prior to cutting.

Stripping prior to cutting is a harvesting technique that only strips rice grains and obtains complete straws. This paper aims to solve the problems of high loss rate and short throwing distance for stripping prior to cutting. A concave bionic comb was developed based on the filiform papilla structure on the surface of a cattle tongue tip. The mechanism analysis and comparative research of the flat comb and the bionic comb were carried out. The results showed that when the arc radius was 5.0 mm, the magnification ratio of filiform papilla was 4.0, and the concave angle was 60°, the loss rate of falling grain was 4.3 %, and the loss rate of uncombed grain was 2.8 %. The diffusion angle of bionic comb was smaller than that of flat comb. The distribution characteristics of the thrown materials conformed to Gaussian distribution. Under the same working conditions, the falling grain loss rate and uncombed loss rate of the bionic comb were always lower than that of the flat comb. This study provides reference for the cross application of bionic technology and crop production field, promotes the harvesting way application of stripping prior to cutting in gramineous plants such as rice, wheat and sorghum, and provides a basis for harvesting the whole straws and expanding the way of comprehensive utilization of straws.

Development and validation of a prognostic 9-gene signature for colorectal cancer.

Introduction: Colorectal cancer (CRC) is one of the most prevalent cancers globally with a high mortality rate. Predicting prognosis using disease progression and cancer pathologic stage is insufficient, and a prognostic factor that can accurately evaluate patient prognosis needs to be developed. In this study, we aimed to infer a prognostic gene signature to identify a functional signature associated with the prognosis of CRC patients. Methods: First, we used univariate Cox regression, least absolute shrinkage and selection operator (lasso) regression, and multivariate Cox regression analyses to screen genes significantly associated with CRC patient prognosis, from colorectal cancer RNA sequencing data in The Cancer Genome Atlas (TCGA) database. We then calculated the risk score (RS) for each patient based on the expression of the nine candidate genes and developed a prognostic signature. Results: Based on the optimal cut-off on the receiver operating characteristic (ROC) curve, patients were separated into high- and low-risk groups, and the difference in overall survival between the two groups was examined. Patients in the low-risk group had a better overall survival rate than those in the high-risk group. The results were validated using the GSE72970, GSE39582, and GSE17536 Gene Expression Omnibus (GEO) datasets, and the same conclusions were reached. ROC curve test of the RS signature also indicated that it had excellent accuracy. The RS signature was then compared with traditional clinical factors as a prognostic indicator, and we discovered that the RS signature had superior predictive ability. Conclusion: The RS signature developed in this study has excellent predictive power for the prognosis of patients with CRC and broad applicability as a prognostic indicator for patients.

First-principles study of Mn antisite defect in Li2MnO3.

Lithium-rich layered Li2MnO3is regarded as a new generation cathode material for lithium-ion batteries because of its high energy density. Due to the different preparation methods and technological parameters, there are a lot of intrinsic defects in Li2MnO3. One frequently observed defect in experiments is Mn antisite defect (MnLi). In this work, we study the energetics and electronic properties involving MnLiin Li2MnO3through first-principles calculations. We find that MnLican reduce the formation energy of Li vacancies around it, but increase that of O vacancies, indicating that MnLicould suppress the release of O around it and facilitate capacity retention. Both O and Mn near the MnLican participate in charge compensation in the delithiation process. Furthermore, the effect of MnLion the migration of Li and Mn is investigated. All possible migration paths are considered and it is found that MnLimakes the diffusion energy barrier of Li increased, but the diffusion energy barriers of Mn from transition metal layer to Li layer are decreased, especially for the migration of the defect Mn. The insight into the defect properties of MnLimakes further contribution to understand the relationship between intrinsic defects and electrochemical properties of Li2MnO3.

Synergistic Adsorption Mechanism of Anionic and Cationic Surfactant Mixtures on Low-Rank Coal Flotation.

Mixed surfactants have a prominent synergistic effect and show advantages in many aspects. In this work, the effects of a mixture of dodecyltrimethylammonium bromide (DTAB) and sodium dodecyl sulfate (SDS) on the flotation of low-rank coal were studied from the wetting rate, contact angle, surface tension, and zeta potential. Furthermore, the adsorption configuration of the mixed surfactant on the surface of oxygen-containing graphite was simulated at the molecular level by molecular dynamics simulation. The experimental results show that the combustible matter recovery of low-rank coal flotation is improved using the mixed surfactant, and the contact angle test and wetting rate test confirmed the synergistic effect of the mixed surfactant. In the mixed surfactant system, the addition of SDS with an opposite charge to DTAB can reduce the mutual repulsion between DTAB molecules and enhance the degree of DTAB alignment in solution, which was analyzed by surface tension and zeta potential tests. Meanwhile, the simulation results reveal the adsorption behavior of anionic and cationic surfactants on the surface of oxygen-containing graphite from the molecular level and also verify the experimental results. This investigation provides a good understanding of the interaction mechanism of mixed surfactants in low-rank coal flotation.

Corrosion monitoring using a new compressed sensing-based tomographic method.

Corrosion damage of aircraft structures can significantly reduce the structural performance and endanger flight safety. There is a pressing need for research on aircraft structural corrosion monitoring technology. Lamb wave tomography (LWT) can be used to evaluate structural corrosion. However, the conventional tomographic method needs sensors with dense array, which is not easy to be satisfied in practice and limits its application. Due to the sparsity of corrosion damage in aircraft structures, compressed sensing (CS), which is an emerging signal processing technique, can be employed to optimize LWT. This paper presents a novel CS-based tomographic method to map out the internal situation of aircraft structure. Compared to conventional LWT, the CS-based tomographic method requires fewer sensors to detect the same corrosion damage while the imaging quality still maintains. The experimental study is carried out to diagnose the real corrosion damage by the new approach. Results show the advantages of the proposed CS-based tomographic method.

Recovering unburned carbon from gasification fly ash using saline water.

Gasification fly ash is one of the wastes generated by coal gasifiers, and the unburned carbon therein seriously restricts the resource utilization of gasification fly ash. Flotation is one of the best ways to recover unburned carbon from it; however, surface pores of gasification fly ash are developed and contain several hollow hydrophilic glass beads, which makes it difficult for conventional flotation to recover unburned carbon effectively and the dosage of the flotation reagent is too high. In this study, different concentrations of saline water (NaCl, MgCl2, and AlCl3) are configured to the flotation solution, and their effect on the recovery of unburned carbon of gasification fly ash is investigated. Furthermore, the gasification fly ash treated with saline water is chosen to study the basic properties by the measurement of Zeta potential, surface tension, and flotation foam behavior. The experimental results show that with an increase in the valence state of the inorganic salt cation, the unburned carbon recovery efficiency of the gasification fly ash is significantly improved. When the concentration of Al3+ reaches 0.4 mol/L and the dosage of frother is 7.5 kg/t, the unburned carbon removal rate of the tailings reaches 95% or more. Saline water reduces the surface tension of the flotation system and weakening bubble decay; in the solution of Al3+, the flotation foam size is the smallest, followed by the solution of Mg2+, Na+. Furthermore, the saline water effectively reduces the Zeta potential of the particle surface and improves the floatability of the solid particles.

Extent of agreement between the body fluid model of Sysmex XN-20 and the manual microscopy method.

BACKGROUND: Although the correlations concerning cellular component analysis between the Sysmex XN-20 body fluid (BF) model and manual microscopy have been investigated by several studies, the extent of agreement between these two methods has not been investigated. METHODS: A total of 90 BF samples were prospectively collected and analyzed using the Sysmex XN-20 BF model and microscopy. The extent of agreement between these two methods was evaluated using the Bland-Altman approach. Receiver operating characteristic (ROC) curve analysis was employed to evaluate the diagnostic accuracy of high-fluorescence (HF) BF cells for malignant diseases. RESULTS: The agreements of white blood cell (WBC), red blood cell (RBC), and percentages of neutrophils, lymphocytes, and monocytes between the Sysmex XN-20 BF model and manual microscopy were imperfect. The areas under the ROC curves for absolute and relative HF cells were 0.67 (95% confidence interval [CI]: 0.56-0.78) and 0.60 (95% CI: 0.48-0.72), respectively. CONCLUSION: Due to the Sysmex XN-20 BF model's imperfect agreement with manual microscopy and its weak diagnostic accuracy for malignant diseases, the current evidence does not support replacing manual microscopy with this model in clinical practice.