ABSTRACT
Starvation and changing feeding conditions are frequently characteristics of wastewater treatment plants. They are typical causes of unsteady-state operation of biological systems and provoke cellular stress. The response of a membrane bioreactor functioning under feed-induced stress conditions is studied here. In order to simplify and considerably amplify the response to stress and to obtain a reference model, a pure culture of Pseudomonas putida was selected instead of an activated sludge and a sole substrate (salicylic acid) was employed. The system degraded salicylic acid at 100-1100mg/L with a high level of efficiency, showed rapid acclimation without substrate or product inhibition phenomena and good stability in response to unsteady states caused by feed variations. Under starvation conditions, specific degradation rates of around 15mg/gh were achieved during the adaptation of the biomass to the new conditions and no biofilm formation was observed during the first days of experimentation using an initial substrate to microorganisms ratio lower than 0.1. When substrate was added to the reactor as pulses resulting in rapidly changing concentrations, P. putida growth was observed only for substrate to microorganism ratios higher than 0.6, with a maximum YX/S of 0.5g/g. Biofilm development under changing feeding conditions was fast, biomass detachment only being significant for biomass concentrations on the membrane surface that were higher than 16g/m(2).
Subject(s)
Bioreactors/microbiology , Pseudomonas putida/metabolism , Salicylic Acid/toxicity , Water Pollutants, Chemical/toxicity , Algorithms , Biofilms , Biomass , Filtration , Hydrogen-Ion Concentration , Membranes, Artificial , Pseudomonas putida/drug effects , Sewage/chemistry , Spectrophotometry, UltravioletABSTRACT
The aim of this work consists on determining biomass fuels properties and studying their relation with fixed and variable costs of stores and handling systems. To do that, dimensions (length and diameter), bulk density, particle density and durability of several brands and batches of wood pellets and briquettes were tested, according to international standards. Obtained results were compared with those in literature. Bulk density tests were applied for several other biomass fuels too, and later used to determinate which ones of all the biomass-fuels tested are economically more profitable for a typical transport/store system made of a screw conveyor and a concrete bunker silo.
