Formamidinium Lead Iodide-Based Inverted Perovskite Solar Cells with Efficiency over 25 % Enabled by An Amphiphilic Molecular Hole-Transporter.

Formamidinium lead iodide (FAPbI3) represents an optimal absorber material in perovskite solar cells (PSCs), while the application of FAPbI3 in inverted-structured PSCs has yet to be successful, mainly owing to its inferior film-forming on hydrophobic or defective hole-transporting substrates. Herein, we report a substantial improvement of FAPbI3-based inverted PSCs, which is realized by a multifunctional amphiphilic molecular hole-transporter, (2-(4-(10H-phenothiazin-10-yl)phenyl)-1-cyanovinyl)phosphonic acid (PTZ-CPA). The phenothiazine (PTZ) based PTZ-CPA, carrying a cyanovinyl phosphonic acid (CPA) group, forms a superwetting hole-selective underlayer that enables facile deposition of high-quality FAPbI3 thin films. Compared to a previously established carbazole-based hole-selective material (2-(3,6-dimethoxy-9H-carbazol-9-yl)ethyl)phosphonic acid (MeO-2PACz), the crystallinity of FAPbI3 is enhanced and the electronic defects are passivated by the PTZ-CPA more effectively, resulting in remarkable increases in photoluminescence quantum yield (four-fold) and Shockley-Read-Hall lifetime (eight-fold). Moreover, the PTZ-CPA shows a larger molecular dipole moment and improved energy level alignment with FAPbI3, benefiting the interfacial hole-collection. Consequently, FAPbI3-based inverted PSCs achieve an unprecedented efficiency of 25.35 % under simulated air mass 1.5 (AM1.5) sunlight. The PTZ-CPA based device shows commendable long-term stability, maintaining over 90 % of its initial efficiency after continuous operation at 40 °C for 2000 hours.

Structural Characterization and Immunomodulatory Activity of a Mannose-Rich Polysaccharide Isolated from Bifidobacterium breve H4-2.

In this study, a novel homogeneous mannose-rich polysaccharide named EPS-1 from the fermentation broth of Bifidobacterium breve H4-2 was isolated and purified by anion exchange column chromatography and gel column chromatography. The primary structure of EPS-1 was analyzed by high-performance liquid chromatography, Fourier-transform infrared spectroscopy, gas chromatography-mass spectrometry, and nuclear magnetic resonance. The results indicated that EPS-1 had typical functional groups of polysaccharides. EPS-1 with an average molecular weight of 3.99 × 104 Da was mainly composed of mannose (89.65%) and glucose (5.84%). The backbone of EPS-1 was →2,6)-α-d-Manp-(1→2)-α-d-Manp-(1→2,6)-α-d-Manp-(1→2)-α-d-Manp-(1→2,6)-α-d-Manp-(1→6)-α-d-Glcp-(1→ simultaneously containing two kinds of branched chains (α-d-Manp-(1→3)-α-d-Manp-(1→ and α-d-Manp-(1→). Besides, EPS-1 had a triple-helical conformation and exhibited excellent thermal stability. Moreover, the immunomodulatory activity of EPS-1 was evaluated by RAW 264.7 cells. Results indicated that EPS-1 significantly enhanced the viability of RAW 264.7 cells. EPS-1 could also be recognized by toll-like receptor 4, thereby activating the nuclear factors-κB (NF-κB) signaling pathway, promoting phosphorylation of related nuclear transcription factors, improving cell phagocytic activity, and promoting the secretion of NO, IL-6, IL-1ß, and TNF-α. Thus, EPS-1 could activate the TLR4-NF-κB signaling pathway to emerge immunomodulatory activity on macrophages. The above results indicate that EPS-1 can serve as a potential immune-stimulating polysaccharide.

Neglected acidity pitfall: boric acid-anchoring hole-selective contact for perovskite solar cells.

The spontaneous formation of self-assembly monolayer (SAM) on various substrates represents an effective strategy for interfacial engineering of optoelectronic devices. Hole-selective SAM is becoming popular among high-performance inverted perovskite solar cells (PSCs), but the presence of strong acidic anchors (such as -PO3H2) in state-of-the-art SAM is detrimental to device stability. Herein, we report for the first time that acidity-weakened boric acid can function as an alternative anchor to construct efficient SAM-based hole-selective contact (HSC) for PSCs. Theoretical calculations reveal that boric acid spontaneously chemisorbs onto indium tin oxide (ITO) surface with oxygen vacancies facilitating the adsorption progress. Spectroscopy and electrical measurements indicate that boric acid anchor significantly mitigates ITO corrosion. The excess boric acid containing molecules improves perovskite deposition and results in a coherent and well-passivated bottom interface, which boosts the fill factor (FF) performance for a variety of perovskite compositions. The optimal boric acid-anchoring HSC (MTPA-BA) can achieve power conversion efficiency close to 23% with a high FF of 85.2%. More importantly, the devices show improved stability: 90% of their initial efficiency is retained after 2400 h of storage (ISOS-D-1) or 400 h of operation (ISOS-L-1), which are 5-fold higher than those of phosphonic acid SAM-based devices. Acidity-weakened boric acid SAMs, which are friendly to ITO, exhibits well the great potential to improve the stability of the interface as well as the device.

Immobilizing Surface Halide in Perovskite Solar Cells via Calix[4]pyrrole.

Halide diffusion across the charge-transporting layer followed by a reaction with metal electrode represents a critical factor limiting the long-term stability of perovskite solar cells (PSCs). In this work, a supramolecular strategy with surface anion complexation is reported for enhancing the light and thermal stability of perovskite films, as well as devices. Calix[4]pyrrole (C[4]P) is demonstrated as a unique anion-binding agent for stabilizing the structure of perovskite by anchoring surface halides, which increases the activation energy for halide migration, thus effectively suppressing the halide-metal electrode reactions. The C[4]P-stabilized perovskite films preserve their initial morphology after ageing at 85 °C or under 1 sun illumination in humid air over 50 h, significantly outperforming the control samples. This strategy radically tackles the halide outward-diffusion issue without sacrificing charge extraction. Inverted-structured PSCs based on C[4]P modified formamidinium-cesium perovskite exhibit a champion power conversion efficiency of over 23%. The lifespans of unsealed PSCs are unprecedentedly prolonged from dozens of hours to over 2000 h under operation (ISOS-L-1) and 85 °C ageing (ISOS-D-2). When subjected to a harsher protocol of ISOS-L-2 with both light and thermal stresses, the C[4]P-based PSCs maintain 87% of original efficiency after ageing for 500 h.

Bifidobacterium breve Alleviates DSS-Induced Colitis in Mice by Maintaining the Mucosal and Epithelial Barriers and Modulating Gut Microbes.

This study was designed to explore the different intestinal barrier repair mechanisms of Bifidobacterium breve (B. breve) H4-2 and H9-3 with different exopolysaccharide (EPS) production in mice with colitis. The lipopolysaccharide (LPS)-induced IEC-6 cell inflammation model and dextran sulphate sodium (DSS)-induced mice colitis model were used. Histopathological changes, epithelial barrier integrity, short-chain fatty acid (SCFA) content, cytokine levels, NF-κB expression level, and intestinal flora were analyzed to evaluate the role of B. breve in alleviating colitis. Cell experiments indicated that both B. breve strains could regulate cytokine levels. In vivo experiments confirmed that oral administration of B. breve H4-2 and B. breve H9-3 significantly increased the expression of mucin, occludin, claudin-1, ZO-1, decreased the levels of IL-6, TNF-α, IL-1ß and increased IL-10. Both strains of B. breve also inhibited the expression of the NF-κB signaling pathway. Moreover, B. breve H4-2 and H9-3 intervention significantly increased the levels of SCFAs, reduced the abundance of Proteobacteria and Bacteroidea, and increased the abundance of Muribaculaceae. These results demonstrate that EPS-producing B. breve strains H4-2 and H9-3 can regulate the physical, immune, and microbial barrier to repair the intestinal damage caused by DSS in mice. Of the two strains, H4-2 had a higher EPS output and was more effective at repair than H9-3. These results will provide insights useful for clinical applications and the development of probiotic products for the treatment of colitis.

Molecular Engineering of Star-Shaped Indoline Hole Transport Materials: The Influence of Planarity on the Hole Extraction and Transport Processes.

As the key properties of perovskite solar cells (PSCs), the hole extraction and transport capabilities of the hole transport material (HTM) affect the photovoltaic performance of PSCs to a considerable extent, while both capabilities can be adjusted by molecular planarity. Therefore, in this work, the molecular planarity of the HTM is systematically optimized to regulate the hole extraction and transport capabilities. Along with the improvement in planarity, the HTM's HOMO level is increased, leading to the enhancement of hole extraction capability. Meanwhile, the hole transport capability can also be improved due to the intensification of molecular stacking during the film formation. As a result, the planar HTM achieves a relatively high efficiency of 18.48 %, which is higher than that of spiro-OMeTAD. Accordingly, the molecular planarity presents an important impact on the photovoltaic performance of PSCs, providing us with a promising strategy for further optimization of efficient HTMs.

Dopant-free hole-transporting materials for stable Sb2(S,Se)3 solar cells.

Herein, we demonstrate that a thiophene-modified quinoxaline core small molecule can be applied in Sb2(S,Se)3 solar cells. We reveal that the interaction between thiophene and Sb2(S,Se)3 through the Sb-S bond essentially improves the interfacial hole-extraction ability. This study provides a cost-effective dopant-free hole-transporting material for inorganic thin film solar cell applications with excellent stability.

Efficient and Stable Methylammonium-Free Tin-Lead Perovskite Solar Cells with Hexaazatrinaphthylene-Based Hole-Transporting Materials.

Incorporating non-aqueous hole-transporting materials (HTMs) to replace the widely used PEDOT:PSS is favorable for improving the stability of tin-lead perovskite solar cells (Sn-Pb PSCs). Herein, hexaazatrinaphthylene (HATNA) is found to be a promising HTM building block for Sn-Pb PSCs. By introducing triphenylamine (TPA) and methoxy-triphenylamine into the HATNA core, molecular energy levels and surface wettability can be well regulated, and a high hole mobility and thermal stability can be maintained. Moreover, a homogeneous Sn-Pb perovskite film with low Sn4+ contents and vertically orientated grains can be prepared on the substrate TPA-HATNA. Compared with PEDOT:PSS, the optimal TPA-HATNA-based methylammonium-free device enables a 70 mV increase in VOC, delivering a remarkable PCE exceeding 18% (certified 16.4%). Impressively, the TPA-HATNA-based devices without encapsulation retain 90% efficiency after aging for 600 min under maximum-power-point tracking. Our work provides alternative HTMs for boosting the performance of Sn-Pb PSCs.

Lignin Nanoparticles: Promising Sustainable Building Blocks of Photoluminescent and Haze Films for Improving Efficiency of Solar Cells.

Films with the capacity for photoluminescence and haze, which can convert UV to visible light and enhance light management, are of great importance for optoelectronic devices. Here, taking advantage of the inherent fluorescence and self-assembly properties of lignin, we have developed a sustainable lignin-derived multifunctional dopant (L-MS-NPs) for fabricating optical films with haze, fluorescence, and room-temperature phosphorescence (RTP) together with poly(vinyl alcohol) (PVA). The optical films are used to improve the light-harvesting efficiency of solar cells. Specifically, attributed to the robust morphology in the film matrix, L-MS-NPs cause a rough morphology in the surface of an L-MS-NPs/PVA composite film, which eventually triggers the great optical haze. Additionally, L-MS-NPs inherit fluorescence properties from lignin and show fluorescence emission when embed in the film matrix. Moreover, the PVA film matrix can stabilize the excited triplet state, which finally induces RTP of L-MS-NPs. The combined haze, fluorescence, and RTP properties of the L-MS-NPs/PVA composite film enhances the power conversion efficiency (PCE) of dye-sensitized solar cells from ∼3.9 to ∼4.1%.

A Coplanar π-Extended Quinoxaline Based Hole-Transporting Material Enabling over 21 % Efficiency for Dopant-Free Perovskite Solar Cells.

Developing dopant-free hole transporting materials (HTMs) is of vital importance for addressing the notorious stability issue of perovskite solar cells (PSCs). However, efficient dopant-free HTMs are scarce. Herein, we improve the performance of dopant-free HTMs featuring with a quinoxaline core via rational π-extension. Upon incorporating rotatable or chemically fixed thienyl substitutes on the pyrazine ring, the resulting molecular HTMs TQ3 and TQ4 show completely different molecular arrangement as well as charge transporting capabilities. Comparing with TQ3, the coplanar π-extended quinoxaline based TQ4 endows enriched intermolecular interactions and stronger π-π stacking, thus achieving a higher hole mobility of 2.08×10-4  cm2 V-1 s-1 . It also shows matched energy levels and high thermal stability for application in PSCs. Planar n-i-p structured PSCs employing dopant-free TQ4 as HTM exhibits power conversion efficiency (PCE) over 21 % with excellent long-term stability.