ABSTRACT
BACKGROUND: Compared to adult scoliosis, correcting scoliosis in children often presents greater challenges. This is attributed to two key factors. Firstly, it involves accounting for the growth potential of children. Secondly, the thinner pedicles in children can complicate screw insertion, particularly when dealing with existing deformities. The utilization of intraoperative navigation technology offers a modest improvement in the precision of screw placement but does come with the drawback of increased radiation exposure. The aim of this study is to investigate and assess the accuracy of manually inserting pedicle screws in the thoracic and lumbar spine to rectify deformities in children with early-onset congenital scoliosis. METHODS: In this retrospective study, 26 hospitalized patients diagnosed with early-onset congenital scoliosis between December 2014 and December 2019 were selected. The cohort comprised 16 boys and 10 girls, aged between 2 and 10 years, with an average age of 4.68 ± 2.42 years. Pedicle screw fixation was applied in the segment spanning from T1 to L5. Pedicle screws were inserted manually, guided by the positioning of the C-arm and anatomical markers. The assessment of pedicle screw placement was based on the distance of penetration into the medial, lateral, or anterior bone cortex of the vertebral body, including the pedicle, categorized into three grades: Grade 1 (placement <2 mm), Grade 2 (placement between 2-4 mm), and Grade 3 (placement >4 mm). Grade 1 indicates accurate pedicle screw placement, while Grades 2 and 3 signify abnormal pedicle screw placement. Complications related to pedicle screw insertion were also recorded, both during and after the surgical procedure. RESULTS: A total of 173 pedicle screws were inserted in this study, with an average of 6.65 screws per patient. Accurate screw placement was achieved in 143 cases (82.7%), while 30 pedicle screws were found to be abnormal. Among the abnormal screws, 24 were categorized as Grade 2 (13.9%), and 6 as Grade 3 (3.5%). Grade 2 abnormalities were distributed across 20 thoracic vertebrae and 4 lumbar vertebrae, while Grade 3 abnormalities affected 5 thoracic vertebrae and 1 lumbar vertebra. When comparing the lumbar and thoracic vertebral regions, a significant difference in the rate of abnormal screw placement was observed (χ2 = 5.801, p < 0.05). The rate of abnormal screw placement was higher in the thoracic vertebral region with abnormal vertebral bodies than in the lumbar vertebral regions. Furthermore, a statistically significant difference in the rate of abnormal screw placement was found between the concave and convex sides (χ2 = 23.047, p < 0.05). The concave side of the abnormal vertebral body had a higher rate of abnormal screw placement (55.6%, 15/27) compared to the convex side (20.1%, 7/34), and this difference was statistically significant (p < 0.05). Throughout the intraoperative and postoperative follow-up period, spanning from 12 to 56 months, only one patient experienced issues with wound healing, and no complications related to pedicle screw placement occurred, such as hemopneumothorax, pedicle fracture, nerve root injury, aortic injury, screw loosening, pullout or breakage, or spinal cord injury. CONCLUSIONS: In children under 10 years of age with early-onset congenital scoliosis, the freehand placement of thoracic and lumbar pedicle screws demonstrates a high level of accuracy. Moreover, complications associated with pedicle screw insertion are infrequent following surgery. It is advisable to exercise caution when placing pedicle screws in thoracic vertebral bodies and morphologically abnormal vertebral bodies, with particular attention to the concave side when screw placement is required in these regions.
Subject(s)
Pedicle Screws , Scoliosis , Male , Adult , Child , Female , Humans , Child, Preschool , Scoliosis/diagnostic imaging , Scoliosis/surgery , Scoliosis/congenital , Retrospective Studies , Thoracic Vertebrae/surgery , BackABSTRACT
BACKGROUND: To investigate the functional and aesthetic results of a new modified Bilhaut-Cloquet procedure for the treatment of Wassel type III-IV thumb polydactyly. METHODS: Thirteen patients with Wassel type III-IV thumb polydactyly who visited the Department of Orthopedics of Hebei Provincial Children's Hospital from 2019 to 2022 were selected. The surgical procedure involved a modified Bilhaut-Cloquet surgery, where two-thirds of the distal part of the dominant finger was retained as the p body of the reconstructed thumb. The triangular bone block of the ablated distal thumb that did not contain the epiphysis and articular cartilage was sutured and fixed, and the neurovascular flap of the ablated distal thumb was used as an augmenting segment of the reconstructed thumb, with the nail bed and nail matrix exquisitely sutured. The evaluation performed according to the Japanese Society for Surgery of the Hand (JSSH) system. RESULTS: All 13 children showed bone healing, no wound infection, nonunion, or deformity healing. None of the children showed a significant reduction in the active and passive mobility of the thumb postoperatively compared with preoperatively. Postoperative evaluation was performed based on the JSSH score, with a mean of 17.15 points (14-19 points), with 11 children rated as excellent and two as good. No severe nail ridges, nail gaps, or nail split deformities of the thumb were observed postoperatively. Postoperative metacarpophalangeal and interphalangeal joint movements were not reduced compared with preoperative movements. All parents were satisfied with the appearance and function of the reconstructed thumb. CONCLUSION: The modified Bilhaut-Cloquet procedure designed in this study was satisfactory for Wassel type III-IV thumb polydactyly without affecting the stability of the interphalangeal joints and preserving joint mobility. The postoperative thumb has a comparable circumference and nail width and was cosmetically and functionally satisfactory, especially for the asymmetric two thumbs, which achieved favorable results.
Subject(s)
Orthopedic Procedures , Polydactyly , Child , Humans , Infant , Polydactyly/diagnostic imaging , Polydactyly/surgery , Orthopedic Procedures/methods , Thumb/diagnostic imaging , Thumb/surgery , Thumb/abnormalities , Wound HealingABSTRACT
BACKGROUND: To analyze the factors affecting the loss of correction effect in patients with congenital scoliosis after one stage posterior hemivertebra resection, orthosis, fusion and internal fixation. METHODS: Thirty-nine patients with congenital scoliosis (CS) who underwent one-stage posterior hemivertebra resection, orthosis, fusion and internal fixation were retrospectively included in Hebei Children's Hospital General demographic information of patients was collected. Preoperative and postoperative imaging indicators were compared, Including cobb Angle of the main curvature of the spine, segmental Cobb Angle, compensatory cephalic curve, compensatory curve on the caudal side, segmental kyphosis, coronal balance, sagittal balance, thoracic kyphosis, lumbar lordosis, and apical vertebra translation. Correlation analysis is used to evaluate the factors affecting the loss of judgment and correction effect, and the correlation indicators are included in the multi-factor Logistics regression. RESULTS: In terms of radiographic indicators in the coronal plane, compared to preoperative values, significant improvements were observed in postoperative Cobb Angle of main curve (8.00°±4.62° vs. 33.30°±9.86°), Segmental Cobb angle (11.87°±6.55° vs. 31.29°±10.03°), Compensatory cephalic curve (6.22°±6.33° vs. 14.75°±12.50°), Compensatory curve on the caudal side (5.58°±3.43° vs. 12.61°±8.72°), coronal balance (10.95 mm ± 8.65 mm vs. 13.52 mm ± 11.03 mm), and apical vertebra translation (5.96 mm ± 5.07 mm vs. 16.55 mm ± 8.39 mm) (all P < 0.05). In the sagittal plane, significant improvements were observed in Segmental kyposis Angle (7.60°±9.36° vs. 21.89°±14.62°, P < 0.05) as compared to preoperative values. At the last follow-up, Segmental kyphosis Angle (6.09°±9.75° vs. 21.89°±14.62°, P < 0.05), Thoracic kyphosis (26.57°±7.68° vs. 24.06°±10.49°, P < 0.05) and Lumbar lordosis (32.12°±13.15° vs. 27.84°±16.68°, P < 0.05) had statistical significance compared with the preoperative department. The correlation analysis showed that the correction effect of the main curve Cobb angle was correlated with fixed segment length (rs=-0.318, P = 0.048), postoperative segment Cobb angle (rs=-0.600, P < 0.001), preoperative apical vertebra translation (rs = 0.440, P = 0.005), and spinal cord malformation (rs=-0.437, P = 0.005). The correction effect of segmental kyphosis was correlated with age (rs = 0.388, P = 0.037). The results of the multivariate logistic regression analysis revealed that postoperative segmental Cobb angle > 10° (OR = 0.011, 95%CI:0.001-0.234, P = 0.004), associated spinal cord anomalies (OR = 24.369, 95%CI:1.057-561.793, P = 0.046), and preoperative apical translation > 10 mm (OR = 0.012, 95%CI:0.000-0.438, P = 0.016) were influential factors in the progression of the main curve Cobb angle. CONCLUSION: The one-stage posterior hemivertebra resection and short-segment corrective fusion with internal fixation are effective means to treat congenital scoliosis. However, attention should be paid to the loss of correction and curve progression during follow-up. Patients with spinal cord malformation and a large preoperative apical vertebra translation have a greater risk of losing the correction after surgery.
Subject(s)
Kyphosis , Lordosis , Scoliosis , Spinal Fusion , Child , Humans , Scoliosis/diagnostic imaging , Scoliosis/surgery , Scoliosis/congenital , Lordosis/diagnostic imaging , Lordosis/surgery , Retrospective Studies , Treatment Outcome , Kyphosis/diagnostic imaging , Kyphosis/surgery , Braces , Spinal Fusion/methods , Thoracic Vertebrae/diagnostic imaging , Thoracic Vertebrae/surgery , Follow-Up Studies , Lumbar Vertebrae/diagnostic imaging , Lumbar Vertebrae/surgeryABSTRACT
There has been few studies focusing on the disc pressure of the upper thoracic spine and it still lacks the quantitative pressure measurement of each spinal disc segment. The aim of this study was to study the pressure changes of intervertebral disc in porcine upper thoracic spine using pressure-sensitive film. Twelve porcine thoracic motion segments were harvested and successively loaded with vertical loads of 100 N, 150 N, and 200 N during 5° of anterior flexion, 5° of posterior extension and 5° of lateral bending. The resulting pressure values were measured. During anterior flexion, the anterior annulus of all segments at all loads showed higher mean pressure values than those during vertical compression, whereas the posterior annulus did not show higher mean values. During posterior extension, the anterior annulus of all segments showed lower mean pressure values than those during vertical compression, whereas the posterior annulus did not show lower mean pressure values. During lateral bending, the annulus of all segments showed higher mean pressure values than those during vertical compression. The posterior thoracic vertebra plays an important role in the motion of the upper thoracic vertebral segment and pressure distribution. During lateral bending, the concave side pressure of the annulus increases obviously, suggesting that asymmetrical force is a contributory factor for scoliosis progression.
Subject(s)
Disease Progression , Pressure , Scoliosis/physiopathology , Thoracic Vertebrae/physiopathology , Animals , Disease Models, Animal , Female , Range of Motion, Articular , Stress, Mechanical , SwineABSTRACT
OBJECTIVE: To analyze the pressure change and distribution of the intervertebral disc of upper thoracic spine in vertical pressure and 5° flexion, extension, or lateral bending. METHODS: Twelve thoracolumbar spinal specimens were harvested from mini pigs and were divided into 2 groups (n=6). T1, 2, T3, 4, T5, 6, and T7, 8 segments were included in one group, and T2, 3, T4, 5, T6, 7, and T8, 9 segments were included in the other group. The data from both groups represented the complete upper thoracic vertebra data. Biomechanical machine and pressure sensitive film were used to measure the pressure on the vertebral columns under loadings of 100, 150, and 200 N in vertical pressures and 5° flexion, extension, or lateral bending. The pressure change of each intervertebral disc under different loads and in different movement conditions was analyzed. RESULTS: In flexion, the anterior annulus pressure of the upper thoracic vertebra increased (P<0.05), whereas the posterior annulus pressure showed no significant change (P>0.05) or an increasing trend (P<0.05). In extension, the anterior annulus pressure of the upper thoracic vertebra decreased (P<0.05), whereas the posterior annulus pressure decreased (P<0.05) or had no obvious change (P>0.05). In lateral bending, the pressure on the concave side of the annulus increased significantly (P<0.05). CONCLUSIONS: The upper thoracic vertebra has unique biomechanical characteristics under different loadings; moreover, the posterior vertebral structure plays an important role in the movement of the upper thoracic vertebral segment and pressure distribution. In lateral bending of the upper thoracic vertebra, the concave side pressure will increase significantly, which suggests that asymmetrical force is an important cause of scoliosis progression. Gravity plays an important role in the progression of scoliosis.