The mechanical stress-strain properties of single electrospun collagen type I nanofibers.

Knowledge of the mechanical properties of electrospun fibers is important for their successful application in tissue engineering, material composites, filtration and drug delivery. In particular, electrospun collagen has great potential for biomedical applications due to its biocompatibility and promotion of cell growth and adhesion. Using a combined atomic force microscopy (AFM)/optical microscopy technique, the single fiber mechanical properties of dry, electrospun collagen type I were determined. The fibers were electrospun from a 80 mg ml(-1) collagen solution in 1,1,1,3,3,3-hexafluro-2-propanol and collected on a striated surface suitable for lateral force manipulation by AFM. The small strain modulus, calculated from three-point bending analysis, was 2.82 GPa. The modulus showed significant softening as the strain increased. The average extensibility of the fibers was 33% of their initial length, and the average maximum stress (rupture stress) was 25 MPa. The fibers displayed significant energy loss and permanent deformations above 2% strain.

Strength and failure of fibrin fiber branchpoints.

See also Weisel JW. Biomechanics in hemostasis and thrombosis. This issue, pp 1027-9; Liu W, Carlisle CR, Sparks EA, Guthold M. The mechanical properties of single fibrin fibers. This issue, pp 1030-6.

The mechanical properties of single fibrin fibers.

SUMMARY BACKGROUND: Blood clots perform the mechanical task of stemming the flow of blood. OBJECTIVES: To advance understanding and realistic modeling of blood clot behavior we determined the mechanical properties of the major structural component of blood clots, fibrin fibers. METHODS: We used a combined atomic force microscopy (AFM)/fluorescence microscopy technique to determine key mechanical properties of single crosslinked and uncrosslinked fibrin fibers. RESULTS AND CONCLUSIONS: Overall, full crosslinking renders fibers less extensible, stiffer, and less elastic than their uncrosslinked counterparts. All fibers showed stress relaxation behavior (time-dependent weakening) with a fast and a slow relaxation time, 2 and 52 s. In detail, crosslinked and uncrosslinked fibrin fibers can be stretched to 2.5 and 3.3 times their original length before rupturing. Crosslinking increased the stiffness of fibers by a factor of 2, as the total elastic modulus, E(0), increased from 3.9 to 8.0 MPa and the relaxed, elastic modulus, E(infinity), increased from 1.9 to 4.0 MPa upon crosslinking. Moreover, fibers stiffened with increasing strain (strain hardening), as E(0) increased by a factor of 1.9 (crosslinked) and 3.0 (uncrosslinked) at strains epsilon > 110%. At low strains, the portion of dissipated energy per stretch cycle was small (< 10%) for uncrosslinked fibers, but significant (approximately 40%) for crosslinked fibers. At strains > 100%, all fiber types dissipated about 70% of the input energy. We propose a molecular model to explain our data. Our single fiber data can now also be used to construct a realistic, mechanical model of a fibrin network.

A comparison of the mechanical and structural properties of fibrin fibers with other protein fibers.

In the past few years a great deal of progress has been made in studying the mechanical and structural properties of biological protein fibers. Here, we compare and review the stiffness (Young's modulus, E) and breaking strain (also called rupture strain or extensibility, epsilon(max)) of numerous biological protein fibers in light of the recently reported mechanical properties of fibrin fibers. Emphasis is also placed on the structural features and molecular mechanisms that endow biological protein fibers with their respective mechanical properties. Generally, stiff biological protein fibers have a Young's modulus on the order of a few Gigapascal and are not very extensible (epsilon(max) < 20%). They also display a very regular arrangement of their monomeric units. Soft biological protein fibers have a Young's modulus on the order of a few Megapascal and are very extensible (epsilon(max) > 100%). These soft, extensible fibers employ a variety of molecular mechanisms, such as extending amorphous regions or unfolding protein domains, to accommodate large strains. We conclude our review by proposing a novel model of how fibrin fibers might achieve their extremely large extensibility, despite the regular arrangement of the monomeric fibrin units within a fiber. We propose that fibrin fibers accommodate large strains by two major mechanisms: (1) an alpha-helix to beta-strand conversion of the coiled coils; (2) a partial unfolding of the globular C-terminal domain of the gamma-chain.

Fibrin fibers have extraordinary extensibility and elasticity.

Blood clots perform an essential mechanical task, yet the mechanical behavior of fibrin fibers, which form the structural framework of a clot, is largely unknown. By using combined atomic force-fluorescence microscopy, we determined the elastic limit and extensibility of individual fibers. Fibrin fibers can be strained 180% (2.8-fold extension) without sustaining permanent lengthening, and they can be strained up to 525% (average 330%) before rupturing. This is the largest extensibility observed for protein fibers. The data imply that fibrin monomers must be able to undergo sizeable, reversible structural changes and that deformations in clots can be accommodated by individual fiber stretching.

Visualization and mechanical manipulations of individual fibrin fibers suggest that fiber cross section has fractal dimension 1.3.

We report protocols and techniques to image and mechanically manipulate individual fibrin fibers, which are key structural components of blood clots. Using atomic force microscopy-based lateral force manipulations we determined the rupture force, FR, f fibrin fibers as a function of their diameter, D, in ambient conditions. As expected, the rupture force increases with increasing diameter; however, somewhat unexpectedly, it increases as FR approximately D1.30+/-0.06. Moreover, using a combined atomic force microscopy-fluorescence microscopy instrument, we determined the light intensity, I, of single fibers, that were formed with fluorescently labeled fibrinogen, as a function of their diameter, D. Similar to the force data, we found that the light intensity, and thus the number of molecules per cross section, increases as I approximately D1.25+/-0.11. Based on these findings we propose that fibrin fibers are fractals for which the number of molecules per cross section increases as about D1.3. This implies that the molecule density varies as rhoD approximately D -0.7, i.e., thinner fibers are denser than thicker fibers. Such a model would be consistent with the observation that fibrin fibers consist of 70-80% water and only 20-30% protein, which also suggests that fibrin fibers are very porous.

Direct observation of one-dimensional diffusion and transcription by Escherichia coli RNA polymerase.

The dynamics of nonspecific and specific Escherichia coli RNA polymerase (RNAP)-DNA complexes have been directly observed using scanning force microscopy operating in buffer. To this end, imaging conditions had to be found in which DNA molecules were adsorbed onto mica strongly enough to be imaged, but loosely enough to be able to diffuse on the surface. In sequential images of nonspecific complexes, RNAP was seen to slide along DNA, performing a one-dimensional random walk. Heparin, a substance known to disrupt nonspecific RNAP-DNA interactions, prevented sliding. These observations suggest that diffusion of RNAP along DNA constitutes a mechanism for accelerated promoter location. Sequential images of single, transcribing RNAP molecules were also investigated. Upon addition of 5 microM nucleoside triphosphates to stalled elongation complexes in the liquid chamber, RNAP molecules were seen to processively thread their template at rates of 1.5 nucleotide/s in a direction consistent with the promoter orientation. Transcription assays, performed with radiolabeled, mica-bound transcription complexes, confirmed this rate, which was about three times smaller than the rate of complexes in solution. This assay also showed that the pattern of pause sites and the termination site were affected by the surface. By using the Einstein-Sutherland friction-diffusion relation the loading force experienced by RNAP due to DNA-surface friction is estimated and discussed.

Wrapping of DNA around the E.coli RNA polymerase open promoter complex.

High-resolution atomic force microscopy (AFM) and biochemical methods were used to analyze the structure of Escherichia coli RNA polymerase.sigma(70) (RNAP) open promoter complex (RP(o)). A detailed analysis of a large number of molecules shows that the DNA contour length of RP(o) is reduced by approximately 30 nm (approximately 90 bp) relative to the free DNA. The DNA bend angle measured with different methods varied from 55 to 88 degrees. The contour length reduction and the DNA bend angle were much less in inactive RNAP-DNA complexes. These results, together with previously published observations, strongly support the notion that during transcription initiation, the promoter DNA wraps nearly 300 degrees around the polymerase. This amount of DNA bending requires an energy of 60 kJ/mol. The structural analysis of the open promoter complexes revealed that two-thirds of the DNA wrapped around the RNAP is part of a region upstream of the transcription start site, whereas the remaining one-third is part of the downstream region. Based on these data, a model of the sigma(70).RP(o) conformation is proposed.

Investigation and modification of molecular structures with the nanoManipulator.

The nanoManipulator system adds a virtual reality interface to an atomic force microscope (AFM), thus providing a tool that enables the user not only to image but also to manipulate nanometer-sized molecular structures. As the AFM tip scans the surface of these structures, the tip-sample interaction forces are monitored, which in turn provide information about the frictional, mechanical, and topological properties of the sample. Computer graphics are used to reconstruct the surface for the user, with color or contours overlaid to indicate additional data sets. Moreover, by means of a force-feedback pen, which is connected to the scanning tip via software, the user can touch the surface under investigation to feel it and to manipulate objects on it. This system has been used to investigate carbon nanotubes, fibrin, DNA, adenovirus, and tobacco mosaic virus. Nanotubes have been bent, translated, and rotated to understand their mechanical properties and to investigate friction on the molecular level. AFM lithography is being combined with the nanoManipulator to investigate the electromechanical properties of carbon nanotubes. The rupture forces of fibrin and DNA have been measured. This article discusses how some of the graphics and interface features of the nanoManipulator made these novel investigations possible. Visitors have used the system to examine chromosomes, bacterial pili fibers, and nanochain aggregates (NCAs). Investigators are invited to apply to use the system as described on the web at http:@www.cs.unc.edu/Research/nano/doc/biovis it.html.

Transcriptional activation via DNA-looping: visualization of intermediates in the activation pathway of E. coli RNA polymerase x sigma 54 holoenzyme by scanning force microscopy.

Scanning force microscopy (SFM) has been used to study transcriptional activation of Escherichia coli RNA polymerase x sigma 54 (RNAP x sigma 54) at the glnA promoter by the constitutive mutant NtrC(D54E,S160F) of the NtrC Protein (nitrogen regulatory protein C). DNA-protein complexes were deposited on mica and images were recorded in air. The DNA template was a 726 bp linear fragment with two NtrC binding sites located at the end and about 460 bp away from the RNAP x sigma 54 glnA promoter. By choosing appropriate conditions the structure of various intermediates in the transcription process could be visualized and analyzed: (1) different multimeric complexes of NtrC(D54E,S160F) dimers bound to the DNA template; (2) the closed complex of RNAP x sigma 54 at the glnA promoter; (3) association between DNA bound RNAP x sigma 54 and NtrC(D54E,S160F) with the intervening DNA looped out; and (4) the activated open promoter complex of RNAP x sigma 54. Measurements of the DNA bending angle of RNAP x sigma 54 closed promoter complexes yielded an apparent bending angle of 49(+/-24) degrees. Under conditions that allowed the formation of the open promoter complex, the distribution of bending angles displayed two peaks at 50(+/-24) degrees and 114(+/-18) degrees, suggesting that the transition from the RNAP x sigma 54 closed complex to the open complex is accompanied by an increase of the DNA bending angle.

Escherichia coli RNA polymerase activity observed using atomic force microscopy.

Fluid tapping-mode atomic force microscopy (AFM) was used to observe Escherichia coli RNA polymerase (RNAP) transcribing two different linear double-stranded (ds) DNA templates. The transcription process was detected by observing the translocation of the DNA template by RNAP on addition of ribonucleoside 5'-triphosphates (NTPs) in sequential AFM images. Stalled ternary complexes of RNAP, dsDNA and nascent RNA were adsorbed onto a mica surface and imaged under continuously flowing buffer. On introduction of all four NTPs, we observed some DNA molecules being pulled through the RNAP, some dissociating from the RNAP and others which did not move relative to the RNAP. The transcription rates were observed to be approximately 0.5-2 bases/s at our NTP concentrations, approximately 5 microM. The RNA transcripts were not unambiguously imaged in fluid. However, in experiments using a small single-stranded (ss) circular DNA template, known as a rolling circle, transcripts up to 1 or 2 microns long could be observed with tapping mode AFM once the samples were dried and imaged in air. This confirmed our observations of the transcriptional activity of RNAP adsorbed onto mica. This work illustrates that the development of tapping-mode in fluid has made it possible to use AFM to follow biological processes at the molecular level and get new insights about the variability of activity of individual molecules bound to a surface.

Scanning force microscopy of DNA deposited onto mica: equilibration versus kinetic trapping studied by statistical polymer chain analysis.

This paper reports a study of the deposition process of DNA molecules onto a mica surface for imaging under the scanning force microscope (SFM). Kinetic experiments indicate that the transport of DNA molecules from the solution drop onto the surface is governed solely by diffusion, and that the molecules are irreversibly adsorbed onto the substrate. A statistical polymer chain analysis has been applied to DNA molecules to determine the deposition conditions that lead to equilibrium and those that result in trapped configurations. Using the appropriate conditions, DNA molecules deposited onto freshly cleaved mica, are able to equilibrate on the surface as in an ideal two-dimensional solution. A persistence length of 53 nm was determined from those molecules. DNA fragments that were labeled on both ends with a horseradish peroxidase streptavidin fusion protein were still able to equilibrate on the surface, despite the additional protein-surface interaction. In contrast, DNA molecules deposited onto glow-discharged mica or H+-exchanged mica do not equilibrate on the surface. These molecules adopt conformations similar to those expected for a simple projection onto the surface plane, suggesting a process of kinetic trapping. These results validate recent SFM application to quantitatively analyze the conformation of complex macromolecular assemblies deposited on mica. Under equilibration conditions, the present study indicates that the SFM can be used to determine the persistence length of DNA molecules to a high degree of precision.

Following the assembly of RNA polymerase-DNA complexes in aqueous solutions with the scanning force microscope.

The capability of the scanning force microscope (SFM) to image molecules in aqueous buffers has opened the exciting possibility of following processes of molecular assembly in real time and in near-physiological environments. This capability is demonstrated in this paper by following the assembly process of RNA polymerase-DNA complexes. DNA fragments deposited on mica and imaged in Hepes/MgCl2 are shown before and after Escherichia coli RNA polymerase holoenzyme is injected in the SFM liquid chamber. The protein can recognize and bind to these DNA fragments within several seconds after injection, suggesting that the protein and the DNA retain their native configuration after deposition and during SFM imaging. A time-lapse sequence depicting the process of assembly of RNA polymerase-DNA complexes is shown. These results represent the first step for acquiring the capabilities to monitor complex biomolecular processes as they take place in ionic solutions and to characterize their spatial organization.

Substrate preparation for reliable imaging of DNA molecules with the scanning force microscope.

A simple method of substrate preparation for imaging circular DNA molecules with the scanning force microscope (SFM) is presented. These biomolecules are adsorbed onto mica that has been soaked in magnesium acetate, sonicated and glow-discharged. The stylus-sample forces that may be endured before sample damage occurs depends on the ambient relative humidity. Images of circular DNA molecules have been obtained routinely using tips specially modified by an electron beam with a radius of curvature, Rc, of about 10 nm [D. Keller and C. Chih-Chung, Surf. Sci. 268 (1992) 333]. The resolution of these adsorbed biomolecules is determined by the Rc. At higher forces individual circular DNA molecules can be manipulated with the SFM stylus. Strategies to develop still sharper probes will be discussed.

Circular DNA molecules imaged in air by scanning force microscopy.

Routine and reproducible imaging of DNA molecules in air with the scanning force microscope (SFM) has been accomplished. Circular molecules of plasmid DNA were deposited onto red mica and imaged under various relative humidities. In related experiments, the first images of the Escherichia coli RNA polymerase-DNA complex have also been obtained. This has been possible by (1) the use of specially modified SFM tips with a consistent radius of curvature of 10 nm or less, to minimize the amount of image distortion introduced by the finite dimensions of commercially available tips, (2) the optimization of a method to deposit and bind DNA molecules to the mica surface in a stable fashion, and (3) careful control of the sample humidity, to prevent solvation of the molecules and detachment from the surface by the scanning tip or stylus. Contact forces in the range of a few nanonewtons are routinely possible in air and in the presence of residual humidity. The spatial resolution of the images appears determined by the radius of curvature of the modified styli, which can be estimated directly from the apparent widths of the DNA molecules in the images.