Contributed Review: Advanced three-dimensional laser radar imaging with the airborne optical systems testbed.

We describe the development of a state-of-the-art airborne 3D laser radar system capable of area coverage rates in excess of 150 km2/h. The ladar testbed can operate day and night and uses a low-power, eye-safe, and covert near-IR laser transmitter and a large-pixel-format photon-counting detector array coupled with a precision, fast-scanning, beam pointing mechanism. Mission areas include wide-area down-looking high-resolution open terrain and foliage-penetrating imaging, side-looking and up-looking laser ranging and tracking, and sensor fusion with electro-optical infrared cameras and hyperspectral payloads. We describe the airborne optical systems testbed ladar system, present recently collected 3D data, and discuss testbed configurations that can support advanced imaging applications.

Diffuse optical monitoring of peripheral tissues during uncontrolled internal hemorrhage in a porcine model.

Reliable, continuous and noninvasive blood flow and hemoglobin monitoring in trauma patients remains a critical, but generally unachieved goal. Two optical sensing methods - diffuse correlation spectroscopy (DCS) and diffuse reflectance spectroscopy (DRS) - are used to monitor and detect internal hemorrhage. Specifically, we investigate if cutaneous perfusion measurements acquired using DCS and DRS in peripheral (thighs and ear-lobe) tissues could detect severe hemorrhagic shock in a porcine model. Four animals underwent high-grade hepato-portal injury in a closed abdomen, to induce uncontrolled hemorrhage and were subsequently allowed to bleed for 10 minutes before fluid resuscitation. DRS and DCS measurements of cutaneous blood flow were acquired using fiber optical probes placed on the thigh and earlobe of the animals and were obtained repeatedly starting from 1 to 5 minutes pre-injury, up to several minutes post shock. Clear changes were observed in measured optical spectra across all animals at both sites. DCS-derived cutaneous blood flow decreased sharply during hemorrhage, while DRS-derived vascular saturation and hemoglobin paralleled cardiac output. All derived optical parameters had the steepest changes during the rapid initial hemorrhage unambiguously. This suggests that a combined DCS and DRS based device might provide an easy-to-use, non-invasive, internal-hemorrhage detection system that can be used across a wide array of clinical settings.

High Frequency Sampling of TTL Pulses on a Raspberry Pi for Diffuse Correlation Spectroscopy Applications.

Diffuse Correlation Spectroscopy (DCS) is a well-established optical technique that has been used for non-invasive measurement of blood flow in tissues. Instrumentation for DCS includes a correlation device that computes the temporal intensity autocorrelation of a coherent laser source after it has undergone diffuse scattering through a turbid medium. Typically, the signal acquisition and its autocorrelation are performed by a correlation board. These boards have dedicated hardware to acquire and compute intensity autocorrelations of rapidly varying input signal and usually are quite expensive. Here we show that a Raspberry Pi minicomputer can acquire and store a rapidly varying time-signal with high fidelity. We show that this signal collected by a Raspberry Pi device can be processed numerically to yield intensity autocorrelations well suited for DCS applications. DCS measurements made using the Raspberry Pi device were compared to those acquired using a commercial hardware autocorrelation board to investigate the stability, performance, and accuracy of the data acquired in controlled experiments. This paper represents a first step toward lowering the instrumentation cost of a DCS system and may offer the potential to make DCS become more widely used in biomedical applications.

Near infrared luminescent oxygen nanosensors with nanoparticle matrix tailored sensitivity.

The development of sensors for noninvasive determination of oxygen levels in live cells and tissues is critical for the understanding of cellular functions, as well as for monitoring the status of disease, such as cancer, and for predicting the efficacy of therapy. We describe such nontoxic, targeted, and ratiometric 30 nm oxygen nanosensors made of polyacrylamide hydrogel, near-infrared (NIR) luminescent dyes, and surface-conjugated tumor-specific peptides. They enabled noninvasive real-time monitoring of oxygen levels in live cancer cells under normal and hypoxic conditions. The required sensitivity, brightness, selectivity, and stability were achieved by tailoring the interaction between the nanomatrix and indicator dyes. The developed nanosensors may become useful for in vivo oxygen measurements.