Mechanical, physical and thermal properties of composite materials produced with the basidiomycete Fomes fomentarius.

BACKGROUND: To achieve climate neutrality, fundamentally new concepts of circularity need to be implemented by the building sector as it contributes to 40% of anthropogenic CO2 emission. Fungal biotechnology can make a significant contribution here and help eliminate fossil dependency for building material production. Recently, we have shown that the medicinal polypore Fomes fomentarius feeds well on renewable lignocellulosic biomass and produces composite materials that could potentially replace fossil fuel-based expanded polystyrene as insulation material. RESULTS: In this study, we explored the mechanical, physical, and thermal properties of F. fomentarius-based composite materials in more detail and determined key performance parameters that are important to evaluate the usability of F. fomentarius-based composite materials in the construction sector. These parameters were determined according to European standards and included compressive strength, modulus of elasticity, thermal conductivity, water vapour permeability, and flammability of uncompressed composites as well as flexural strength, transverse tensile strength, and water absorption capacity of heat-pressed composites, among others. We could show that uncompressed composites obtained from F. fomentarius and hemp shives display a thermal conductivity of 0.044 W (m K)-1 which is in the range of natural organic fibres. A water vapour permeability of 1.72 and classification into flammability class B1 clearly surpasses fossil-based insulation materials including expanded polystyrene and polyurethane. We could furthermore show that heat-pressing can be used to reliably generate stiff and firm particleboards that have the potential to replace current wood-based particleboards that contain synthetic additives. X-ray microcomputed tomography finally visualized for the first time the growth of hyphae of F. fomentarius on and into the hemp shive substrates and generated high-resolution images of the microstructure of F. fomentarius-based composites. CONCLUSION: This study demonstrates that fungal-based composites produced with F. fomentarius partially meet or even exceed key performance parameters of currently used fossil fuel-based insulation materials and can also be used to replace particleboards.

Nettle, a Long-Known Fiber Plant with New Perspectives.

The stinging nettle Urticadioica L. is a perennial crop with low fertilizer and pesticide requirements, well adapted to a wide range of environmental conditions. It has been successfully grown in most European climatic zones while also promoting local flora and fauna diversity. The cultivation of nettle could help meet the strong increase in demand for raw materials based on plant fibers as a substitute for artificial fibers in sectors as diverse as the textile and automotive industries. In the present review, we present a historical perspective of selection, harvest, and fiber processing features where the state of the art of nettle varietal selection is detailed. A synthesis of the general knowledge about its biology, adaptability, and genetics constituents, highlighting gaps in our current knowledge on interactions with other organisms, is provided. We further addressed cultivation and processing features, putting a special emphasis on harvesting systems and fiber extraction processes to improve fiber yield and quality. Various uses in industrial processes and notably for the restoration of marginal lands and avenues of future research on this high-value multi-use plant for the global fiber market are described.

Establishment of the basidiomycete Fomes fomentarius for the production of composite materials.

BACKGROUND: Filamentous fungi of the phylum Basidiomycota are considered as an attractive source for the biotechnological production of composite materials. The ability of many basidiomycetes to accept residual lignocellulosic plant biomass from agriculture and forestry such as straw, shives and sawdust as substrates and to bind and glue together these otherwise loose but reinforcing substrate particles into their mycelial network, makes them ideal candidates to produce biological composites to replace petroleum-based synthetic plastics and foams in the near future. RESULTS: Here, we describe for the first time the application potential of the tinder fungus Fomes fomentarius for lab-scale production of mycelium composites. We used fine, medium and coarse particle fractions of hemp shives and rapeseed straw to produce a set of diverse composite materials and show that the mechanical materials properties are dependent on the nature and particle size of the substrates. Compression tests and scanning electron microscopy were used to characterize composite material properties and to model their compression behaviour by numerical simulations. Their properties were compared amongst each other and with the benchmark expanded polystyrene (EPS), a petroleum-based foam used for thermal isolation in the construction industry. Our analyses uncovered that EPS shows an elastic modulus of 2.37 ± 0.17 MPa which is 4-times higher compared to the F. fomentarius composite materials whereas the compressive strength of 0.09 ± 0.003 MPa is in the range of the fungal composite material. However, when comparing the ability to take up compressive forces at higher strain values, the fungal composites performed better than EPS. Hemp-shive based composites were able to resist a compressive force of 0.2 MPa at 50% compression, rapeseed composites 0.3 MPa but EPS only 0.15 MPa. CONCLUSION: The data obtained in this study suggest that F. fomentarius constitutes a promising cell factory for the future production of fungal composite materials with similar mechanical behaviour as synthetic foams such as EPS. Future work will focus on designing materials characteristics through optimizing substrate properties, cultivation conditions and by modulating growth and cell wall composition of F. fomentarius, i.e. factors that contribute on the meso- and microscale level to the composite behaviour.

Genetic Variability of Morphological, Flowering, and Biomass Quality Traits in Hemp (Cannabis sativa L.).

Hemp (Cannabis sativa L.) is a bast-fiber crop well-known for the great potential to produce sustainable fibers. Nevertheless, hemp fiber quality is a complex trait, and little is known about the phenotypic variability and heritability of fiber quality traits in hemp. The aim of this study is to gain insights into the variability in fiber quality within the hemp germplasm and to estimate the genetic components, environmental components, and genotype-by-environment (G×E) interactions on fiber quality traits in hemp. To investigate these parameters, a panel of 123 hemp accessions was phenotyped for 28 traits relevant to fiber quality at three locations in Europe, corresponding to climates of northern, central, and southern Europe. In general, hemp cultivated in northern latitudes showed a larger plant vigor while earlier flowering was characteristic of plants cultivated in southern latitudes. Extensive variability between accessions was observed for all traits. Most cell wall components (contents of monosaccharides derived from cellulose and hemicellulose; and lignin content), bast fiber content, and flowering traits revealed large genetic components with low G×E interactions and high broad-sense heritability values, making these traits suitable to maximize the genetic gains of fiber quality. In contrast, contents of pectin-related monosaccharides, most agronomic traits, and several fiber traits (fineness and decortication efficiency) showed low genetic components with large G×E interactions affecting the rankings across locations. These results suggest that pectin, agronomic traits, and fiber traits are unsuitable targets in breeding programs of hemp, as their large G×E interactions might lead to unexpected phenotypes in untested locations. Furthermore, all environmental effects on the 28 traits were statistically significant, suggesting a strong adaptive behavior of fiber quality in hemp to specific environments. The high variability in fiber quality observed in the hemp panel, the broad range in heritability, and adaptability among all traits prescribe positive prospects for the development of new hemp cultivars of excellent fiber quality.