Enhancing Thermomechanical Strength and Thermal Stability of Poly(dicyclopentadiene) Composites through Cost-Effective Fly Ash Reinforcement for Structural and Impact Applications.

Poly(dicyclopentadiene) (poly-DCPD) is a thermoset with potential for high-performance applications. In this research, epoxy resin was blended with different concentrations of fly ash class F particles at 0.0, 1.0, 10.0, and 50.0 wt.%, aiming to improve its use as a high-volume structural material by decreasing costs and reducing its negative environmental impact through using fly ash particles. A planetary Thinky mixer was used to initially mix the resin with the curing agent, followed by incorporating a Grubbs catalyst. The microstructures were analyzed using scanning electron microscopy (SEM), where particles were found to be homogeneously distributed over the polymer matrix. The thermomechanical behavior was evaluated via curing, compression, dynamic mechanical analysis (DMA), and thermo-gravimetric analysis (TGA). Nanoindentation tests were also conducted. Fly ash was found to decelerate the curing of the resin through the release of calcium ions that enhanced the exothermic reaction.

Additive manufacturing against the Covid-19 pandemic: a technological model for the adaptability and networking.

This investigation analyzes the main contributions that additive manufacturing (AM) technology provides to the world in fighting against the pandemic COVID-19 from a materials and applications perspective. With this aim, different sources, which include academic reports, initiatives, and industrial companies, have been systematically analyzed. The AM technology applications include protective masks, mechanical ventilator parts, social distancing signage, and parts for detection and disinfection equipment (Ju, 2020). There is a substantially increased number of contributions from AM technology to this global issue, which is expected to continuously increase until a sound solution is found. The materials and manufacturing technologies in addition to the current challenges and opportunities were analyzed as well. These contributions came from a lot of countries, which can be used as a future model to work in massive collaboration, technology networking, and adaptability, all lined up to provide potential solutions for some of the biggest challenges the human society might face in the future.

Underlying Physics of Conductive Polymer Composites and Force Sensing Resistors (FSRs). A Study on Creep Response and Dynamic Loading.

Force Sensing Resistors (FSRs) are manufactured by sandwiching a Conductive Polymer Composite (CPC) between metal electrodes. The piezoresistive property of FSRs has been exploited to perform stress and strain measurements, but the rheological property of polymers has undermined the repeatability of measurements causing creep in the electrical resistance of FSRs. With the aim of understanding the creep phenomenon, the drift response of thirty two specimens of FSRs was studied using a statistical approach. Similarly, a theoretical model for the creep response was developed by combining the Burger's rheological model with the equations for the quantum tunneling conduction through thin insulating films. The proposed model and the experimental observations showed that the sourcing voltage has a strong influence on the creep response; this observation-and the corresponding model-is an important contribution that has not been previously accounted. The phenomenon of sensitivity degradation was also studied. It was found that sensitivity degradation is a voltage-related phenomenon that can be avoided by choosing an appropriate sourcing voltage in the driving circuit. The models and experimental observations from this study are key aspects to enhance the repeatability of measurements and the accuracy of FSRs.