Polymeric Ionic Liquids Derived from L-Valine for the Preparation of Highly Selective Silica-Supported Stationary Phases in Gas Chromatography.

A series of silica-supported polymeric ionic liquid (PIL)-based stationary phases derived from a vinylic L-valine ionic liquid monomer and divinylbenzene (DVB) as the crosslinking agent have been prepared and studied as gas chromatographic stationary phases. These coated gas chromatographic columns exhibited good thermal stabilities (230-300 °C) and high efficiencies (1700-2700 plates/m), and were characterized using a linear solvation parameter model in order to understand the effects of the amount of DVB on the features of the resulting composite systems. Their retention behavior and separation efficiencies were demonstrated using the Grob test. By tuning the crosslinking degree for the IL-derived stationary phase, the separation selectivity and resolution of different compounds were improved. The different retention behaviors observed for many analytes indicate that these stationary phases may be applicable as new types of GC stationary phases.

Determination of volatile compounds in cider apple juices using a covalently bonded ionic liquid coating as the stationary phase in gas chromatography.

A chromatographic method for the separation of volatile compounds in Asturian cider apple juices has been developed. For this separation purpose, a monocationic imidazolium-based ionic liquid bearing a reactive terminal iodine atom was synthesized by a quaternization-anion exchange chemical sequence. Next, the gas chromatography (GC) stationary phase was prepared by covalently linking the imidazolium monolith to the reactive silanol groups of the inner capillary wall at 70 °C. This coated GC column exhibited good thermal stability (290 °C), as well as good efficiency (2000 plates/m) in the separation of volatile compounds from Asturian apple cider juices, and was characterized using the Abraham solvation parameter model. The intra-day and inter-day precision of the chromatographic method was evaluated, obtaining relative standard deviations from 3.7 to 12.9% and from 7.4 to 18.0%, respectively. Furthermore, recoveries from 82.5 to 122% were achieved. Graphical Abstract Covalent bonding of an ionic liquid to inner column wall led to a great improvement of the separation efficiencies of stationary phases in gas chromatography.

Gas chromatographic analysis of fatty acid methyl esters of milk fat by an ionic liquid derived from L-phenylalanine as the stationary phase.

A Gas Chromatography (GC) method has been developed for the separation and characterization of the different fatty acids in anhydrous milk fat (AMF) by means of an ionic liquid stationary phase, characterized by a monocationic imidazolium salt derived from L-phenylalanine. The inner surface of a fused silica capillary column was modified using this ionic liquid functionality and 3-aminopropyldiethoxymethyl silane. This coated GC column, which exhibited good thermal stability (270°C) and good efficiency (2700 plates/m), has been characterized using the Abraham solvation parameter model. The intra-day and inter-day precision of the method have been evaluated, obtaining relative standard deviations (RSD) from 0.99% to 4.0% and from 2.8% to 9.2%, respectively. Furthermore, recoveries from 90% and 99% have been achieved.

A chemometric approach to characterization of ionic liquids for gas chromatography.

A chemometric study was carried out to characterize three ionic liquid types (ILs) with hexacationic imidazolium, polymeric imidazolium, and phosphonium cationic cores, using a range of contra-anions such as halogens, thiocyanate, boron anions, triflate, and bistriflimide. The solvation parameter model developed by Abraham et al., unsupervised techniques as cluster analysis (CA), and supervised techniques as linear discriminant analysis (LDA), step-LDA, quadratic discriminant analysis (QDA), and multivariate regression techniques as discriminant partial least squares (D-PLS), or multiple linear regression (MLR) were used to characterize the functionalized ILs above. CA established two main groups of phases, those with an acidic H-bond and those with basic ones. Once detected, the two natural groups, a linear and quadratic delimiters with good classification (>96 %) and prediction (>92 %) capacities were computed. The use of step-LDA technique allowed us to establish that a, b, and s solvation parameters were the most discriminant variables. These variables were used for modeling purposes, and a D-PLS and MLR models were constructed using a binary response. The explained variance of categorical variable by the model validated by cross-validation was 65 %, and 94.5 % of ILs were correctly predicted. IL characterization carried out would allow the appropriate selection of phases for gas chromatography (GC).

Analysis of beer volatiles by polymeric imidazolium-solid phase microextraction coatings: Synthesis and characterization of polymeric imidazolium ionic liquids.

Two polymeric ionic liquids, 3-(but-3″-en-1″-yl)-1-[2'-hydroxycyclohexyl]-1H-imidazol-3-ium bis(trifluoromethanesulfonyl)imide (IL-1) and 1-(2'-hydroxycyclohexyl)-3-(4″-vinylbenzyl)-1H-imidazol-3-ium bis(trifluoromethylsulfonyl)imide (IL-2), have been synthesized by a free radical polymerization reaction and used as coatings for solid-phase microextraction (SPME). These new fibers exhibit good film stability, high thermal stability (270-290°C) and long lifetimes, and are used for the extraction of volatile compounds in lemon beer using gas chromatography separation and flame ionization detection. The scanning electron micrographs of the fiber surface revealed a polymeric ionic liquid (PIL) film, which is distributed homogeneously on the fiber. The developed PIL fiber showed good linearity between 50 and 2000µg/L with regression coefficients in the range of 0.996-0.999. The relative standard deviations (RSD) obtained in the peak area were found to vary between 1% and 12%, which assured that adequate repeatability was achieved. The spiked recoveries for three beer samples ranged from 78.4% to 123.6%. Experimental design has been employed in the optimization of extraction factors and robustness assessment. The polymeric IL-1 butenyl fiber showed a greater efficiency compared to the PDMS-DVB (65µm) and CAR-PDMS (75µm) for the extraction of all of the analytes studied.

Polymeric imidazolium ionic liquids as valuable stationary phases in gas chromatography: chemical synthesis and full characterization.

Seven new functionalized polymerizable ionic liquids were chemically prepared, and later applied for the preparation of polymeric stationary phases in gas chromatography. These coated GC columns, which exhibited good thermal stabilities (240-300°C) and very high efficiencies (3120-4200 plates/m), have been characterized using the Abraham solvation parameter model. The chromatographic behavior of these polymeric IL columns has been deeply studied observing excellent selectivities in the separation of many organic substances such as alkanes, ketones, alcohols, amines or esters in mixtures of polar and non polar solvents or fragrances. Remarkably, the challenging separation of xylene isomers has been possible using a bis(trifluoromethylsulfonyl)amide based imidazolium IL coated column as a gas chromatography stationary phase.

Evaluation of new ionic liquids as high stability selective stationary phases in gas chromatography.

Two ionic liquids (ILs), namely (S,S)-1-butyl-3-(2'-hydroxy-cyclohexyl)-3H-imidazol-1-ium tetrafluoroborate and (S,S)-1-butyl-3-(2'-acetyl-cyclohexyl)-3H-imidazol-1-ium tetrafluoroborate have been employed as stationary phases in capillary gas chromatography. These new phases exhibit a column efficiency of 1,600 and 2,100 plates m(-1) for IL 1 and IL 2, respectively, a wide operating temperature range and good thermal stability (bleeding temperature of 250 °C for IL 1 and 160 °C for IL 2). Inverse gas chromatography (GC) analyses were used to study the solvation properties of these ILs through a linear solvation energy model. The application of these ILs as new GC stationary phases was studied. These stationary phases exhibited unique selectivity for many organic substances, such as alkanes, ketones, esters, and aromatic compounds. The efficient separation of several mixtures containing compounds of different polarities and the good separation of fatty acid methyl esters (FAMEs) and cis/trans isomers indicate that these ILs may be applicable as a new type of GC stationary phases.

A novel method for the determination of total 1,3-octanediols in apple juice via 1,3-dioxanes by solid-phase microextraction and high-speed gas chromatography.

In this work, a novel, simple and fast method based on solid-phase microextraction (SPME) followed by high-speed gas chromatography (HSGC) was developed for the analysis of total 1,3-octanediols in apple juices by means of derivatization reaction to volatile 1,3-dioxanes. The derivatization reaction, SPME conditions, glycosidically bound fraction and 1,3-nonanediol as a surrogate standard were studied. The formation of 1,3-dioxanes from 1,3-diols was confirmed by GC-MS. The method was validated obtaining a regression coefficient (r(2)) of 0.9996, precisions between 0.3 and 9.8%, extraction recoveries in the range 94.7-112.2% and LOD of 2.9 microg l(-1). Experimental design has been employed in the optimization of extraction factors and robustness assessment. The method was applied to the analysis of 21 Asturian apple varieties finding a double reciprocal relationship between the concentrations of saturated and unsaturated 1,3-octanediol.